Carmine Caponio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Carmine Caponio has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Davide Tavernini
School of Engineering, University of Surrey, Guildford, U.K.
3 shared publications - Aldo Sorniotti
Politecnico di Torino
2 shared publications Ahu Ece Hartavi Karci
School of Engineering, University of Surrey, Guildford, U.K.
1 shared publication- Alessandro Scamarcio
Centre for Automotive Engineering, University of Surrey, Guildford, U.K.
1 shared publication - Basilio Lenzo
University of Padova
1 shared publication - Gaetano Tavolo
Centre for Automotive Engineering, University of Surrey, Guildford, U.K.
1 shared publication
Latest Publications
- Open Access
- 28 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 202893-202905
A Reinforcement Learning Motor Torque Modulation Approach for Enhancing Occupants Comfort on Electric Vehicles
In recent years, the automotive industry has undergone a rapid evolution, with increasing interest in electric vehicles (EVs). In this context, improving driving comfort (beyond the reduction of internal-combustion-engine related vibrations) and vehicle safety have become crucial factors for the widespread adoption of EVs. This can be achieved thank to the easier modulation of the individual propulsion torques on both axles, which can be exploited for enhancing stability/agility, but also to improve the reaction of the vehicle to external factors, such as road asperities. In particular, longitudinal vehicle vibrations, although often overlooked in comparison to vertical vibrations, have a significant impact on driving comfort. This paper devises a Reinforcement Learning (RL) torque-correction controller aimed at reducing longitudinal vibrations. The proposed controller, based on the Deep Deterministic Policy Gradient (DDPG) algorithm, has been implemented on a validated vehicle model for both the front and rear axles, modulating the torque requested by the driver in response to road unevenness or obstacles. The agent was trained/tested in simulations on various road scenarios, including a variety of obstacles as well as real road profiles sampled experimentally. The results show that the proposed RL controller offers performance comparable to that of a state-of-the-art Nonlinear Model Predictive Controller (NMPC) in terms of vibration reduction, while maintaining a much lower computational load, making it potentially suitable for real-time applications in road vehicles equipped with production automotive-graded ECUs. In this proof-of-concept study, the controller was implemented on a dSPACE MicroAutoBox III device, showing a turnaround time < 1 ms compared with the 6−7 ms required by the considered real-time capable NMPC, on the same unit. Robustness tests were also carried out to assess the controller’s response against different road conditions, road detection accuracy and vehicle parameters, confirming the validity of the proposed approach.
- 28 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 202893-202905
Open AccessA Reinforcement Learning Motor Torque Modulation Approach for Enhancing Occupants Comfort on Electric Vehicles
In recent years, the automotive industry has undergone a rapid evolution, with increasing interest in electric vehicles (EVs). In this context, improving driving comfort (beyond the reduction of internal-combustion-engine related vibrations) and vehicle safety have become crucial factors for the widespread adoption of EVs. This can be achieved thank to the easier modulation of the individual propulsion torques on both axles, which can be exploited for enhancing stability/agility, but also to improve the reaction of the vehicle to external factors, such as road asperities. In particular, longitudinal vehicle vibrations, although often overlooked in comparison to vertical vibrations, have a significant impact on driving comfort. This paper devises a Reinforcement Learning (RL) torque-correction controller aimed at reducing longitudinal vibrations. The proposed controller, based on the Deep Deterministic Policy Gradient (DDPG) algorithm, has been implemented on a validated vehicle model for both the front and rear axles, modulating the torque requested by the driver in response to road unevenness or obstacles. The agent was trained/tested in simulations on various road scenarios, including a variety of obstacles as well as real road profiles sampled experimentally. The results show that the proposed RL controller offers performance comparable to that of a state-of-the-art Nonlinear Model Predictive Controller (NMPC) in terms of vibration reduction, while maintaining a much lower computational load, making it potentially suitable for real-time applications in road vehicles equipped with production automotive-graded ECUs. In this proof-of-concept study, the controller was implemented on a dSPACE MicroAutoBox III device, showing a turnaround time < 1 ms compared with the 6−7 ms required by the considered real-time capable NMPC, on the same unit. Robustness tests were also carried out to assess the controller’s response against different road conditions, road detection accuracy and vehicle parameters, confirming the validity of the proposed approach.
- Open Access
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 106540-106560
Nonlinear Model Predictive Yaw Moment Control Through Electric Axle and Friction Brake Torque Distribution
A broad literature deals with torque-vectoring (TV) algorithms based on direct yaw moment control (DYC), which continuously generate longitudinal tire forces that are different on the left and right vehicle sides. Such set-ups enable desirable yaw rate and sideslip responses in normal and extreme driving conditions. However, they imply two electric powertrains per axle, or controllable differentials, and therefore the related controllers are not applicable to typical production electric vehicle layouts with a single centralized electric machine and open differential per axle. Nevertheless, in proximity of the limit of handling, the cornering response of conventional all-wheel-drive electric vehicles with one motor per axle can benefit from front-to-rear axle torque-vectoring (ATV), which, by controlling the longitudinal force distribution between the front and rear axles, indirectly modifies the yaw moment contribution due to the lateral tire forces. Only a few studies exploit this option, with limited coverage, e.g., without considering the energy efficiency aspects and the electronic stability control (ESC) function actuating the friction brakes. To address the gap, this paper presents real-time capable nonlinear model predictive controllers (NMPCs) for ATV and ESC, targeting: i) energy consumption reduction in normal driving, through powertrain and tire slip power loss limitation; and ii) yaw rate, sideslip angle and wheel slip control at the limit of handling, by considering the trade-off between powertrain and friction brake actuation. The performance is assessed through simulations with a validated vehicle model, and experiments on a vehicle demonstrator. With respect to benchmarking rule-based controllers, the results show that the NMPCs bring significant reductions of the yaw rate errors and friction brake power losses, while increasing the exit speed in acceleration-during-cornering conditions.
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 106540-106560
Open AccessNonlinear Model Predictive Yaw Moment Control Through Electric Axle and Friction Brake Torque Distribution
A broad literature deals with torque-vectoring (TV) algorithms based on direct yaw moment control (DYC), which continuously generate longitudinal tire forces that are different on the left and right vehicle sides. Such set-ups enable desirable yaw rate and sideslip responses in normal and extreme driving conditions. However, they imply two electric powertrains per axle, or controllable differentials, and therefore the related controllers are not applicable to typical production electric vehicle layouts with a single centralized electric machine and open differential per axle. Nevertheless, in proximity of the limit of handling, the cornering response of conventional all-wheel-drive electric vehicles with one motor per axle can benefit from front-to-rear axle torque-vectoring (ATV), which, by controlling the longitudinal force distribution between the front and rear axles, indirectly modifies the yaw moment contribution due to the lateral tire forces. Only a few studies exploit this option, with limited coverage, e.g., without considering the energy efficiency aspects and the electronic stability control (ESC) function actuating the friction brakes. To address the gap, this paper presents real-time capable nonlinear model predictive controllers (NMPCs) for ATV and ESC, targeting: i) energy consumption reduction in normal driving, through powertrain and tire slip power loss limitation; and ii) yaw rate, sideslip angle and wheel slip control at the limit of handling, by considering the trade-off between powertrain and friction brake actuation. The performance is assessed through simulations with a validated vehicle model, and experiments on a vehicle demonstrator. With respect to benchmarking rule-based controllers, the results show that the NMPCs bring significant reductions of the yaw rate errors and friction brake power losses, while increasing the exit speed in acceleration-during-cornering conditions.
- Open Access
- 18 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (6) , 7221-7239
Predictive Anti-Jerk and Traction Control for V2X Connected Electric Vehicles With Central Motor and Open Differential
V2X connectivity and powertrain electrification are emerging trends in the automotive sector, which enable the implementation of new control solutions. Most of the production electric vehicles have centralized powertrain architectures consisting of a single central on-board motor, a single-speed transmission, an open differential, half-shafts, and constant velocity joints. The torsional drivetrain dynamics and wheel dynamics are influenced by the open differential, especially in split- scenarios, i.e., with different tire-road friction coefficients on the two wheels of the same axle, and are attenuated by the so-called anti-jerk controllers. Although a rather extensive literature discusses traction control formulations for individual wheel slip control, there is a knowledge gap on: a) model based traction controllers for centralized powertrains; and b) traction controllers using the preview of the expected tire-road friction condition ahead, e.g., obtained through V2X, for enhancing the wheel slip tracking performance. This study presents nonlinear model predictive control formulations for traction control and anti-jerk control in electric powertrains with central motor and open differential, and benefitting from the preview of the tire-road friction level. The simulation results in straight line and cornering conditions, obtained with an experimentally validated vehicle model, as well as the proof-of-concept experiments on an electric quadricycle prototype, highlight the benefits of the novel controllers.
- 18 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (6) , 7221-7239
Open AccessPredictive Anti-Jerk and Traction Control for V2X Connected Electric Vehicles With Central Motor and Open Differential
V2X connectivity and powertrain electrification are emerging trends in the automotive sector, which enable the implementation of new control solutions. Most of the production electric vehicles have centralized powertrain architectures consisting of a single central on-board motor, a single-speed transmission, an open differential, half-shafts, and constant velocity joints. The torsional drivetrain dynamics and wheel dynamics are influenced by the open differential, especially in split- scenarios, i.e., with different tire-road friction coefficients on the two wheels of the same axle, and are attenuated by the so-called anti-jerk controllers. Although a rather extensive literature discusses traction control formulations for individual wheel slip control, there is a knowledge gap on: a) model based traction controllers for centralized powertrains; and b) traction controllers using the preview of the expected tire-road friction condition ahead, e.g., obtained through V2X, for enhancing the wheel slip tracking performance. This study presents nonlinear model predictive control formulations for traction control and anti-jerk control in electric powertrains with central motor and open differential, and benefitting from the preview of the tire-road friction level. The simulation results in straight line and cornering conditions, obtained with an experimentally validated vehicle model, as well as the proof-of-concept experiments on an electric quadricycle prototype, highlight the benefits of the novel controllers.