Charles Bruce Worden
Research Subjects
Charles Bruce Worden has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Eric Meyer Thompson
U.S. Geological Survey, Geologic Hazards Science Center, Golden, Colorado, U.S.A.
6 shared publications - David Jay Wald
U.S. Geological Survey, Golden, Colorado, U.S.A.
4 shared publications - Harriet Zoe Yin
U.S. Geological Survey, Geologic Hazards Science Center, Golden, Colorado, U.S.A.
3 shared publications - Kishor S. Jaiswal
U.S. Geological Survey Golden Colorado USA
3 shared publications - Mike Hearne
U.S. Geological Survey, Geologic Hazards Science Center, Golden, Colorado, U.S.A.
2 shared publications - Adam T. Ringler
U.S. Geological Survey, Albuquerque Seismological Laboratory, Albuquerque, USA
1 shared publication
Latest Publications
- Open Access
- 28 October 2026
- Published by Seismological Society of America (SSA) in Seismological Research Letters
Using Tectonic Context to Help Constrain Rapid Earthquake Shaking Estimates
Accurate, readily available shaking estimates can improve situational awareness and rapid response efforts following a major earthquake. The spatial distribution of shaking relative to population and infrastructure has major implications for expected fatalities, damage, and disruptions. For large earthquakes, the location, size, and orientation of the causal fault plane (i.e., fault finiteness) play primary roles in determining the distribution of shaking. However, such a description of the causal fault is difficult to establish in the immediate aftermath of a major event, when observations are typically sparse and uncertain. However, during the time window between an event’s detection and the completion of quantitative constraints on the source, tectonic context can provide evidence for the rupture’s likely spatial orientation, thereby improving shaking estimates prior to formal finite-fault inversion results. Here, we propose a new method using tectonic context to describe a constrained, but still uncertain, source to improve early shaking estimates for large earthquakes. We demonstrate its implementation in the U.S. Geological Survey ShakeMap software by applying the proposed method to a catalog of 40 large (Mw>7), impactful global events from 2018 to 2026 and present an analysis of the results. We find that for 18 of the catalog events, the ShakeMap could be automatically constrained based on the seismotectonic context, whereas 14 events would require expert user input to determine whether a constrained approach is appropriate, and 8 events would not benefit from a constrained approach (but could be automatically identified). The results show that using seismotectonic context to constrain the source can substantially improve shaking estimates in the immediate minutes to hours following a major earthquake. We show a detailed comparison of the proposed (constrained) approach to the existing (unconstrained) approach for four earthquakes, each occurring in a distinct tectonic environment, to highlight the advantages and limitations of the method’s application.
- 28 October 2026
- Published by Seismological Society of America (SSA) in Seismological Research Letters
Open AccessUsing Tectonic Context to Help Constrain Rapid Earthquake Shaking Estimates
Accurate, readily available shaking estimates can improve situational awareness and rapid response efforts following a major earthquake. The spatial distribution of shaking relative to population and infrastructure has major implications for expected fatalities, damage, and disruptions. For large earthquakes, the location, size, and orientation of the causal fault plane (i.e., fault finiteness) play primary roles in determining the distribution of shaking. However, such a description of the causal fault is difficult to establish in the immediate aftermath of a major event, when observations are typically sparse and uncertain. However, during the time window between an event’s detection and the completion of quantitative constraints on the source, tectonic context can provide evidence for the rupture’s likely spatial orientation, thereby improving shaking estimates prior to formal finite-fault inversion results. Here, we propose a new method using tectonic context to describe a constrained, but still uncertain, source to improve early shaking estimates for large earthquakes. We demonstrate its implementation in the U.S. Geological Survey ShakeMap software by applying the proposed method to a catalog of 40 large (Mw>7), impactful global events from 2018 to 2026 and present an analysis of the results. We find that for 18 of the catalog events, the ShakeMap could be automatically constrained based on the seismotectonic context, whereas 14 events would require expert user input to determine whether a constrained approach is appropriate, and 8 events would not benefit from a constrained approach (but could be automatically identified). The results show that using seismotectonic context to constrain the source can substantially improve shaking estimates in the immediate minutes to hours following a major earthquake. We show a detailed comparison of the proposed (constrained) approach to the existing (unconstrained) approach for four earthquakes, each occurring in a distinct tectonic environment, to highlight the advantages and limitations of the method’s application.
- Open Access
- 23 February 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (3) , 1049-1063
Ground Motions from Finite Faults with Unknown Geometry
Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.
- 23 February 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (3) , 1049-1063
Open AccessGround Motions from Finite Faults with Unknown Geometry
Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.
- Top Cited PapersOpen Access
- 1 January 2026
- Published by Seismological Society of America (SSA) in The Seismic Record
- Vol. 6 (1) , 1-12
Rapid Characterization of the 2025 Mw 8.8 Kamchatka, Russia Earthquake
The 29 July 2025 Mw 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near-source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real-time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite-fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The Mw 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.
- 1 January 2026
- Published by Seismological Society of America (SSA) in The Seismic Record
- Vol. 6 (1) , 1-12
Top Cited PapersOpen AccessRapid Characterization of the 2025 Mw 8.8 Kamchatka, Russia Earthquake
The 29 July 2025 Mw 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near-source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real-time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite-fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The Mw 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.
- 16 August 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (1) , 538-553
Automated, Near Real-Time Ground-Motion Processing at the U.S. Geological Survey
We describe automated ground-motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near-real-time earthquake hazard products. Because of the open-source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open-source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use-cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.
- 16 August 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (1) , 538-553
Automated, Near Real-Time Ground-Motion Processing at the U.S. Geological Survey
We describe automated ground-motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near-real-time earthquake hazard products. Because of the open-source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open-source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use-cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.
- 17 November 2023
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 95 (2A) , 879-899
ShakeMap Atlas 4.0 and AtlasCat: An Archive of the Recent and the Historical Earthquake ShakeMaps, and Impacts for Global Hazard Analyses and Loss Model Calibration
Archival earthquake studies often focus on event and source characteristics for use in earthquake catalogs, seismotectonic understanding, and ground-motion studies—many of these targeting better constraints for probabilistic seismic-hazard analyses. The ShakeMap Atlas, in contrast, focuses on spatial distribution of shaking for the historical events, providing the best constraints at all locations that experienced significant shaking for each event, facilitating analyses of human experience, damage, and induced hazards (ground failure). The aim of the Atlas is to gain a general understanding and depiction of the shaking distribution for a suite of canonical earthquakes, and, coupled with loss data for each event, to provide a basis for earthquake loss model calibration, among other uses. Although the initial motivation for developing the ShakeMap Atlas was calibrating the U.S. Geological Survey (USGS) Prompt Assessment of Global Earthquakes for Response system, over time, the Atlas has proved to be a useful tool for its users, and, as such, its scope has been vastly expanded in this newest version. The fourth version of the USGS ShakeMap Atlas is an openly available compilation of over 14,000 ShakeMaps of significant global earthquakes between 1900 and 2020. This revision includes: (1) the latest version of the ShakeMap software that provides refined uncertainty estimations and improved methods to combine macroseismic observations with updated ground-motion models; (2) an updated earthquake source catalog; (3) a refined strategy to select suites of prediction and conversion equations based on a new seismotectonic regionalization scheme; and (4) expanded macroseismic intensity and ground-motion datasets. We also tabulate reported economic losses and fatalities for Atlas events where such data are openly available. These changes make the new ShakeMap Atlas a self-consistent, calibrated catalog invaluable for investigating near-source ground motions, as well as seismic hazard, scenario, risk, and loss-model development and testing.
- 17 November 2023
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 95 (2A) , 879-899
ShakeMap Atlas 4.0 and AtlasCat: An Archive of the Recent and the Historical Earthquake ShakeMaps, and Impacts for Global Hazard Analyses and Loss Model Calibration
Archival earthquake studies often focus on event and source characteristics for use in earthquake catalogs, seismotectonic understanding, and ground-motion studies—many of these targeting better constraints for probabilistic seismic-hazard analyses. The ShakeMap Atlas, in contrast, focuses on spatial distribution of shaking for the historical events, providing the best constraints at all locations that experienced significant shaking for each event, facilitating analyses of human experience, damage, and induced hazards (ground failure). The aim of the Atlas is to gain a general understanding and depiction of the shaking distribution for a suite of canonical earthquakes, and, coupled with loss data for each event, to provide a basis for earthquake loss model calibration, among other uses. Although the initial motivation for developing the ShakeMap Atlas was calibrating the U.S. Geological Survey (USGS) Prompt Assessment of Global Earthquakes for Response system, over time, the Atlas has proved to be a useful tool for its users, and, as such, its scope has been vastly expanded in this newest version. The fourth version of the USGS ShakeMap Atlas is an openly available compilation of over 14,000 ShakeMaps of significant global earthquakes between 1900 and 2020. This revision includes: (1) the latest version of the ShakeMap software that provides refined uncertainty estimations and improved methods to combine macroseismic observations with updated ground-motion models; (2) an updated earthquake source catalog; (3) a refined strategy to select suites of prediction and conversion equations based on a new seismotectonic regionalization scheme; and (4) expanded macroseismic intensity and ground-motion datasets. We also tabulate reported economic losses and fatalities for Atlas events where such data are openly available. These changes make the new ShakeMap Atlas a self-consistent, calibrated catalog invaluable for investigating near-source ground motions, as well as seismic hazard, scenario, risk, and loss-model development and testing.
- 11 January 2022
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 112 (2) , 1060-1079
Partitioning Ground Motion Uncertainty When Conditioned on Station Data
Rapid estimation of earthquake ground shaking and proper accounting of associated uncertainties in such estimates when conditioned on strong-motion station data or macroseismic intensity observations are crucial for downstream applications such as ground failure and loss estimation. The U.S. Geological Survey ShakeMap system is called upon to fulfill this objective in light of increased near-real-time access to strong-motion records from around the world. Although the station data provide a direct constraint on shaking estimates at specific locations, these data also heavily influence the uncertainty quantification at other locations. This investigation demonstrates methods to partition the within- (phi) and between-event (tau) uncertainty estimates under the observational constraints, especially when between-event uncertainties are heteroscedastic. The procedure allows the end users of ShakeMap to create separate between- and within-event realizations of ground-motion fields for downstream loss modeling applications in a manner that preserves the structure of the underlying random spatial processes.
- 11 January 2022
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 112 (2) , 1060-1079
Partitioning Ground Motion Uncertainty When Conditioned on Station Data
Rapid estimation of earthquake ground shaking and proper accounting of associated uncertainties in such estimates when conditioned on strong-motion station data or macroseismic intensity observations are crucial for downstream applications such as ground failure and loss estimation. The U.S. Geological Survey ShakeMap system is called upon to fulfill this objective in light of increased near-real-time access to strong-motion records from around the world. Although the station data provide a direct constraint on shaking estimates at specific locations, these data also heavily influence the uncertainty quantification at other locations. This investigation demonstrates methods to partition the within- (phi) and between-event (tau) uncertainty estimates under the observational constraints, especially when between-event uncertainties are heteroscedastic. The procedure allows the end users of ShakeMap to create separate between- and within-event realizations of ground-motion fields for downstream loss modeling applications in a manner that preserves the structure of the underlying random spatial processes.