LCLei Cui

Lei Cui

*This is an algorithmically generated author record based on publicly available information.

Lei Cui has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fine-Grained 3D Building Reconstruction and Floor Height Estimation from Ultra-High-Resolution TomoSAR Data Using Geometric Constraints

    by Haoyuan Chen, Wenkang Liu, Quan Chen, Lei Cui, Mengdao Xing

    The automatic generation of semantic Level of Detail (LOD) 2 models from TomoSAR point clouds is frequently compromised by elevation side-lobes, data sparsity, and inherent geometric distortions. In particular, the energy dispersion caused by side-lobes blurs vertical structures, making the extraction of floor details and accurate floor height estimation significantly challenging. To overcome these limitations, we present a refined reconstruction framework that tightly couples tomographic imaging mechanisms with building geometric priors. For fine-grained vertical reconstruction, we employ a geometry-constrained inverse projection strategy that concentrates scattered energy back onto the building façade to mitigate side-lobe interference. This is complemented by a Global Coherent Integration method, utilizing spectral analysis to robustly recover periodic floor patterns and estimate average floor heights. In the horizontal domain, we address the conflict between noise suppression and feature preservation through a separation-of-axes morphological strategy. Unlike traditional isotropic filtering, this approach processes orthogonal directions independently to bridge data gaps while strictly maintaining sharp building corners and recovering fine substructures. Validated on airborne Ku-band datasets, the proposed method demonstrates the capability to produce topologically complete and semantically rich urban models from sparse radar observations.


  • Open Access

    An Imaging Method for Marine Targets in Corner Reflector Jamming Scenario Based on Time–Frequency Analysis and Modified Clean Technique

    by Changhong Chen, Wenkang Liu, Yuexin Gao, Lei Cui, Quan Chen, Jixiang Fu, Mengdao Xing

    In the corner reflector jamming scenario, the ship target and the corner reflector array have different degrees of defocusing in the synthetic aperture radar (SAR) image due to their complex motions, which is unfavorable to the subsequent target recognition. In this manuscript, we propose an imaging method for marine targets based on time–frequency analysis with the modified Clean technique. Firstly, the motion models of the ship target and the corner reflector array are established, and the characteristics of their Doppler parameter distribution are analyzed. Then, the Chirp Rate–Quadratic Chirp Rate Distribution (CR-QCRD) algorithm is utilized to estimate the Doppler parameters. To address the challenges posed by the aggregated scattering points of the ship target and the overlapping Doppler histories of the corner reflector array, the Clean technique is modified by short-time Fourier transform (STFT) filtering and amplitude–phase distortion correction using fractional Fourier transform (FrFT) filtering. This modification aims to improve the accuracy and efficiency of extracting scattering point components. Thirdly, in response to the poor universality of the traditional Clean iterative termination condition, the kurtosis of the residual signal spectrum amplitude is adopted as the new iterative termination condition. Compared with the existing imaging methods, the proposed method can adapt to the different Doppler distribution characteristics of the ship target and the corner reflector array, thus realizing better robustness in obtaining a well-focused target image. Finally, simulation experiments verify the effectiveness of the algorithm.


  • Open Access

    A Signal Model Based on the Space–Time Coding Array and a Novel Imaging Method Based on the Hybrid Correlation Algorithm for F-SCAN SAR

    by Yuqing Liu, Pengbo Wang, Zhirong Men, Yanan Guo, Tao He, Rui Bao, Lei Cui

    The F-SCAN principle is a better alternative to the scan-on-receive technique (SCORE) based on digital beamforming (DBF), which can avoid low gain caused by a conventional broad beam in the case of a wide swath. In F-SCAN SAR, a pencil beam scans the entire target area from far to near, providing high energy independent of the position and ensuring a low range ambiguity-to-signal ratio (RASR). Moreover, echo compression can be achieved via appropriate system parameter configuration, significantly shortening the receive window and reducing the amount of data. A wider range swath can, therefore, be achieved. However, for this novel F-SCAN SAR working mode, signal modeling and imaging processing are key issues that needed to be addressed. In this paper, the far-field synthetic antenna pattern of the space–time coding array (STCA) is first derived and analyzed, based on which the signal modeling of the F-SCAN SAR is carried out. Then, according to the signal model and echo characteristics, a novel imaging processing method based on the hybrid correlation algorithm is presented for the F-SCAN SAR. First, the dechirp operation is performed to compensate for the quadratic phase of the range time. The range compressed result is obtained after a range Fourier transform, where different range targets are successfully separated and range aliasing is avoided. Then, the modified azimuth reference function is correlated with the echo at each range cell to complete range cell migration correction (RCMC) and azimuth compensation. The received signal parameters and the Doppler parameters of each range cell are derived to update the azimuth reference function. Finally, accurate focused results are obtained in the range-frequency, azimuth-time domain. The simulation results indicate that the signal model based on the STCA can satisfy the requirements of the F-SCAN principle, and the proposed imaging algorithm can complete the precise focusing processing of the F-SCAN SAR echo.


  • Open Access

    A Modified Range Doppler Algorithm for High-Squint SAR Data Imaging

    by Yanan Guo, Pengbo Wang, Zhirong Men, Jie Chen, Xinkai Zhou, Tao He, Lei Cui

    The high-squint airborne Synthetic Aperture Radar (SAR) has the ability to detect the target area flexibly, and the detection swath is significantly increased compared with the side-looking SAR system. Therefore, it is of great significance to carry out research on high-precision imaging methods for high-squint airborne SAR. However, the high-squint SAR echoes have large Range Cell Migration (RCM), resulting in severe range–azimuth coupling and strong spatial variation. In this paper, a Modified Range Doppler Algorithm (MRDA) is proposed to cope with these effects introduced by the significant RCM in high-squint airborne SAR imaging. The bulk compensation preprocessing is first adopted to remove the considerable RCM and severe cross-coupling in a two-dimensional frequency domain. Then, Non-Linear Chirp Scaling (NLCS) in the range direction is utilized to equalize the range-variant chirp rate caused by the residual RCM and coupling and, therefore, the consistent range phase compensation can be fulfilled in range frequency domain. The modified correlation processing is executed to compensate the residual Doppler phase modulation, the residual RCM and the range-variant cubic phase modulation, which guarantees the characteristics of high efficiency and high precision. The simulations have demonstrated that the MRDA can focus the SAR echoes with large squint angles more effectively than the algorithms based on the Linear Range Walk Correction (LRWC) method.


  • Open Access

    A Novel Ultra−High Resolution Imaging Algorithm Based on the Accurate High−Order 2−D Spectrum for Space−Borne SAR

    by Tao He, Lei Cui, Pengbo Wang, Yanan Guo, Lei Zhuang

    Ultra−high spatial resolution, which can bring more detail to ground observation, is a constant pursuit of the modern space−borne synthetic aperture radar. However, the exact imaging in this case has always been a complex technical problem due to its complicated imaging geometry and signal structure. To achieve those applications’ strict requirements, a novel ultra−high resolution imaging algorithm based on an accurate high−order 2−D spectrum is presented in this paper. The only first two Doppler parameters needed as range models in the defective spectrum are replaced by a polynomial range model, which can derive coefficients from the relative motion between the radar and the targets. Then, the new spectrum is calculated through the Lagrange inversion formula. Based on this, the novel imaging algorithm is elaborated in detail as follows: The range high−order term of the spectrum is compensated completely, and the range chirp rate space variance is eliminated by the cubic phase term. Two steps of range cell migration correct are applied in this algorithm before and after the range compression; one is the traditional linear chirp scaling method, and another is the interpolation to correct the quadratic range cell migration introduced by the range chirp rate equalization. The simulation results illustrate that the proposed algorithm can handle the exact imaging processing with a 0.25 m resolution around the azimuth and range in 2 km × 6 km, which validates the feasibility of the proposed algorithm.


  • Open Access

    A Novel Imaging Algorithm for High-Resolution Wide-Swath Space-Borne SAR Based on a Spatial-Variant Equivalent Squint Range Model

    by Yanan Guo, Pengbo Wang, Jie Chen, Zhirong Men, Lei Cui, Lei Zhuang

    High-Resolution Wide-Swath (HRWS) is an important development direction of space-borne Synthetic Aperture Radar (SAR). The two-dimensional spatial variation of the Doppler parameters is the most significant characteristic of the sliding spotlight space-borne SAR system under the requirements of HRWS. Therefore, the compensation of the two-dimensional spatial variation is the most challenging problem faced in the imaging of HRWS situations. The compensatory approach is then proposed to address this problem in this paper. The spatial distribution of the Doppler parameters for the HRWS space-borne SAR data in the sliding spotlight working mode is firstly analyzed, based on which a Spatial-Variant Equivalent Slant Range Model (SV-ESRM) is put forward to accurately formulate the range history for the distributed target. By introducing an azimuth-varying term, the SV-ESRM can precisely describe the range history for not only central targets but also marginal targets, which is more adaptive to the HRWS space-borne SAR requirements. Based on the SV-ESRM, a Modified Hybrid Correlation Algorithm (MHCA) for HRWS space-borne SAR imaging is derived to focus the full-scene data on one single imaging processing. A Doppler phase perturbation incorporated with the sub-aperture method is firstly performed to eliminate the azimuth variation of the Doppler parameters and remove the Doppler spectrum aliasing. Then, an advanced hybrid correlation is employed to achieve the precise differential Range Cell Migration (RCM) correction and Doppler phase compensation. A range phase perturbation method is also utilized to eliminate the range profile defocusing caused by range-azimuth coupling for marginal targets. Finally, a de-rotation processing is performed to remove the azimuth aliasing and the residual azimuth-variance and obtain the precisely focused SAR image. Simulation shows that the SAR echoes for a 20 km × 20 km scene with a 0.25 m resolution in both the range and azimuth directions could be focused precisely via one single imaging processing, which validates the feasibility of the proposed algorithm.