Yassin Mohamed Shuaib
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yassin Mohamed Shuaib has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Abdul Khadar Shaik
B.S. Abdur Rahman Crescent Institute of Science and Technology
3 shared publications - Vijayakumar Arun
Mohan Babu University
2 shared publications - Abdul Quawi
B. S. Abdur Rahman Crescent Institute of Science and Technology
1 shared publication - Jammy Ramesh Rahul
Department of Electrical Engineering, National Institute of Technology, Warangal, India
1 shared publication K. Shafeeque Ahmed
B. S. Abdur Rahman Crescent Institute of Science and Technology, A Deemed To Be University, Chennai, Tamil Nadu, India
1 shared publicationM. Manikandan
Jyothishmathi Institute of Technology and Science, Karimnagar, Telangana, India
1 shared publication
Latest Publications
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (6) , 065319
A high-performance 9-level multilevel inverter using switched capacitors with enhanced voltage boost
Multilevel inverters (MLI) are essential in renewable energy and electric vehicle applications for producing high quality, low distortion AC output while efficiently utilizing low voltage DC sources. However, existing MLI topologies often require a large number of switching devices and capacitors, which limit voltage gain, increase cost and complexity. This work presents a novel nine-level quadruple boost switched capacitor multilevel inverter (NLQB SCMLI) that focuses on reducing the power component count and enhancing voltage boosting capability, self-balancing, and efficiency. The proposed topology employs only 10 switches and 2 self-balancing capacitors, integrates a multicarrier pulse width modulation (MCPWM) scheme, and is validated through comprehensive MATLAB/Simulink simulations, PLECS based loss/efficiency modelling, and experimental hardware testing. Results confirm a fourfold voltage boost, delivering 400 V peak AC from a 100 V DC input, alongside inherent capacitor voltage self-balancing, without auxiliary circuits. The maximum simulated efficiency of 96.45% is achieved and maintains output voltage total harmonic distortion (THD) below 6.25% and 7.56% in simulation and experimental studies respectively. The proposed inverter demonstrates a superior cost function per output level, and a competitive total standing voltage compared to state-of-the-art designs, providing a compact, cost effective solution well suited for photovoltaic and electric vehicle power systems.
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (6) , 065319
A high-performance 9-level multilevel inverter using switched capacitors with enhanced voltage boost
Multilevel inverters (MLI) are essential in renewable energy and electric vehicle applications for producing high quality, low distortion AC output while efficiently utilizing low voltage DC sources. However, existing MLI topologies often require a large number of switching devices and capacitors, which limit voltage gain, increase cost and complexity. This work presents a novel nine-level quadruple boost switched capacitor multilevel inverter (NLQB SCMLI) that focuses on reducing the power component count and enhancing voltage boosting capability, self-balancing, and efficiency. The proposed topology employs only 10 switches and 2 self-balancing capacitors, integrates a multicarrier pulse width modulation (MCPWM) scheme, and is validated through comprehensive MATLAB/Simulink simulations, PLECS based loss/efficiency modelling, and experimental hardware testing. Results confirm a fourfold voltage boost, delivering 400 V peak AC from a 100 V DC input, alongside inherent capacitor voltage self-balancing, without auxiliary circuits. The maximum simulated efficiency of 96.45% is achieved and maintains output voltage total harmonic distortion (THD) below 6.25% and 7.56% in simulation and experimental studies respectively. The proposed inverter demonstrates a superior cost function per output level, and a competitive total standing voltage compared to state-of-the-art designs, providing a compact, cost effective solution well suited for photovoltaic and electric vehicle power systems.
- Open Access
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (2) , 982-997
Unlocking the potential of multilevel inverters: a comprehensive review
The energy usage of the electricity system increased dramatically during the last few years as a result of the rise in consumers and businesses. It resulted in large-scale traditional energy generation, causing an increase in global emissions. As a result, the perforation of sources that are renewable inside electrical networks has greatly grown. Solar power systems (PS) have grown into the most prominent sources because of their tremendous potential; hence, global installed solar power capability has expanded beyond more than 635 gigawatts (GW), representing about 2% of the world’s energy consumption. Multilevel inverters (MLI) are now on top of two-level inverters due to their ability to deliver diminished electromagnetic interference (EMI) and elevated capability. This study examines MLIs in terms of categorization, development, and problems, as well as practical advice for use in renewable energy systems (RES). This review also emphasizes the significance and development of an improved multilevel inverter. In summary, this study focuses on the usage of multilayer inverters in PV systems to stimulate and assist society in developing efficient, cost-effective inverters with integrated capacities of those converters described in the survey.
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (2) , 982-997
Open AccessUnlocking the potential of multilevel inverters: a comprehensive review
The energy usage of the electricity system increased dramatically during the last few years as a result of the rise in consumers and businesses. It resulted in large-scale traditional energy generation, causing an increase in global emissions. As a result, the perforation of sources that are renewable inside electrical networks has greatly grown. Solar power systems (PS) have grown into the most prominent sources because of their tremendous potential; hence, global installed solar power capability has expanded beyond more than 635 gigawatts (GW), representing about 2% of the world’s energy consumption. Multilevel inverters (MLI) are now on top of two-level inverters due to their ability to deliver diminished electromagnetic interference (EMI) and elevated capability. This study examines MLIs in terms of categorization, development, and problems, as well as practical advice for use in renewable energy systems (RES). This review also emphasizes the significance and development of an improved multilevel inverter. In summary, this study focuses on the usage of multilayer inverters in PV systems to stimulate and assist society in developing efficient, cost-effective inverters with integrated capacities of those converters described in the survey.
- Open Access
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (3) , 1450-1462
Design and simulation of a double boost switched capacitor multilevel inverter
This article presents an innovative boost inverter configuration that produces a nine-level double voltage augmentation waveform. A significant drawback of conventional multilevel inverters (MLIs) lies in their dependence on conversion for elevating the voltage, particularly applied in conjunction with renewable energy sources. The proposed methodology, characterized by its double voltage boosting capacity, mitigates this challenge by automatically enhancing the input voltage. Switched-capacitor multilevel inverters (SCMLIs) represent a prevalent category within the realm of MLIs. This paper presents a double boost switched capacitor inverter (DB-SCI) designed to address critical issues involving the increased use of semiconductor switches, DC sources, and capacitors. The proposed DB-SCI achieves a nine-level resultant voltage utilizing a single DC source, 8 switches, and 3 capacitors. It can amplify the output voltage with a gain of two. Moreover, the DB-SCI employs a level-shifted pulse width modulation (PWM) approach to augment the resultant voltage and enhance the output voltage's quality. The article assesses the effectiveness and feasibility of the DB-SCI under various modulation indices using MATLAB/Simulink. The comparison study of MLI topologies is presented.
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (3) , 1450-1462
Open AccessDesign and simulation of a double boost switched capacitor multilevel inverter
This article presents an innovative boost inverter configuration that produces a nine-level double voltage augmentation waveform. A significant drawback of conventional multilevel inverters (MLIs) lies in their dependence on conversion for elevating the voltage, particularly applied in conjunction with renewable energy sources. The proposed methodology, characterized by its double voltage boosting capacity, mitigates this challenge by automatically enhancing the input voltage. Switched-capacitor multilevel inverters (SCMLIs) represent a prevalent category within the realm of MLIs. This paper presents a double boost switched capacitor inverter (DB-SCI) designed to address critical issues involving the increased use of semiconductor switches, DC sources, and capacitors. The proposed DB-SCI achieves a nine-level resultant voltage utilizing a single DC source, 8 switches, and 3 capacitors. It can amplify the output voltage with a gain of two. Moreover, the DB-SCI employs a level-shifted pulse width modulation (PWM) approach to augment the resultant voltage and enhance the output voltage's quality. The article assesses the effectiveness and feasibility of the DB-SCI under various modulation indices using MATLAB/Simulink. The comparison study of MLI topologies is presented.
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1851-1870
CNN based fault event classification and power quality enhancement in hybrid power system
A resilient approach is presented in this study for detecting and classifying faults for power distribution systems integrating renewable energy sources (RES). Combining discrete wavelet transform (DWT) and convolutional neural network (CNN). The suggested framework addresses the challenges of RES intermittency and kinetic energy insufficiency. The recommended methodology is evaluated in a MATLAB platform, featuring a power distribution system with photovoltaic (PV) and wind energy conversion system (WECS), stabilized by a boost converter and cascaded fuzzy logic controller (CFLC) based maximum power point tracking (MPPT) for PV and a PI controller for WECS. Comparative analyses demonstrate the superior performance of the CNN classifier with an accuracy of 96.33%, outshining existing classifiers, including ANN. Furthermore, under various fault conditions, the CNN consistently achieves high accuracy, with 98% for Islanding, 95% for line-to-ground fault, and 96% for line-to-line fault. The proposed approach exhibits excellent computational efficiency, with a training time of 10.5 hours, inference speed of 5 milliseconds, and resource utilization of 85%, emphasizing its suitability for instantaneous fault identification in power systems.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1851-1870
Open AccessCNN based fault event classification and power quality enhancement in hybrid power system
A resilient approach is presented in this study for detecting and classifying faults for power distribution systems integrating renewable energy sources (RES). Combining discrete wavelet transform (DWT) and convolutional neural network (CNN). The suggested framework addresses the challenges of RES intermittency and kinetic energy insufficiency. The recommended methodology is evaluated in a MATLAB platform, featuring a power distribution system with photovoltaic (PV) and wind energy conversion system (WECS), stabilized by a boost converter and cascaded fuzzy logic controller (CFLC) based maximum power point tracking (MPPT) for PV and a PI controller for WECS. Comparative analyses demonstrate the superior performance of the CNN classifier with an accuracy of 96.33%, outshining existing classifiers, including ANN. Furthermore, under various fault conditions, the CNN consistently achieves high accuracy, with 98% for Islanding, 95% for line-to-ground fault, and 96% for line-to-line fault. The proposed approach exhibits excellent computational efficiency, with a training time of 10.5 hours, inference speed of 5 milliseconds, and resource utilization of 85%, emphasizing its suitability for instantaneous fault identification in power systems.
- Open Access
- 17 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 155380-155392
Power Quality Enhancement Using Dynamic Voltage Restorer (DVR)-Based Predictive Space Vector Transformation (PSVT) With Proportional Resonant (PR)-Controller
In the power distribution system, the Power Quality (PQ) is disturbed by the voltage sag and swells. The Dynamic Voltage Restorer (DVR) is used to enhance various PQ problems like voltage sag, swells, and Harmonics. The previous Intrinsic Space Vector Transformation (ISVT) control techniques with DVR system, to compensate the power quality issue. It produced a steady-state error, low efficiency, and high THD. The SMES based DVR has provided excellent results in overcoming these issues. The energy is stored by DVR through a storage element, which takes alternate energy from a Solar PV cell. The Maximum Power Point Tracking (MPPT) based P&O algorithm is implemented to equalize the solar power. The Voltage Source Inverter (VSI) generates the reactive power, which has to be compensated with the help of Pulse Width Modulation (PWM) and the feedback control loop are essential to enhance the injection of reactive power to the line. Due to this reason, a proposed Predictive Space Vector Transformation (PSVT) control-based DVR is implemented. It analyzes the variation of power on the distribution side and generates the proper feedback control to the inverter systems. In the instant of voltage injection to the line with the help of DVR, the phase angle mismatch happens which is not synchronized reactive power to the grid. Due to the non-synchronization of reactive power, more harmonic distortion is generated. A Proportional Resonant (PR) controller is introduced, which is Proportional Resonant (PR) current controller. The current injected by the inverter into the grid in phase with the grid voltage maintain constant with unity power factor. The PR controller design is cascaded with a harmonic compensator to mitigate low order odd harmonic components present in the output current of VSI and minimize the total harmonic distortion (THD). The performance of the proposed is evaluated using MATLAB 2017b software.
- 17 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 155380-155392
Open AccessPower Quality Enhancement Using Dynamic Voltage Restorer (DVR)-Based Predictive Space Vector Transformation (PSVT) With Proportional Resonant (PR)-Controller
In the power distribution system, the Power Quality (PQ) is disturbed by the voltage sag and swells. The Dynamic Voltage Restorer (DVR) is used to enhance various PQ problems like voltage sag, swells, and Harmonics. The previous Intrinsic Space Vector Transformation (ISVT) control techniques with DVR system, to compensate the power quality issue. It produced a steady-state error, low efficiency, and high THD. The SMES based DVR has provided excellent results in overcoming these issues. The energy is stored by DVR through a storage element, which takes alternate energy from a Solar PV cell. The Maximum Power Point Tracking (MPPT) based P&O algorithm is implemented to equalize the solar power. The Voltage Source Inverter (VSI) generates the reactive power, which has to be compensated with the help of Pulse Width Modulation (PWM) and the feedback control loop are essential to enhance the injection of reactive power to the line. Due to this reason, a proposed Predictive Space Vector Transformation (PSVT) control-based DVR is implemented. It analyzes the variation of power on the distribution side and generates the proper feedback control to the inverter systems. In the instant of voltage injection to the line with the help of DVR, the phase angle mismatch happens which is not synchronized reactive power to the grid. Due to the non-synchronization of reactive power, more harmonic distortion is generated. A Proportional Resonant (PR) controller is introduced, which is Proportional Resonant (PR) current controller. The current injected by the inverter into the grid in phase with the grid voltage maintain constant with unity power factor. The PR controller design is cascaded with a harmonic compensator to mitigate low order odd harmonic components present in the output current of VSI and minimize the total harmonic distortion (THD). The performance of the proposed is evaluated using MATLAB 2017b software.