Aleksandra Vitalievna Ivanovskaya
Research Subjects
Aleksandra Vitalievna Ivanovskaya has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Aleksei N. Ivanovskii2 shared publications
- Alexander Rybak
Don State Technical University
1 shared publication Alexey A. Khalyavkin
1 shared publication- Alexey Pelipenko
Agribusiness Faculty, Don State Technical University, 1, Gagarin Sq., Rostov-on-Don 344003, Russia
1 shared publication Danil A. Golovan
1 shared publication- Oleg Konstantinovich Bezjukov
Admiral Makarov State University of Maritime and Inland Shipping
1 shared publication
Latest Publications
- Open Access
- 21 June 2026
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 87,p. 95-105
Influence of boundary conditions on the value of the natural frequency of transverse vibrations of the ship's shaft line
The paper studies the effect of the flexibility of the shaft bearings on the performance of the entire ship's shaft line. It analyzes the existing values of the stiffness coefficient used for elastic stops in the calculation schemes for calculating lateral vibrations and centering the ship's shaft line. The elastic supports model the stern shaft bearing and the entire shaft line. It is noted that the antifriction materials used for shaft bearings can be metallic or non-metallic. It is pointed out that the ship's shaft line is a complex dynamic system, and the phenomenon of resonance during lateral vibrations occurs when the frequency of external excitation approaches the natural frequency of vibration of the shaft line itself. It is noted that this phenomenon is characterized by significant increases in the amplitudes of vibrations and an unstable state of the entire shaft system. This leads to serious damage and accidents of all elements and nodes of the entire propulsion complex of the vessel. The results obtained in this work in the form of graphs of the change in the natural frequency of the studied single-span beam relative to the adopted elastic boundary conditions, which characterize the entire shaft line of the shaft line, are nonlinear.
- 21 June 2026
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 87,p. 95-105
Open AccessInfluence of boundary conditions on the value of the natural frequency of transverse vibrations of the ship's shaft line
The paper studies the effect of the flexibility of the shaft bearings on the performance of the entire ship's shaft line. It analyzes the existing values of the stiffness coefficient used for elastic stops in the calculation schemes for calculating lateral vibrations and centering the ship's shaft line. The elastic supports model the stern shaft bearing and the entire shaft line. It is noted that the antifriction materials used for shaft bearings can be metallic or non-metallic. It is pointed out that the ship's shaft line is a complex dynamic system, and the phenomenon of resonance during lateral vibrations occurs when the frequency of external excitation approaches the natural frequency of vibration of the shaft line itself. It is noted that this phenomenon is characterized by significant increases in the amplitudes of vibrations and an unstable state of the entire shaft system. This leads to serious damage and accidents of all elements and nodes of the entire propulsion complex of the vessel. The results obtained in this work in the form of graphs of the change in the natural frequency of the studied single-span beam relative to the adopted elastic boundary conditions, which characterize the entire shaft line of the shaft line, are nonlinear.
- Open Access
- 18 June 2025
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 83,p. 75-85
An integrated approach to assessing the impact of stochastic factors on the wear processes of trawl winch bearings
Bearings installed on the shaft of the trawl winch drum are one of the most loaded and critical structural elements. They provide rotation of the drum, perceive significant radial and axial loads arising during setting and sampling of the trawl. The reliability of the bearing assemblies directly affects the uptime of the entire winch, the productivity of the field and the cost of maintenance. This article discusses the main aspects of reliability of bearing assemblies, factors affecting their performance, determination of the load acting on the bearing assembly. The non-stationary nature of the load is determined by many factors, including the hydrodynamic resistance of the trawl during its movement in the aquatic environment, the change in the trawling depth, the uneven filling of the trawl with fishing objects, the effect of sea waves on the vessel, as well as the maneuvering of the vessel during trawling. These factors create a complex range of variable loads affecting the bearing assemblies of the trawl winch drum.
- 18 June 2025
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 83,p. 75-85
Open AccessAn integrated approach to assessing the impact of stochastic factors on the wear processes of trawl winch bearings
Bearings installed on the shaft of the trawl winch drum are one of the most loaded and critical structural elements. They provide rotation of the drum, perceive significant radial and axial loads arising during setting and sampling of the trawl. The reliability of the bearing assemblies directly affects the uptime of the entire winch, the productivity of the field and the cost of maintenance. This article discusses the main aspects of reliability of bearing assemblies, factors affecting their performance, determination of the load acting on the bearing assembly. The non-stationary nature of the load is determined by many factors, including the hydrodynamic resistance of the trawl during its movement in the aquatic environment, the change in the trawling depth, the uneven filling of the trawl with fishing objects, the effect of sea waves on the vessel, as well as the maneuvering of the vessel during trawling. These factors create a complex range of variable loads affecting the bearing assemblies of the trawl winch drum.
- Open Access
- 18 December 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 77,p. 91-98
Increasing the energy efficiency of a fishing vessel by estimating the motion parameters of a towed object
The optimal mode of towing fishing gear has a direct impact on the energy efficiency of the fishing vessel. To build the combined traction characteristics of the vessel and trawl systems, data are needed on the nominal moments on the winch and engine drum, as well as the traction force in the warp. Estimation of the movement parameters of the towed object will make it possible to haul warps without overloading the trawl winch and the main engine. The paper proposes a block diagram of the algorithm for estimating the motion parameters of a trawl system. Processing of the current measurements of the warp tension in real time is carried out by digital signal processing methods based on the constructed optimal linear filter, which will be used to obtain the tension on the winch without taking into account the noise that occurs both as a result of the operation of the equipment and under the influence of the random nature of the warp tension process itself. and external hydrometeorological factors. Estimation and prediction of dynamic parameters is necessary for the development of an automated control system for a ship's winch, regardless of its purpose. Therefore, the results presented in this paper can be used in solving problems of automation of lifting equipment operating in non-stationary conditions.
- 18 December 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 77,p. 91-98
Open AccessIncreasing the energy efficiency of a fishing vessel by estimating the motion parameters of a towed object
The optimal mode of towing fishing gear has a direct impact on the energy efficiency of the fishing vessel. To build the combined traction characteristics of the vessel and trawl systems, data are needed on the nominal moments on the winch and engine drum, as well as the traction force in the warp. Estimation of the movement parameters of the towed object will make it possible to haul warps without overloading the trawl winch and the main engine. The paper proposes a block diagram of the algorithm for estimating the motion parameters of a trawl system. Processing of the current measurements of the warp tension in real time is carried out by digital signal processing methods based on the constructed optimal linear filter, which will be used to obtain the tension on the winch without taking into account the noise that occurs both as a result of the operation of the equipment and under the influence of the random nature of the warp tension process itself. and external hydrometeorological factors. Estimation and prediction of dynamic parameters is necessary for the development of an automated control system for a ship's winch, regardless of its purpose. Therefore, the results presented in this paper can be used in solving problems of automation of lifting equipment operating in non-stationary conditions.
- Open Access
- 27 November 2023
- Published by Astrakhan State Technical University in Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies
- Vol. 2023 (4) , 55-61
Coordinate separation method for modeling the ship winch drive
The operation of the lifting equipment of a fishing vessel has a number of differences from similar shore devices or cranes and winches operated on transport vessels. The difference from coastal equipment is the external impact from the marine environment, manifested by on-board or keel rolling. The lifting equipment of a transport vessel, influenced by hydrometeorological factors, transports cargo with constant parameters, i.e. the effective load can be calculated according to a proven methodology in accordance with standards. The relevance of the task of improving the methodology for calculating operational loads acting on the lifting equipment of a fishing vessel is confirmed. The accuracy of mathematical models plays a key role in the development of an automatic control system, which must be taken into account when designing modern fishing vessels. When developing mathematical models, both hydrometeorological factors (wind and wave load, surface and underwater current) and variable parameters of the towed object (mass, hydrodynamic resistance, shape, movement on the ground, etc.) should be considered. Forecasting the dynamic behavior of each element of the "ship-winch-cable-towed object" system it will ensure operational and environmental safety, reliability, as well as energy and economic efficiency of the new fishing vessel as a whole. The method of coordinate separation used for mathematical modeling of the ship's winch drive, the operation of which is characterized by non-stationary dynamic processes arising from the effects of hydrometeorological factors and variable loading from the towed object, is presented. The advantage of this modeling method is the choice of any coordinate as an independent one, without being tied to the actual location.
- 27 November 2023
- Published by Astrakhan State Technical University in Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies
- Vol. 2023 (4) , 55-61
Open AccessCoordinate separation method for modeling the ship winch drive
The operation of the lifting equipment of a fishing vessel has a number of differences from similar shore devices or cranes and winches operated on transport vessels. The difference from coastal equipment is the external impact from the marine environment, manifested by on-board or keel rolling. The lifting equipment of a transport vessel, influenced by hydrometeorological factors, transports cargo with constant parameters, i.e. the effective load can be calculated according to a proven methodology in accordance with standards. The relevance of the task of improving the methodology for calculating operational loads acting on the lifting equipment of a fishing vessel is confirmed. The accuracy of mathematical models plays a key role in the development of an automatic control system, which must be taken into account when designing modern fishing vessels. When developing mathematical models, both hydrometeorological factors (wind and wave load, surface and underwater current) and variable parameters of the towed object (mass, hydrodynamic resistance, shape, movement on the ground, etc.) should be considered. Forecasting the dynamic behavior of each element of the "ship-winch-cable-towed object" system it will ensure operational and environmental safety, reliability, as well as energy and economic efficiency of the new fishing vessel as a whole. The method of coordinate separation used for mathematical modeling of the ship's winch drive, the operation of which is characterized by non-stationary dynamic processes arising from the effects of hydrometeorological factors and variable loading from the towed object, is presented. The advantage of this modeling method is the choice of any coordinate as an independent one, without being tied to the actual location.
- Open Access
- 18 September 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 76,p. 111-119
Specific features of the development of an adaptive control system for special ship devices on the example of a trawl winch of a fishing vessel
Траловая лебедка, являясь частью вспомогательной энергетической установки рыбопромыслового судна, во время своей работы в значительной мере влияет на безопасность, надежность, энергоэффективность судна в целом. Это обусловлено особенностью работы траловой лебедки. Кроме действующих внешних гидрометеорологических факторов, на динамические показатели машины большое влияние оказывает переменность нагружения со стороны буксируемого и поднимаемого орудия лова с уловом. Такие нестационарные воздействия оказывают негативное влияние на работоспособность и надежность работы оборудования. Данный вид грузоподъемных устройств на рыбопромысловом судне не имеет резерва. Поэтому при его выходе из строя останавливается и технологический процесс промысла, что влечет большие экономические потери. Для плавного регулирования работы лебедки в нестационарных условиях в работе предлагается система адаптивного управления с повышенным уровнем надежности, позволяющая плавно реагировать на перепады нагрузки. Разработана схема системы управления, а также представлена схема самого привода траловой лебедки, чувствительного к изменению нагружения, суть которого заключается в подключении резервного гидромотора при превышении нагружения со стороны буксируемого или поднимаемого объекта.
- 18 September 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 76,p. 111-119
Open AccessSpecific features of the development of an adaptive control system for special ship devices on the example of a trawl winch of a fishing vessel
Траловая лебедка, являясь частью вспомогательной энергетической установки рыбопромыслового судна, во время своей работы в значительной мере влияет на безопасность, надежность, энергоэффективность судна в целом. Это обусловлено особенностью работы траловой лебедки. Кроме действующих внешних гидрометеорологических факторов, на динамические показатели машины большое влияние оказывает переменность нагружения со стороны буксируемого и поднимаемого орудия лова с уловом. Такие нестационарные воздействия оказывают негативное влияние на работоспособность и надежность работы оборудования. Данный вид грузоподъемных устройств на рыбопромысловом судне не имеет резерва. Поэтому при его выходе из строя останавливается и технологический процесс промысла, что влечет большие экономические потери. Для плавного регулирования работы лебедки в нестационарных условиях в работе предлагается система адаптивного управления с повышенным уровнем надежности, позволяющая плавно реагировать на перепады нагрузки. Разработана схема системы управления, а также представлена схема самого привода траловой лебедки, чувствительного к изменению нагружения, суть которого заключается в подключении резервного гидромотора при превышении нагружения со стороны буксируемого или поднимаемого объекта.
- Open Access
- 10 January 2022
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 21 (4) , 337-345
Synchronization in multi-motor hydromechanical systems
Introduction. The paper submits the analysis of existing design solutions of flow dividers used to synchronize hydraulic drives of working bodies of technological and mobile machines. The market demands for multithreaded throttle flow dividers without valves with the controlled division ratio, such as multi-axle vehicle chassis, are identified. The objective of the work was to analyze the possibility and rationale for developing a throttle four-way flow divider without valves with sensing elements of the Venturi tube type. The solution should provide the synchronicity of movement (rotation) of more than three working bodies of technological and mobile machines.Materials and Methods. A patent search for the designs of hydraulic flow dividers is carried out, and systems that require the division of the hydraulic fluid flow into more than two executive bodies are considered. An upgrade option, which allows dividing the flow into four branches, is proposed for the design of a three-channel throttle flow divider without valves.Results. The urgency of developing a multithreaded throttle flow divider without valves for application in industrial and mobile machines is validated. Two types of four-flow dividers are considered, their weaknesses are indicated. It is noted that the development of a multithreaded throttle flow divider based on the designs created in 1989 and 1991 will reduce the number of hydraulic pumps and get rid of the series connection of double-flow dividers. In this way, it is possible to reduce pressure losses in the hydraulic system and implement adaptive control of hydraulic motors of multi-motor mobile machines. The possibility to obtain a divider/combiner into four flows by adding an outlet chamber connected to the membrane chamber through a channel entering the Venturi nozzle on the basis of a three-flow throttle divider is shown. The principle of operation of such equipment is described.Discussion and Conclusions. The principles of construction of throttle flow dividers without valves are considered. An upgrade option is proposed to increase the number of division channels from three to four. However, to validate the operability of this design, a numerical analysis of the various modes of operation of the divider is required — calculation of the reduced volumetric stiffness of its working cavities. The information obtained can be used to modernize the hydraulic units of technological and mobile machines, increase their reliability, manufacturability, and efficiency. The issues that need to be solved in further research are identified.
- 10 January 2022
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 21 (4) , 337-345
Open AccessSynchronization in multi-motor hydromechanical systems
Introduction. The paper submits the analysis of existing design solutions of flow dividers used to synchronize hydraulic drives of working bodies of technological and mobile machines. The market demands for multithreaded throttle flow dividers without valves with the controlled division ratio, such as multi-axle vehicle chassis, are identified. The objective of the work was to analyze the possibility and rationale for developing a throttle four-way flow divider without valves with sensing elements of the Venturi tube type. The solution should provide the synchronicity of movement (rotation) of more than three working bodies of technological and mobile machines.Materials and Methods. A patent search for the designs of hydraulic flow dividers is carried out, and systems that require the division of the hydraulic fluid flow into more than two executive bodies are considered. An upgrade option, which allows dividing the flow into four branches, is proposed for the design of a three-channel throttle flow divider without valves.Results. The urgency of developing a multithreaded throttle flow divider without valves for application in industrial and mobile machines is validated. Two types of four-flow dividers are considered, their weaknesses are indicated. It is noted that the development of a multithreaded throttle flow divider based on the designs created in 1989 and 1991 will reduce the number of hydraulic pumps and get rid of the series connection of double-flow dividers. In this way, it is possible to reduce pressure losses in the hydraulic system and implement adaptive control of hydraulic motors of multi-motor mobile machines. The possibility to obtain a divider/combiner into four flows by adding an outlet chamber connected to the membrane chamber through a channel entering the Venturi nozzle on the basis of a three-flow throttle divider is shown. The principle of operation of such equipment is described.Discussion and Conclusions. The principles of construction of throttle flow dividers without valves are considered. An upgrade option is proposed to increase the number of division channels from three to four. However, to validate the operability of this design, a numerical analysis of the various modes of operation of the divider is required — calculation of the reduced volumetric stiffness of its working cavities. The information obtained can be used to modernize the hydraulic units of technological and mobile machines, increase their reliability, manufacturability, and efficiency. The issues that need to be solved in further research are identified.