JHJoachim Horn

Joachim Horn

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joachim Horn has a total of 12 co-authors. Here are the top co-authors by number of shared publications:

  • Harald Steen

    Section of Children's Orthopaedics and Reconstructive Surgery, Division of Orthopaedics, Oslo University Hospital, Oslo, Norway

    6 shared publications
  • Stefan Huhnstock

    Section of Children's Orthopaedics and Reconstructive Surgery, Division of Orthopaedics, Oslo University Hospital, Oslo, Norway

    5 shared publications
  • Ivan Hvid

    A Section of Children's Orthopaedics and Reconstructive Surgery, Division of Orthopaedic Surgery , Oslo University Hospital

    2 shared publications
  • Anders Grønseth

    Section of Children's Orthopaedics and Reconstructive Surgery, Division of Orthopaedics, Oslo University Hospital, Oslo, Norway

    1 shared publication
  • Anders Wensaas

    Department of Children's Orthopaedics and Reconstructive Surgery, Oslo University Hospital, Rikshospitalet, Sognsvannsveien 20, 0027 Oslo, Norway

    1 shared publication
  • Anita Hoddevik Dagsgard

    Physiotherapy, Oslo University Hospital, Rikshospitalet

    1 shared publication

Latest Publications

  • PATIENT-SPECIFIC 3D-PRINTED GUIDES FOR CENTRAL PHYSEAL BAR RESECTION: ENHANCING PRECISION AND OUTCOMES IN PAEDIATRIC LOWER EXTREMITY SURGERY

    by Joachim Horn, Stefan Huhnstock

    Physeal bar formation in the lower extremities after injury to the growth plate often results in angular deformities and leg length discrepancies, presenting significant challenges for pediatric patients. Traditional physeal bar resection techniques, while effective in some cases, may lack the precision required to ensure complete removal of the bony bridges, and without compromising the surrounding healthy physis. Advances in 3D printing have introduced patient-specific guides as a promising tool to enhance surgical accuracy and clinical outcomes.This study evaluates a novel approach to central physeal bar resection in the lower extremities using patient-specific 3D-printed surgical guides and rigid bone reamers, focusing on precision, safety, and clinical outcomes.Methods: Five pediatric patients (mean age: 11.5 years; range: 10.5–12.5 years) with centrally located physeal bars affecting less than 40% of the physeal area and with at least two years of remaining growth were included. The cohort comprised three boys and two girls, with two cases in the distal femur, two in the distal tibia, and one in the proximal tibia. CT scans were used to delineate the physeal bar, and digital simulations guided the creation of patient-specific 3D-printed surgical guides. These guides enabled precise reaming through a single cortical entry point. Outcomes were assessed using postoperative CT scans, long-standing axis radiographs, and clinical evaluations.Results: Complete removal of physeal bars was confirmed in all cases via postoperative CT scans, with no recurrences during follow-up. In the two distal femur cases, near-normal longitudinal growth was observed, with significant spontaneous correction of angular deviations. In the tibial cases (two distal, one proximal), no further increase of deformities developed.The results highlight the potential of patient-specific 3D-printed guides to enhance the precision of physeal bar resections compared to traditional methods, which show high compolication rates. The ability to pre-plan resection and employ custom-designed guides allows for complete removal of the bar and minimizes damage to surrounding growth cartilage, which is critical for preserving growth potential and correcting angular deformities. These findings align with emerging evidence supporting 3D-printed surgical tools as a transformative approach in orthopedics. However, further studies with larger cohorts and long-term follow-up are necessary to validate these preliminary results.Patient-specific 3D-printed guides represent an innovative and effective solution for managing physeal bars in pediatric patients, providing enhanced surgical precision and improved clinical outcomes.


  • OUTCOMES AND CHALLENGES OF LIMB LENGTHENING USING MOTORIZED INTRAMEDULLARY NAILS: A RETROSPECTIVE ANALYSIS OF 129 CONSECUTIVE LENGTHENINGS

    by Joachim Horn, Stefan Huhnstock, Harald Steen, Anders Grønseth, Anne Berg Breen

    Limb lengthening using a motorized intramedullary nail is a relatively new technique. The aim of this study was to evaluate whether lengthening nails are a reliable and safe method for femoral and tibial lengthening.We analyzed data from a prospective database of all limb lengthening procedures performed at our hospital. The primary outcomes were achieved lengthening, lengthening index (healing rate), and complications.We identified data from 129 lengthening procedures performed with motorized intramedullary nails on 119 patients with a mean age of 20 years (range 9–61); 64 were male and 55 were female. Seven patients underwent bilateral lengthening for short stature. The most common diagnoses were congenital short femur (n=29), post-traumatic shortening (n=18), and idiopathic leg length discrepancy (n=14).The procedures included 116 femoral lengthenings (90 antegrade, 26 retrograde) and 13 tibial lengthenings. The mean operative time was 134 minutes (range 49–300), and 16 cases involved multiple procedures under the same anesthesia. The average lengthening achieved was 39 mm (range 20–80). Complications led to 13 unplanned secondary surgeries (10%), including five cases of early removal of a blocking screw. Additionally, three cases of nonunion required secondary surgical intervention. Retrograde femoral and tibial lengthening were associated with higher complication rates compared to antegrade femoral lengthening.The results demonstrate that motorized intramedullary nails are effective for limb lengthening, achieving consistent results in terms of lengthening and healing. However, the higher complication rates observed with retrograde femoral lengthening and tibial lengthening highlight the need for careful patient selection and surgical planning. Retrograde approaches, especially when combined with angular correction, may introduce additional technical challenges and mechanical stress, increasing the risk of complications. For femoral angular deformities, a staged approach with initial angular correction followed by antegrade lengthening may reduce complications. In tibial lengthening, external fixation (e.g., Ilizarov or TSF) remains a viable alternative in selected cases, offering better control over alignment and healing in complex deformities. Further studies are needed to refine surgical techniques and identify patient-specific factors influencing outcomes.Limb lengthening using motorized intramedullary nails is a reliable and safe method, but complications are more frequent in retrograde femoral and tibial procedures. Optimized surgical strategies are essential to improve outcomes and reduce risks in these cases.

  • Open Access

    Limb lengthening and deformity correction with externally controlled motorized intramedullary nails: evaluation of 50 consecutive lengthenings

    by Joachim Horn, Ivan Hvid, Stefan Huhnstock, Anne B Breen, Harald Steen

    Background and purpose — Limb lengthening with an intramedullary motorized nail is a relatively new method. We investigated if lengthening nails are reliable constructs for limb lengthening and deformity correction in the femur and the tibia. Patients and methods — 50 lengthenings (34 Precice and 16 Fitbone devices) in 47 patients (mean age 23 years [11–61]) with ≥12 months follow-up are included in this study. 30 lengthenings were done due to congenital and 20 because of posttraumatic deformity (21 antegrade femora, 23 retrograde femora, 6 tibiae). Initial deformities included a mean shortening of 42 mm (25–90). In 15 patients, simultaneous axial correction was done using the retrograde nailing technique. Results — The planned amount of lengthening was achieved in all but 2 patients. 5 patients who underwent simultaneous axial correction showed minor residual deformity; unintentionally induced minor deformities were found in the frontal and sagittal plane. The consolidation index was 1.2 months/cm (0.6–2.5) in the femur and 2.5 months/cm (1.6–4.0) in the tibia. 2 femoral fractures occurred in retrograde femoral lengthenings after consolidation due to substantial trauma. There were 8 complications, all of which were correctable by surgery, with no permanent sequelae. Interpretation — Controlled acute axial correction of angular deformities and limb lengthening can be achieved by a motorized intramedullary nail. A thorough preoperative planning and intraoperative control of alignment are required to avoid residual and unintentionally induced deformity. In the femur relatively fast consolidation could be observed, whereas healing was slower in the tibia.


  • Open Access

    Limb lengthening and deformity correction of congenital and acquired deformities in children using the Taylor Spatial Frame

    by Joachim Horn, Harald Steen, Stefan Huhnstock, Ivan Hvid, Ragnhild B Gunderson

    Background and purpose — Hexapod ring fixators such as the Taylor Spatial Frame (TSF) have shown good outcomes. However, there have only been a few studies comparing the use of TSF with various etiologies of the deformity. We compared the use of TSF in congenital and acquired deformities in children. Patients and methods — We reviewed 213 lower extremity reconstructive procedures with the TSF in 192 patients who were operated between October 2000 and October 2015. 128 procedures (67 proximal tibiae, 51 distal femora, and 10 distal tibiae) in 117 children (median age 14 (4–18) years; 59 girls) fulfilled the inclusion criteria. 89 procedures were done in children with congenital deformities (group C) and 39 were done in children with acquired deformities (group A). Outcome parameters were lengthening and alignment achieved, lengthening index, complications, and analysis of residual deformity in a subgroup of patients. Results — Mean lengthening achieved was 3.9 (1.0–7.0) cm in group C and 3.7 (1.0–8.0) cm in group A (p = 0.5). Deformity parameters were corrected to satisfaction in all but 3 patients, who needed further surgery for complete deformity correction. However, minor residual deformity was common in one-third of the patients. The mean lengthening index was 2.2 (0.8–10) months/cm in group C and 2.0 (0.8–6) months/cm in group A (p = 0.7). Isolated analysis of all tibial and femoral lengthenings showed similar lengthening indices between groups. Complication rates and the need for secondary surgery were much greater in the group with congenital deformities. Interpretation — The TSF is an excellent tool for the correction of complex deformities in children. There were similar lengthening indices in the 2 groups. However, congenital deformities showed a high rate of complications, and should therefore be addressed with care.


  • Open Access

    Femoral lengthening with a motorized intramedullary nail

    by Joachim Horn, Øyvind Grimsrud, Anita Hoddevik Dagsgard, Stefan Huhnstock, Harald Steen

    Purpose — We assessed whether an intramedullary lengthening device would reduce the problems normally associated with the external fixation technique. We also wanted to determine whether it is a reliable construct for limb lengthening and deformity correction in the femur. Patients and methods — We conducted a matched-pair comparison of 30 femoral lengthenings, 15 with a motorized intramedullary nail (the nail group) and 15 lengthenings with an external ring fixator (the fixator group). The patients were matched based on age, sex, amount of lengthening, and the etiology of leg length discrepancy. Mean lengthening was 35 (25–55) mm in the nail group and 38 (15–75) mm in the fixator group. Outcome measures were: lengthening and alignment achieved, consolidation index, knee range of motion (ROM), and complications. Results — The pairs in this matched-pair study were similar in terms of age, sex, diagnosis, and amount of lengthening. The planned amount of lengthening was achieved in all patients in both groups and axis correction was considered sufficient. The mean radiographic consolidation index in the nail group, at 1.5 (0.9–3.0) months/cm, was better than the mean value for the fixator group (1.9 (0.9–3.4) months/cm) (p = 0.01). Knee ROM was better in the nail group during the lengthening, 6 weeks after lengthening was completed, and 6 months after lengthening was completed (p < 0.001). A larger number of complications were observed in the fixator group than in the nail group. Interpretation — A lengthening nail may be superior to external fixation in femoral lengthening, when the anatomical conditions and the complexity of the deformity allow the use of an intramedullary nail.


  • Open Access

    Percutaneous epiphysiodesis in the proximal tibia by a single-portal approach: Evaluation by radiostereometric analysis

    by Joachim Horn, Ragnhild Beate Gunderson, Anders Wensaas, Harald Steen

    Purpose: We modified the method for tibial epiphysiodesis by solely using a lateral approach to the physis. From this small-incision approach, the lateral as well as the medial part of the tibial physis were ablated. The aim of our study was to see if this operative technique might be as effective as a bilateral approach, and reduce the operation time and usage time of the image intensifier. The epiphysiodeses were monitored by radiostereometric analysis (RSA), which is a well-established method for the analysis of micro movements and has been used to monitor percutaneous epiphysiodesis with the bilateral approach. There are no reports in the literature comparing single- with double-portal approaches for percutaneous epiphysiodesis evaluated by RSA. Methods: Twenty children were treated by percutaneous epiphysiodesis for leg length discrepancies ranging from 15 to 70 mm, comprising 14 boys and 6 girls with a mean age of 13 (11–15) years. The timing of epiphysiodesis was determined by using Moseley's straight-line graph and Paley's multiplier method. For the tibial epiphysiodesis, ten patients were operated with a single surgical approach from the lateral side (Group I) and ten patients were operated with a surgical approach from both the medial and the lateral sides (Group II). The percutaneous epiphysiodesis was monitored by RSA, a method which allows analysis of the three-dimensional dynamics of the epiphysis relative to the metaphysics. RSA examinations were performed postoperatively and after 6 weeks, 12 weeks, and 6 months. Results: From 0 to 6 weeks after epiphysiodesis, the mean longitudinal growth across the operated physis in the tibia in Group I was 0.26 (0.01–0.6) mm. In Group II, the mean growth for the first 6 weeks after surgery was 0.17 (0.01–0.5) mm. During the time period from 6 weeks to 12 weeks after surgery, there was a mean growth of 0.06 (0.00–0.18) mm in Group I and 0.03 (0.00–0.2) mm in Group II. The mean growth from 0 to 6 weeks after epiphysiodesis for all patients was 0.22 mm, which corresponds to 30 % of the normal growth rate. From 6 to 12 weeks, the mean growth for all patients was 0.046 mm, i.e., 6 % of the normal growth rate. From 12 weeks to 24 weeks, no significant growth across the operated physis was observed in neither Group I nor Group II. The mean surgical time was 26 (21–30) min in Group I and 43 (35–48) min in Group II. This difference was statistically significant ( p = 0.006). The mean time for use of the image intensifier during surgery was 202 (191–236) s in Group I and 229 (185–289) s in Group II ( p = 0.013). Conclusions: In our study, a single-portal technique from the lateral side for percutaneous epiphysiodesis of the proximal tibia was as effective as the double-portal technique. Actual growth arrest appeared within 12 weeks after surgery. A single-portal technique for epiphysiodesis of the tibia is a safe technique, with less surgical time and less time for image intensification compared to the double-portal technique.


  • Open Access

    Epidemiology and treatment outcome of congenital pseudarthrosis of the tibia

    by Joachim Horn, Harald Steen, Terje Terjesen

    Purpose: Congenital pseudarthrosis of the tibia (CPT) is a rare disease. Epidemiological data are limited, and treatment of the condition is challenging. The purpose of our study was to gain epidemiological data on the incidence of CPT in Norway and to evaluate the treatment outcome of the disease. Methods: During the period 1987–2006 22 patients with CPT were born in Norway (11 boys, 11 girls; mean age 15 years, age range 8–24 years) and are included in this study. During the same time period 1,183,380 live-births were registered by the Norwegian Birth Register. Primary surgical treatment was the Ilizarov method in 15 patients, intramedullary nailing in three patients, and plate osteosynthesis in two patients; two patients never developed a fracture and were treated with an orthosis. Results: The incidence of CPT based on this period was 1:53,000. The rate of primary healing was 66 % for the Ilizarov group. Primary healing occurred in three patients treated with intramedullary nailing and in none of the patients treated with plate osteosynthesis. However, almost all patients required additional surgery due to refracture or deformity correction. Currently, all 12 skeletally mature patients are considered to be healed, whereas two of the skeletally immature patients are still under treatment. Conclusion: The incidence of CPT in Norway seems to be notably higher than that based on epidemiological data from other studies. Primary healing rates are satisfactory when treated either with an Ilizarov device or intramedullary nailing. Refractures must be avoided, and alignment of the leg must be maintained. Healing is usually achieved before skeletal maturity. However, residual deformities are common.