Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Minzhe Liu has a total of 109 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Highly efficient continuous-wave and passively Q-switched Tm:Gd:SrF2 laser

    by Qi Yang, Haopu Xu, Ze Zhang, Yuqian Zu, Chun Li, Wenhui Ji, Minzhe Liu, Ruizhan Zhai, Zhongqing Jia, Zhen Zhang, et al.

  • All-Optical Hybrid Active-Passive Waveguide Selective Mode Converter

    by Yue Cao, Wei Yu, Ruizhan Zhai, Minzhe Liu, Xiaolin Tian, Aihui Sun, Shouyu Wang

    Waveguide-structured mode converters are essential in integrated photonics for multidimensional optical control, directly impacting the capacity and reliability of optical communication, interconnects, and mode-division multiplexing. Passive designs achieve fixed mode conversion by tailoring waveguide geometry and refractive index profile; while active control expand the flexibility through external stimuli that modulate waveguide properties for mode conversion. However, most devices confine mode conversion to the adjustment of intensity distribution under a single polarization state and lack the functionality for selective mode conversion. To address this limitation, we propose an all-optical hybrid active-passive waveguide selective mode converter that integrates a passive waveguide architecture with an active photothermal polypyrrole (PPy) material for thermally regulated mode manipulation. In the passive state, TE 00 converts to TE 01 with TM 00 unchanged; in the active state, TM 00 converts to TM 01 with TE 00 preserved, demonstrating selective mode conversion capability for both TE and TM modes. The proposed device achieves insertion losses below 0.032 dB and mode crosstalk under -21 dB, with extinction ratios exceeding 23.6 dB across all operating states at a switching power consumption of 4.79 mW. This mode converter enhances both the performance and capacity of optical communication systems and enables polarization-selective multimode control in all-optical networks.

  • Crystal growth, spectroscopic characterization, tunability, and ultrafast pulse laser properties of Yb:LaF 3 crystal

    by Zhaoqi He, Shanming Li, Yin Hang, Qi Yang, Yuqian Zu, Minzhe Liu, Yongjing Wu, Syed Zaheer Ud Din, Haopu Xu, Wenhui Ji, et al.

    A 1 at.% doped Yb:LaF 3 crystal was grown by the Bridgman method. The Raman, absorption, and fluorescence properties at room temperature were investigated systematically. The phonon energy, absorption cross-section, and emission cross-section of the Yb:LaF 3 crystal were 362 cm −1 , 0.35 × 10 −20 cm 2 , and 0.55 × 10 −20 cm 2 , respectively. The laser characteristics of Yb:LaF 3 crystals were demonstrated, including continuously tunable laser and passively mode-locked laser. Using a birefringent filter, the continuously tunable laser was obtained with a tunable range from 1011 nm to 1031 nm. An ultrashort pulse laser of 56 ps was achieved using a semiconductor saturable absorber mirror as a saturable absorber, resulting in a repetition rate of 90.10 MHz and a maximum average output power of 132 mW. The mode-locked laser corresponded to a pulse energy of 1.47 nJ and a peak power of 28.76 W. These results, underpinned by the crystal’s advantageous properties such as an intrinsically broad emission bandwidth (52 nm), indicate that the Yb:LaF 3 crystal is a promising material for developing tunable and ultrafast pulse lasers in the near-infrared regime.

  • Open Access

    Dynamic correlation between surface states and exciton in perovskite nanocrystals growth and ligand binding

    by Xiaobo Kong, Minzhe Liu, Feng Zhang, Lijuan Liu

    Colloidal lead halide perovskite (LHP) nanocrystals have attracted considerable interest in optoelectronics due to their exceptional photoelectric properties, yet quantifying the effect of nanocrystal surface states on exciton state alterations remains elusive, hindering understanding and modulation of exciton behavior. Here, we present a room-temperature synthesis strategy that decouples the supply pathways of ionized cesium and coordinated lead, enabling controlled nanocrystal growth over ∼20 min. Employing this methodology, we develop an in situ absorption-emission spectroscopy system to unveil dynamic association between nanocrystal growth kinetics and excitonic energy states, establishing a quantitative model for exciton physical characteristics. Further leveraging this dynamic correlation model, we probe the physical origin of the anomalous blue shifted absorption/emission spectra induced by benzenesulfonamide ligands. Our analysis reveals that ligand-mediated reduction of exciton binding energy constitutes the primary physical mechanism underlying the blue shifts. Urbach tail analysis confirms band edge disorder as the underlying mechanism. In situ spectroscopic monitoring and exciton state quantification enable the study of the dynamic photophysical properties of LHP nanocrystals.


  • Anisotropic Ta2PdSe6 modulator for polarization-controllable pulsed lasers in the mid-infrared band

    by Haowei Yu, Zixin Yang, Zichun Shang, Syed Zaheer Ud Din, Qiang Yu, Qi Yang, Jingxian Xiong, Yuqian Zu, Chun Li, Yongjing Wu, et al.

    Mid-infrared all-solid-state pulsed lasers are of great significance in industrial processing, military defense, and biomedical fields. However, achieving pulsed lasers with controllable output parameters in the mid-infrared range remains challenging due to the limited availability of efficient optical modulators. Anisotropic materials, owing to their polarization-dependent optical responses, offer promising opportunities for polarization-controllable mid-infrared lasers. Here, we report what we believe to be a novel optical modulator based on the anisotropic material Ta2PdSe6, enabling polarization-controllable Q-switched and Q-switched mode-locked operations at 2 µm. In the Q-switched state, pulse widths of 561.6 ns and 733.4 ns were obtained for horizontal and vertical polarizations, respectively. In the Q-switched mode-locked state, pulse durations of 2.39 ns and 2.42 ns were recorded under the corresponding polarization directions. This study demonstrates the unique advantages of anisotropic materials in the development of polarization-dependent photonic devices and provides a new perspective for designing solid-state lasers with controllable output parameters.


  • Open Access

    The Study of Soliton Mode-Locked and Bound States in Erbium-Doped Fiber Lasers Based on Cr2S3 Saturable Absorbers

    by Dong Li, Ruizhan Zhai, Yongjing Wu, Minzhe Liu, Kun Zhao, Qi Yang, Youwei Dong, Xiaoying Li, Xiaoyang Wu, Zhongqing Jia

    Femtosecond fiber lasers are widely utilized across various fields and also serve as an ideal platform for studying soliton dynamics. Bound-state solitons, as a significant soliton dynamic phenomenon, attract widespread attention and research interest because of their potential applications in high-speed optical communication, all-optical information storage, quantum computing, optical switching, and high-resolution spectroscopy. We investigate the effects of pump power variations on the formation of mode-locked solitons and bound-state solitons in a femtosecond fiber laser with a Cr2S3 saturable absorber (SA) through numerical simulations while observing the transition, formation, and break-up process of bound soliton pulses. By optimizing the cavity structure and adjusting the net dispersion, the mode-locked soliton is obtained based on this SA. This is the narrowest solitons produced by this SA to date, exhibiting the smallest time-bandwidth product. Moreover, stable double-bound solitons and unique (2 + 1) triple-bound solitons are successfully obtained. The diverse bound-state solitons not only demonstrate the excellent nonlinear absorption properties of Cr2S3 as a saturable absorber but also expand the scope of applications for Cr2S3 saturable absorbers in fiber lasers.


  • High-peak-power MOPA-based narrow-linewidth nanosecond pulsed fiber lasers in 2μm band

    by Feng Zhang, Lisha Wang, Minzhe Liu, Kun Zhao, Ruizhan Zhai, Jinao Yang, Yuxin Huang, Wei Yan

    We propose a 1950nm high average power, large pulse energy narrow-linewidth nanosecond pulse fiber laser. A closed-loop temperature control technique is employed in the design of the seed laser driving circuit system to ensure high power, high wavelength stability, and ultra-low noise characteristics. The acousto-optic modulator (AOM) is used to modulate the pulse of a continuous seed laser, and the rise time of the output pulse can be controlled to obtain the desired pulse shape and width. A master oscillating power amplifier (MOPA) structure is adopted to amplify the modulated power of the laser. Amplified by cascade amplification technique, the average output power of the pulse with the output pulse train has a repetition rate of 10MHz is 3.5W and the pulse width is 300ns, corresponding to a peak power of 1.17kW and a pulse energy of 350μJ. This type of fiber laser has vast possibilities of application especially in lidar and high-precision measurement.

  • Open Access

    Low-threshold distributed feedback laser based on holographic polymer dispersed liquid crystals through the oriented organic semiconductor films

    by Lijuan Liu, Minzhe Liu, Qidong Wang, Hanmin Hu, Feng Zhang, Xiaobo Kong

    A specific optimized configuration for low threshold organic semiconductor laser based on a holographic polymer dispersed liquid crystal (HPDLC) transmission grating was demonstrated. Here the organic semiconductor films and phase separated liquid crystal (LC) molecules were oriented along the direction of the HPDLC grating grooves. The influence of the organic semiconductor chain orientation and the excitation polarization on the optical properties of the materials has been investigated. Especially, when polymer chain orientation, LC molecules and pump light polarization are consistent with the direction of the grating grooves, the performance of the outgoing laser is greatly improved. Up to 9.78% conversion efficiency with a threshold lower to 0.12 μJ/pulse can be obtained, indicating their potential for high-performance organic optoelectronics.


  • Delivery of nanosecond laser pulses by multi-mode anti-resonant hollow core fiber at 1 µm wavelength

    by Meng Zhao, Fei Yu, Dakun Wu, Xinyue Zhu, Si Chen, Meng Wang, Minzhe Liu, Kun Zhao, Ruizhan Zhai, Zhongqing Jia, et al.

    In this paper we explore the application of low-loss multimode anti-resonant hollow-core fiber (MM-AR-HCF) in the delivery of nanosecond laser pulses at 1 µm wavelength. MM-AR-HCF with large core offers a rich content of low-loss higher-order modes which plays a key role in the efficient coupling and transmission of high-power laser of low beam quality. In the experiment, laser pulses of an average pulse energy of 21.8 mJ with 14.6 ns pulse width (corresponding a peak power of 1.49 MW) are transmitted through MM-AR-HCF of 9.8 m length without damage. 85% transmission efficiency is achieved where the incident laser beam suffers a low beam quality with M2x and M2y of 2.18 and 1.99 respectively. Laser-induced damage threshold (LIDT) of MM-AR-HCF was measured to be 22.6 mJ for 85% transmission efficiency, which is 7 times higher than that for a multimode silica optical fiber with a large core of 200 µm.


  • Open Access

    Research on in-situ detection technology for marine biofouling based on photoacoustic signal excitation and detection

    by Qinglin Kong, Xingkui Yan, Shanshan Zheng, Dongqing Peng, Haofang Yu, Liang Zheng, Minzhe Liu, Wei Wang, Ruizhan Zhai, Peixin Chen

    SPIE Digital Library Proceedings