Hongjiang Zheng
Research Subjects
Hongjiang Zheng has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Luyao Du
School of Automation, Wuhan University of Technology, Wuhan 430070, China
7 shared publications - Wei Chen
Wuhan University of Technology
5 shared publications - Zhonghui Pei
School of Computer Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
5 shared publications - Bingming Tong
Wuhan University of Technology
2 shared publications - Jing Ji
School of Information Engineering, Wuhan University of Technology, Wuhan, China
2 shared publications - Wei Chai
School of Naval Architecture, Ocean and Energy Power Engineering, Wuhan University of Technology, Wuhan 430063, China
2 shared publications
Latest Publications
- Open Access
- 17 January 2022
- Published by Wiley in Computational Intelligence and Neuroscience
- Vol. 2022, 1-13
A Novel Intelligent Approach to Lane-Change Behavior Prediction for Intelligent and Connected Vehicles
The prediction of lane-change behavior is a challenging issue in intelligent and connected vehicles (ICVs), which can help vehicles predict in advance and change lanes safely. In this paper, a novel intelligent approach, which considering both the driving style-based lane-change environment and the driving trajectory-related parameters of the ICV and surrounding vehicles, is proposed to predict the lane-change behaviors for ICVs. By analyzing the characteristics of the lane-change behavior of the vehicle, a modified dataset for the prediction of lane-change behavior was established based on the Next-Generation Simulation (NGSIM) dataset, which is made up of real vehicle trajectories collected by camera. In the proposed approach, the hidden Markov model (HMM)-based model is designed to judge whether the current environment is suitable for lane change according to the driving environment parameters around the vehicle; then according to the driving state of the vehicle, a learning-based prediction-then-judgment model is proposed and designed to realize the prediction of the ICV’s lane-change behavior. Experiments are implemented by using the modified dataset. From the experimental results, the lane-change probability value on the target lane in the truth of the lane-change behavior calculated by the designed HMM-based model is basically above 0.5, indicating that the model can make a more accurate judgment on the surrounding lane-change environment. The proposed learning-based prediction-then-judgment model has an accuracy of 99.32% for the prediction of lane-change behavior, and the accuracy of the lane-change detection algorithm in the model is 99.56%. The experimental results show that the proposed approach has a good performance in the prediction of lane-change behavior, which could effectively assist ICVs to change lanes safely.
- 17 January 2022
- Published by Wiley in Computational Intelligence and Neuroscience
- Vol. 2022, 1-13
Open AccessA Novel Intelligent Approach to Lane-Change Behavior Prediction for Intelligent and Connected Vehicles
The prediction of lane-change behavior is a challenging issue in intelligent and connected vehicles (ICVs), which can help vehicles predict in advance and change lanes safely. In this paper, a novel intelligent approach, which considering both the driving style-based lane-change environment and the driving trajectory-related parameters of the ICV and surrounding vehicles, is proposed to predict the lane-change behaviors for ICVs. By analyzing the characteristics of the lane-change behavior of the vehicle, a modified dataset for the prediction of lane-change behavior was established based on the Next-Generation Simulation (NGSIM) dataset, which is made up of real vehicle trajectories collected by camera. In the proposed approach, the hidden Markov model (HMM)-based model is designed to judge whether the current environment is suitable for lane change according to the driving environment parameters around the vehicle; then according to the driving state of the vehicle, a learning-based prediction-then-judgment model is proposed and designed to realize the prediction of the ICV’s lane-change behavior. Experiments are implemented by using the modified dataset. From the experimental results, the lane-change probability value on the target lane in the truth of the lane-change behavior calculated by the designed HMM-based model is basically above 0.5, indicating that the model can make a more accurate judgment on the surrounding lane-change environment. The proposed learning-based prediction-then-judgment model has an accuracy of 99.32% for the prediction of lane-change behavior, and the accuracy of the lane-change detection algorithm in the model is 99.56%. The experimental results show that the proposed approach has a good performance in the prediction of lane-change behavior, which could effectively assist ICVs to change lanes safely.
- Open Access
A Fuzzy Drive Strategy for an Intelligent Vehicle Controller Unit Integrated with Connected Data
In order to improve vehicle control safety in intelligent and connected environments, a fuzzy drive control strategy is proposed. Through the fusion of vehicle driving data, an early warning level model was established, and the fuzzy control method was used to obtain the appropriate torque command under the vehicle condition; torque optimization processing was performed according to the different corresponding vehicle following characteristics. The control strategy was tested and verified on an established platform. Based on the experimental results, compared with the traditional drive strategy in one-way front and rear following scenarios, the vehicle avoided excessive opening and closing of the accelerator pedal when the distance between vehicles was close, maintained the correct distance in the following situation, and had better dynamic response when the distance between vehicles was large, indicating that the proposed drive strategy had a better real-time and security performance.
Open AccessA Fuzzy Drive Strategy for an Intelligent Vehicle Controller Unit Integrated with Connected Data
In order to improve vehicle control safety in intelligent and connected environments, a fuzzy drive control strategy is proposed. Through the fusion of vehicle driving data, an early warning level model was established, and the fuzzy control method was used to obtain the appropriate torque command under the vehicle condition; torque optimization processing was performed according to the different corresponding vehicle following characteristics. The control strategy was tested and verified on an established platform. Based on the experimental results, compared with the traditional drive strategy in one-way front and rear following scenarios, the vehicle avoided excessive opening and closing of the accelerator pedal when the distance between vehicles was close, maintained the correct distance in the following situation, and had better dynamic response when the distance between vehicles was large, indicating that the proposed drive strategy had a better real-time and security performance.
- Open Access
Joint Optimization of Multi-Hop Broadcast Protocol and MAC Protocol in Vehicular Ad Hoc Networks
Beacon messages and emergency messages in vehicular ad hoc networks (VANETs) require a lower delay and higher reliability. The optimal MAC protocol can effectively reduce data collision in VANETs communication, thus minimizing delay and improving reliability. In this paper, we propose a Q-learning MAC protocol based on detecting the number of two-hop neighbors. The number of two-hop neighbors in highway scenarios is calculated with very little overhead using the beacon messages and neighbor locations to reduce the impact of hidden nodes. Vehicle nodes are regarded as agents, using Q-learning and beacon messages to train the near-optimal contention window value of the MAC layer under different vehicle densities to reduce the collision probability of beacon messages. Furthermore, based on the contention window value after training, a multi-hop broadcast protocol combined with contention window adjustment for emergency messages in highway scenarios is proposed to reduce forwarding delay and improve forwarding reliability. We use the trained contention window value and the state information of neighboring vehicles to assign an appropriate forwarding waiting time to the forwarding node. Simulation experiments are conducted to evaluate the proposed MAC protocol and multi-hop broadcast protocol and compare them with other related protocols. The results show that our proposed protocols outperform the other related protocols on several different evaluation metrics.
Open AccessJoint Optimization of Multi-Hop Broadcast Protocol and MAC Protocol in Vehicular Ad Hoc Networks
Beacon messages and emergency messages in vehicular ad hoc networks (VANETs) require a lower delay and higher reliability. The optimal MAC protocol can effectively reduce data collision in VANETs communication, thus minimizing delay and improving reliability. In this paper, we propose a Q-learning MAC protocol based on detecting the number of two-hop neighbors. The number of two-hop neighbors in highway scenarios is calculated with very little overhead using the beacon messages and neighbor locations to reduce the impact of hidden nodes. Vehicle nodes are regarded as agents, using Q-learning and beacon messages to train the near-optimal contention window value of the MAC layer under different vehicle densities to reduce the collision probability of beacon messages. Furthermore, based on the contention window value after training, a multi-hop broadcast protocol combined with contention window adjustment for emergency messages in highway scenarios is proposed to reduce forwarding delay and improve forwarding reliability. We use the trained contention window value and the state information of neighboring vehicles to assign an appropriate forwarding waiting time to the forwarding node. Simulation experiments are conducted to evaluate the proposed MAC protocol and multi-hop broadcast protocol and compare them with other related protocols. The results show that our proposed protocols outperform the other related protocols on several different evaluation metrics.
- 21 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 697-701
Design of Data Acquisition System with High Precision for Lane-change Behavior Detection Applied in Intelligent and Connected Vehicles
V2X technology enables the intelligent and connected vehicles (ICVs) to communicate with surrounding vehicles in real time. In order to obtain the data related to the lane-change behavior of the ICVs and its surrounding vehicles, a positioning data acquisition system with high precision is designed, including hardware and software. In the designed system, the high-precision position, velocity, acceleration and direction angle data are acquired based on the Sinan navigation high-precision receiver M100, the MK5 OBU of Cohda Wireless can be used to realize real-time communication of information, and the main controller is designed based on STM32, completes the collection and transmission of high-precision positioning information, and stores it in the SD card after time synchronization. The relevant data was collected by installing the designed system on the test vehicle, and the lane-changing behavior was manually marked and time stamped. The analysis of experimental results shows that the designed system can basically achieve lane-level accuracy in urban open road scenes, and accurately describe the trajectory of vehicle lane-change behavior.
- 21 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 697-701
Design of Data Acquisition System with High Precision for Lane-change Behavior Detection Applied in Intelligent and Connected Vehicles
V2X technology enables the intelligent and connected vehicles (ICVs) to communicate with surrounding vehicles in real time. In order to obtain the data related to the lane-change behavior of the ICVs and its surrounding vehicles, a positioning data acquisition system with high precision is designed, including hardware and software. In the designed system, the high-precision position, velocity, acceleration and direction angle data are acquired based on the Sinan navigation high-precision receiver M100, the MK5 OBU of Cohda Wireless can be used to realize real-time communication of information, and the main controller is designed based on STM32, completes the collection and transmission of high-precision positioning information, and stores it in the SD card after time synchronization. The relevant data was collected by installing the designed system on the test vehicle, and the lane-changing behavior was manually marked and time stamped. The analysis of experimental results shows that the designed system can basically achieve lane-level accuracy in urban open road scenes, and accurately describe the trajectory of vehicle lane-change behavior.
- 23 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 546-552
MAC Contention Protocol Based on Reinforcement Learning for IoV Communication Environments
The Medium Access Control (MAC) layer contention protocol is closely related to the performance of network throughput, end-to-end delay, and access fairness on the Internet of Vehicles (IoV) communication. Based on the MAC layer protocol of the Wireless Access in Vehicular Environments (WAVE) standard system, this paper proposes a MAC layer contention window adaptive adjustment policy using Reinforcement Learning. Through the detection of the number of neighbors and the application of the Q-Learning algorithm, the vehicle can adjust the contention window according to the number of nodes competing for the same channel to adapt to the changing environments of the IoV. Three different MAC protocols are simulated and analyzed under the Vehicle in Network Simulation (Veins) platform. The results show that the proposed MAC protocol based on neighbor detection and Q-Learning performs better than WAVE MAC protocol and general MAC protocol based on Q-Learning.
- 23 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 546-552
MAC Contention Protocol Based on Reinforcement Learning for IoV Communication Environments
The Medium Access Control (MAC) layer contention protocol is closely related to the performance of network throughput, end-to-end delay, and access fairness on the Internet of Vehicles (IoV) communication. Based on the MAC layer protocol of the Wireless Access in Vehicular Environments (WAVE) standard system, this paper proposes a MAC layer contention window adaptive adjustment policy using Reinforcement Learning. Through the detection of the number of neighbors and the application of the Q-Learning algorithm, the vehicle can adjust the contention window according to the number of nodes competing for the same channel to adapt to the changing environments of the IoV. Three different MAC protocols are simulated and analyzed under the Vehicle in Network Simulation (Veins) platform. The results show that the proposed MAC protocol based on neighbor detection and Q-Learning performs better than WAVE MAC protocol and general MAC protocol based on Q-Learning.
- Open Access
- 10 June 2020
- Published by Hindawi Limited in Mobile Information Systems
- Vol. 2020, 1-11
Optimization of Maximum Routing Hop Count Parameter Based on Vehicle Density for VANET
Vehicular Ad Hoc Network (VANET) is the basic technology of intelligent transportation systems for providing reliable and real-time communications between vehicles and vehicles or roadside units. In order to improve the communication quality of VANET, this paper studies the effects of different maximum routing hop count parameters on the performance of the network under different vehicle densities. We establish the mathematical models of node connectivity probability and the packet delivery ratio by using the Poisson distribution model. And the maximum routing hop count selection algorithm (MRHSA) is proposed based on the theoretical model established in the paper. The simulation experiments and statistical analysis on packet delivery ratio, throughput, and end-to-end delay are performed under the straight road and urban road scenes, supported by the Vehicle in Network Simulation (Veins). The results show that the maximum routing hop count parameter is an important impact factor on the communication quality of the network. It is found that MRSHA proposed in this paper can improve the packet delivery ratio by about 9.1% at most in straight road scenarios, which indicates that MRHSA will contribute to the improvement of the communication quality of VANET.
- 10 June 2020
- Published by Hindawi Limited in Mobile Information Systems
- Vol. 2020, 1-11
Open AccessOptimization of Maximum Routing Hop Count Parameter Based on Vehicle Density for VANET
Vehicular Ad Hoc Network (VANET) is the basic technology of intelligent transportation systems for providing reliable and real-time communications between vehicles and vehicles or roadside units. In order to improve the communication quality of VANET, this paper studies the effects of different maximum routing hop count parameters on the performance of the network under different vehicle densities. We establish the mathematical models of node connectivity probability and the packet delivery ratio by using the Poisson distribution model. And the maximum routing hop count selection algorithm (MRHSA) is proposed based on the theoretical model established in the paper. The simulation experiments and statistical analysis on packet delivery ratio, throughput, and end-to-end delay are performed under the straight road and urban road scenes, supported by the Vehicle in Network Simulation (Veins). The results show that the maximum routing hop count parameter is an important impact factor on the communication quality of the network. It is found that MRSHA proposed in this paper can improve the packet delivery ratio by about 9.1% at most in straight road scenarios, which indicates that MRHSA will contribute to the improvement of the communication quality of VANET.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Beam Design for Beam Training Based Millimeter Wave V2I Communications
In order to achieve high-quality entertainment services and large-capacity sensor sharing, it is imperative to improve the throughput of V2I communication systems. Millimeter wave communication is a promising technology, which is generally combined with beamforming techniques. When it comes to beam design, we need to focus on the tradeoff between system throughput and alignment overhead. However, conventional optimization schemes are limited by uniform beamwidth design. Considering the characteristics of V2I communication on the highway, this paper proposes a non-uniform beamwidth design idea. Firstly, an average throughput model based on beam training is established. Then, a recursive algorithm is used to achieve non-uniform beamwidth optimization. Finally, the simulation results prove that the non-uniform beamwidth scheme can significantly improve the throughput of the V2I system.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Beam Design for Beam Training Based Millimeter Wave V2I Communications
In order to achieve high-quality entertainment services and large-capacity sensor sharing, it is imperative to improve the throughput of V2I communication systems. Millimeter wave communication is a promising technology, which is generally combined with beamforming techniques. When it comes to beam design, we need to focus on the tradeoff between system throughput and alignment overhead. However, conventional optimization schemes are limited by uniform beamwidth design. Considering the characteristics of V2I communication on the highway, this paper proposes a non-uniform beamwidth design idea. Firstly, an average throughput model based on beam training is established. Then, a recursive algorithm is used to achieve non-uniform beamwidth optimization. Finally, the simulation results prove that the non-uniform beamwidth scheme can significantly improve the throughput of the V2I system.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 383-387
OBU Design and Test Analysis with Centimeter-Level Positioning for LTE-V2X
As an important part of the Internet of vehicles (IoV) system, many research team have been working on the development of On-Board Unit (OBU) with high precision. In this paper, a new centimeter-level positioning OBU based on LTE-V, dead reckoning (DR) and network real time kinematic (RTK) positioning is designed. The hardware and software design of the terminal are introduced in detail. And the performance indexes, including delay, packet loss rate, static and dynamic positioning accuracy of the terminal, are measured in two scenarios. The experimental results show that the dynamic horizontal positioning error is less than 35mm, which is relatively high precision in IoV system.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 383-387
OBU Design and Test Analysis with Centimeter-Level Positioning for LTE-V2X
As an important part of the Internet of vehicles (IoV) system, many research team have been working on the development of On-Board Unit (OBU) with high precision. In this paper, a new centimeter-level positioning OBU based on LTE-V, dead reckoning (DR) and network real time kinematic (RTK) positioning is designed. The hardware and software design of the terminal are introduced in detail. And the performance indexes, including delay, packet loss rate, static and dynamic positioning accuracy of the terminal, are measured in two scenarios. The experimental results show that the dynamic horizontal positioning error is less than 35mm, which is relatively high precision in IoV system.