YKYevhen Kryzhanivskyi

Yevhen Kryzhanivskyi

*This is an algorithmically generated author record based on publicly available information.

Yevhen Kryzhanivskyi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Scientific-methodological framework for selecting an onboard equipment variant to solve the problem of aircraft modernization

    by Viktor Yerko, Andrii Shatrov, Andrii Liubarets, Yevhen Kryzhanivskyi

    The article analyzes scientific and methodological approaches to justifying the composition of onboard equipment for aircraft during their modernization. It is determined that onboard aircraft equipment is a complex technical system. It has been established that the use of a methodological framework for selecting an onboard equipment variant within traditional approaches is not expedient due to the fundamental limitations of single-criterion approaches and the limited functionality of applied practically oriented methods. This leads to the conclusion that there is a mismatch between the practical need for substantiation in decision-making when selecting the composition of onboard equipment during modernization (or creation) of aircraft and the limited capabilities of existing methods. It is shown that to effectively solve the problem of selecting the composition of onboard equipment during aircraft modernization, it is advisable to combine the methodology of multi-criteria optimization with the advantages of a systems approach. Therefore, the authors believe that the selection of onboard equipment composition for aircraft should be carried out by combining the advantages of both an unstructured approach and a formal structured approach.

  • Open Access

    A METHODICAL APPROACH TO THE FORMATION OF DANGER ZONES IN THE DEVELOPMENT OF PROGRAMS AND METHODS OF FLIGHT TESTS OF GROUND-BASED GUIDED MISSILES

    by Y Kryzhanivskyi, A Liubarets, V Hmyria, A Shatrov

    The article presents a methodological approach to the formation of hazard zones during the field testing of surface-to-surface and surface-to-air guided missiles, based on the study of possible scenarios for the formation and development of emergency situations caused by failures of their components. The list of possible failure scenarios and related emergencies is formed based on the results of the circuit analysis of the design of the studied sample and functional and morphological decomposition, with preference given to the functional feature. To form a list of possible emergency situations, a functional and morphological decomposition is carried out with preference given to the functional feature, which results in the distribution of the causes of malfunctions and damage that lead to emergencies into groups. To assess the serviceable condition, the logical-probabilistic method is used, the essence of which is that the structure of the object under study is described by the function of logic algebra, and the quantitative assessment of the serviceable condition is based on the methods of reliability theory. As a result of this transformation, the probability function will already act as a probability of truth as a function of the algebra of logic. In this case, the structure of the object under study is described by a function of the algebra of logic, and the quantitative assessment of the operable state is described by a probabilistic function. It is convenient to represent the function of logic algebra in disjunctive normal form. Each conjunction of the disjunctive normal form represents a path leading to an unsafe state. The choice of an algorithm for the practical transformation of a logic algebra function into a probabilistic function is made taking into account the complexity of the calculations and the requirements for the accuracy of the results. The most suitable algorithms in this sense are the orthogonalization algorithm, the recursive algorithm, and the path-building algorithm. For software implementation, the most convenient is the recurrent algorithm, which is an acceptable compromise between simplicity and result error. As an example, a logical scheme for the formation of possible scenarios for the development of abnormal situations that lead to the transition of a guided missile to an uncontrolled flight is presented.

  • Open Access

    Методичний підхід щодо обґрунтування строків придатності до використання радіоелектронного обладнання ЛА військового призначення поза межами призначених показників

    by Вікторія Мельник, Сергій Сторожук, Євген Крижанівський, Андрій Бабарига

    У статті представлено методичний підхід обґрунтування строків придатності до використання радіоелектронного обладнання літальних апаратів військового призначення по за межами призначених показників. Проведено аналіз робіт в галузі оцінки і прогнозування технічних показників експлуатаційних властивостей технічних систем. Показано, що метод апроксимації сукупністю поліномів, ортогональних на системі рівновіддалених точок, дозволяє отримати числові значення коефіцієнтів апроксимації системи нормальних рівнянь, які мають рішення. При цьому використання процедури незалежного оцінювання коефіцієнтів надає додаткову перевагу. Запропоновано вираз для знаходження елементів коваріаційної матриці похибок оцінок параметрів. При аналізі методу групового урахування аргументів щодо задачі, що розглядається, показано його основний недолік та запропоновано шляхи його усунення. Показано, що при розробці методики оцінки та прогнозування надійності радіоелектронного обладнання літальних апаратів військового призначення необхідно рішити комплекс взаємопов’язаних, внутрішньо суперечливих теоретичних і практичних проблем. При цьому найбільш важливою з них слід вважати проблему вибору типу моделі надійності, її розмірність по параметрам, числу та номенклатурі факторів, що враховуються.

  • Open Access

    Development of an evaluation method using a combined cat swarm optimization algorithm

    by Aqeel Bahr Tarkhan, Heorhii Kuchuk, Iraida Stanovska, Vira Golian, Nataliia Golian, Oksana Zharova, Yevhen Kryzhanivskyi, Andrii Liubarets, Igor Zvershkhovskyi, Artem Fysiuk

    The object of the study is complex dynamic objects with a hierarchical structure. The problem solved in the study is to increase the efficiency of decision-making while ensuring the given reliability. The subject of the study is the process of decision-making in management problems using an improved cat swarm optimization algorithm (CSO), an improved genetic algorithm and evolving artificial neural networks. The proposed method, due to additional and improved procedures, allows you: – to take into account the type of uncertainty of the initial data for setting CA for the local search procedure; – to implement adaptive strategies for finding food sources by CA; – to take into account the experience of the most authoritative CA while conducting local and global search; – to take into account the available computing resources of the state analysis system of complex dynamic objects and determine their required amount for involvement; – to take into account the CA search priority; – to determine the best CA using an improved genetic algorithm; – to conduct training of knowledge bases, which is carried out by training the synaptic weights of the artificial neural network, the type and parameters of the membership function, and architecture of individual elements and the architecture of the artificial neural network as a whole; – to avoid the local extremum problem by using the jump procedure. The proposed method was tested on the example of solving the problem of determining the composition of an operational group of troops (forces) and elements of its operational structure. An example of using the method showed an increase in the efficiency of data processing at the level of 14–19 % by using additional improved procedures. The proposed approach should be used to solve the problems of evaluating complex and dynamic processes characterized by a high degree of complexity


  • Оцінка рівня старіння керованих засобів ураження щодо визначення доцільності ремонту та подальшої експлуатації

    by Євген Крижанівський, Владислав Перегончук, Сергій Сторожук, Андрій Бабарига

    The article provides a methodical approach to determining the expediency of repairs and ways of further operation and modernization. The approach is based on the s-shaped law of evolution of the development of technical systems, which is characterized by the following stages: inception, industrial production, conservation of development, reduction of operational efficiency and includes an assessment of technical and economic factors that influence the decision-making process for modernization.The analysis of the tactical and technical characteristics of guided weapons of different years of development showed that their qualitative development is largely due to the development of the elemental base, which made it possible to implement more complex, science-intensive targeting algorithms and functioning as a whole.Studies of the evolution of the development of the guided weapons based on the s-like law showed that in order to support the growing economic effect, a new or modernized model of weapons should be put into production before the end of the stage t2 – t3, shown in Figure 1. To analyze the impact of individual components on the functioning of the CZU as a whole, the methods of graph theory were used, which will allow describing the goals and functions performed by their subsystems. This will make it possible to present the state of any constituent parts in the form of a hierarchical graph of negative events and their consequences with a vertex.For a comprehensive solution to the problem of eliminating the consequences of physical and compensating for the moral aging of the CZU, it is proposed to carry out their repair with the simultaneous modernization of those components that, on the one hand, have the lowest operational reliability, and on the other, on which the lag in tactical and technical characteristics compared to the best world models depends to the greatest extent. У статті наведено методичний підхід щодо визначення доцільності проведення ремонту та шляхів подальшої експлуатації і модернізації. Підхід базується на основі s-подібного закону еволюції розвитку технічних систем, для якого характерні етапи: зародження, промислового виробництва, консервації розвитку, зменшення ефективності функціонування та включає оцінку технічних та економічних факторів, які впливають на прийняття рішення щодо проведення модернізації. Модернізація розглядається, як спосіб подолання наслідків морального, фізичного старіння та продовження подальшої ефективної експлуатації. Результати досліджень можуть бути використані для оцінки доцільності проведення модернізації зразків озброєння Збройними Силами України та науковими організаціями Міністерства оборони України.

  • Open Access

    Determining the expediency of modernizing technical systems based on an evolutionary approach

    by Vladyslav Shostak, Viktor Yerko, Yevhen Kryzhanivskyi, Andrii Liubarets, Vladyslav Perehonchuk

    A methodical approach to determining the necessity and expediency of modernization of complex technical systems based on the evolutionary approach is presented, which is based on the results of the analysis of technical and economic factors affecting the decision-making regarding modernization. Modernization is considered as a stage of evolution in the development of complex technical systems, and as a way to overcome the consequences of moral and physical aging and continue effective exploitation. At the same time, the process of evolution is described by some S-shaped law, which is characterized by the following stages - genesis, industrial production, conservation and development, reduction in the efficiency of application and the end of the life cycle.

  • Open Access

    Method of automating the process of object detection to increase the efficiency of deciphering aerial reconnaissance data

    by I. M. Tупиця, І. О. Дейнеженко, Є. С. Крижанівський, М. В. Пархоменко, Ю. П. Волков, Г. Б. Ейдельштейн

    Problem factors that have a significant impact on the effectiveness of the process of deciphering air reconnaissance data obtained under the conditions of the use of unmanned aerial vehicles of the tactical level are analyzed, taking into account the experience of conducting combat operations on the territory of Ukraine. Requirements for operational efficiency and reliability of the process of recognition (detection) of aerial reconnaissance objects are being formed. Modern computer vision algorithms and deep machine learning technologies are studied from the point of view of integration into the process of deciphering aerial reconnaissance data. A method of automating the process of detecting aerial reconnaissance objects is being developed to increase the effectiveness of deciphering aerial photographs. The essence of the developed method is the integration of modern computer vision technologies, implemented on the basis of algorithms of artificial neural networks, in the process of deciphering aerial photographs. Analysis of the effectiveness of the developed method from the point of view of ensuring the required level of reliability shows that the use of the developed method allows obtaining the required values of the probability of recognition of aerial reconnaissance objects on aerial photographs. In turn, the analysis of quantitative evaluations of the efficiency of deciphering aerial reconnaissance data shows that the use of the developed method allows you to significantly reduce the time for deciphering an aerial photograph on average, up to 2 seconds per aerial photograph under the conditions of using rather low computing power. The features of the developed method: practical implementation of the specified automation method does not require high computing power; integration into the decryption process does not require significant personnel training and high technical requirements.


  • Open Access

    Methodical bases of processing the results of research on guided and unguided missiles solid fuel engines

    by Victor Yerko, Yevhen Kryzhanivskyi, Andrii Liubarets, Andrii Shatrov

    In the article is given methodical approach of determining and confirming of main traction force characteristics of different purpose missiles solid fuel engines. The probability of failure-free operation at the define functionality time is proposed as basis reliability rate, which is calculated with taking into account the structural functional scheme of solid fuel engines which are under research. This approach allows to taking into account the construction peculiarities of engines components parts and elements and interconnection between them. In the article also given interconnection between speed of guided missiles at the end of active flying trajectory and traction force impulse of their solid fuel engines which are defining from tests results.


  • METHODOLOGICAL AND TECHNOLOGICAL RESEARCH BASICS OF COMBAT PARTS OF MEANS OF DEFEAT

    by Ye. Kryzhanivskyi, V. Perehonchuk, Д.с. Печура, A. Nikitchenko

    Modern combat weapons are one of the important and specific types of military equipment that largely determine the combat potential of the Armed Forces, and control and forecasting of their technical condition is an important component of ensuring serviceability. By the technical condition, we mean the totality of their properties, that change during operation and are characterized at a certain point in time by the defining parameters (signs) defined by the technical documentation. Given that the quantitative relationship between the chemical resistance of explosives and the terms of operation has not been established to date, it is necessary to conduct appropriate laboratory and experimental studies to assess their technical condition. The article provides the methodical and technological bases of remote sampling of explosive substances of a given shape and mass, which are used to determine: the ignition temperature and the amount of energy released; mass fractions of moisture, volatile substances and components; chemical stabilty, acidity, etc. As an example, the process of sampling from the warhead of a guided missile is shown. The study of combat units is carried out taking into account the features of the design and the action of the damage factors. High-explosive, fragmentation and cumulative targets have been developed for this purpose. Explosiveness, fragmentation (the number of useful fragments per 1 kg of charge) and cumulativeness (penetration depth) are used as the main parameters that determine their technical condition. The article provides examples of tests of various combat units and the results of the effects of factors affecting the target. The implementation of the main provisions of the methodical and technological foundations of the research of combat units made it possible to make informed decisions about the possibility, expediency and features of their further exploitation. У статті наведено методичні та технологічні підходи щодо дослідження працездатності та підтвердження основних характеристик бойових частин засобів ураження різного призначення, запропоновано окремі процедури визначення та підтвердження їх основних тактико-технічних характеристик. Наведено перелік основної апаратури для проведення фізико-хімічних досліджень матеріалів вибухових речовин, методико-технологічні основи та особливості досліджень бойових частин осколкової, фугасної і кумулятивної дії.

  • Open Access

    МЕТОДИЧНИЙ ПІДХІД ЩОДО ВИЗНАЧЕННЯ НЕОБХІДНОСТІ ТА ДОЦІЛЬНОСТІ ПРОВЕДЕННЯ МОДЕРНІЗАЦІЇ ЗАСОБІВ УРАЖЕННЯ

    by Сергій Котляренко, Андрій Любарець, Євген Крижанівський, Роман Дужий

    У статті наведено методичний підхід щодо визначення необхідності та доцільності проведення модернізації засобів ураження. Підхід включає оцінку технічних та  економічних факторів, які впливають на прийняття рішення щодо проведення модернізації. Модернізація розглядається, як спосіб подолання наслідків морального, фізичного старіння та продовження ефективної експлуатації. Результати досліджень можуть бути використані для оцінки доцільності проведення модернізації зразків озброєння Збройними Силами України та науковими організаціями Міністерства оборони України.