Janani Sampath
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Janani Sampath has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Jim Pfaendtner
North Carolina State University
6 shared publications - Mohammed Al Otmi
Department of Chemical Engineering, University of Florida, Gainesville, Florida 32611, United States
5 shared publications - Lisa M. Hall
Department of Chemical and Biomolecular Engineering, The Ohio State University 1 , Columbus, Ohio 43210
4 shared publications Yinhao Jia
Department of Chemical Engineering, University of Florida, Gainesville, FL, USA
4 shared publicationsMohammed Al Otmi
Department of Chemical Engineering University of Florida 32611 Gainesville Florida
3 shared publicationsTaofeek Tejuosho
Department of Chemical Engineering University of Florida 32611 Gainesville Florida
3 shared publications
Latest Publications
- 10 April 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (14)
Impact of dispersity on the welding of polymer interfaces: Structure, dynamics, and interfacial entanglements from coarse-grained molecular dynamics simulations
Understanding how molecular-weight dispersity influences welding at polymer–polymer interfaces is essential for many technological applications. Here, we use molecular dynamics simulations to model thermal welding in entangled polymer melts following Schulz–Zimm molecular weight distribution, allowing us to elucidate the mechanisms driving interfacial entanglement formation. Owing to the enhanced constraint-release pathway provided by short, mobile chains in disperse melts, we find that, at fixed welding time and weight-average molecular weight Mw, the interfacial diffusion of long entangled chains accelerates with increasing dispersity. At early times, chain ends dominate interfacial diffusion, with dispersity regulating the subsequent involvement of interior segments as welding proceeds. Dispersity dictates interfacial entanglement formation, leading to an earlier onset of saturation with increasing dispersity and controlling the contribution of mechanically effective topological constraints at the interface. We further correlate the growth of interfacial entanglements with the interpenetration depth of monomers and show that dispersity modulates the minimum interpenetration distance required for entanglement development. Collectively, these results provide molecular-level insight into adhesion in industrially relevant polymer systems and highlight how dispersity can be leveraged to optimize polymer performance.
- 10 April 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (14)
Impact of dispersity on the welding of polymer interfaces: Structure, dynamics, and interfacial entanglements from coarse-grained molecular dynamics simulations
Understanding how molecular-weight dispersity influences welding at polymer–polymer interfaces is essential for many technological applications. Here, we use molecular dynamics simulations to model thermal welding in entangled polymer melts following Schulz–Zimm molecular weight distribution, allowing us to elucidate the mechanisms driving interfacial entanglement formation. Owing to the enhanced constraint-release pathway provided by short, mobile chains in disperse melts, we find that, at fixed welding time and weight-average molecular weight Mw, the interfacial diffusion of long entangled chains accelerates with increasing dispersity. At early times, chain ends dominate interfacial diffusion, with dispersity regulating the subsequent involvement of interior segments as welding proceeds. Dispersity dictates interfacial entanglement formation, leading to an earlier onset of saturation with increasing dispersity and controlling the contribution of mechanically effective topological constraints at the interface. We further correlate the growth of interfacial entanglements with the interpenetration depth of monomers and show that dispersity modulates the minimum interpenetration distance required for entanglement development. Collectively, these results provide molecular-level insight into adhesion in industrially relevant polymer systems and highlight how dispersity can be leveraged to optimize polymer performance.
- 5 March 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (6) , 3273-3282
Effect of Dispersity on the Behavior of Entangled Polymer Melts under Extensional Flow: Insights from Nonequilibrium Molecular Dynamics Simulations
- 5 March 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (6) , 3273-3282
Effect of Dispersity on the Behavior of Entangled Polymer Melts under Extensional Flow: Insights from Nonequilibrium Molecular Dynamics Simulations
- Open Access
- 27 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (5) , 1684-1693
AI-Assisted Physics-Informed Predictions of Degradation Behavior of Polymeric Anion Exchange Membranes
The global transition to hydrogen-based energy infrastructures faces significant hurdles. Chief among these are the high costs and sustainability issues associated with acid-based proton exchange membrane fuel cells. Anion exchange membrane (AEM) fuel cells offer promising cost-effective alternatives, yet their widespread adoption is limited by rapid degradation in alkaline environments. Here, we develop a framework that integrates mechanistic insights with machine learning, enabling the identification of generalized degradation behavior across diverse polymeric AEM chemistries and operating conditions. Our model successfully predicts long-term hydroxide conductivity degradation (up to 10,000 h) from minimal early time experimental data. This capability significantly reduces experimental burdens and may expedite the design of high-performance, durable AEM materials.
- 27 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (5) , 1684-1693
Open AccessAI-Assisted Physics-Informed Predictions of Degradation Behavior of Polymeric Anion Exchange Membranes
The global transition to hydrogen-based energy infrastructures faces significant hurdles. Chief among these are the high costs and sustainability issues associated with acid-based proton exchange membrane fuel cells. Anion exchange membrane (AEM) fuel cells offer promising cost-effective alternatives, yet their widespread adoption is limited by rapid degradation in alkaline environments. Here, we develop a framework that integrates mechanistic insights with machine learning, enabling the identification of generalized degradation behavior across diverse polymeric AEM chemistries and operating conditions. Our model successfully predicts long-term hydroxide conductivity degradation (up to 10,000 h) from minimal early time experimental data. This capability significantly reduces experimental burdens and may expedite the design of high-performance, durable AEM materials.
- Open Access
- 30 October 2025
- Published by Royal Society of Chemistry (RSC) in Molecular Systems Design & Engineering
- Vol. 11 (2) , 195-207
Exploring the temperature stability of CRISPR-Cas12b using molecular dynamics simulations
The thermal stability of CRISPR-Cas nucleases is a critical factor for their successful application in ‘one-pot’ diagnostic assays that utilize high-temperature isothermal amplification.
- 30 October 2025
- Published by Royal Society of Chemistry (RSC) in Molecular Systems Design & Engineering
- Vol. 11 (2) , 195-207
Open AccessExploring the temperature stability of CRISPR-Cas12b using molecular dynamics simulations
The thermal stability of CRISPR-Cas nucleases is a critical factor for their successful application in ‘one-pot’ diagnostic assays that utilize high-temperature isothermal amplification.
- Open Access
Influence of Dispersity on the Relaxation of Entangled Polymers from Molecular Dynamics Simulations
Nonequilibrium molecular dynamics simulations are used to study the deformation behavior of disperse polymer melts by tracking test chains of length N = Mw, the weight average molecular weight, in melts of varying dispersity. At high strain rates, stress decreases with increasing dispersity up to the critical stretch ratio. After flow cessation, relaxation is anisotropic: the parallel component of the radius of gyration decreases monotonically with dispersity, but the perpendicular component exhibits non-monotonic behavior, with fast relaxation at low to intermediate stretching ratios, and slower relaxation at higher stretching ratios as dispersity increases. Single-chain structure factor shows a similar trend in the perpendicular direction, with fast relaxation at intermediate length scales in disperse systems, while the parallel component remains unaffected by dispersity. These findings reveal the complex, dispersity-dependent anisotropic relaxation mechanisms in moderately entangled polymer melts far from equilibrium.
Open AccessInfluence of Dispersity on the Relaxation of Entangled Polymers from Molecular Dynamics Simulations
Nonequilibrium molecular dynamics simulations are used to study the deformation behavior of disperse polymer melts by tracking test chains of length N = Mw, the weight average molecular weight, in melts of varying dispersity. At high strain rates, stress decreases with increasing dispersity up to the critical stretch ratio. After flow cessation, relaxation is anisotropic: the parallel component of the radius of gyration decreases monotonically with dispersity, but the perpendicular component exhibits non-monotonic behavior, with fast relaxation at low to intermediate stretching ratios, and slower relaxation at higher stretching ratios as dispersity increases. Single-chain structure factor shows a similar trend in the perpendicular direction, with fast relaxation at intermediate length scales in disperse systems, while the parallel component remains unaffected by dispersity. These findings reveal the complex, dispersity-dependent anisotropic relaxation mechanisms in moderately entangled polymer melts far from equilibrium.
- 25 March 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2095-2105
Insights into Protein Unfolding under pH, Temperature, and Shear Using Molecular Dynamics Simulations
Protein biologics hold immense potential in therapeutic applications, but their ephemeral nature has hindered widespread application. The effects of different stressors on protein folding have long been studied, but whether these stressors induce protein unfolding through different pathways remains unclear. Here, we conduct all-atom molecular dynamics simulations to investigate the unfolding of bovine serum albumin (BSA) under three distinct stressors: high temperature, acidic pH, and shear stress. Our findings reveal that each stressor induces unique unfolding patterns in BSA, indicating stressor-specific unfolding pathways. Structural analyses show that high temperature significantly disrupts the protein's secondary structure, while acidic pH causes alternations in the tertiary structure, leading to domain separation. Shear stress initially perturbs the tertiary structure, initiating structural rearrangements, which causes a loss of secondary structure similar to temperature. These distinct unfolding behaviors suggest that different stabilization strategies are required to enhance protein stability under different denaturation conditions.
- 25 March 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2095-2105
Insights into Protein Unfolding under pH, Temperature, and Shear Using Molecular Dynamics Simulations
Protein biologics hold immense potential in therapeutic applications, but their ephemeral nature has hindered widespread application. The effects of different stressors on protein folding have long been studied, but whether these stressors induce protein unfolding through different pathways remains unclear. Here, we conduct all-atom molecular dynamics simulations to investigate the unfolding of bovine serum albumin (BSA) under three distinct stressors: high temperature, acidic pH, and shear stress. Our findings reveal that each stressor induces unique unfolding patterns in BSA, indicating stressor-specific unfolding pathways. Structural analyses show that high temperature significantly disrupts the protein's secondary structure, while acidic pH causes alternations in the tertiary structure, leading to domain separation. Shear stress initially perturbs the tertiary structure, initiating structural rearrangements, which causes a loss of secondary structure similar to temperature. These distinct unfolding behaviors suggest that different stabilization strategies are required to enhance protein stability under different denaturation conditions.
- Top Cited Papers
- 10 January 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 387 (6730) , 208-214
Fluorine-rich poly(arylene amine) membranes for the separation of liquid aliphatic compounds
We explored the potential for membrane materials to reduce energy and carbon requirements for the separation of aliphatic hydrocarbon feedstocks and products. We developed a series of fluorine-rich poly(arylene amine) polymer membranes that feature rigid polymer backbones with segregated perfluoroalkyl side chains. This combination imbues the polymers with resistance to dilation induced by hydrocarbon immersion without the loss of solution-based membrane fabrication techniques. These materials exhibit good separation of liquid-phase alkane isomers at ambient temperatures. The integration of these polymeric membranes into fuel and chemical feedstock separation processes was investigated in a series of experiments. Technoeconomic analyses based on these experiments indicate that the best-performing membrane materials can substantially reduce the energy costs and associated carbon emissions of hydrocarbon separations (two to 10 times, depending on product specifications).
- 10 January 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 387 (6730) , 208-214
Top Cited PapersFluorine-rich poly(arylene amine) membranes for the separation of liquid aliphatic compounds
We explored the potential for membrane materials to reduce energy and carbon requirements for the separation of aliphatic hydrocarbon feedstocks and products. We developed a series of fluorine-rich poly(arylene amine) polymer membranes that feature rigid polymer backbones with segregated perfluoroalkyl side chains. This combination imbues the polymers with resistance to dilation induced by hydrocarbon immersion without the loss of solution-based membrane fabrication techniques. These materials exhibit good separation of liquid-phase alkane isomers at ambient temperatures. The integration of these polymeric membranes into fuel and chemical feedstock separation processes was investigated in a series of experiments. Technoeconomic analyses based on these experiments indicate that the best-performing membrane materials can substantially reduce the energy costs and associated carbon emissions of hydrocarbon separations (two to 10 times, depending on product specifications).
- 14 November 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (47) , 11846-11854
Dynamics of Polymer Chains in Disperse Melts: Insights from Coarse-Grained Molecular Dynamics Simulations
Synthetic polymers have a distribution of chain lengths which can be characterized by dispersity, Đ. Their macroscopic properties are influenced by chain mobility in the melt, and controlling Đ can significantly impact these properties. In this work, we present a detailed study of the static and dynamic behavior of fully flexible polymer chains that follow the Schulz-Zimm molecular weight distribution up to Đ = 2.0 using coarse-grained molecular dynamics simulations. We analyze the behavior of test chains with molecular weights that are equal to, above, or below the molecular weight (Mw) of the melt. Static analysis shows that the conformation of these test chains remains unaffected by the heterogeneity of the surrounding chains. To study the dynamics, we computed the mean-squared displacement of test chains in melts of the same Mw and different dispersities. The mobility of test chains with N > Mw steadily increases with dispersity, due to the shorter chains contributing to early onset of disentanglement of the long chains. However, the dynamics of test chains of length N < Mw is nonmonotonic with respect to dispersity; this behavior arises from a trade-off between the increased mobility of shorter chains and the corresponding slowdown caused by the presence of longer chains. We examine the dynamic structure factor and find a weakening of tube confinement, with the effects becoming less pronounced with increasing dispersity and Mw. These findings provide insights into the rich dynamic heterogeneity of disperse polymer melts.
- 14 November 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (47) , 11846-11854
Dynamics of Polymer Chains in Disperse Melts: Insights from Coarse-Grained Molecular Dynamics Simulations
Synthetic polymers have a distribution of chain lengths which can be characterized by dispersity, Đ. Their macroscopic properties are influenced by chain mobility in the melt, and controlling Đ can significantly impact these properties. In this work, we present a detailed study of the static and dynamic behavior of fully flexible polymer chains that follow the Schulz-Zimm molecular weight distribution up to Đ = 2.0 using coarse-grained molecular dynamics simulations. We analyze the behavior of test chains with molecular weights that are equal to, above, or below the molecular weight (Mw) of the melt. Static analysis shows that the conformation of these test chains remains unaffected by the heterogeneity of the surrounding chains. To study the dynamics, we computed the mean-squared displacement of test chains in melts of the same Mw and different dispersities. The mobility of test chains with N > Mw steadily increases with dispersity, due to the shorter chains contributing to early onset of disentanglement of the long chains. However, the dynamics of test chains of length N < Mw is nonmonotonic with respect to dispersity; this behavior arises from a trade-off between the increased mobility of shorter chains and the corresponding slowdown caused by the presence of longer chains. We examine the dynamic structure factor and find a weakening of tube confinement, with the effects becoming less pronounced with increasing dispersity and Mw. These findings provide insights into the rich dynamic heterogeneity of disperse polymer melts.
- Open Access
Effect of Dispersity on Dynamic Properties of Polymer Melts: Insights from Coarse-Grained Molecular Dynamics Simulations
Synthetic polymers have a distribution of chain lengths which can be characterized by dispersity, D. Macroscopic properties of polymers are influenced by chain mobility in the melt and manipulating D can significantly impact these properties. n this work, we present a detailed study of the static and dynamic behavior of fully flexible polymer chains that follow Schulz Zimm molecular weight distribution of up to dispersity two using molecular dynamics simulation. Static analysis shows that global conformation of test chains that are equal to the average molecular weight remain ideal. At small length scales, we observe systematic deviation from Gaussian statistics as D increases, given by the structure factor plots, indicating an increased stiffness of chains in disperse melts due to contributions from longer chains. We find that the average entanglement time of chains decreases with dispersity, however, this is only seen in systems with high D and MW, for systems with low MW and D, there is no change in the entanglement time. The mobility of entangled chains is considerably enhanced due to the interplay of different dynamic mechanisms, resulting in accelerated reptation as dispersity increases. Short chains offer constraint release to the longer chains, contributing to faster dynamics and early onset of disentanglement. We capture this relaxation mechanism by the coherent dynamic structure factor for entangled probe chains in the melt, which corresponds to the weakening of tube confinement. These findings provide insights into the rich dynamic heterogeneities of highly disperse polymer melts.
Open AccessEffect of Dispersity on Dynamic Properties of Polymer Melts: Insights from Coarse-Grained Molecular Dynamics Simulations
Synthetic polymers have a distribution of chain lengths which can be characterized by dispersity, D. Macroscopic properties of polymers are influenced by chain mobility in the melt and manipulating D can significantly impact these properties. n this work, we present a detailed study of the static and dynamic behavior of fully flexible polymer chains that follow Schulz Zimm molecular weight distribution of up to dispersity two using molecular dynamics simulation. Static analysis shows that global conformation of test chains that are equal to the average molecular weight remain ideal. At small length scales, we observe systematic deviation from Gaussian statistics as D increases, given by the structure factor plots, indicating an increased stiffness of chains in disperse melts due to contributions from longer chains. We find that the average entanglement time of chains decreases with dispersity, however, this is only seen in systems with high D and MW, for systems with low MW and D, there is no change in the entanglement time. The mobility of entangled chains is considerably enhanced due to the interplay of different dynamic mechanisms, resulting in accelerated reptation as dispersity increases. Short chains offer constraint release to the longer chains, contributing to faster dynamics and early onset of disentanglement. We capture this relaxation mechanism by the coherent dynamic structure factor for entangled probe chains in the melt, which corresponds to the weakening of tube confinement. These findings provide insights into the rich dynamic heterogeneities of highly disperse polymer melts.
- 12 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (18) , 11270-11279
Investigating Correlations in Hydroxide Ion Transport in Anion Exchange Membranes from Atomistic Molecular Dynamics Simulations
- 12 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (18) , 11270-11279
Investigating Correlations in Hydroxide Ion Transport in Anion Exchange Membranes from Atomistic Molecular Dynamics Simulations