Jeong Muk Choi
Jeong Muk Choi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Man Soo Joun
ReCAPT, School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju 52828, Republic of Korea
2 shared publications - Afaf Amera Abd Ghawi
Graduate School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju 52828, Republic of Korea
1 shared publication - Hoon-Hwe Cho
Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Republic of Korea
1 shared publication - Hyojoo Lee
Department of Materials Science and Engineering, Hanbat National University, 125 Dongseodae-ro, Yuseong-gu, Daejeon 34158, Republic of Korea
1 shared publication - Jae Yong Song
Center for Materials Genome, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-340, Republic of Korea
1 shared publication - Jaekook Kim
Department of Materials Science and Engineering, Chonnam National University, 300Yongbong-dong, Bukgu, Gwangju, 500-757, South Korea
1 shared publication
Latest Publications
- Open Access
Electrochemical Hydrogen-Charging Effect on the Microstructural Evolution and Mechanical Behavior of Deformed Ti Alloy
In this work, hydrogen is introduced into deformed Ti alloys via cathodic electrolysis under various charging conditions, and the microstructures and mechanical properties of the specimens are examined. The presence of hydrides is verified using X-ray diffraction, scanning electron microscopy, and electron backscatter diffraction analysis based on a rescanning approach using local pattern averaging. Hydrogen charging induces changes in the microstructure, making it possible to determine the hydrogen penetration depth. Vickers hardness tests are then performed to assess the extent of hydrogen penetration in the Ti alloys. Compression tests are conducted to further understand the impacts of hydrides on the mechanical reliability of hydrogen-charged Ti alloys. To reinforce the experimental findings, numerical simulations are conducted utilizing experimental data to comprehend hydrogen diffusion in the Ti alloys. Subsequently, the hydrogen diffusion mechanism in the hydrogen-charged specimens is verified through the obtained results.
Open AccessElectrochemical Hydrogen-Charging Effect on the Microstructural Evolution and Mechanical Behavior of Deformed Ti Alloy
In this work, hydrogen is introduced into deformed Ti alloys via cathodic electrolysis under various charging conditions, and the microstructures and mechanical properties of the specimens are examined. The presence of hydrides is verified using X-ray diffraction, scanning electron microscopy, and electron backscatter diffraction analysis based on a rescanning approach using local pattern averaging. Hydrogen charging induces changes in the microstructure, making it possible to determine the hydrogen penetration depth. Vickers hardness tests are then performed to assess the extent of hydrogen penetration in the Ti alloys. Compression tests are conducted to further understand the impacts of hydrides on the mechanical reliability of hydrogen-charged Ti alloys. To reinforce the experimental findings, numerical simulations are conducted utilizing experimental data to comprehend hydrogen diffusion in the Ti alloys. Subsequently, the hydrogen diffusion mechanism in the hydrogen-charged specimens is verified through the obtained results.
- Open Access
Practical Approach for Determining Material Parameters When Predicting Austenite Grain Growth under Isothermal Heat Treatment
An investigation of austenite grain growth (AGG) during the isothermal heat treatment of low-alloy steel is conducted. The goal is to uncover the effect of time, temperature, and initial grain size on SA508-III steel grain growth. Understanding this relationship enables the optimization of the time and temperature of the heat treatment to achieve the desired grain size in the studied steel. A modified Arrhenius model is used to model austenite grain size (AGS) growth distributions. With this model, it is possible to predict how grain size will change depending on heat treatment conditions. Then, the generalized reduced gradient (GRG) optimization method is employed under adiabatic conditions to characterize the model’s parameters, providing a more precise solution than traditional methods. With optimal model parameters, predicted AGS agree well with measured values. The model shows that AGS increases faster as temperature and time increase. Similarly, grain size grows directly in proportion to the initial grain size. The optimized parameters are then applied to a practical case study with a similar specimen size and material properties, demonstrating that our approach can efficiently and accurately predict AGS growth via GRG optimization.
Open AccessPractical Approach for Determining Material Parameters When Predicting Austenite Grain Growth under Isothermal Heat Treatment
An investigation of austenite grain growth (AGG) during the isothermal heat treatment of low-alloy steel is conducted. The goal is to uncover the effect of time, temperature, and initial grain size on SA508-III steel grain growth. Understanding this relationship enables the optimization of the time and temperature of the heat treatment to achieve the desired grain size in the studied steel. A modified Arrhenius model is used to model austenite grain size (AGS) growth distributions. With this model, it is possible to predict how grain size will change depending on heat treatment conditions. Then, the generalized reduced gradient (GRG) optimization method is employed under adiabatic conditions to characterize the model’s parameters, providing a more precise solution than traditional methods. With optimal model parameters, predicted AGS agree well with measured values. The model shows that AGS increases faster as temperature and time increase. Similarly, grain size grows directly in proportion to the initial grain size. The optimized parameters are then applied to a practical case study with a similar specimen size and material properties, demonstrating that our approach can efficiently and accurately predict AGS growth via GRG optimization.
- Open Access
Accurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process
The flow behaviors of metallic materials are sensitive to state variables, including strain, strain rate, and temperature. In particular, the temperature effect on the flow behavior is of great importance. The flow information is usually obtained at the sample strain rates and temperatures from the hot cylinder compression test. However, this test is inevitably exposed to undesirable effects of friction and temperature on flow characterization. This study reveals their impact on the flow curve of an A6082 alloy. The unique features of its flow behavior and the inaccuracy of as-received, primitive flow information are emphasized. Using a systematic way of correcting the friction and temperature effects, the flow curves with high accuracy in terms of the compression load–stroke curve obtained from the test are calculated. It was revealed that the both the friction and temperature compensation of the primitive flow curves bring a minor change in the flow curves of the A6082 alloy, which is quite different from other commercial light metals. This phenomenon caused by the unique features of the flow behavior of the A6082 or other aluminum alloys will be critical to solving various process and quality matters confronted by the engineers in the hot metal forming industry.
Open AccessAccurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process
The flow behaviors of metallic materials are sensitive to state variables, including strain, strain rate, and temperature. In particular, the temperature effect on the flow behavior is of great importance. The flow information is usually obtained at the sample strain rates and temperatures from the hot cylinder compression test. However, this test is inevitably exposed to undesirable effects of friction and temperature on flow characterization. This study reveals their impact on the flow curve of an A6082 alloy. The unique features of its flow behavior and the inaccuracy of as-received, primitive flow information are emphasized. Using a systematic way of correcting the friction and temperature effects, the flow curves with high accuracy in terms of the compression load–stroke curve obtained from the test are calculated. It was revealed that the both the friction and temperature compensation of the primitive flow curves bring a minor change in the flow curves of the A6082 alloy, which is quite different from other commercial light metals. This phenomenon caused by the unique features of the flow behavior of the A6082 or other aluminum alloys will be critical to solving various process and quality matters confronted by the engineers in the hot metal forming industry.