WFWenpei Feng

Wenpei Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenpei Feng has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Erosion Damage Behavior and Mechanisms of an Fe Substrate Induced by Solid Pb Particles in Lead–Bismuth Reactor Coolant

    by Zhaole Wang, Wenpei Feng, Xue Zhang, Hongxing Yu, Zhike Lan, Li Rui

    Lead-cooled fast reactors and lead–bismuth eutectic (LBE) cooling systems are promising advanced nuclear technologies, but structural materials remain vulnerable to coupled corrosion and mechanical damage. Solid particles transported in LBE, such as oxide fragments and metallic debris, may induce localized erosion through impact and sliding, thereby compromising surface integrity and promoting subsequent corrosion. However, the atomic-scale mechanisms governing such damage remain unclear. In this study, molecular dynamics simulations were performed to investigate nanoindentation and nanoscratching of an Fe substrate by a solid Pb particle at 573 K. The mechanical response, surface morphology, local stress, crystal structure, and dislocation evolution were systematically analyzed. During indentation, the Fe substrate initially undergoes elastic compression and lattice distortion, followed by plastic relaxation through the nucleation and propagation of 1/2 dislocations. During scratching, combined normal compression and tangential shear drive irreversible plastic flow, producing continuous grooves and directional material pile-up. Structural analysis shows that high-pressure-induced phase transformation remains negligible, while plastic deformation is dominated by dislocation nucleation, propagation, reaction, migration, and annihilation. The synchronized fluctuations of normal and tangential forces further reveal strong coupling between contact mechanics and subsurface dislocation restructuring. These results provide atomic-scale insight into solid-particle-induced erosion damage and clarify the dominant role of dislocation-mediated plasticity in the initiation of mechanical damage–corrosion coupling in LBE environments.

  • Open Access

    Multiphysics propagation of oxidation-corrosion effects in a lead-cooled fast reactor

    by Wenpei Feng, Hongxing Yu, Xue Zhang, Xingqing Lu, Zhike Lan, Li Rui

    Long-term growth of oxide scales on fuel cladding in lead-cooled fast reactors increases the thermal resistance to heat transfer; however, the propagation of the resulting thermal perturbations to the core-wide power distribution still needs to be evaluated within a multiphysics feedback framework. In this study, the Monte Carlo neutron transport code RMC is coupled with the thermal-hydraulic and corrosion code KMC-SUBtra-MC to investigate oxide-scale evolution, temperature response, and power redistribution in the M²LFR-1000 core over 15,000 h under prescribed total power and thermal-hydraulic boundary conditions. The results show pronounced inter-assembly differences and axial non-uniformity in both the magnetite and spinel layers, with axially averaged peak thicknesses of approximately 22 and 18 μm, respectively. The cladding inner-surface temperature generally increases, and its local change has a Pearson correlation coefficient of 0.879 with the increment in equivalent thermal resistance. By contrast, the correlation coefficient between the fuel-center temperature change and the thermal-resistance increment is only 0.272, indicating that the fuel temperature is also modulated by changes in local heat generation. The relative assembly power changes by approximately -1.7% to +1.6% and is strongly correlated with the change in axially averaged fuel temperature (r = 0.969). Among the 355 assemblies, 126 simultaneously exhibit a decrease in power, a decrease in fuel temperature, and an increase in cladding temperature, whereas the core-averaged axial temperature and power profiles remain essentially unchanged. These results demonstrate that, under the conditions investigated, the fuel-temperature response is jointly governed by the accumulation of oxide-scale thermal resistance and local power changes, while the corrosion effect is manifested primarily as a local thermal-state correction and a redistribution of normalized power share.

  • Open Access

    Mechanism of rod-bowing-induced circumferential heat-transfer deterioration in a tight He-Xe gas-cooled rod bundle with conjugate heat transfer

    by Wenpei Feng, Xingqing Lu, Hongxing Yu, Zhike Lan, He Xiaoqiang, Wenshun Duan, Xue Zhang

    Rod bowing in tightly packed gas-cooled fuel bundles can induce severe circumferential degradation of heat transfer, yet the coupled mechanisms under He–Xe conjugate heat transfer conditions remain insufficiently understood. This study investigates a 19-rod He–Xe-cooled bundle with central rod bowing using three-dimensional CFD coupled with conjugate heat transfer. The effects of deformation on subchannel redistribution, turbulence modulation, and wall thermal response are systematically analyzed under heat fluxes of 1.0×10⁵ and 2.0×10⁵ W/m². Results show that relative to the straight configuration, the bowed configuration exhibits a maximum relative reduction in Nusselt number along the central rod of approximately 9–10%, with deterioration extending downstream of the maximum-bowing plane. At this plane, the region-averaged local Nusselt number on the narrow-gap side of the bowed central rod is 56% lower than that on its opposite side. Reduced wall shear stress and interfacial heat flux coincide with elevated wall temperatures in the narrowed region, consistent with weakened local convective heat removal. The narrow–wide gap region temperature difference increases from 93.4 K to 191.8 K as the imposed heat flux doubles. These results characterize the localized thermal penalties associated with the prescribed rod deformation and provide a basis for assessing cooling nonuniformity in He–Xe-cooled rod bundles.

  • Open Access

    Thermal performance and hierarchical lightweight optimization of a fluid-pipe radiator for space nuclear power systems

    by Bing Xiang, Wenpei Feng, Xingqing Lu, Xue Zhang, Zhike Lan, Hongxing Yu

    Megawatt-class space nuclear power systems require heat rejection systems with both high thermal performance and low structural mass, creating an inherent trade-off between radiating area and lightweight design. In this study, a computationally efficient coupled thermal model and a hierarchical optimization framework are developed for a fluid-pipe radiator. The transient model couples coolant convection, radial heat conduction through the pipe wall, axial heat conduction in the fins, and radiative heat rejection to the space environment. Its predictive capability is assessed against three-dimensional CFD simulations and published radiating-fin experiments. A two-stage optimization strategy is subsequently proposed, in which a multi-objective genetic algorithm first optimizes the global fin configuration, followed by temperature-field-guided evolutionary structural optimization to remove locally inefficient material. The model predicts the bulk coolant temperature with a relative error of 0.13%, while the deviation in the fin temperature distribution remains below 7.4%. The thermal analysis reveals a pronounced diminishing return of increasing fin length because the decrease in fin temperature substantially reduces the radiative contribution of distal regions. At a coolant inlet temperature of 600 K, global parametric optimization increases the heat rejection power by 11.5% while reducing the radiator mass by 6.3%. For the 800 K operating condition, local material reconstruction with a temperature threshold of 400 K further reduces the mass by 17.4% with only a 6.9% decrease in heat rejection power, increasing the specific heat rejection power from 3.36 to 3.79 kW/kg. These results demonstrate that hierarchical global–local optimization can effectively exploit spatial variations in radiative effectiveness and provides an efficient design strategy for lightweight, high-performance radiators in space nuclear power systems.

  • Open Access

    Mechanism of rod-bowing-induced circumferential heat-transfer deterioration in a tight He-Xe gas-cooled rod bundle with conjugate heat transfer

    by Wenpei Feng, Haoxuan Huang, Dan Wu, Hongxing Yu, Zhike Lan, Chang Zeng, Xue Zhang

    Rod bowing in tightly packed gas-cooled fuel bundles can induce severe circumferential degradation of heat transfer, yet the coupled mechanisms under He–Xe conjugate heat transfer conditions remain insufficiently understood. This study investigates a 19-rod He–Xe-cooled bundle with central rod bowing using three-dimensional CFD coupled with conjugate heat transfer. The effects of deformation on subchannel redistribution, turbulence modulation, and wall thermal response are systematically analyzed under heat fluxes of 1.0×10⁵ and 2.0×10⁵ W/m². Results show that rod bowing leads to a localized reduction in convective heat transfer, with the maximum Nusselt number decreasing by 9.21%–9.56% along the axial direction. At the plane of maximum deformation, turbulent kinetic energy and wall shear stress in the narrow-gap region decrease by 57% and 36% (central rod), respectively, accompanied by a 56% reduction in local Nusselt number. Consequently, circumferential wall temperature non-uniformity increases significantly, with the narrow–wide gap temperature difference rising from 93.4 K to 191.8 K as heat flux doubles. The results demonstrate that rod bowing triggers a coupled deterioration of momentum transport and convective heat removal in narrow subchannels, while solid conduction only partially mitigates hot-spot formation. This work provides mechanistic insight into deformation-induced thermal–hydraulic degradation in gas-cooled reactor rod bundles.

  • Open Access

    Thermal-hydraulic effects of Irregular roughness in liquid metal cooled narrow rectangular channels

    by Xue Zhang, Baiping Wang, Wenpei Feng, Chang Zeng, Jian Deng, Hongxing Yu

    Irregular wall roughness produced by long-term erosion-corrosion may significantly affect the thermal-hydraulic performance of liquid-metal-cooled narrow rectangular channels. In this study, a three-dimensional random rough surface was constructed from Gaussian-distributed height fluctuations and characterized by the root-mean-square roughness, Rq. The generated roughness was imposed on the heated walls of a rectangular channel, and a three-dimensional numerical model was developed to investigate the coupled flow and heat transfer processes under constant wall heat flux conditions. Special consideration was given to turbulent heat transfer modeling for low-Prandtl-number liquid metals. The numerical results were assessed against published empirical correlations and experimental measurements. It was found that increasing Rq intensifies near-wall flow separation and cross-stream mixing, thereby weakening the thermal boundary layer and improving convective heat transfer. At high Peclet numbers, the average Nusselt number was up to 60% higher than that in the smooth-wall case. Meanwhile, the enhancement in heat transfer was accompanied by a substantial hydraulic penalty, as both the friction factor and pressure drop increased significantly with roughness and gradually approached a Reynolds-number-insensitive fully rough state. These results provide a quantitative basis for evaluating roughness-induced thermal-hydraulic performance changes in liquid-metal-cooled reactor channels.

  • Experimental study of heat pipe start-up characteristics and development of an enhanced model considering gas diffusion effects

    by Ruicheng Zhong, Wenpei Feng, Yugao Ma, Jian Deng, Yu Liu, Shuhua Ding, Xiaoyu Wang, Yu Liang, Guangliang Yang