David Mast
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Mast has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Amjad S. Almansour
NASA Glenn Research Center, Cleveland, OH 44135, USA
1 shared publication - Arun Kamath
Department of Chemical and Biomolecular Engineering, University of California Berkeley, Berkeley, CA 94720, USA
1 shared publication - Ashley Kubley
University of Cincinnati
1 shared publication - Ayush Arun Raut
Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, OH 45221, USA
1 shared publication - Brett David Karsten
Department of Chemistry, University of Cincinnati, Cincinnati, OH 45221, USA
1 shared publication - Diana Santiago
NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH, 44135, USA
1 shared publication
Latest Publications
- Open Access
Lightweight Copper–Carbon Nanotube Core–Shell Composite Fiber for Power Cable Application
The substitution of traditional copper power transmission cables with lightweight copper–carbon nanotube (Cu–CNT) composite fibers is critical for reducing the weight, fuel consumption, and CO2 emissions of automobiles and aircrafts. Such a replacement will also allow for lowering the transmission power loss in copper cables resulting in a decrease in coal and gas consumption, and ultimately diminishing the carbon footprint. In this work, we created a lightweight Cu–CNT composite fiber through a multistep scalable process, including spinning, densification, functionalization, and double-layer copper deposition. The characterization and testing of the fabricated fiber included surface morphology, electrical conductivity, mechanical strength, crystallinity, and ampacity (current density). The electrical conductivity of the resultant composite fiber was measured to be 0.5 × 106 S/m with an ampacity of 0.18 × 105 A/cm2. The copper-coated CNT fibers were 16 times lighter and 2.7 times stronger than copper wire, as they revealed a gravimetric density of 0.4 g/cm3 and a mechanical strength of 0.68 GPa, suggesting a great potential in future applications as lightweight power transmission cables.
Open AccessLightweight Copper–Carbon Nanotube Core–Shell Composite Fiber for Power Cable Application
The substitution of traditional copper power transmission cables with lightweight copper–carbon nanotube (Cu–CNT) composite fibers is critical for reducing the weight, fuel consumption, and CO2 emissions of automobiles and aircrafts. Such a replacement will also allow for lowering the transmission power loss in copper cables resulting in a decrease in coal and gas consumption, and ultimately diminishing the carbon footprint. In this work, we created a lightweight Cu–CNT composite fiber through a multistep scalable process, including spinning, densification, functionalization, and double-layer copper deposition. The characterization and testing of the fabricated fiber included surface morphology, electrical conductivity, mechanical strength, crystallinity, and ampacity (current density). The electrical conductivity of the resultant composite fiber was measured to be 0.5 × 106 S/m with an ampacity of 0.18 × 105 A/cm2. The copper-coated CNT fibers were 16 times lighter and 2.7 times stronger than copper wire, as they revealed a gravimetric density of 0.4 g/cm3 and a mechanical strength of 0.68 GPa, suggesting a great potential in future applications as lightweight power transmission cables.
- Open Access
Effect of Dipole Interactions on Blocking Temperature and Relaxation Dynamics of Superparamagnetic Iron-Oxide (Fe3O4) Nanoparticle Systems
The effects of dipole interactions on magnetic nanoparticle magnetization and relaxation dynamics were investigated using five nanoparticle (NP) systems with different surfactants, carrier liquids, size distributions, inter-particle spacing, and NP confinement. Dipole interactions were found to play a crucial role in modifying the blocking temperature behavior of the superparamagnetic nanoparticles, where stronger interactions were found to increase the blocking temperatures. Consequently, the blocking temperature of a densely packed nanoparticle system with stronger dipolar interactions was found to be substantially higher than those of the discrete nanoparticle systems. The frequencies of the dominant relaxation mechanisms were determined by magnetic susceptibility measurements in the frequency range of 100 Hz–7 GHz. The loss mechanisms were identified in terms of Brownian relaxation (1 kHz–10 kHz) and gyromagnetic resonance of Fe3O4 (~1.12 GHz). It was observed that the microwave absorption of the Fe3O4 nanoparticles depend on the local environment surrounding the NPs, as well as the long-range dipole–dipole interactions. These significant findings will be profoundly important in magnetic hyperthermia medical therapeutics and energy applications.
Open AccessEffect of Dipole Interactions on Blocking Temperature and Relaxation Dynamics of Superparamagnetic Iron-Oxide (Fe3O4) Nanoparticle Systems
The effects of dipole interactions on magnetic nanoparticle magnetization and relaxation dynamics were investigated using five nanoparticle (NP) systems with different surfactants, carrier liquids, size distributions, inter-particle spacing, and NP confinement. Dipole interactions were found to play a crucial role in modifying the blocking temperature behavior of the superparamagnetic nanoparticles, where stronger interactions were found to increase the blocking temperatures. Consequently, the blocking temperature of a densely packed nanoparticle system with stronger dipolar interactions was found to be substantially higher than those of the discrete nanoparticle systems. The frequencies of the dominant relaxation mechanisms were determined by magnetic susceptibility measurements in the frequency range of 100 Hz–7 GHz. The loss mechanisms were identified in terms of Brownian relaxation (1 kHz–10 kHz) and gyromagnetic resonance of Fe3O4 (~1.12 GHz). It was observed that the microwave absorption of the Fe3O4 nanoparticles depend on the local environment surrounding the NPs, as well as the long-range dipole–dipole interactions. These significant findings will be profoundly important in magnetic hyperthermia medical therapeutics and energy applications.
- Open Access
Active Textile Glove for Cooling and Personal Protection
Conventional gloves partially insulate against heat transfer from a hot external environment. They also prevent metabolic heat generated by the human body from escaping. Thus, gloves are a source of heat buildup and heat stress in workers. Heat stress can lead to hyperthermia. Described herein is a glove that cools using a carbon nanotube (CNT) fabric micro-liner and forced convection from a fan. A cold sink is assumed to be located in the glove to cool the convection air. This glove is called an active textile glove. CNT fabric has high thermal conductivity in the plane of the fabric, low thermal conductivity through its thickness, and a large surface area for convection cooling. Thus, the active textile glove can transfer heat from the hand to cooler air in the environment. This paper simulates the performance of a CNT-cooled glove using simple theoretical heat transfer models. Cooling was also demonstrated by testing the glove using a hot plate. Forced convection was found to provide the greatest cooling effect, with it working in synergy with the CNT fabric which aids in spreading heat. CNT fabric also acts as a shield from environmental dangers. The fabric is flame resistant, attenuates radio frequency waves, and prevents smoke particles and toxic chemicals from entering the glove. Testing illustrates the shielding properties of CNT fabric.
Open AccessActive Textile Glove for Cooling and Personal Protection
Conventional gloves partially insulate against heat transfer from a hot external environment. They also prevent metabolic heat generated by the human body from escaping. Thus, gloves are a source of heat buildup and heat stress in workers. Heat stress can lead to hyperthermia. Described herein is a glove that cools using a carbon nanotube (CNT) fabric micro-liner and forced convection from a fan. A cold sink is assumed to be located in the glove to cool the convection air. This glove is called an active textile glove. CNT fabric has high thermal conductivity in the plane of the fabric, low thermal conductivity through its thickness, and a large surface area for convection cooling. Thus, the active textile glove can transfer heat from the hand to cooler air in the environment. This paper simulates the performance of a CNT-cooled glove using simple theoretical heat transfer models. Cooling was also demonstrated by testing the glove using a hot plate. Forced convection was found to provide the greatest cooling effect, with it working in synergy with the CNT fabric which aids in spreading heat. CNT fabric also acts as a shield from environmental dangers. The fabric is flame resistant, attenuates radio frequency waves, and prevents smoke particles and toxic chemicals from entering the glove. Testing illustrates the shielding properties of CNT fabric.