Tomasz Wojcik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tomasz Wojcik has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
- Paul Heinz Mayrhofer
Institute of Material Science and Technology, TU Wien, Vienna, Austria
14 shared publications - Helmut Riedl
Christian Doppler Laboratory for Surface Engineering of high-performance Components, TU Wien, Vienna, Austria
12 shared publications - Rainer Hahn
Christian Doppler Laboratory for Surface Engineering of high-performance Components, TU Wien, Wien, Austria
9 shared publications - Ernst Kozeschnik
Institute of Materials Science and Technology, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria
8 shared publications - Eleni Ntemou
Uppsala University
7 shared publications - Alexander Kirnbauer
Institute of Materials Science and Technology, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria
6 shared publications
Latest Publications
- Open Access
- 15 November 2026
- Published by Elsevier in Materials & Design
- Vol. 272
Coherency, interface-mediated hardening, and thermal stability of NbC/TiB and ZrN/TiB superlattices
- 15 November 2026
- Published by Elsevier in Materials & Design
- Vol. 272
Open AccessCoherency, interface-mediated hardening, and thermal stability of NbC/TiB and ZrN/TiB superlattices
- Open Access
- 17 October 2026
- Published by Elsevier in SSRN Electronic Journal
Interface coherency, defect-mediated hardening, and thermal stability of NbC/TiB and ZrN/TiB superlattices
Refractory-metal carbides, nitrides, and borides combine high hardness with thermal stability, yet limited toughness constrains their use in extreme environments. This study advances a hybrid superlattice concept that pairs crystalline rock-salt templates (NbC or ZrN) with TiBx layers targeted at TiB1 to exploit interface strengthening and coherency-driven defect engineering. The template choice was guided by near-commensurate matching to FeB-type TiB (orthorhombic) via the fcc(111) surface net and to a proposed metastable fcc-TiB polymorph, which closely matches the cubic lattice parameters of ZrN and NbC. Multilayers were grown by DC magnetron sputtering at 600 °C while systematically varying the bilayer period Λ (2.5–100 nm) and the bilayer ratio Γ = ℓtemplate:ℓTiBx (symmetric and asymmetric) to tune interface density, coherency, and the defect landscape. X-ray diffraction (XRD) and transmission electron microscopy (TEM) reveal fcc NbC and ZrN with a slight (111) texture, while TiBx remains largely amorphous. This architecture delivers pronounced superlattice strengthening with hardness peaks near Λ ≈ 10 nm for symmetric bilayer periods, while some asymmetric designs manage to show an increase of ~70% over its constituting components. In-situ high-temperature XRD to 1200 °C in vacuum reveals distinct decomposition pathways governed by TiB reordering and oxide energetics.
- 17 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterface coherency, defect-mediated hardening, and thermal stability of NbC/TiB and ZrN/TiB superlattices
Refractory-metal carbides, nitrides, and borides combine high hardness with thermal stability, yet limited toughness constrains their use in extreme environments. This study advances a hybrid superlattice concept that pairs crystalline rock-salt templates (NbC or ZrN) with TiBx layers targeted at TiB1 to exploit interface strengthening and coherency-driven defect engineering. The template choice was guided by near-commensurate matching to FeB-type TiB (orthorhombic) via the fcc(111) surface net and to a proposed metastable fcc-TiB polymorph, which closely matches the cubic lattice parameters of ZrN and NbC. Multilayers were grown by DC magnetron sputtering at 600 °C while systematically varying the bilayer period Λ (2.5–100 nm) and the bilayer ratio Γ = ℓtemplate:ℓTiBx (symmetric and asymmetric) to tune interface density, coherency, and the defect landscape. X-ray diffraction (XRD) and transmission electron microscopy (TEM) reveal fcc NbC and ZrN with a slight (111) texture, while TiBx remains largely amorphous. This architecture delivers pronounced superlattice strengthening with hardness peaks near Λ ≈ 10 nm for symmetric bilayer periods, while some asymmetric designs manage to show an increase of ~70% over its constituting components. In-situ high-temperature XRD to 1200 °C in vacuum reveals distinct decomposition pathways governed by TiB reordering and oxide energetics.
- Open Access
- 12 April 2026
- Published by Elsevier in Materials & Design
- Vol. 265
Enhancing oxidation resistance and thermal stability of (AlCrNbTaTi)C high-entropy thin films via Si alloying
- 12 April 2026
- Published by Elsevier in Materials & Design
- Vol. 265
Open AccessEnhancing oxidation resistance and thermal stability of (AlCrNbTaTi)C high-entropy thin films via Si alloying
- Open Access
- 7 March 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Temperature-driven self-lubrication in TiB2±x coatings via boron oxide formation
- 7 March 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Open AccessTemperature-driven self-lubrication in TiB2±x coatings via boron oxide formation
- Open Access
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Amorphous AlMgB14 Thin Films with Exceptional Hardness, Toughness, and Thermal Stability
Amorphous AlMgB14 thin films were deposited by DC magnetron sputtering at substrate temperatures between 300 and 600 °C to clarify how deposition temperature controls composition and mechanical performance in boron-rich coatings. All films remain X-ray amorphous. Quantitative online-LASIL analysis reveals increasing boron content (86.1 to 89.3 at%) and progressive magnesium depletion (6.3 to 2.7 at%) with increasing substrate temperature, while aluminium remains nearly constant. These compositional changes lead to pronounced mechanical strengthening: hardness increases from 29.3 ± 1.4 GPa to 32.8 ± 1.2 GPa, indentation modulus from 360 ± 13 GPa to 414 ± 14 GPa, and fracture toughness from 3.7 ± 0.5 MPa√m to 5.2 ± 0.2 MPa√m, reflecting densification and strengthening of the covalent B–B and Al–B bonding network without crystallization. Residual stresses remain moderately compressive (−2 to −3 GPa). The amorphous AlMgB14 network exhibits exceptional thermal stability. Vacuum annealing of coatings deposited at 600 °C increases hardness to 36.7 GPa and indentation modulus to 457 GPa at 850 °C, with minor changes upon annealing up to 1050 °C, while preserving the amorphous structure. These results establish structure–composition–property relationships in amorphous AlMgB14 and demonstrate that boron-rich amorphous architectures achieve high hardness, enhanced fracture toughness, and remarkable thermal stability.
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAmorphous AlMgB14 Thin Films with Exceptional Hardness, Toughness, and Thermal Stability
Amorphous AlMgB14 thin films were deposited by DC magnetron sputtering at substrate temperatures between 300 and 600 °C to clarify how deposition temperature controls composition and mechanical performance in boron-rich coatings. All films remain X-ray amorphous. Quantitative online-LASIL analysis reveals increasing boron content (86.1 to 89.3 at%) and progressive magnesium depletion (6.3 to 2.7 at%) with increasing substrate temperature, while aluminium remains nearly constant. These compositional changes lead to pronounced mechanical strengthening: hardness increases from 29.3 ± 1.4 GPa to 32.8 ± 1.2 GPa, indentation modulus from 360 ± 13 GPa to 414 ± 14 GPa, and fracture toughness from 3.7 ± 0.5 MPa√m to 5.2 ± 0.2 MPa√m, reflecting densification and strengthening of the covalent B–B and Al–B bonding network without crystallization. Residual stresses remain moderately compressive (−2 to −3 GPa). The amorphous AlMgB14 network exhibits exceptional thermal stability. Vacuum annealing of coatings deposited at 600 °C increases hardness to 36.7 GPa and indentation modulus to 457 GPa at 850 °C, with minor changes upon annealing up to 1050 °C, while preserving the amorphous structure. These results establish structure–composition–property relationships in amorphous AlMgB14 and demonstrate that boron-rich amorphous architectures achieve high hardness, enhanced fracture toughness, and remarkable thermal stability.
- Open Access
- 1 March 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Influence of silicon containing phases on the high-temperature fracture behavior of Ti-based diborides
- 1 March 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Open AccessInfluence of silicon containing phases on the high-temperature fracture behavior of Ti-based diborides
- Open Access
- 27 January 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 211
Nitride and amorphous/crystalline multilayers as hydrogen permeation barriers
- 27 January 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 211
Open AccessNitride and amorphous/crystalline multilayers as hydrogen permeation barriers
- Open Access
- 30 December 2025
- Published by Elsevier in Applied Surface Science
- Vol. 727
Amorphous and dual-phase nanocomposite coatings within the Zr-Cu-B system
- 30 December 2025
- Published by Elsevier in Applied Surface Science
- Vol. 727
Open AccessAmorphous and dual-phase nanocomposite coatings within the Zr-Cu-B system
- Open Access
Modeling and Experimental Analysis of the Dislocation Structure Evolution During Deformation of High-Purity Aluminum
In this study, the three internal variables model (3IVM) for dislocation density evolution is further developed into the advanced ABC (advABC) model to simulate the thermo-mechanical behavior of high-purity aluminum (5N). In contrast to conventional FEM packages (e.g., ABAQUS, ANSYS), the present physically based ABC framework directly captures the evolution of the underlying dislocation structure, providing a more coherent prediction of flow behavior. The enhanced model extends the classical formulation by incorporating dislocation annihilation mechanisms and introducing the wall volume fraction as an evolving variable. Simulations are performed over a wide temperature range from −196 °C to 500 °C and at three strain rates of 1, 0.1, and 0.01 s−1. To validate the model, both stress–strain flow curves and microstructural observations obtained via Electron Backscatter Diffraction (EBSD) are used. The simulation results show excellent agreement with experimental data, successfully capturing the temperature- and strain-rate-dependence of the flow behavior, as well as the evolution of dislocation substructures. This work demonstrates the capability of the advABC model to describe both macroscopic and microscopic aspects of deformation. It provides a robust framework for predicting material behavior under complex thermo-mechanical conditions.
Open AccessModeling and Experimental Analysis of the Dislocation Structure Evolution During Deformation of High-Purity Aluminum
In this study, the three internal variables model (3IVM) for dislocation density evolution is further developed into the advanced ABC (advABC) model to simulate the thermo-mechanical behavior of high-purity aluminum (5N). In contrast to conventional FEM packages (e.g., ABAQUS, ANSYS), the present physically based ABC framework directly captures the evolution of the underlying dislocation structure, providing a more coherent prediction of flow behavior. The enhanced model extends the classical formulation by incorporating dislocation annihilation mechanisms and introducing the wall volume fraction as an evolving variable. Simulations are performed over a wide temperature range from −196 °C to 500 °C and at three strain rates of 1, 0.1, and 0.01 s−1. To validate the model, both stress–strain flow curves and microstructural observations obtained via Electron Backscatter Diffraction (EBSD) are used. The simulation results show excellent agreement with experimental data, successfully capturing the temperature- and strain-rate-dependence of the flow behavior, as well as the evolution of dislocation substructures. This work demonstrates the capability of the advABC model to describe both macroscopic and microscopic aspects of deformation. It provides a robust framework for predicting material behavior under complex thermo-mechanical conditions.