SLShiquan Lan

Shiquan Lan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shiquan Lan has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A novel alternating glide–drift operation mode for energy-efficient underwater glider missions

    by Yingjie Wang, Shiquan Lan, Lianhong Zhang, Yan Liang

    1. Marine environmental observation requires sustained acquisition of high-resolution in situ data over large spatial and temporal scales under dynamically complex ocean conditions. These requireme...

  • Open Access

    Sim-to-Real Yaw Control of a Robotic Sea Lion Using Deep Reinforcement Learning

    by Zeyi Zhang, Yuhong Liu, Shuangtao Liu, Shiquan Lan, Wendong Niu, Jinyang Du, Huan Bai

    Yaw regulation of biomimetic underwater robots is complicated by flexible body motion, nonlinear hydrodynamics, and coupled actuation. This study examines whether a policy trained in simulation can be deployed on an existing robotic sea lion (RSL) without changing its hardware or low-level controllers. A deep deterministic policy gradient (DDPG) controller was formulated from measurable states and available actuator commands and trained in Webots using a model calibrated from previous tank tests. Four manually selected reward-weight settings and command update rates of 1, 2, 5, and 10 Hz were examined as deployment-oriented sensitivity comparisons, after which a 5 Hz policy was evaluated in six tank trials. Performance was reanalyzed using the circular-angle mean absolute error (MAE) and root mean square error (RMSE). In the two straight-swimming trials, the per-trial MAE was 1.01–1.12°, and the RMSE was 1.10–1.46°. In the four turning trials, evaluated from the first target crossing to the end of each record, the MAE was 1.71–3.63°, the RMSE was 2.10–4.20°, and the maximum overshoot was 2.99–7.70°. Despite the transient differences between simulations and experiments, the controller regulated the robot toward the target headings in all six tank trials. These results demonstrate the successful sim-to-real deployment of reinforcement-learning-based yaw control under low-frequency communication constraints and provide experimental evidence for its application to biomimetic underwater robots.

  • Open Access

    Acoustics-Driven Performance Enhancement in Underwater Vehicles: From Component Innovation to Intelligent Actuation

    by Xuehao Wang, Zihao Wang, Linzhi Chen, Yaqiang Zhu, Dongyang Xue, Shuai Li, Shiquan Lan, Danlu Wang, Cheng Chen

    Underwater vehicles (UVs) are pivotal for ocean exploration, yet their effectiveness is fundamentally constrained by acoustic performance in noisy and dynamic seas. Self-noise, non-stationary interference, and extreme conditions not only degrade sensing, navigation, and stealth but also cascade into losses in propulsion efficiency, actuation reliability, and control precision. This review provides a system-performance-oriented synthesis of advances across four key areas: bioinspired and intelligent noise reduction materials/structures, active noise control and adaptive signal processing, noise-robust navigation and collaborative localization, and deep learning-enhanced acoustic perception. Key findings indicate that bioinspired surfaces reduce flow noise by ≈5 dB, adaptive filtering improves SNR by up to 20 dB, and distributed robust filtering ensures multi-AUV consistency under uncertainty. These developments collectively establish acoustic performance not as a parallel metric, but as a fundamental enabler and critical bottleneck for the integrated propulsion-actuation-control stack of next-generation UVs. Consequently, this review outlines viable pathways toward high-performance acoustic–mechanical integration.

  • Seal-Inspired Underwater Glider With a Rigid-Flexible Composite Hull

    by Yuhong Liu, Huan Bai, Shihan Deng, Shuhe Liu, Shuxin Wang, Shiquan Lan, Xiaokang Li, Houcun Li, Zhijie Wang

    It is difficult for traditional underwater gliders (UGs) equipped with rigid hulls to compensate for the buoyancy loss caused by seawater density variation and reduce the vibration noise. Inspired by the streamlined shape and soft body of seals, this article develops a bionic UG with appropriate buoyancy compensation and vibration and noise reduction. The seal-inspired underwater glider (SIUG) contains a rigid-flexible composite hull, with the outer flexible silicone rubber shell completely covering the inner rigid hull. A vibration experiment is performed, and the results verify that the proposed hull can obviously suppress the propagation of vibration noise, especially the high-frequency ones. Further, the dynamic models of the SIUG and the traditional rigid UG are established, respectively, to compare their dynamic behaviors. The dynamic simulation results show that the net buoyancy of the SIUG remains almost unchanged in deep water, with obviously smaller fluctuations of pitch angle and velocity. A sea trial in the South China Sea also proves that the SIUG has a good capability of buoyancy compensation in maintaining its net buoyancy. Overall, the SIUG provides a two-in-one solution of buoyancy compensation as well as vibration and noise reduction.


  • Ocean Current-Aided Localization and Navigation for Underwater Gliders With Information Matching Algorithm

    by Runfeng Zhang, Weiqiang Gao, Shaoqiong Yang, Yanhui Wang, Shiquan Lan, Xiuzhu Yang

    The underwater glider (UG) is a new type of long-endurance marine vehicle that is currently widely used in marine environment surveillance. However, the limited capability of underwater communication and the uncertainty of the marine environment leads to a large deviation between the dead-reckoned trajectory and the real trajectory of UG. Therefore, a localization and navigation method based on ocean current data is proposed in this study. Firstly, the working principle and configuration of UG are illustrated, and the dynamic model is also analyzed. Then, the depth-averaged current is derived with motion parameters of UG, and the ocean current data from the Hybrid Coordinate Ocean Model is also introduced and processed. Meanwhile, to make an accurate localization, the DAC is stratified according to the layer weight extracted from the processed ocean current model to obtain layered DAC (LDAC). Subsequently, because the sample intervals of sensors are asynchronous with LDAC, a new matching algorithm based on sample time difference is presented to match the information of sensors and LDAC. Furthermore, the matched data is applied to localization for accurate dead reckoning. Finally, based on the data collected from two experiments, the LDAC-aided localization method proposed in this paper is compared with other benchmark positioning methods, including dynamic model-aided localization, sea current-aided localization, and acoustic beacon-aided localization methods. The results indicate that the proposed new method achieves better localization performance than other benchmark methods. In addition, the proposed method could be applied to other autonomous vehicles with communication constraints.


  • Vibration Analysis of the Free-Falling Microstructure Profiler

    by Yuhong Liu, Yanpeng Yang, Yanhui Wang, Shiquan Lan, Shuxin Wang, Lianhong Zhang

    Free-falling microstructure profiler (FFMP) is the most effective platform for measuring ocean microstructure turbulence. Vibration is the key factor of influencing the accuracy of the measurement of the shear sensor mounted on the leading end of the FFMP. In the present work, vibration behavior of an FFMP called FFMP1000 was studied through fluid–structure interaction (FSI) simulations and field trials. Vibration characteristics and mechanism of the FFMP1000 were also discussed. Results showed that motion of the FFMP was like a compound pendulum oscillation, and was caused by vortex shedding at the trailing end of the FFMP. Empirical formulas used to predict the oscillation of the FFMP were deduced based on the characteristics of motion behavior and confirmed through sea trials. The present achievement provides scientific guidance for designing optimal hydrodynamic hull shape of the FFMP. It is also useful to estimate the low end detection limit of the FFMP and to modify the turbulence kinetic energy dissipation rate during ocean observations.