Seunghyeok Jeon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Seunghyeok Jeon has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hojung Cha
Yonsei University, Seoul, Republic of Korea
8 shared publications - Jiwon Kim
Uppsala University
4 shared publications - Jeho Lee
Yonsei University, Seoul, Republic of Korea
2 shared publications - Junick Ahn
Department of Computer Science, Yonsei University, Seoul, South Korea
2 shared publications - Yonghun Choi
Korea Institute of Science and Technology, Seoul, Republic of Korea
2 shared publications - Daeyong Kim
Computer Science and Engineering, Yonsei University
1 shared publication
Latest Publications
- Open Access
- 6 March 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 25 (2) , 1-23
Phoenix: Thermal-Aware On-Device Inference of Multi-Instance DNNs for Mobile Video Applications
Running multiple deep neural networks (DNNs) simultaneously on mobile devices introduces challenges due to constrained computing resources. Previous research has explored the use of heterogeneous processors for accelerating DNN inference but often overlooks thermal issues, which can degrade computing power. In this article, we propose Phoenix, a system specifically designed to enhance the performance of multi-instance DNNs in video applications by maximizing accuracy and ensuring the achievement of a required frame rate. Phoenix allocates DNN tasks to the most suitable hardware processors, understanding complex thermal dynamics through reinforcement learning, and postpones the onset of thermal throttling. Despite optimized task allocation, continuous inference of multiple DNNs can still lead to thermal throttling. To manage performance degradation, Phoenix employs a multi-exit network, adaptively executing inference tasks to ensure consistent frame rates. Phoenix minimizes accuracy loss from early exits by optimally generating and operating multi-exit networks. We evaluated Phoenix using two different benchmarks and Virtual Youtuber streaming application. The results demonstrated that Phoenix effectively enhances device performance by delaying thermal throttling and achieving optimal accuracy while maintaining a consistent frame rate.
- 6 March 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 25 (2) , 1-23
Open AccessPhoenix: Thermal-Aware On-Device Inference of Multi-Instance DNNs for Mobile Video Applications
Running multiple deep neural networks (DNNs) simultaneously on mobile devices introduces challenges due to constrained computing resources. Previous research has explored the use of heterogeneous processors for accelerating DNN inference but often overlooks thermal issues, which can degrade computing power. In this article, we propose Phoenix, a system specifically designed to enhance the performance of multi-instance DNNs in video applications by maximizing accuracy and ensuring the achievement of a required frame rate. Phoenix allocates DNN tasks to the most suitable hardware processors, understanding complex thermal dynamics through reinforcement learning, and postpones the onset of thermal throttling. Despite optimized task allocation, continuous inference of multiple DNNs can still lead to thermal throttling. To manage performance degradation, Phoenix employs a multi-exit network, adaptively executing inference tasks to ensure consistent frame rates. Phoenix minimizes accuracy loss from early exits by optimally generating and operating multi-exit networks. We evaluated Phoenix using two different benchmarks and Virtual Youtuber streaming application. The results demonstrated that Phoenix effectively enhances device performance by delaying thermal throttling and achieving optimal accuracy while maintaining a consistent frame rate.
- Open Access
- 23 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 617-618
Poster: Mixture of Class-aware Experts for Efficient AIoT Inference
- 23 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 617-618
Open AccessPoster: Mixture of Class-aware Experts for Efficient AIoT Inference
- Open Access
- 18 June 2023
- Published by Association for Computing Machinery (ACM)
- p. 42-55
HarvNet: Resource-Optimized Operation of Multi-Exit Deep Neural Networks on Energy Harvesting Devices
- 18 June 2023
- Published by Association for Computing Machinery (ACM)
- p. 42-55
Open AccessHarvNet: Resource-Optimized Operation of Multi-Exit Deep Neural Networks on Energy Harvesting Devices
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 41 (11) , 4181-4192
PVoT: Reconfigurable Photovoltaic Array for Indoor Light Energy-Powered Batteryless Devices
Multiple photovoltaic (PV) modules are often used to provide enhanced harvesting capability for light energy-based Internet of Things (IoT) devices. PV modules facing multiple directions can lead to a situational energy loss when parts of the modules are shaded. To address this issue, existing solutions exploit reconfigurable PV arrays to acquire the optimal configuration in a given situation. However, conventional techniques are not energy efficient in estimating the harvesting capability of PV modules, and require high computation to find the optimal PV array at runtime. In this article, we propose PVoT, an energy-efficient reconfigurable PV array, which maximizes the harvesting energy for indoor IoT devices. To this end, we propose the use of photoresistors to estimate the harvesting capability with minimal energy overhead. We also provide hardware and software schemes, which perform event-driven light change detection in an energy-efficient way. Furthermore, we develop a power imbalance threshold metric to quickly find the optimal PV array at runtime. We implemented a prototype PVoT with off-the-shelf components and accompanying software. Experiments with the prototype hardware showed that PVoT achieves a gain of up to 23.9% in harvested energy compared to the existing directly connected PV array scheme.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 41 (11) , 4181-4192
PVoT: Reconfigurable Photovoltaic Array for Indoor Light Energy-Powered Batteryless Devices
Multiple photovoltaic (PV) modules are often used to provide enhanced harvesting capability for light energy-based Internet of Things (IoT) devices. PV modules facing multiple directions can lead to a situational energy loss when parts of the modules are shaded. To address this issue, existing solutions exploit reconfigurable PV arrays to acquire the optimal configuration in a given situation. However, conventional techniques are not energy efficient in estimating the harvesting capability of PV modules, and require high computation to find the optimal PV array at runtime. In this article, we propose PVoT, an energy-efficient reconfigurable PV array, which maximizes the harvesting energy for indoor IoT devices. To this end, we propose the use of photoresistors to estimate the harvesting capability with minimal energy overhead. We also provide hardware and software schemes, which perform event-driven light change detection in an energy-efficient way. Furthermore, we develop a power imbalance threshold metric to quickly find the optimal PV array at runtime. We implemented a prototype PVoT with off-the-shelf components and accompanying software. Experiments with the prototype hardware showed that PVoT achieves a gain of up to 23.9% in harvested energy compared to the existing directly connected PV array scheme.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 41 (11) , 3850-3861
DynLiB: Maximizing Energy Availability of Hybrid Li-Ion Battery Systems
Battery-powered devices commonly use Li-ion batteries due to their high energy density. Unfortunately, low ambient temperature and high discharge current significantly affect the available capacity of Li-ion batteries at runtime. One solution to handle this issue is to construct a hybrid energy storage (HES) system, taking advantage of the different performance characteristics of various Li-ion batteries. Conventional HES techniques often configure systems without considering the hardware overhead and capacity loss of batteries. Moreover, dynamic energy management in HES was not considered adequately due to severe power leakage. In this article, we propose DynLiB, a reconfigurable HES architecture that provides high energy availability in various runtime environments. DynLiB constructs HES with only two types of batteries, the main battery and the auxiliary battery, to reduce the operational cost of the hardware. The capacity of each battery is determined based on the application profile that characterizes the runtime factors. DynLiB supports energy transfer between batteries so that the available energy is maximized by dynamically transferring energy between the batteries, depending on the runtime environment. We implemented a prototype system to validate the efficacy of DynLiB. The experimental results showed that DynLiB achieved an average energy gain of 27.2% compared to a single-type battery system in various runtime environments.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 41 (11) , 3850-3861
DynLiB: Maximizing Energy Availability of Hybrid Li-Ion Battery Systems
Battery-powered devices commonly use Li-ion batteries due to their high energy density. Unfortunately, low ambient temperature and high discharge current significantly affect the available capacity of Li-ion batteries at runtime. One solution to handle this issue is to construct a hybrid energy storage (HES) system, taking advantage of the different performance characteristics of various Li-ion batteries. Conventional HES techniques often configure systems without considering the hardware overhead and capacity loss of batteries. Moreover, dynamic energy management in HES was not considered adequately due to severe power leakage. In this article, we propose DynLiB, a reconfigurable HES architecture that provides high energy availability in various runtime environments. DynLiB constructs HES with only two types of batteries, the main battery and the auxiliary battery, to reduce the operational cost of the hardware. The capacity of each battery is determined based on the application profile that characterizes the runtime factors. DynLiB supports energy transfer between batteries so that the available energy is maximized by dynamically transferring energy between the batteries, depending on the runtime environment. We implemented a prototype system to validate the efficacy of DynLiB. The experimental results showed that DynLiB achieved an average energy gain of 27.2% compared to a single-type battery system in various runtime environments.
- 10 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 21 (10) , 3744-3756
Optimizing Energy Consumption of Mobile Games
Games are energy-intensive applications on mobile devices. Optimizing the energy efficiency of games is hence critical for battery-limited mobile devices. Although the advent of energy-aware scheduling (EAS) integrated in recent devices has provided opportunities for improved energy management, the framework is not specifically tuned for game applications. In this paper, we aim to improve the energy efficiency of game applications running on EAS-enabled mobile devices. To this end, we first analyze the functional characteristics of games, and investigate the source of the energy inefficiency. We then propose a scheme, called System-level Energy-optimization for Game Applications (SEGA), to improve the energy efficiency of games. SEGA governs CPU and GPU power consumption in a tightly coupled manner by employing three key techniques: (1) Lsync-aware GPU DVFS governor, (2) adaptive capacity clamping, and (3) on-demand touch boosting. We implemented SEGA on the latest Android-based smartphones. The evaluation results for 23 popular games showed that SEGA reduced the energy consumption of the Google Pixel 2 XL and Samsung Galaxy S9 Plus smartphones, at the device level, by 6.1–22.3 and 4.0–11.7 percent, respectively, with a quality of service (QoS) degradation of 1.1 and 0.5 percent, on average.
- 10 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 21 (10) , 3744-3756
Optimizing Energy Consumption of Mobile Games
Games are energy-intensive applications on mobile devices. Optimizing the energy efficiency of games is hence critical for battery-limited mobile devices. Although the advent of energy-aware scheduling (EAS) integrated in recent devices has provided opportunities for improved energy management, the framework is not specifically tuned for game applications. In this paper, we aim to improve the energy efficiency of game applications running on EAS-enabled mobile devices. To this end, we first analyze the functional characteristics of games, and investigate the source of the energy inefficiency. We then propose a scheme, called System-level Energy-optimization for Game Applications (SEGA), to improve the energy efficiency of games. SEGA governs CPU and GPU power consumption in a tightly coupled manner by employing three key techniques: (1) Lsync-aware GPU DVFS governor, (2) adaptive capacity clamping, and (3) on-demand touch boosting. We implemented SEGA on the latest Android-based smartphones. The evaluation results for 23 popular games showed that SEGA reduced the energy consumption of the Google Pixel 2 XL and Samsung Galaxy S9 Plus smartphones, at the device level, by 6.1–22.3 and 4.0–11.7 percent, respectively, with a quality of service (QoS) degradation of 1.1 and 0.5 percent, on average.
- 1 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 39 (11) , 3893-3905
Optimizing Discharge Efficiency of Reconfigurable Battery With Deep Reinforcement Learning
- 1 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 39 (11) , 3893-3905
Optimizing Discharge Efficiency of Reconfigurable Battery With Deep Reinforcement Learning
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Always-On Quick Charging for Mobile Devices
Mobile users are always demanding extended availability in their battery use. Together with enlarged battery capacity, fast charging is one approach that provides an improved user experience in battery use. Recently, device manufacturers have been developing a variety of fast charging techniques for mobile devices. However, the existing techniques severely reduce the charging power when the device is in use while charging. We experimentally demonstrate that the primary cause of the reduction in the charge speed during device use is to cope with the performance degradation incurred by heat generation. We then propose an adaptive charging scheme, called Always-on Quick Charging, which enables fast charging especially when the device is in use. The key idea of our approach is to adjust the charging power while ensuring that the heat generated by the charging does not affect the performance. The proposed scheme is implemented in Google's Pixel 2XL smartphone. The experiment with a real-world usage scenario shows that the charging speed of the proposed scheme is up to 2.4 times faster than the default scheme, while preserving device performance.
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Always-On Quick Charging for Mobile Devices
Mobile users are always demanding extended availability in their battery use. Together with enlarged battery capacity, fast charging is one approach that provides an improved user experience in battery use. Recently, device manufacturers have been developing a variety of fast charging techniques for mobile devices. However, the existing techniques severely reduce the charging power when the device is in use while charging. We experimentally demonstrate that the primary cause of the reduction in the charge speed during device use is to cope with the performance degradation incurred by heat generation. We then propose an adaptive charging scheme, called Always-on Quick Charging, which enables fast charging especially when the device is in use. The key idea of our approach is to adjust the charging power while ensuring that the heat generated by the charging does not affect the performance. The proposed scheme is implemented in Google's Pixel 2XL smartphone. The experiment with a real-world usage scenario shows that the charging speed of the proposed scheme is up to 2.4 times faster than the default scheme, while preserving device performance.