Danh Manh Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Danh Manh Nguyen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Chulhun Seo
Department of Information and Communication Convergence, Soongsil University, Seoul, South Korea
7 shared publications - Ngoc Duc Au
Department of Information and Communication Convergence, Soongsil University, Seoul, South Korea
3 shared publications - Dang-An Nguyen
Department of Information and Telecommunication Engineering Soongsil University Seoul South Korea
2 shared publications - Ducdung Nguyen
Department of Information and Communication Convergence, Soongsil University, Seoul, South Korea
2 shared publications - Seungmo Hong
School of Electronic Engineering, Soongsil University, Seoul, Korea
2 shared publications - Cuong Danh Do
VinUniversity
1 shared publication
Latest Publications
- Open Access
- 30 April 2026
- Published by Korean Institute of Electromagnetic Engineering and Science in Journal of Electromagnetic Engineering and Science
- Vol. 26 (4) , 329-334
Broadband Circularly Polarized Antenna with Stable Flat-Top Radiation Based on Metasurface
This paper presents a compact broadband circularly polarized antenna based on a metasurface. The antenna is designed to minimize transmission losses in microwave power transfer (MPT) systems while ensuring a stable flat-top radiation pattern for efficient energy transmission. The proposed structure is composed of aperture-coupled feeding and a metasurface in which four-unit cells are sequentially eliminated to enhance the antenna’s circular polarization (CP) characteristic s. The antenna is fabricated and experimentally validated in this work, with measurements indicating strong agreement with the simulation results. Moreover, the antenna demonstrates excellent impedance matching across a wide bandwidth of 22.65% (4.46–5.85 GHz) and broadband CP characteristics with an axial ratio (AR) less than 3 dB over the 4.66–5.88 GHz range. The proposed antenna also maintains a stable flat-top (1-dB) radiation pattern throughout its operational frequency range. At 4.8 GHz, the flat-top beamwidths for the E-plane and H-plane are 58% and 60%, respectively, with a realized gain of 7.5 dBi. At 5.8 GHz, the flat-top beamwidths are higher than 56% in both planes, with a realized gain of 8.2 dBi. The proposed antenna offers superior performance in terms of compactness, a broadband flat-top beam, and broadband CP compared to those developed in previous studies.
- 30 April 2026
- Published by Korean Institute of Electromagnetic Engineering and Science in Journal of Electromagnetic Engineering and Science
- Vol. 26 (4) , 329-334
Open AccessBroadband Circularly Polarized Antenna with Stable Flat-Top Radiation Based on Metasurface
This paper presents a compact broadband circularly polarized antenna based on a metasurface. The antenna is designed to minimize transmission losses in microwave power transfer (MPT) systems while ensuring a stable flat-top radiation pattern for efficient energy transmission. The proposed structure is composed of aperture-coupled feeding and a metasurface in which four-unit cells are sequentially eliminated to enhance the antenna’s circular polarization (CP) characteristic s. The antenna is fabricated and experimentally validated in this work, with measurements indicating strong agreement with the simulation results. Moreover, the antenna demonstrates excellent impedance matching across a wide bandwidth of 22.65% (4.46–5.85 GHz) and broadband CP characteristics with an axial ratio (AR) less than 3 dB over the 4.66–5.88 GHz range. The proposed antenna also maintains a stable flat-top (1-dB) radiation pattern throughout its operational frequency range. At 4.8 GHz, the flat-top beamwidths for the E-plane and H-plane are 58% and 60%, respectively, with a realized gain of 7.5 dBi. At 5.8 GHz, the flat-top beamwidths are higher than 56% in both planes, with a realized gain of 8.2 dBi. The proposed antenna offers superior performance in terms of compactness, a broadband flat-top beam, and broadband CP compared to those developed in previous studies.
- Open Access
- 31 May 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in Journal of Electromagnetic Engineering and Science
- Vol. 25 (3) , 214-221
Efficiency Improvement of a Microwave Power Transfer System with an Integrated Flat-Top Beamwidth Antenna and Rectifier
In this letter a novel rectenna featuring fully integrated rectification within a uniformly radiating antenna for a microwave power transmission system is presented. The proposed structure consists of a magneto-electric ring dipole antenna fed by a pair of parallel lines and a class-F rectifier. For compactness and a low profile, the class-F rectifier was fully integrated into the backside of the antenna’s feeding mechanism while maintaining its uniform power radiation characteristics and impedance matching between the rectifier and antenna at 5.8 GHz. The proposed structure’s overall dimensions are 0.97λ0 × 0.97λ0 × 0.27λ0, and it has been fabricated and measured. The measured results show that the proposed rectenna has a peak conversion efficiency of 79% at 5.8 GHz. Moreover, the proposed rectenna can maintain a uniform voltage of 1.9 V in the diameter range of 50 mm. With its structure and uniform power radiation, the proposed integrated rectenna is well suited for a microwave power transmission system.
- 31 May 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in Journal of Electromagnetic Engineering and Science
- Vol. 25 (3) , 214-221
Open AccessEfficiency Improvement of a Microwave Power Transfer System with an Integrated Flat-Top Beamwidth Antenna and Rectifier
In this letter a novel rectenna featuring fully integrated rectification within a uniformly radiating antenna for a microwave power transmission system is presented. The proposed structure consists of a magneto-electric ring dipole antenna fed by a pair of parallel lines and a class-F rectifier. For compactness and a low profile, the class-F rectifier was fully integrated into the backside of the antenna’s feeding mechanism while maintaining its uniform power radiation characteristics and impedance matching between the rectifier and antenna at 5.8 GHz. The proposed structure’s overall dimensions are 0.97λ0 × 0.97λ0 × 0.27λ0, and it has been fabricated and measured. The measured results show that the proposed rectenna has a peak conversion efficiency of 79% at 5.8 GHz. Moreover, the proposed rectenna can maintain a uniform voltage of 1.9 V in the diameter range of 50 mm. With its structure and uniform power radiation, the proposed integrated rectenna is well suited for a microwave power transmission system.
- 20 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 658-661
High-Efficiency Rectifier With Extended Dynamic Range Based on Adaptive Power Switch and Branch-Line Coupler
This letter presents a novel rectifier design with high-power conversion efficiency (PCE) over an extended dynamic range (DR). The proposed structure employs two power-different subrectifiers which are excited through the output ports of a 3-dB branch-line coupler with the capability of automatically switching from low-power-to-high-power operation mode as the input power increases. In order to adapt such the automated rectification, the low-power rectifier branch is reconfigured with a depletion-mode field-effect transistor (FET) switch being on at low power and off at high power. For optimal operation, losses due to the 3-dB power drop of the coupler’s outputs and the impedance mismatch within the overall power range are minimized based on a reflection mechanism through grounding the isolation port of the coupler that repeatedly reinjects back the reflected power to the processing subrectifier, and then rerectify it for PCE improvement. A Schottky diode-based rectifier is designed and tested for verification at 0.915 GHz. The measured results show that the proposed rectifier keeps PCE above 50% and 30% in the input power range spanning from -1.5 up to 25.5 dBm (27 dB) and from -11 up to 28 dBm (39 dB), respectively, while peak PCE reaches optimal value of 79.2% at 20 dBm.
- 20 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 658-661
High-Efficiency Rectifier With Extended Dynamic Range Based on Adaptive Power Switch and Branch-Line Coupler
This letter presents a novel rectifier design with high-power conversion efficiency (PCE) over an extended dynamic range (DR). The proposed structure employs two power-different subrectifiers which are excited through the output ports of a 3-dB branch-line coupler with the capability of automatically switching from low-power-to-high-power operation mode as the input power increases. In order to adapt such the automated rectification, the low-power rectifier branch is reconfigured with a depletion-mode field-effect transistor (FET) switch being on at low power and off at high power. For optimal operation, losses due to the 3-dB power drop of the coupler’s outputs and the impedance mismatch within the overall power range are minimized based on a reflection mechanism through grounding the isolation port of the coupler that repeatedly reinjects back the reflected power to the processing subrectifier, and then rerectify it for PCE improvement. A Schottky diode-based rectifier is designed and tested for verification at 0.915 GHz. The measured results show that the proposed rectifier keeps PCE above 50% and 30% in the input power range spanning from -1.5 up to 25.5 dBm (27 dB) and from -11 up to 28 dBm (39 dB), respectively, while peak PCE reaches optimal value of 79.2% at 20 dBm.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1395-1398
Design of Compact and Low-Complexity Harmonic-Controlled Dual-Band Rectifier for Wireless Power Transfer
This letter presents a novel methodology for realizing a high-efficiency harmonic-controlled dual-band (dB) rectifier with compactness and low complexity. Specifically, the DB fundamental impedance matching network and the DB harmonic suppression filter are co-designed within a four-transmission lines (TLINs) structure, which reduces the design complexity and the overall circuit size resulting in low insertion loss for power conversion efficiency (PCE) maximization. A prototype is implemented using a Schottky diode model BAT15-03W at two separate frequencies of 2.45 and 5.8 GHz for verification. The measurement results show high peak PCE of $77.8\%$ and $73.9\%$ recorded at 2.34 and 5.62 GHz, respectively, while the realized rectifier has a small size of 39 $\times$ 21 mm. Compared to other state-of-the-art designs, the proposed rectifier exhibits advantages in terms of high PCE and compactness.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1395-1398
Design of Compact and Low-Complexity Harmonic-Controlled Dual-Band Rectifier for Wireless Power Transfer
This letter presents a novel methodology for realizing a high-efficiency harmonic-controlled dual-band (dB) rectifier with compactness and low complexity. Specifically, the DB fundamental impedance matching network and the DB harmonic suppression filter are co-designed within a four-transmission lines (TLINs) structure, which reduces the design complexity and the overall circuit size resulting in low insertion loss for power conversion efficiency (PCE) maximization. A prototype is implemented using a Schottky diode model BAT15-03W at two separate frequencies of 2.45 and 5.8 GHz for verification. The measurement results show high peak PCE of $77.8\%$ and $73.9\%$ recorded at 2.34 and 5.62 GHz, respectively, while the realized rectifier has a small size of 39 $\times$ 21 mm. Compared to other state-of-the-art designs, the proposed rectifier exhibits advantages in terms of high PCE and compactness.
- Open Access
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 76989-76995
A High Gain and Uniform Power Mushroom Antenna Using Metasurface
In this study, we present a simple feed-aperture coupled antenna with a high gain and flat-top radiation pattern for microwave power transmission (MPT) applications involving misalignment. A 4 × 4 mushroom structure is proposed to suppress the back-lobe radiation and to achieve the high gain of the aperture-coupled antenna. Additionally, to improve the flat-top radiation pattern and circular polarization (CP), an array 4 × 4 metasurface is employed to obtain an equal electric field in the propagation direction. The overall dimensions are 2.13λ 0 × 2.13λ 0 × 0.228λ 0 at 5.8 GHz. The measurement results show that the impedance bandwidth of < -10 dB of 5.5 - 6 GHz (8.69 %), a maximum realized left-hand circular polarization (LHCP) gain of 10.4 dBi with flat-top beamwidth (1-dB) of 36° and 38° for E and H plane, respectively. Moreover, the proposed transmitter antenna is tested in a realistic MPT indicating an advantage of radiating uniform power of 10 mW in the diameter range of 80mm.
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 76989-76995
Open AccessA High Gain and Uniform Power Mushroom Antenna Using Metasurface
In this study, we present a simple feed-aperture coupled antenna with a high gain and flat-top radiation pattern for microwave power transmission (MPT) applications involving misalignment. A 4 × 4 mushroom structure is proposed to suppress the back-lobe radiation and to achieve the high gain of the aperture-coupled antenna. Additionally, to improve the flat-top radiation pattern and circular polarization (CP), an array 4 × 4 metasurface is employed to obtain an equal electric field in the propagation direction. The overall dimensions are 2.13λ 0 × 2.13λ 0 × 0.228λ 0 at 5.8 GHz. The measurement results show that the impedance bandwidth of < -10 dB of 5.5 - 6 GHz (8.69 %), a maximum realized left-hand circular polarization (LHCP) gain of 10.4 dBi with flat-top beamwidth (1-dB) of 36° and 38° for E and H plane, respectively. Moreover, the proposed transmitter antenna is tested in a realistic MPT indicating an advantage of radiating uniform power of 10 mW in the diameter range of 80mm.
- Open Access
- 21 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 63997-64004
A Compact Broadband Circularly Polarized Patch Antenna Using Ladder Slots and Grounded Capacitors for MedRadio-Band Applications
This paper presents a compact broadband circularly polarized (CP) implantable antenna at the Medical Device Radio communications Service (MedRadio) band (401-406 MHz). The proposed antenna is designed by utilizing the ladder structure slots along with shorting strategy on the radiating patch, and embedding the chip capacitors loading on the ground plane. The proposed antenna’s performances are tested via numerical simulations in a three-layer phantom model. The prototypes are experimentally measured with minced pork as well as in muscle-mimicking gel, and the results show a good agreement. The experiment results indicated that the proposed CP antenna has a small overall size of 9.5 mm × 9.5 mm × 0.64 mm (57.76 mm 3 ) with a broad impedance matching of 25% from 350 MHz to 469 MHz, a realized gain of -31.2 dBi, and produces a wide axial ratio (AR) bandwidth of 30.5% (123 MHz with ranger from 337 MHz to 460 MHz). Moreover, the maximum specific absorption rate (SAR) value also complies with the IEEE standard safety requirements. To the best of our knowledge, the proposed CP antenna is the compactest dimension with wider impedance matching, and greater gain value (without using superstrate) and obtain CP with widest AR bandwidth compared to previously reported works in the MedRadio band.
- 21 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 63997-64004
Open AccessA Compact Broadband Circularly Polarized Patch Antenna Using Ladder Slots and Grounded Capacitors for MedRadio-Band Applications
This paper presents a compact broadband circularly polarized (CP) implantable antenna at the Medical Device Radio communications Service (MedRadio) band (401-406 MHz). The proposed antenna is designed by utilizing the ladder structure slots along with shorting strategy on the radiating patch, and embedding the chip capacitors loading on the ground plane. The proposed antenna’s performances are tested via numerical simulations in a three-layer phantom model. The prototypes are experimentally measured with minced pork as well as in muscle-mimicking gel, and the results show a good agreement. The experiment results indicated that the proposed CP antenna has a small overall size of 9.5 mm × 9.5 mm × 0.64 mm (57.76 mm 3 ) with a broad impedance matching of 25% from 350 MHz to 469 MHz, a realized gain of -31.2 dBi, and produces a wide axial ratio (AR) bandwidth of 30.5% (123 MHz with ranger from 337 MHz to 460 MHz). Moreover, the maximum specific absorption rate (SAR) value also complies with the IEEE standard safety requirements. To the best of our knowledge, the proposed CP antenna is the compactest dimension with wider impedance matching, and greater gain value (without using superstrate) and obtain CP with widest AR bandwidth compared to previously reported works in the MedRadio band.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (10) , 4502-4510
A 5.8-GHz Rectifier Using Diode-Connected MESFET for Space Solar Power Satellite System
To improve the power handling capability at ground stations of a 5.8-GHz solar space power satellite using microwave power transmission, a power charge-pump meta-semiconductor field-effect transistor (MESFET)-based rectifier is presented in this article. Unlike conventional microwave Schottky diodes, diode-connected MESFETs, whose nonlinear characteristics help them to have a unique current–voltage (I-V) curve that overcomes the limitations of a Schottky diode. Thus, the maximum input power of the proposed rectifier is extended up to 251.2 mW by replacing a Schottky diode with a diode-connected MESFET. Additionally, a class F harmonic processing network is introduced to control the voltage and current waveform at the load of the rectifier. Consequently, the RF-dc conversion efficiency is increased since the power dissipation is limited at the junction resistance of both the drain and the source of the MESFET. Owing to the abnormal characteristics of the diode-connected MESFET, the measured conversion efficiency of our rectifier is approximately 73.2% at 126 mW, and the input power range for rectifier efficiency higher than 50% is between 16 and 224 mW. The proposed rectifier for the space solar power satellite application is demonstrated and verified using a microwave wireless power transmission system.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (10) , 4502-4510
A 5.8-GHz Rectifier Using Diode-Connected MESFET for Space Solar Power Satellite System
To improve the power handling capability at ground stations of a 5.8-GHz solar space power satellite using microwave power transmission, a power charge-pump meta-semiconductor field-effect transistor (MESFET)-based rectifier is presented in this article. Unlike conventional microwave Schottky diodes, diode-connected MESFETs, whose nonlinear characteristics help them to have a unique current–voltage (I-V) curve that overcomes the limitations of a Schottky diode. Thus, the maximum input power of the proposed rectifier is extended up to 251.2 mW by replacing a Schottky diode with a diode-connected MESFET. Additionally, a class F harmonic processing network is introduced to control the voltage and current waveform at the load of the rectifier. Consequently, the RF-dc conversion efficiency is increased since the power dissipation is limited at the junction resistance of both the drain and the source of the MESFET. Owing to the abnormal characteristics of the diode-connected MESFET, the measured conversion efficiency of our rectifier is approximately 73.2% at 126 mW, and the input power range for rectifier efficiency higher than 50% is between 16 and 224 mW. The proposed rectifier for the space solar power satellite application is demonstrated and verified using a microwave wireless power transmission system.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (10) , 2130-2134
Aperture-Coupled Patch Antenna With Flat-Top Beam for Microwave Power Transmission
This letter presents a flat-top radiation transmitter (Tx), which is composed of 2 × 2 array patches connected to the ground plane of the aperture by four shorting vias, which can generate a mushroom structure resulting in back lobe level reduction. The final design exhibits an overall size of 1.93 $\lambda _{0}$ × 1.93 $\lambda _{0}$ × 0.075 $\lambda _{0}$ at 5.8 GHz. The measured results agree well with the simulated results, which achieves a maximum left-hand circular polarization gain of 8.5 dBi with a sidelobe level of $< $ −13.5 dB, and 3 dB beamwidths of 80 $^{\circ }$ in both the E- and H- planes. Moreover, the proposed transmitter is tested with the rectenna showing that a stable received energy of 5.93 mW is obtained with an exciting 1 W input power in case of receiving antenna lateral misalignment of up to 60 mm, which demonstrates feasibility in practical deployment. Compared with the other works, the proposed antenna has the advantage in compactness and wide 3 dB beamwidth.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (10) , 2130-2134
Aperture-Coupled Patch Antenna With Flat-Top Beam for Microwave Power Transmission
This letter presents a flat-top radiation transmitter (Tx), which is composed of 2 × 2 array patches connected to the ground plane of the aperture by four shorting vias, which can generate a mushroom structure resulting in back lobe level reduction. The final design exhibits an overall size of 1.93 $\lambda _{0}$ × 1.93 $\lambda _{0}$ × 0.075 $\lambda _{0}$ at 5.8 GHz. The measured results agree well with the simulated results, which achieves a maximum left-hand circular polarization gain of 8.5 dBi with a sidelobe level of $< $ −13.5 dB, and 3 dB beamwidths of 80 $^{\circ }$ in both the E- and H- planes. Moreover, the proposed transmitter is tested with the rectenna showing that a stable received energy of 5.93 mW is obtained with an exciting 1 W input power in case of receiving antenna lateral misalignment of up to 60 mm, which demonstrates feasibility in practical deployment. Compared with the other works, the proposed antenna has the advantage in compactness and wide 3 dB beamwidth.
- Open Access
- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 134163-134173
A Microwave Power Transmission System Using Sequential Phase Ring Antenna and Inverted Class F Rectenna
A high-efficiency microwave power transmission (MPT) system based on an inverted class F ($\text{F}^{-1 }$ ) rectifier for microwave wireless charging applications is presented in this paper. A left-hand circular polarization (LHCP) transmitting antenna (Tx) is designed based on a modified sequential phase rotation (SPR) divider integrated with a$2\times 2$ array. The proposed Tx exhibits compact size with LHCP maximum gain of 11.85 dBi at 5.8 GHz. Furthermore, the receiver is composed of an LHCP receiving antenna (Rx) and a microwave$\text{F}^{-1}$ rectifier. To realize the power radiated region of the Tx, an Rx with a wide beamwidth for minimizing distance loss is proposed, which has a 3-dB axial ratio (AR) beamwidth of 165.55° and 175.17° in the$x - z$ and$y - z$ planes, respectively. In addition, to improve the RF to DC conversion efficiency ($\eta $ ), the class$\text{F}^{-1}$ harmonic processing network is utilized at the load of the rectifier that can process the voltage and current waveforms without using a DC pass filter. The proposed$\text{F}^{-1}$ rectifier circuit occupies a compact area of$15.3\times12.7$ mm 2 , and it exhibits an average$\eta $ of 50% for the input power range from 4 to 20 dBm with a peak efficiency of 77.9% at 18 dBm. Overall, the experimental results show that our proposed system achieves a maximum power transmission efficiency (PTE) of 8.8% for wirelessly charging low-power multiple devices at a distance of 60–200 mm.- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 134163-134173
Open AccessA Microwave Power Transmission System Using Sequential Phase Ring Antenna and Inverted Class F Rectenna
A high-efficiency microwave power transmission (MPT) system based on an inverted class F ($\text{F}^{-1 }$ ) rectifier for microwave wireless charging applications is presented in this paper. A left-hand circular polarization (LHCP) transmitting antenna (Tx) is designed based on a modified sequential phase rotation (SPR) divider integrated with a$2\times 2$ array. The proposed Tx exhibits compact size with LHCP maximum gain of 11.85 dBi at 5.8 GHz. Furthermore, the receiver is composed of an LHCP receiving antenna (Rx) and a microwave$\text{F}^{-1}$ rectifier. To realize the power radiated region of the Tx, an Rx with a wide beamwidth for minimizing distance loss is proposed, which has a 3-dB axial ratio (AR) beamwidth of 165.55° and 175.17° in the$x - z$ and$y - z$ planes, respectively. In addition, to improve the RF to DC conversion efficiency ($\eta $ ), the class$\text{F}^{-1}$ harmonic processing network is utilized at the load of the rectifier that can process the voltage and current waveforms without using a DC pass filter. The proposed$\text{F}^{-1}$ rectifier circuit occupies a compact area of$15.3\times12.7$ mm 2 , and it exhibits an average$\eta $ of 50% for the input power range from 4 to 20 dBm with a peak efficiency of 77.9% at 18 dBm. Overall, the experimental results show that our proposed system achieves a maximum power transmission efficiency (PTE) of 8.8% for wirelessly charging low-power multiple devices at a distance of 60–200 mm.