Yexin Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yexin Zhou has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Zheng Zhong
School of Science, Harbin Institute of Technology, Shenzhen, China
6 shared publications - Zehua Pan
School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China
5 shared publications Bin Chen
Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, Shenzhen University, Shenzhen, China
2 shared publicationsChengrong Yu
School of Science, Harbin Institute of Technology, Shenzhen, China
2 shared publications- Haiyi Liang
School of Civil Engineering, Anhui Jianzhu University, Hefei 230601, China
2 shared publications Hongying Zhang
School of Science, Harbin Institute of Technology, Shenzhen, China
2 shared publications
Latest Publications
- Open Access
Multi-Physics Coupling Simulation of H2O–CO2 Co-Electrolysis Using Flat Tubular Solid Oxide Electrolysis Cells
Solid oxide electrolysis cells (SOECs) have emerged as a promising technology for efficient energy storage and CO2 utilization via H2O–CO2 co-electrolysis. While most previous studies focused on planar or tubular configurations, this work investigated a novel flat, tubular SOEC design using a comprehensive 3D multi-physics model developed in COMSOL Multiphysics 5.6. This model integrates charge transfer, gas flow, heat transfer, chemical/electrochemical reactions, and structural mechanics to analyze operational behavior and thermo-mechanical stress under different voltages and pressures. Simulation results indicate that increasing operating voltage leads to significant temperature and current density inhomogeneity. Furthermore, elevated pressure improves electrochemical performance, possibly due to increased reactant concentrations and reduced mass transfer limitations; however, it also increases temperature gradients and the maximum first principal stress. These findings underscore that the design and optimization of flat tubular SOECs in H2O–CO2 co-electrolysis should take the trade-off between performance and durability into consideration.
Open AccessMulti-Physics Coupling Simulation of H2O–CO2 Co-Electrolysis Using Flat Tubular Solid Oxide Electrolysis Cells
Solid oxide electrolysis cells (SOECs) have emerged as a promising technology for efficient energy storage and CO2 utilization via H2O–CO2 co-electrolysis. While most previous studies focused on planar or tubular configurations, this work investigated a novel flat, tubular SOEC design using a comprehensive 3D multi-physics model developed in COMSOL Multiphysics 5.6. This model integrates charge transfer, gas flow, heat transfer, chemical/electrochemical reactions, and structural mechanics to analyze operational behavior and thermo-mechanical stress under different voltages and pressures. Simulation results indicate that increasing operating voltage leads to significant temperature and current density inhomogeneity. Furthermore, elevated pressure improves electrochemical performance, possibly due to increased reactant concentrations and reduced mass transfer limitations; however, it also increases temperature gradients and the maximum first principal stress. These findings underscore that the design and optimization of flat tubular SOECs in H2O–CO2 co-electrolysis should take the trade-off between performance and durability into consideration.
- Open Access
High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells
Proton-conducting solid oxide fuel cells (P-SOFCs) are widely studied for their lower working temperatures than oxygen-ion-conducting SOFCs (O-SOFCs). Due to the elevated preparation and operation temperatures varying from 500 °C to 1500 °C, high mechanical stresses can be developed in the electrolytes of SOFCs. The stresses will in turn impact the electrical conductivities, which is often omitted in current studies. In this work, the mechanical–conductive behaviors of Y-doped BaZrO3 (BZY) electrolytes for P-SOFCs under high temperatures are studied through molecular dynamics modeling. The Young’s moduli of BZY in fully hydrated and non-hydrated states are calculated with different Y-doping concentrations and at different temperatures. It is shown that Y doping, oxygen vacancies, and protonic point defects all lead to a decrease in the Young’s moduli of BZY at 773 K. The variations in the conductivities of BZY are then investigated by calculating the diffusion rates of protons in BZY at different triaxial, biaxial, and uniaxial strains from 673 K to 873 K. In all cases, the diffusion rate present a trend of first increasing and then decreasing from compression state to tension state. The variations in elementary affecting factors of proton diffusion, including hydroxide rotation, proton transfer, proton trapping, and proton distribution, are then analyzed in detail under different strains. It is concluded that the influences of strains on these factors collectively determine the changes in proton conductivity.
Open AccessHigh-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells
Proton-conducting solid oxide fuel cells (P-SOFCs) are widely studied for their lower working temperatures than oxygen-ion-conducting SOFCs (O-SOFCs). Due to the elevated preparation and operation temperatures varying from 500 °C to 1500 °C, high mechanical stresses can be developed in the electrolytes of SOFCs. The stresses will in turn impact the electrical conductivities, which is often omitted in current studies. In this work, the mechanical–conductive behaviors of Y-doped BaZrO3 (BZY) electrolytes for P-SOFCs under high temperatures are studied through molecular dynamics modeling. The Young’s moduli of BZY in fully hydrated and non-hydrated states are calculated with different Y-doping concentrations and at different temperatures. It is shown that Y doping, oxygen vacancies, and protonic point defects all lead to a decrease in the Young’s moduli of BZY at 773 K. The variations in the conductivities of BZY are then investigated by calculating the diffusion rates of protons in BZY at different triaxial, biaxial, and uniaxial strains from 673 K to 873 K. In all cases, the diffusion rate present a trend of first increasing and then decreasing from compression state to tension state. The variations in elementary affecting factors of proton diffusion, including hydroxide rotation, proton transfer, proton trapping, and proton distribution, are then analyzed in detail under different strains. It is concluded that the influences of strains on these factors collectively determine the changes in proton conductivity.
- 14 August 2024
- Published by Springer Nature in Acta Mechanica Solida Sinica
- p. 1-13
Performance and Stress Analysis of Flat-Tubular Solid Oxide Fuel Cells Fueled with Methane and Hydrogen
- 14 August 2024
- Published by Springer Nature in Acta Mechanica Solida Sinica
- p. 1-13
Performance and Stress Analysis of Flat-Tubular Solid Oxide Fuel Cells Fueled with Methane and Hydrogen
- 30 April 2024
- Published by Springer Nature in Frontiers in Energy
- Vol. 18 (5) , 583-611
Scientometric analysis of research trends on solid oxide electrolysis cells for green hydrogen and syngas production
- 30 April 2024
- Published by Springer Nature in Frontiers in Energy
- Vol. 18 (5) , 583-611
Scientometric analysis of research trends on solid oxide electrolysis cells for green hydrogen and syngas production
- 1 January 2024
- Published by Springer Nature in Frontiers in Energy
- Vol. 18 (3) , 356-368
Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells
- 1 January 2024
- Published by Springer Nature in Frontiers in Energy
- Vol. 18 (3) , 356-368
Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells
- 9 August 2023
- Published by Emerald Publishing in Engineering Computations
- Vol. 40 (7/8) , 1617-1632
Data augmentation and data mining towards microstructure and property relationship for composites
Purpose: In recent years, the convolutional neural network (CNN) based deep learning approach has succeeded in data-mining the relationship between microstructures and macroscopic properties of materials. However, such CNN models usually rely heavily on a large set of labeled images to ensure the accuracy and generalization ability of the predictive models. Unfortunately, in many fields, acquiring image data is expensive and inconvenient. This study aims to propose a data augmentation technique to enhance the performance of the CNN models for linking microstructural images to the macroscopic properties of composites.Design/methodology/approach: Microstructures of composites are synthesized using discrete element simulations and Potts kinetic Monte Carlo simulations. Macroscopic properties such as the elastic modulus, Poisson's ratio, shear modulus, coefficient of thermal expansion, and triple-phase boundary length density are extracted on representative volume elements. The CNN model is trained using the 3D microstructural images as inputs and corresponding macroscopic properties as the labels. The comparison of the predictive performance of the CNN models with and without data augmentation treatment are compared.Findings: The comparison between the prediction performance of CNN models with and without data augmentation showed that the former reduced the weighted mean absolute percentage error (WMAPE) for the prediction from 5.1627% to 1.7014%. This significant reduction signifies that the proposed data augmentation method can effectively enhance the generalization ability and robustness of CNN models.Originality/value: This study demonstrates that data augmentation is beneficial for solving the problems of model overfitting, data scarcity, and sample imbalance for CNN-based deep learning tasks at a low cost. By developing more and advanced data augmentation techniques, deep learning accelerated homogenization will boost the multi-scale computational mechanics and materials.
- 9 August 2023
- Published by Emerald Publishing in Engineering Computations
- Vol. 40 (7/8) , 1617-1632
Data augmentation and data mining towards microstructure and property relationship for composites
Purpose: In recent years, the convolutional neural network (CNN) based deep learning approach has succeeded in data-mining the relationship between microstructures and macroscopic properties of materials. However, such CNN models usually rely heavily on a large set of labeled images to ensure the accuracy and generalization ability of the predictive models. Unfortunately, in many fields, acquiring image data is expensive and inconvenient. This study aims to propose a data augmentation technique to enhance the performance of the CNN models for linking microstructural images to the macroscopic properties of composites.Design/methodology/approach: Microstructures of composites are synthesized using discrete element simulations and Potts kinetic Monte Carlo simulations. Macroscopic properties such as the elastic modulus, Poisson's ratio, shear modulus, coefficient of thermal expansion, and triple-phase boundary length density are extracted on representative volume elements. The CNN model is trained using the 3D microstructural images as inputs and corresponding macroscopic properties as the labels. The comparison of the predictive performance of the CNN models with and without data augmentation treatment are compared.Findings: The comparison between the prediction performance of CNN models with and without data augmentation showed that the former reduced the weighted mean absolute percentage error (WMAPE) for the prediction from 5.1627% to 1.7014%. This significant reduction signifies that the proposed data augmentation method can effectively enhance the generalization ability and robustness of CNN models.Originality/value: This study demonstrates that data augmentation is beneficial for solving the problems of model overfitting, data scarcity, and sample imbalance for CNN-based deep learning tasks at a low cost. By developing more and advanced data augmentation techniques, deep learning accelerated homogenization will boost the multi-scale computational mechanics and materials.
- 23 July 2021
- Published by Emerald Publishing in Engineering Computations
- Vol. 39 (3) , 837-857
A computational model for diffusion-reaction-deformation coupled problems and its finite element implementation
Purpose: A diffusion-reaction-deformation coupled model is employed and implemented as a user-defined element (UEL) subroutine in the commercial finite element software package ABAQUS.Design/methodology/approach: Chemical reaction and diffusion are treated as two distinct processes by introducing the extent of reaction and the diffusion concentration as two kinds of independent variables, for which the independent governing equations for chemical reaction and diffusion processes are obtained. Furthermore, an exponential form of chemical kinetics, instead of the linearly phenomenological relation, between the reaction rate and the chemical affinity is used to describe reaction process. As a result, complex chemical reaction can be simulated, no matter it is around or away from equilibrium.Findings: Two numerical examples are presented, one for validation of the model and another for the modeling of the deflection of a plane caused by a chemical reaction.Originality/value: 1. Independent governing equations for diffusion and reaction processes are given. 2. An exponential relation between the reaction rate and its driving force is employed. 3. The UEL subroutine is used to implement the finite element procedure.
- 23 July 2021
- Published by Emerald Publishing in Engineering Computations
- Vol. 39 (3) , 837-857
A computational model for diffusion-reaction-deformation coupled problems and its finite element implementation
Purpose: A diffusion-reaction-deformation coupled model is employed and implemented as a user-defined element (UEL) subroutine in the commercial finite element software package ABAQUS.Design/methodology/approach: Chemical reaction and diffusion are treated as two distinct processes by introducing the extent of reaction and the diffusion concentration as two kinds of independent variables, for which the independent governing equations for chemical reaction and diffusion processes are obtained. Furthermore, an exponential form of chemical kinetics, instead of the linearly phenomenological relation, between the reaction rate and the chemical affinity is used to describe reaction process. As a result, complex chemical reaction can be simulated, no matter it is around or away from equilibrium.Findings: Two numerical examples are presented, one for validation of the model and another for the modeling of the deflection of a plane caused by a chemical reaction.Originality/value: 1. Independent governing equations for diffusion and reaction processes are given. 2. An exponential relation between the reaction rate and its driving force is employed. 3. The UEL subroutine is used to implement the finite element procedure.
- 9 July 2021
- Published by The Electrochemical Society in ECS Transactions
- Vol. 103 (1) , 2217-2231
Thermal Residual Stress and Failure Probability of Functionally Grade Ni-YSZ Anode of Solid Oxide Fuel Cells Using a Finite Element Analysis
The differences of thermal expansion coefficient between the components in the solid oxide fuel cells (SOFCs) is one of the important causes of large residual thermal stress in the fabrication process of the cell. The functionally graded (FG) Ni-YSZ anode design was introduced between Ni-YSZ support and YSZ electrolyte. Residual thermal stress was calculated by finite element method (FEM) using the commercial ANSYS package. Weibull probability model was used to evaluate the failure probability. The effects of sublayer number w , exponential factor n , and gradient layer thickness on the stress and failure probability are discussed. The calculation results show that the FG anode layer can obviously reduce the stress. The failure probability can be reduced by several orders of magnitude at most as compared with the conventional SOFC. The sublayers number w =2 is a suitable value. The research provides a reference for further optimizing the stress in SOFC.
- 9 July 2021
- Published by The Electrochemical Society in ECS Transactions
- Vol. 103 (1) , 2217-2231
Thermal Residual Stress and Failure Probability of Functionally Grade Ni-YSZ Anode of Solid Oxide Fuel Cells Using a Finite Element Analysis
The differences of thermal expansion coefficient between the components in the solid oxide fuel cells (SOFCs) is one of the important causes of large residual thermal stress in the fabrication process of the cell. The functionally graded (FG) Ni-YSZ anode design was introduced between Ni-YSZ support and YSZ electrolyte. Residual thermal stress was calculated by finite element method (FEM) using the commercial ANSYS package. Weibull probability model was used to evaluate the failure probability. The effects of sublayer number w , exponential factor n , and gradient layer thickness on the stress and failure probability are discussed. The calculation results show that the FG anode layer can obviously reduce the stress. The failure probability can be reduced by several orders of magnitude at most as compared with the conventional SOFC. The sublayers number w =2 is a suitable value. The research provides a reference for further optimizing the stress in SOFC.
- 13 November 2020
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (1)
Constructing Rigid-Foldable Generalized Miura-Ori Tessellations for Curved Surfaces
Origami has shown the potential to approximate three-dimensional curved surfaces by folding through designed crease patterns on flat materials. The Miura-ori tessellation is a widely used pattern in engineering and tiles the plane when partially folded. Based on constrained optimization, this article presents the construction of generalized Miura-ori patterns that can approximate three-dimensional parametric surfaces of varying curvatures while preserving the inherent properties of the standard Miura-ori, including developability, flat foldability, and rigid foldability. An initial configuration is constructed by tiling the target surface with triangulated Miura-like unit cells and used as the initial guess for the optimization. For approximation of a single target surface, a portion of the vertexes on the one side is attached to the target surface; for fitting of two target surfaces, a portion of vertexes on the other side is also attached to the second target surface. The parametric coordinates are adopted as the unknown variables for the vertexes on the target surfaces, while the Cartesian coordinates are the unknowns for the other vertexes. The constructed generalized Miura-ori tessellations can be rigidly folded from the flat state to the target state with a single degree-of-freedom.
- 13 November 2020
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (1)
Constructing Rigid-Foldable Generalized Miura-Ori Tessellations for Curved Surfaces
Origami has shown the potential to approximate three-dimensional curved surfaces by folding through designed crease patterns on flat materials. The Miura-ori tessellation is a widely used pattern in engineering and tiles the plane when partially folded. Based on constrained optimization, this article presents the construction of generalized Miura-ori patterns that can approximate three-dimensional parametric surfaces of varying curvatures while preserving the inherent properties of the standard Miura-ori, including developability, flat foldability, and rigid foldability. An initial configuration is constructed by tiling the target surface with triangulated Miura-like unit cells and used as the initial guess for the optimization. For approximation of a single target surface, a portion of the vertexes on the one side is attached to the target surface; for fitting of two target surfaces, a portion of vertexes on the other side is also attached to the second target surface. The parametric coordinates are adopted as the unknown variables for the vertexes on the target surfaces, while the Cartesian coordinates are the unknowns for the other vertexes. The constructed generalized Miura-ori tessellations can be rigidly folded from the flat state to the target state with a single degree-of-freedom.
- Open Access
Constructing rigid-foldable generalized Miura-ori tessellations for curved surfaces
Origami has shown the potential to approximate three-dimensional curved surfaces by folding through designed crease patterns on flat materials. The Miura-ori tessellation is a widely used pattern in engineering and tiles the plane when partially folded. Based on constrained optimization, this paper presents the construction of generalized Miura-ori patterns that can approximate three-dimensional parametric surfaces of varying curvatures while preserving the inherent properties of the standard Miura-ori, including developability, flat-foldability and rigid-foldability. An initial configuration is constructed by tiling the target surface with triangulated Miura-like unit cells and used as the initial guess for the optimization. For approximation of a single target surface, a portion of the vertexes on the one side is attached to the target surface; for fitting of two target surfaces, a portion of vertexes on the other side is also attached to the second target surface. The parametric coordinates are adopted as the unknown variables for the vertexes on the target surfaces whilst the Cartesian coordinates are the unknowns for the other vertexes. The constructed generalized Miura-ori tessellations can be rigidly folded from the flat state to the target state with a single degree of freedom.
Open AccessConstructing rigid-foldable generalized Miura-ori tessellations for curved surfaces
Origami has shown the potential to approximate three-dimensional curved surfaces by folding through designed crease patterns on flat materials. The Miura-ori tessellation is a widely used pattern in engineering and tiles the plane when partially folded. Based on constrained optimization, this paper presents the construction of generalized Miura-ori patterns that can approximate three-dimensional parametric surfaces of varying curvatures while preserving the inherent properties of the standard Miura-ori, including developability, flat-foldability and rigid-foldability. An initial configuration is constructed by tiling the target surface with triangulated Miura-like unit cells and used as the initial guess for the optimization. For approximation of a single target surface, a portion of the vertexes on the one side is attached to the target surface; for fitting of two target surfaces, a portion of vertexes on the other side is also attached to the second target surface. The parametric coordinates are adopted as the unknown variables for the vertexes on the target surfaces whilst the Cartesian coordinates are the unknowns for the other vertexes. The constructed generalized Miura-ori tessellations can be rigidly folded from the flat state to the target state with a single degree of freedom.