JQJulian Quick

Julian Quick

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Julian Quick has a total of 117 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The AWAKEN wind farm benchmark – Part 2: Modeling results

    by Nicola Bodini, Patrick Moriarty, Regis Thedin, Paula Doubrawa, Cristina Archer, Myra Blaylock, Carlo Bottasso, Bruno Carmo, Lawrence Cheung, Camille Dubreuil, et al.

    Accurately modeling wind farm performance in complex atmospheric flows remains a challenge. This paper presents the modeling results of the American WAKE experimeNt (AWAKEN) wind farm benchmark, a collaborative effort involving 16 research groups from academia and industry within the International Energy Agency Wind Technology Collaboration Programme Task 57. The study evaluates a diverse suite of simulation tools, ranging from fast-running engineering wake models to high-fidelity large-eddy simulations, against a diurnal case study observed during the AWAKEN campaign. The benchmark utilized a three-phase structure to progressively assess model performance as observational data availability increased. Initial blind predictions showed that higher-fidelity models did not uniformly outperform simpler simulation tools in terms of aggregate error metrics; however, this largely reflects differences in inflow strategy rather than wake physics fidelity – simpler models directly ingested high-quality observations, while higher-fidelity models were tasked with predicting the inflow from coarser reanalysis boundary conditions. A distinct spatial bias was observed where models struggled to resolve the interplay between a low-level jet, wakes, and terrain-induced flow acceleration. In subsequent phases, access to progressively richer observational data enabled model refinement that reduced mean absolute error by up to 40 %; however, these gains primarily reflect state-conditioned calibration to a well-observed atmospheric state. Overall, the study demonstrates that inflow characterization defines a lower bound on achievable model accuracy that is independent of wake modeling fidelity – a finding with direct implications for pre-construction energy assessment workflows. While the limited ability to resolve local terrain-flow interactions under single-day conditions represents a recognized constraint, the findings on wake modeling and real-world validation still provide valuable guidance for model application and future benchmark design.


  • Open Access

    Validation of RANS-calibrated engineering models and ANN-based surrogate for wind farm flow simulation and layout optimization

    by Jens Peter Schøler, Jens Peter, Ernestas Simutis, van der Laan, M. Paul, Julian Quick, Pierre-Elouan Réthoré

    Accurate yet efficient wake modeling is essential for wind farm layout optimization (WFLO). Wind turbine wakes are disturbed regions of flow behind a wind turbine, characterized by lower mean wind speeds and higher turbulence, which reduce downstream power production and increase structural loading. This study compares an artificial neural network (ANN)-based surrogate trained on Reynolds-averaged Navier–Stokes (RANS) data with two representative engineering wake models based on the TurbOPark and super-Gaussian formulations. The work includes recalibration of the engineering models, a systematic flow simulation study across varying turbine counts and spacings, and WFLO benchmarks validated against RANS-based annual energy production (AEP). Results show that the ANN surrogate achieves the lowest RMSE and MAPE across all scenarios in flow estimation, albeit at a higher computational cost. In WFLO, the TurbOPark-based model produced the highest RANS-validated AEP layouts, despite having lower predictive accuracy, suggesting that optimization complexity influences outcomes. Blockage modeling increased computational cost without improving accuracy.


  • Open Access

    Graph neural operator for wind farm wake flow

    by Jens Peter Schøler, Jens Peter, Frederik Peder Weilmann Rasmussen, Julian Quick, Pierre-Elouan Réthoré

    Wind farm flow simulations are computationally expensive. However, numerous simulations are often required to account for wake effects from multiple neighboring farms, which motivates the development of data-driven surrogate models. Such surrogates may also enable the consideration of neighboring farm wakes during layout optimization. Most existing data-driven surrogate approaches rely on fixed algebraic superposition principles, which may limit flexibility when extending to higher-fidelity data sources that capture nonlinear wake interactions. We propose a novel method that embeds a trainable and scalable superposition principle within a graph neural operator (GNO) architecture, enabling the model to learn complex wake combinations directly from data. The model consists of two sequential graph neural network (GNN) layers: the first encodes turbine–turbine interactions into a latent representation, while the second combines these latent turbine states to predict the wind speed at a desired location. The GNO is trained on a large dataset generated with PyWake, a steady-state engineering wake model. More than 2000 unique layouts were procedurally generated for training, with an additional 998 for testing. The GNO accurately identifies regions of strong wake interaction, although the spatial extent of wakes is slightly underestimated compared to the simulated values in cases with pronounced wake effects. Overall, the proposed GNO represents a methodological advancement in data-driven wind farm flow surrogates, introducing a new conceptual framework inspired by established engineering wake modeling principles.


  • Open Access

    Adversarial Sensor Errors for Safe and Robust Wind Turbine Fleet Control

    by Julian Quick, Marcus Binder Nilsen, Andreas Bechmann, Tran Nguyen Le, Pierre-Elouan Mikael Réthoré

    Plant-level control is an emerging wind energy technology that presents opportunities and challenges. By controlling turbines in a coordinated manner via a central controller, it is possible to achieve greater wind power plant efficiency. However, there is a risk that measurement errors will confound the process, or even that hackers will alter the telemetry signals received by the central controller. This paper presents a framework for developing a safe plant controller by training it with an adversarial agent designed to confound it. This necessitates training the adversary to confound the controller, creating a sort of circular logic or “Arms Race”. This paper examines three broad training approaches for co-training the protagonist and adversary, finding that an Arms Race approach yields the best results. Results indicate that the Arms Race adversarial training reduced worst-case performance degradation from 39% power loss to 7.9% power gain relative to a baseline operational strategy.

  • Open Access

    WindGym: A Reinforcement Learning Environment for Wind Farm Control

    by Marcus Binder Nilsen, Julian Quick, Teodor Olof Benedict Åstrand, Ernestas Simutis, Pierre-Elouan Mikael Réthoré


  • Open Access

    The AWAKEN wind farm benchmark, Part 2: Modeling results

    by Nicola Bodini, Patrick Moriarty, Regis Thedin, Paula Doubrawa, Cristina Archer, Myra Blaylock, Carlo Bottasso, Bruno Carmo, Lawrence Cheung, Camille Dubreuil, et al.

    Accurately modeling wind farm performance in complex atmospheric flows remains a challenge. This paper presents the modeling results of the American WAKE experimeNt (AWAKEN) wind farm benchmark, a collaborative effort involving 16 research groups from academia and industry within the International Energy Agency Wind Technology Collaboration Programme Task 57. The study evaluates a diverse suite of simulation tools, ranging from fast-running engineering wake models to high-fidelity large-eddy simulations, against a diurnal case study observed during the AWAKEN campaign. The benchmark utilized a three-phase structure to progressively assess model performance as observational data availability increased. Initial blind predictions showed that higher-fidelity models did not uniformly outperform simpler simulation tools. A distinct spatial bias was observed where models struggled to resolve the interplay between a low-level jet, wakes, and terrain-induced flow acceleration. In subsequent phases, leveraging additional measurements for model improvement led to a reduction in mean absolute error across the model ensemble; however, this effect was most pronounced in engineering wake models, where targeted calibration reduced error by up to 40 %. Overall, the study demonstrates that inflow characterization remains a primary prerequisite for accuracy, particularly for models relying on coarse forcing datasets. While the limited ability to resolve local terrain-flow interactions under single-day conditions represent a recognized constraint, the overall findings on wake modeling and real-world validation still provide valuable guidance for model application and for mitigating this limitation.


  • Open Access

    Supplementary material to "The AWAKEN wind farm benchmark, Part 2: Modeling results"

    by Nicola Bodini, Patrick Moriarty, Regis Thedin, Paula Doubrawa, Cristina Archer, Myra Blaylock, Carlo Bottasso, Bruno Carmo, Lawrence Cheung, Camille Dubreuil, et al.

  • Open Access

    Reductions in wind farm main bearing rating lives resulting from wake impingement

    by Julian Quick, Edward Hart, Marcus Binder Nilsen, Rasmus Sode Lund, Jaime Liew, Piinshin Huang, Pierre-Elouan Rethore, Jonathan Keller, Wooyong Song, Yi Guo

    This paper studies the impacts of wake impingement on main bearing rating lives predicted during the wind turbine design stage. A computational tool chain was developed to explore and quantify these effects across a wind farm populated by 10 MW wind turbines. Wind field and turbine load modelling was undertaken using the Dynamiks Python package, including application of a dynamic wake meandering model. The ISO 281 basic bearing rating life formulation was subsequently applied in order to evaluate impacts from wake effects. Analyses included a two-turbine parametric analysis, followed by a full wind farm analysis undertaken for the TotalControl 32-turbine reference wind farm, including full wind rose simulations across all operational wind speeds. Site conditions were accounted for using a Weibull wind speed distribution and a range of parametric wind direction rose models. Results indicate that wind farm main bearing rating lives are negatively impacted by the effects of wake impingement, resulting in rating life reductions for the analysed wind farm of the order of 16 % on average and as much as 20 %–25 %, both for the locating main bearing. Despite these high sensitivities, it is important to note that these resultant rating lives (i.e. the predicted lives) still far exceed the standard wind turbine operational lifetimes of 20–30 years. Wake impacts were also found to be asymmetrically related to the side on which the rotor is impinged, suggesting that, for the main bearing, there may be a “better” side for wake impingement to occur. Rating life sensitivities to wind rose shape were also observed. While these findings must be interpreted with due consideration for the various methodological limitations present, they provide compelling evidence that wake effects at the wind farm level should necessarily be included when undertaking main bearing operational load modelling, rating life assessment, or other load-related analyses.


  • Open Access

    Validation of RANS-calibrated engineering models and ANN-based surrogate for wind farm flow simulation and layout optimization

    by Jens Peter Schøler, Jens Peter, Ernestas Simutis, van der Laan, M. Paul, Julian Quick, Pierre-Elouan Réthoré

    Accurate yet efficient wake modeling is essential for wind farm layout optimization (WFLO). Wind turbine wakes are disturbed regions of flow behind a wind turbine, characterized by lower mean wind speeds and higher turbulence, which reduce downstream power production and increase structural loading. This study compares an Artificial Neural Network (ANN)-based surrogate trained on Reynolds Averaged Navier-Stokes (RANS) data with two representative engineering wake models based on the TurbOPark and Super-Gaussian formulations. The work includes recalibration of the engineering models, a systematic flow simulation study across varying turbine counts and spacings, and WFLO benchmarks validated against RANS-based Annual Energy Production (AEP). Results show that the ANN surrogate achieves the lowest RMSE and MAPE across all scenarios in flow estimation, albeit at a higher computational cost. In WFLO, the TurbOPark-based model produced the highest RANS-validated AEP layouts, despite having lower predictive accuracy, suggesting that optimization complexity influences outcomes. Blockage modeling increased computational cost without improving accuracy.

  • Open Access

    Graph Neural Operator for windfarm wake flow

    by Jens Schøler, Jens Peter, Frederik Peder Weilmann Rasmussen, Julian Quick, Pierre-Eloaun Réthoré

    Wind farm flow simulations are computationally expensive. However, numerous simulations are often required in applications such as wind farm layout optimization or when considering multiple neighboring farms, which motivates the development of data-driven surrogate models. However, most existing approaches rely on classical superposition principles, which constrain their ability to capture nonlinear wake interactions. We propose a novel method that embeds a trainable and scalable superposition principle within a Graph Neural Operator (GNO) architecture. The model consists of two sequential Graph Neural Network (GNN) layers: the first encodes turbine–turbine interactions into a latent representation, while the second combines these latent turbine states to predict the wind speed at a desired location. The GNO is trained on a large dataset of simulated wind farms and achieves a low prediction error, with an RMSE of 0.353 ms−1 and a MAPE of 0.938 % on an unseen test dataset. The GNO accurately identifies regions of strong wake interaction, although the spatial extent of wakes is slightly underestimated in cases with pronounced wake effects. Overall, the proposed GNO represents a significant advancement in data-driven wind farm flow surrogates, introducing a new conceptual framework inspired by established engineering wake modeling principles.