Shubo Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shubo Tian has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Kai Sun
State Key laboratory of Chemical Resource Engineering, College of Chemistry, Beijing University of Chemical Technology, Beijing, P. R. China
5 shared publications- Xiaoming Sun
State Key Laboratory of Chemical Resource Engineering College of Chemistry Beijing University of Chemical Technology Beijing People's Republic of China
5 shared publications - Ziyun Wang
University of Auckland
4 shared publications Jialun Tang
State Power Investment Corporation hydrogen energy Co., Ltd. Beijing 100029 China
3 shared publicationsShuhui Xu
State Key Laboratory of Chemical Resource Engineering College of Chemistry Beijing University of Chemical Technology Beijing 100029 China
3 shared publicationsXiuting Fu
3 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (12)
Tandem synthesis strategy for atomically precise Pt 1 /Pt 2 /Pt 3 catalysts: Enhanced nitrobenzene selective hydrogenation via atomic number regulation
Atomically precise heterogeneous catalysts offer unprecedented opportunities for establishing clear structure-activity relationships in catalysis. However, the precise control over the number of metal atoms in such systems remains a significant challenge, primarily due to difficulties in maintaining atomic-level dispersion, preventing metal migration and aggregation. This study develops a tandem synthesis strategy combining ligand protection and precursor engineering. First, atomically precise precursors Pt1(C44H32P2)2(CO)4, Pt2(C18H12Cl3P)3Br2(CO)1, and Pt3(C18H21P)5(CO)2 are synthesized using mixed ligands. Subsequently, by integrating Joule induction rapid thermal annealing technology, structurally well-defined Pt1/OKB, Pt2/OKB, and Pt3/OKB catalysts are successfully constructed on oxidized Ketjenblack (OKB) support. Under mild conditions (60 °C, 0.5 MPa H2) for nitrobenzene selective hydrogenation, the Pt3/OKB catalyst achieves > 99% conversion and > 99% aniline selectivity, significantly outperforming Pt single-atom, Pt dual-atom, and Pt nanoparticle catalysts. Density functional theory (DFT) calculations demonstrate that the unique coordination environment in the triatomic structure optimizes adsorption strength, suppressing excessive benzene ring hydrogenation while facilitating H2 activation and intermediate stabilization, thereby achieving synergistic regulation of activity and selectivity at the atomic scale. This study provides an atomically precise synthetic method for heterogeneous catalysts and elucidates the dependence of catalytic hydrogenation performance on the number of metal atoms.
- 29 September 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (12)
Open AccessTandem synthesis strategy for atomically precise Pt 1 /Pt 2 /Pt 3 catalysts: Enhanced nitrobenzene selective hydrogenation via atomic number regulation
Atomically precise heterogeneous catalysts offer unprecedented opportunities for establishing clear structure-activity relationships in catalysis. However, the precise control over the number of metal atoms in such systems remains a significant challenge, primarily due to difficulties in maintaining atomic-level dispersion, preventing metal migration and aggregation. This study develops a tandem synthesis strategy combining ligand protection and precursor engineering. First, atomically precise precursors Pt1(C44H32P2)2(CO)4, Pt2(C18H12Cl3P)3Br2(CO)1, and Pt3(C18H21P)5(CO)2 are synthesized using mixed ligands. Subsequently, by integrating Joule induction rapid thermal annealing technology, structurally well-defined Pt1/OKB, Pt2/OKB, and Pt3/OKB catalysts are successfully constructed on oxidized Ketjenblack (OKB) support. Under mild conditions (60 °C, 0.5 MPa H2) for nitrobenzene selective hydrogenation, the Pt3/OKB catalyst achieves > 99% conversion and > 99% aniline selectivity, significantly outperforming Pt single-atom, Pt dual-atom, and Pt nanoparticle catalysts. Density functional theory (DFT) calculations demonstrate that the unique coordination environment in the triatomic structure optimizes adsorption strength, suppressing excessive benzene ring hydrogenation while facilitating H2 activation and intermediate stabilization, thereby achieving synergistic regulation of activity and selectivity at the atomic scale. This study provides an atomically precise synthetic method for heterogeneous catalysts and elucidates the dependence of catalytic hydrogenation performance on the number of metal atoms.
- 25 March 2026
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 42 (3) , 757-767
Coordination Structure of Single-atom M-NC
- 25 March 2026
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 42 (3) , 757-767
Coordination Structure of Single-atom M-NC
- Open Access
- 6 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Synergistic aluminum dual-atom sites and nickel nanoclusters for acetylene selective hydrogenation
Synergistic catalysis, where distinct active species collaboratively activate different substrates, provides a powerful strategy for achieving chemical transformations with enhanced efficiency. Although Al 2 O 3 and bulk aluminum species are widely employed as catalyst supports, they are seldom regarded as active centers, especially in hydrogenation. Here, we show that atomically dispersed Al species can catalyze acetylene conversion at elevated temperatures. Building on this insight, we have designed a synergistic catalyst featuring precisely controlled Al dual-atom sites paired with Ni nanoclusters, synthesized via a solid-transformation-coupled gas-adsorption strategy to overcome the typical activity-selectivity trade-off. Under mild, cost-effective conditions, this catalyst achieves nearly full acetylene conversion with ~90% ethylene selectivity and excellent long-term stability. In situ spectroscopy and theoretical calculations reveal a cooperative mechanism: Ni nanoclusters efficiently dissociate H 2 into active hydrogen species (H*), while adjacent Al dual-atom sites shuttle the H* species to π-adsorbed acetylene, lowering the energy barrier for ethylene formation compared to over-hydrogenation and coke formation.
- 6 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSynergistic aluminum dual-atom sites and nickel nanoclusters for acetylene selective hydrogenation
Synergistic catalysis, where distinct active species collaboratively activate different substrates, provides a powerful strategy for achieving chemical transformations with enhanced efficiency. Although Al 2 O 3 and bulk aluminum species are widely employed as catalyst supports, they are seldom regarded as active centers, especially in hydrogenation. Here, we show that atomically dispersed Al species can catalyze acetylene conversion at elevated temperatures. Building on this insight, we have designed a synergistic catalyst featuring precisely controlled Al dual-atom sites paired with Ni nanoclusters, synthesized via a solid-transformation-coupled gas-adsorption strategy to overcome the typical activity-selectivity trade-off. Under mild, cost-effective conditions, this catalyst achieves nearly full acetylene conversion with ~90% ethylene selectivity and excellent long-term stability. In situ spectroscopy and theoretical calculations reveal a cooperative mechanism: Ni nanoclusters efficiently dissociate H 2 into active hydrogen species (H*), while adjacent Al dual-atom sites shuttle the H* species to π-adsorbed acetylene, lowering the energy barrier for ethylene formation compared to over-hydrogenation and coke formation.
- 25 May 2023
- Published by Tsinghua University Press in Nano Research
- Vol. 16 (7) , 9073-9080
Micropore-confined Ru nanoclusters catalyst for efficient pH-universal hydrogen evolution reaction
Pt-based catalysts are used commercially for the hydrogen evolution reaction (HER), even though the low earth abundance and high cost of platinum hinder scale-up applications. Ru metal is a promising alternative catalyst for HER owing to its lower cost but similar metal-hydrogen bond strength to Pt. However, designing an efficient and robust Ru-based electrocatalyst for pH-universal HER is challenging. Herein, we successfully synthesized N-doped carbon (NC) supported ruthenium catalysts with different Ru sizes (single-atoms, nanoclusters and nanoparticles), and then systematically evaluated their performance for HER. Among these catalysts, the Ru nanocluster catalyst (Ru NCs/NC) displayed optimal catalytic performance with overpotentials of only 14, 30, and 32 mV (at 10 mA·cm−2) in 1 M KOH, 1 M phosphate buffer saline (PBS), and 0.5 M H2SO4, respectively. The corresponding mass activities were 32.2, 12.1 and 8.1 times higher than those of 20 wt.% Pt/C, and also much better than those of the Ru single-atoms (Ru SAs/NC) and Ru nanoparticle (Ru NPs/NC) catalysts, at an overpotential of 100 mV under alkaline, neutral and acidic conditions, respectively. Density functional theory (DFT) calculations revealed that the outstanding HER performance of the Ru NCs/NC catalyst resulted from a strong interaction between the Ru nanoclusters and the N-doped carbon support, which downshifted the d-band center and thus weakened the ⋆H adsorption ability of Ru sites.
- 25 May 2023
- Published by Tsinghua University Press in Nano Research
- Vol. 16 (7) , 9073-9080
Micropore-confined Ru nanoclusters catalyst for efficient pH-universal hydrogen evolution reaction
Pt-based catalysts are used commercially for the hydrogen evolution reaction (HER), even though the low earth abundance and high cost of platinum hinder scale-up applications. Ru metal is a promising alternative catalyst for HER owing to its lower cost but similar metal-hydrogen bond strength to Pt. However, designing an efficient and robust Ru-based electrocatalyst for pH-universal HER is challenging. Herein, we successfully synthesized N-doped carbon (NC) supported ruthenium catalysts with different Ru sizes (single-atoms, nanoclusters and nanoparticles), and then systematically evaluated their performance for HER. Among these catalysts, the Ru nanocluster catalyst (Ru NCs/NC) displayed optimal catalytic performance with overpotentials of only 14, 30, and 32 mV (at 10 mA·cm−2) in 1 M KOH, 1 M phosphate buffer saline (PBS), and 0.5 M H2SO4, respectively. The corresponding mass activities were 32.2, 12.1 and 8.1 times higher than those of 20 wt.% Pt/C, and also much better than those of the Ru single-atoms (Ru SAs/NC) and Ru nanoparticle (Ru NPs/NC) catalysts, at an overpotential of 100 mV under alkaline, neutral and acidic conditions, respectively. Density functional theory (DFT) calculations revealed that the outstanding HER performance of the Ru NCs/NC catalyst resulted from a strong interaction between the Ru nanoclusters and the N-doped carbon support, which downshifted the d-band center and thus weakened the ⋆H adsorption ability of Ru sites.
- Open Access
- 28 July 2022
- Published by Wiley in Advanced Science
- Vol. 9 (27) , e2201421
Synergistic Effects in N,O‐Comodified Carbon Nanotubes Boost Highly Selective Electrochemical Oxygen Reduction to H2O2
Electrochemical 2‐electron oxygen reduction reaction (ORR) is a promising route for renewable and on‐site H2O2 production. Oxygen‐rich carbon nanotubes have been demonstrated their high selectivity (≈80%), yet tailoring the composition and structure of carbon nanotubes to further enhance the selectivity and widen working voltage range remains a challenge. Herein, combining formamide condensation coating and mild temperature calcination, a nitrogen and oxygen comodified carbon nanotubes (N,O‐CNTs) electrocatalyst is synthesized, which shows excellent selective (>95%) H2O2 selectivity in a wide voltage range (from 0 to 0.65 V versus reversible hydrogen electrode). It is significantly superior to the corresponding selectivity values of CNTs (≈50% in 0–0.65 V vs RHE) and O‐CNTs (≈80% in 0.3–0.65 V vs RHE). Density functional theory calculations revealed that the C neighbouring to N is the active site. Introducing O‐related species can strengthen the adsorption of intermediates *OOH, while N‐doping can weaken the adsorption of in situ generated *O and optimize the *OOH adsorption energy, thus improving the 2‐electron pathway. With optimized N,O‐CNTs catalysts, a Janus electrode is designed by adjusting the asymmetric wettability to achieve H2O2 productivity of 264.8 mol kgcat–1 h–1.
- 28 July 2022
- Published by Wiley in Advanced Science
- Vol. 9 (27) , e2201421
Open AccessSynergistic Effects in N,O‐Comodified Carbon Nanotubes Boost Highly Selective Electrochemical Oxygen Reduction to H2O2
Electrochemical 2‐electron oxygen reduction reaction (ORR) is a promising route for renewable and on‐site H2O2 production. Oxygen‐rich carbon nanotubes have been demonstrated their high selectivity (≈80%), yet tailoring the composition and structure of carbon nanotubes to further enhance the selectivity and widen working voltage range remains a challenge. Herein, combining formamide condensation coating and mild temperature calcination, a nitrogen and oxygen comodified carbon nanotubes (N,O‐CNTs) electrocatalyst is synthesized, which shows excellent selective (>95%) H2O2 selectivity in a wide voltage range (from 0 to 0.65 V versus reversible hydrogen electrode). It is significantly superior to the corresponding selectivity values of CNTs (≈50% in 0–0.65 V vs RHE) and O‐CNTs (≈80% in 0.3–0.65 V vs RHE). Density functional theory calculations revealed that the C neighbouring to N is the active site. Introducing O‐related species can strengthen the adsorption of intermediates *OOH, while N‐doping can weaken the adsorption of in situ generated *O and optimize the *OOH adsorption energy, thus improving the 2‐electron pathway. With optimized N,O‐CNTs catalysts, a Janus electrode is designed by adjusting the asymmetric wettability to achieve H2O2 productivity of 264.8 mol kgcat–1 h–1.
- 9 June 2022
- Published by Springer Nature in Science China Materials
- Vol. 65 (12) , 3490-3496
Recycling synthesis of single-atom Zn-nitrogen-carbon catalyst for electrocatalytic reduction of O2 to H2O2
- 9 June 2022
- Published by Springer Nature in Science China Materials
- Vol. 65 (12) , 3490-3496
Recycling synthesis of single-atom Zn-nitrogen-carbon catalyst for electrocatalytic reduction of O2 to H2O2
- 12 January 2022
- Published by Wiley in Energy Technology
- Vol. 10 (3)
Solvent Recyclable Synthesis of Nitrogen‐Rich Nanotubes with Embedded CoFe Nanoparticles for Electrochemical Oxygen‐Involving Reactions
Polymerization followed by pyrolysis is an excellent method for synthesizing metal–nitrogen–carbon electrocatalysts, which have shown great potential in various application scenarios including water splitting, fuel cells, and metal–air batteries. However, the polymerization process usually uses a large amount of solvent that cannot be recycled, resulting in solvent waste, cost increase, and environmental pollution, which hinders its wide applications in industry. Inspired by the high polarity and polymerization of formamide (FA), CoFe nanoparticles on nitrogen–carbon nanotubes are synthesized by a FA‐sourced recycle strategy, in which the filtrate after one batch of synthesis will be used as solvent, carbon and nitrogen source for the next batch of synthesis, until the filtrate is consumed totally, verifying this procedure is a cost‐effective method and without any waste discharge. Besides, the catalysts prepared by each batch of recycle procedure exhibit outstanding and consistent oxygen reduction/evolution catalytic performance and satisfying cycle stability when used as an air electrode in a rechargeable zinc‐air battery. This work puts up a simple and clean method for the preparation of metal–nitrogen–carbon electrocatalysts for industrialized use.
- 12 January 2022
- Published by Wiley in Energy Technology
- Vol. 10 (3)
Solvent Recyclable Synthesis of Nitrogen‐Rich Nanotubes with Embedded CoFe Nanoparticles for Electrochemical Oxygen‐Involving Reactions
Polymerization followed by pyrolysis is an excellent method for synthesizing metal–nitrogen–carbon electrocatalysts, which have shown great potential in various application scenarios including water splitting, fuel cells, and metal–air batteries. However, the polymerization process usually uses a large amount of solvent that cannot be recycled, resulting in solvent waste, cost increase, and environmental pollution, which hinders its wide applications in industry. Inspired by the high polarity and polymerization of formamide (FA), CoFe nanoparticles on nitrogen–carbon nanotubes are synthesized by a FA‐sourced recycle strategy, in which the filtrate after one batch of synthesis will be used as solvent, carbon and nitrogen source for the next batch of synthesis, until the filtrate is consumed totally, verifying this procedure is a cost‐effective method and without any waste discharge. Besides, the catalysts prepared by each batch of recycle procedure exhibit outstanding and consistent oxygen reduction/evolution catalytic performance and satisfying cycle stability when used as an air electrode in a rechargeable zinc‐air battery. This work puts up a simple and clean method for the preparation of metal–nitrogen–carbon electrocatalysts for industrialized use.
- Open Access
- 31 August 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 3 (22) , 6330-6341
Controllable synthesis and electrocatalytic applications of atomically precise gold nanoclusters
Nanoclusters are composed of metal atoms and ligands with sizes up to 2–3 nm. Due to their stability and unique structure, gold nanoclusters with precise atomic numbers have been widely studied. Until now, atomically precise gold nanoclusters have been synthesised by various methods. Common ones include the Brust–Schiffrin method and the size-focusing method. With more detailed research on gold nanoclusters, more novel methods have been adopted to synthesise atomically precise gold nanoclusters, such as anti-galvanic reduction, ligand-exchange reactions from metal nanoclusters, the seed growth method, and so on. Besides, the nanoclusters also have many unique properties in electrochemical catalyses, such as the ORR, OER, etc., which are helpful for the development of the energy and environment. In this review, the synthesis methods and electrochemical applications of atomically accurate gold nanoclusters in recent years are introduced.
- 31 August 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 3 (22) , 6330-6341
Open AccessControllable synthesis and electrocatalytic applications of atomically precise gold nanoclusters
Nanoclusters are composed of metal atoms and ligands with sizes up to 2–3 nm. Due to their stability and unique structure, gold nanoclusters with precise atomic numbers have been widely studied. Until now, atomically precise gold nanoclusters have been synthesised by various methods. Common ones include the Brust–Schiffrin method and the size-focusing method. With more detailed research on gold nanoclusters, more novel methods have been adopted to synthesise atomically precise gold nanoclusters, such as anti-galvanic reduction, ligand-exchange reactions from metal nanoclusters, the seed growth method, and so on. Besides, the nanoclusters also have many unique properties in electrochemical catalyses, such as the ORR, OER, etc., which are helpful for the development of the energy and environment. In this review, the synthesis methods and electrochemical applications of atomically accurate gold nanoclusters in recent years are introduced.