Youchuang Chao
Youchuang Chao has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Ho Cheung Shum
Department of Mechanical Engineering The University of Hong Kong Hong Kong China
12 shared publications Hao Yuan
School of Life Sciences and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031, China
3 shared publicationsJingxuan Tian
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong 999077, (SAR), Hong Kong, P. R. China
3 shared publications- Lailai Zhu
National University of Singapore
3 shared publications - Zijing Ding
Harbin Institute of Technology
3 shared publications - Alban Sauret
Department of Mechanical Engineering, University of Maryland, College Park, Maryland 20742, USA
2 shared publications
Latest Publications
- 10 August 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (6)
Rebound dynamics of polymer drops impacting on soft solids at low Weber numbers
The impact of polymer drops on soft solid substrates occurs frequently in engineering applications such as inkjet printing and pesticide spraying. Here, we investigate how substrate elasticity and polymer concentration affect drop rebound at low Weber numbers. Four representative rebound metrics, including the contact time, maximum contact diameter, maximum equatorial diameter, and restitution coefficient, are analyzed. Experiments show that the rebound metrics depend only weakly on substrate elasticity, except for a modest increase in the maximum contact diameter on the ultrasoft gel. With increasing polymer concentration, the contact time increases and the maximum contact diameter decreases, whereas the maximum equatorial diameter and restitution coefficient remain nearly unchanged. Further direct numerical simulations suggest that such an increase in contact time is presumably associated with the increased solution viscosity rather than polymer elasticity. These findings advance our understanding of how substrate elasticity and drop viscoelasticity influence complex drops impacting onto compliant substrates at a low velocity.
- 10 August 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (6)
Rebound dynamics of polymer drops impacting on soft solids at low Weber numbers
The impact of polymer drops on soft solid substrates occurs frequently in engineering applications such as inkjet printing and pesticide spraying. Here, we investigate how substrate elasticity and polymer concentration affect drop rebound at low Weber numbers. Four representative rebound metrics, including the contact time, maximum contact diameter, maximum equatorial diameter, and restitution coefficient, are analyzed. Experiments show that the rebound metrics depend only weakly on substrate elasticity, except for a modest increase in the maximum contact diameter on the ultrasoft gel. With increasing polymer concentration, the contact time increases and the maximum contact diameter decreases, whereas the maximum equatorial diameter and restitution coefficient remain nearly unchanged. Further direct numerical simulations suggest that such an increase in contact time is presumably associated with the increased solution viscosity rather than polymer elasticity. These findings advance our understanding of how substrate elasticity and drop viscoelasticity influence complex drops impacting onto compliant substrates at a low velocity.
- 13 July 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 338
Dynamics of liquid films falling down a porous substrate in the presence of an ambient gas flow
- 13 July 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 338
Dynamics of liquid films falling down a porous substrate in the presence of an ambient gas flow
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Effect of electromagnetic field on the wave dynamics of conducting viscoelastic fluid flow
This study focuses on the linear and nonlinear stability analysis of an electrically conducting viscoelastic fluid flowing over an inclined plane under the influence of an electromagnetic field. The constitutive equation for the non-Newtonian flow field follows the rheological properties of Walters' B″ model. The nonlinear evolution equation for the free surface is derived using the classical momentum integral approach. The linear stability analysis discloses that both viscoelasticity and the presence of an electric field destabilize the liquid film, while the magnetic field enhances its stability. The weakly nonlinear analysis reveals the existence of different flow zones in the vicinity of instability onset, which are significantly influenced when the viscoelasticity and the intensity of the electromagnetic field vary. The stronger magnetic field dissipates the weakly nonlinear wave amplitude, which is increased by the higher viscoelasticity and electric field. Furthermore, the numerical solution of the surface evolution equation ensures the occurrence of different types of permanent finite-amplitude waves in the supercritical stable zone. The long-time waveforms manifest themselves as either a permanent form of time-independent waves or as time-dependent modes with slight amplitude oscillations. Both viscoelasticity and electromagnetic field substantially influence the shape and amplitude of the wave. Overall, viscoelasticity and the electric field tend to destabilize and induce oscillatory long-time wave behavior, whereas the magnetic field counteracts these effects and aids stabilization.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Effect of electromagnetic field on the wave dynamics of conducting viscoelastic fluid flow
This study focuses on the linear and nonlinear stability analysis of an electrically conducting viscoelastic fluid flowing over an inclined plane under the influence of an electromagnetic field. The constitutive equation for the non-Newtonian flow field follows the rheological properties of Walters' B″ model. The nonlinear evolution equation for the free surface is derived using the classical momentum integral approach. The linear stability analysis discloses that both viscoelasticity and the presence of an electric field destabilize the liquid film, while the magnetic field enhances its stability. The weakly nonlinear analysis reveals the existence of different flow zones in the vicinity of instability onset, which are significantly influenced when the viscoelasticity and the intensity of the electromagnetic field vary. The stronger magnetic field dissipates the weakly nonlinear wave amplitude, which is increased by the higher viscoelasticity and electric field. Furthermore, the numerical solution of the surface evolution equation ensures the occurrence of different types of permanent finite-amplitude waves in the supercritical stable zone. The long-time waveforms manifest themselves as either a permanent form of time-independent waves or as time-dependent modes with slight amplitude oscillations. Both viscoelasticity and electromagnetic field substantially influence the shape and amplitude of the wave. Overall, viscoelasticity and the electric field tend to destabilize and induce oscillatory long-time wave behavior, whereas the magnetic field counteracts these effects and aids stabilization.
- 12 January 2026
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 259
Linear instability in Taylor–Couette flows with non-ideal fluids
- 12 January 2026
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 259
Linear instability in Taylor–Couette flows with non-ideal fluids
- 30 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (5) , 3732-3738
Interface Dynamics of Droplet Impact onto a Viscoelastic Liquid Pool
The impact of droplets on a liquid pool is widely present in various fields such as inkjet printing, spray coating, and oil recovery. While the influence of the droplet phase, such as viscosity and surface tension, on impact dynamics has been extensively investigated, the role of the pool phase, especially in the viscoelastic scenario, remains less understood. In this work, we experimentally and numerically study the impact dynamics of oil droplets on an immiscible liquid pool of polymer aqueous solutions. We find that after droplet impact, the elasticity of the viscoelastic liquid pool could enhance the curvature of the cavity, reduce its depth, and shorten the length of the forward jet, which are further confirmed by direct numerical simulations. Intriguingly, we also find a nonmonotonic dependence of the threshold of Reynolds number for droplet bouncing on the polymer concentration, which can be linked to the critical overlap concentration of the polymer solution. Our findings enrich the understanding of droplet impact onto viscoelastic liquids and may contribute to the development of advanced technologies, for instance, 3D printing and droplet encapsulation.
- 30 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (5) , 3732-3738
Interface Dynamics of Droplet Impact onto a Viscoelastic Liquid Pool
The impact of droplets on a liquid pool is widely present in various fields such as inkjet printing, spray coating, and oil recovery. While the influence of the droplet phase, such as viscosity and surface tension, on impact dynamics has been extensively investigated, the role of the pool phase, especially in the viscoelastic scenario, remains less understood. In this work, we experimentally and numerically study the impact dynamics of oil droplets on an immiscible liquid pool of polymer aqueous solutions. We find that after droplet impact, the elasticity of the viscoelastic liquid pool could enhance the curvature of the cavity, reduce its depth, and shorten the length of the forward jet, which are further confirmed by direct numerical simulations. Intriguingly, we also find a nonmonotonic dependence of the threshold of Reynolds number for droplet bouncing on the polymer concentration, which can be linked to the critical overlap concentration of the polymer solution. Our findings enrich the understanding of droplet impact onto viscoelastic liquids and may contribute to the development of advanced technologies, for instance, 3D printing and droplet encapsulation.
- Open Access
Stability of surfactant-laden double-layered viscoelastic fluids flowing over an inclined plane
The linear dynamics and instability mechanisms of double-layered weakly viscoelastic fluid flowing over an inclined plane are analyzed in the presence of insoluble surfactant at both the free surface and interface. The constitutive equation of the non-Newtonian flow field follows the rheological property of Walters' $B^{''}$ model. The Orr-Sommerfeld-type boundary value problem is derived using the classical normal-mode approach and numerically solved within the framework of the Chebyshev spectral collocation method. Numerical analysis detects three distinct types of instabilities: surface, interface, and interface surfactant modes. The viscoelasticity of both the top and bottom layers strengthens the surface wave instability in the longwave region. On the other hand, the behavior of interfacial wave instability depends on both viscosity and density stratification. Stronger top-layer viscoelasticity suppresses interfacial instability, while increased bottom-layer viscoelasticity amplifies it, provided the viscosity ratio $m>1$. However, in the case of $m<1$, top-layer viscoelasticity provides strong interfacial wave stabilization in the longwave region but becomes comparatively weak in the shortwave regime. The viscoelasticity of the bottom layer has a destabilizing/stabilizing effect on the interfacial wave in the longwave/shortwave regions. Meanwhile, top-layer viscoelasticity stabilizes the interfacial surfactant mode. However, this mode can be destabilized in the vicinity of the instability threshold but is effectively stabilized far away from the onset of instability by higher bottom-layer viscoelasticity.Open AccessStability of surfactant-laden double-layered viscoelastic fluids flowing over an inclined plane
The linear dynamics and instability mechanisms of double-layered weakly viscoelastic fluid flowing over an inclined plane are analyzed in the presence of insoluble surfactant at both the free surface and interface. The constitutive equation of the non-Newtonian flow field follows the rheological property of Walters' $B^{''}$ model. The Orr-Sommerfeld-type boundary value problem is derived using the classical normal-mode approach and numerically solved within the framework of the Chebyshev spectral collocation method. Numerical analysis detects three distinct types of instabilities: surface, interface, and interface surfactant modes. The viscoelasticity of both the top and bottom layers strengthens the surface wave instability in the longwave region. On the other hand, the behavior of interfacial wave instability depends on both viscosity and density stratification. Stronger top-layer viscoelasticity suppresses interfacial instability, while increased bottom-layer viscoelasticity amplifies it, provided the viscosity ratio $m>1$. However, in the case of $m<1$, top-layer viscoelasticity provides strong interfacial wave stabilization in the longwave region but becomes comparatively weak in the shortwave regime. The viscoelasticity of the bottom layer has a destabilizing/stabilizing effect on the interfacial wave in the longwave/shortwave regions. Meanwhile, top-layer viscoelasticity stabilizes the interfacial surfactant mode. However, this mode can be destabilized in the vicinity of the instability threshold but is effectively stabilized far away from the onset of instability by higher bottom-layer viscoelasticity. - Open Access
- 6 May 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (18) , 184001
Nonmonotonic Motion of Sliding Droplets on Strained Soft Solids
Soft materials are ubiquitous in technological applications that require deformability, for instance, in flexible, water-repellent coatings. However, the wetting properties of prestrained soft materials are only beginning to be explored. Here we study the sliding dynamics of droplets on prestrained soft silicone gels, both in tension and in compression. Intriguingly, in compression we find a nonmonotonic strain dependence of the sliding speed: mild compressions decelerate the droplets, but stronger compressions lead again to faster droplet motion. Upon further compression, creases nucleate under the droplets until, finally, the entire surface undergoes the creasing instability, causing a “run-and-stop” motion. We quantitatively elucidate the speed modification for moderate prestrains by incremental viscoelasticity, while the acceleration for larger prestrains turns out to be linked to the solid pressure, presumably through a lubrication effect of expelled oligomers.
- 6 May 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (18) , 184001
Open AccessNonmonotonic Motion of Sliding Droplets on Strained Soft Solids
Soft materials are ubiquitous in technological applications that require deformability, for instance, in flexible, water-repellent coatings. However, the wetting properties of prestrained soft materials are only beginning to be explored. Here we study the sliding dynamics of droplets on prestrained soft silicone gels, both in tension and in compression. Intriguingly, in compression we find a nonmonotonic strain dependence of the sliding speed: mild compressions decelerate the droplets, but stronger compressions lead again to faster droplet motion. Upon further compression, creases nucleate under the droplets until, finally, the entire surface undergoes the creasing instability, causing a “run-and-stop” motion. We quantitatively elucidate the speed modification for moderate prestrains by incremental viscoelasticity, while the acceleration for larger prestrains turns out to be linked to the solid pressure, presumably through a lubrication effect of expelled oligomers.
- 17 October 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (43) , 23094-23101
Frozen Patterns in Viscoelastic Droplets Impacting on a Subcooled Surface
The impact of droplets on a cold surface is ubiquitous in nature and various industrial applications, ranging from the icing of supercooled droplets on aircraft to the solidification of ink droplets in 3D printing. However, our understanding of the impact dynamics of droplets of complex fluids on cold surfaces is still very limited. Here, we experimentally study the spreading and frozen patterns of viscoelastic polymer droplets falling onto a subcooled substrate. We observe that the maximum spreading diameter of post-impact droplets decreases with increasing the subcooling temperature and the polymer concentration. Remarkably, all experimental data for spreading collapse into a universal curve, following the classic theory that accounts for inertial, capillary, and viscous forces. Unexpectedly, we find that, in contrast to the case of pure fluids, which exhibits three frozen modes, only two distinct modes, namely, freezing and hierarchical cracking, can be observed for polymer droplets. Finally, based on the undercooling temperature and polymer concentration, we construct a phase diagram for characterizing the morphologies of all frozen patterns. We expect that our findings may have implications in understanding the solidification of complex fluids on cold surfaces, for instance, in the fields of spray coating, inkjet printing, and additive manufacturing.
- 17 October 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (43) , 23094-23101
Frozen Patterns in Viscoelastic Droplets Impacting on a Subcooled Surface
The impact of droplets on a cold surface is ubiquitous in nature and various industrial applications, ranging from the icing of supercooled droplets on aircraft to the solidification of ink droplets in 3D printing. However, our understanding of the impact dynamics of droplets of complex fluids on cold surfaces is still very limited. Here, we experimentally study the spreading and frozen patterns of viscoelastic polymer droplets falling onto a subcooled substrate. We observe that the maximum spreading diameter of post-impact droplets decreases with increasing the subcooling temperature and the polymer concentration. Remarkably, all experimental data for spreading collapse into a universal curve, following the classic theory that accounts for inertial, capillary, and viscous forces. Unexpectedly, we find that, in contrast to the case of pure fluids, which exhibits three frozen modes, only two distinct modes, namely, freezing and hierarchical cracking, can be observed for polymer droplets. Finally, based on the undercooling temperature and polymer concentration, we construct a phase diagram for characterizing the morphologies of all frozen patterns. We expect that our findings may have implications in understanding the solidification of complex fluids on cold surfaces, for instance, in the fields of spray coating, inkjet printing, and additive manufacturing.
- 9 September 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (9) , 094001
Stability of gravity-driven viscous films flowing down a soft cylinder
We study the stability of gravity-driven viscous liquid films flowing down a vertical cylinder that is uniformly coated with a thin layer of elastic solids. Combining the gravity-driven viscous flows with the elastic deformation of the coated soft layer, we formulate a long-wave model to describe the evolution of a film flow-soft structure coupled system. Based on the model, we systematically examine the impact of the coating properties, including the elasticity and thickness on the temporal and spatiotemporal stability. Temporal stability analysis shows that the soft layer plays a dual role, namely, the elasticity acts as a destabilizing factor, leading to large deformations of both film interface and soft surface. However, due to the geometrical effect, increasing the layer thickness stabilizes the Rayleigh-Plateau instability. By contrast, the linear phase speed is always enhanced with increasing the elasticity or the thickness of the coated layer. We then analyze the spatiotemporal nature of free-surface instabilities and find that the elasticity can trigger the film flows from being absolutely unstable to convectively unstable. Transient numerical solutions of the full asymptotic model further verify the predictions from linear stability analysis, and more importantly, reveal the nonlinear effect of the softness. Compared to liquid films falling down the cylinder with rigid walls, the soft surface can enhance the coalescence of faster, larger sliding droplets with preceding slower, smaller sliding ones, thus resulting in a more unstable system. Our study highlights the potential of coating a thin layer of soft materials onto the walls of substrate to regulate the dynamics of liquid film systems, and may have implications for the emerging bioinspired applications; for instance, the large-scale collection and transport of water on flexible microfiber arrays.
- 9 September 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (9) , 094001
Stability of gravity-driven viscous films flowing down a soft cylinder
We study the stability of gravity-driven viscous liquid films flowing down a vertical cylinder that is uniformly coated with a thin layer of elastic solids. Combining the gravity-driven viscous flows with the elastic deformation of the coated soft layer, we formulate a long-wave model to describe the evolution of a film flow-soft structure coupled system. Based on the model, we systematically examine the impact of the coating properties, including the elasticity and thickness on the temporal and spatiotemporal stability. Temporal stability analysis shows that the soft layer plays a dual role, namely, the elasticity acts as a destabilizing factor, leading to large deformations of both film interface and soft surface. However, due to the geometrical effect, increasing the layer thickness stabilizes the Rayleigh-Plateau instability. By contrast, the linear phase speed is always enhanced with increasing the elasticity or the thickness of the coated layer. We then analyze the spatiotemporal nature of free-surface instabilities and find that the elasticity can trigger the film flows from being absolutely unstable to convectively unstable. Transient numerical solutions of the full asymptotic model further verify the predictions from linear stability analysis, and more importantly, reveal the nonlinear effect of the softness. Compared to liquid films falling down the cylinder with rigid walls, the soft surface can enhance the coalescence of faster, larger sliding droplets with preceding slower, smaller sliding ones, thus resulting in a more unstable system. Our study highlights the potential of coating a thin layer of soft materials onto the walls of substrate to regulate the dynamics of liquid film systems, and may have implications for the emerging bioinspired applications; for instance, the large-scale collection and transport of water on flexible microfiber arrays.
- Open Access
- 23 April 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (18) , 3845-3853
Spontaneous oscillation of an active filament under viscosity gradients
We investigate the effects of uniform viscosity gradients on the spontaneous oscillations of an elastic, active filament in viscous fluids.
- 23 April 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (18) , 3845-3853
Open AccessSpontaneous oscillation of an active filament under viscosity gradients
We investigate the effects of uniform viscosity gradients on the spontaneous oscillations of an elastic, active filament in viscous fluids.