Aburpa Avanachari Sivakumar
Research Subjects
Aburpa Avanachari Sivakumar has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Cristian Canales
Department of Mechanical Engineering, Faculty of Engineering, University of Concepción, Concepcion 4070409, Chile
2 shared publications - Erick I. Saavedra Flores
Civil Engineering Department, Faculty of Engineering, University of Santiago of Chile (USACH), Santiago 9170022, Chile
2 shared publications M. Francis Luther King
2 shared publicationsM. Vijayakumar
2 shared publicationsC. Sivakandhan
1 shared publication- Jeen Robert Rb
Department of Mechanical Engineering, Sri Krishna College of Technology, Coimbatore, India
1 shared publication
Latest Publications
- 10 June 2024
- Published by University of the Aegean in Global Nest Journal
- p. 1-9
Environmental emission characteristics of diesel engine performance using biodiesel by cotton and pumpkin seed
The hunt for alternative fuels that may be utilized in place of conventional fuels is intensifying quickly since the availability of fossil fuels is dwindling daily. In this work, biodiesel derived from pumpkin and cotton seed oils is presented for use as diesel engine fuel. Related to diesel, the calorific value of this precise biodiesel is low. In a 4-stroke diesel engine, four mixes (B0, B25, B50, B75 and B100) of biodiesel were evaluated. The engine's emissions and combustion results were contrasted with the diesels. When all blended fuels are related to diesel fuel, the test repercussions illustrate a small increase in the thermal efficiency of the brakes and a decrease in the consumption of fuel specifically for the brake. Emissions of Carbon monoxide and the usage of biodiesel subsequent in a reduction in hydrocarbon emissions and an upsurge in carbon dioxide and nitrogen oxide emissions. The experiment's results showed that biodiesel, which is derived from these seed oils, maybe a useful diesel replacement for compression ignition engines.
- 10 June 2024
- Published by University of the Aegean in Global Nest Journal
- p. 1-9
Environmental emission characteristics of diesel engine performance using biodiesel by cotton and pumpkin seed
The hunt for alternative fuels that may be utilized in place of conventional fuels is intensifying quickly since the availability of fossil fuels is dwindling daily. In this work, biodiesel derived from pumpkin and cotton seed oils is presented for use as diesel engine fuel. Related to diesel, the calorific value of this precise biodiesel is low. In a 4-stroke diesel engine, four mixes (B0, B25, B50, B75 and B100) of biodiesel were evaluated. The engine's emissions and combustion results were contrasted with the diesels. When all blended fuels are related to diesel fuel, the test repercussions illustrate a small increase in the thermal efficiency of the brakes and a decrease in the consumption of fuel specifically for the brake. Emissions of Carbon monoxide and the usage of biodiesel subsequent in a reduction in hydrocarbon emissions and an upsurge in carbon dioxide and nitrogen oxide emissions. The experiment's results showed that biodiesel, which is derived from these seed oils, maybe a useful diesel replacement for compression ignition engines.
- 17 March 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (9) , 1143-1174
A complete overview of self-healing composites including its models in aeronautical systems
1. Lately, self-healer substances have drawn a lot of interest. In some cases, automobile damages may have been mended or fixed by themselves to bring back the shining aspect. It is comparable to h...
- 17 March 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (9) , 1143-1174
A complete overview of self-healing composites including its models in aeronautical systems
1. Lately, self-healer substances have drawn a lot of interest. In some cases, automobile damages may have been mended or fixed by themselves to bring back the shining aspect. It is comparable to h...
- 13 January 2024
- Published by University of the Aegean in Global Nest Journal
- Vol. 26 (3)
Exploring the effects of eco-friendly and biodegradable biocomposite incorporating eggshell and walnut powder as fillers
Composites gain utility when filler materials are incorporated. The qualities of the material are changed when filler components are added. In recent years, the use of bio-based components in polymers and polymer composites has significantly increased. Agricultural wastes are employed in this case as filler component to create bioplastic composites since they are inexpensive, plentiful, and easily accessible. By varying the weight ratios of Eggshell (ES) powder and Walnut shell (WS) powder added to the plasticized PLA, bioplastic composite samples are created. Epoxidized soybean oil (5wt%) is used to create the plastic. The obtained bioplastic particles are then subjected to additional processing by being shaped into dog-bone-shaped samples and tested mechanically and thermally. Mechanical testing, including Tensile, Charpy Impact, and Flexural tests, revealed that the PLA possessed inferior properties to those of virgin PLA. The qualities of plasticized PLA-ES composite, however, performed better than those of plasticized PLA-WS composite.
- 13 January 2024
- Published by University of the Aegean in Global Nest Journal
- Vol. 26 (3)
Exploring the effects of eco-friendly and biodegradable biocomposite incorporating eggshell and walnut powder as fillers
Composites gain utility when filler materials are incorporated. The qualities of the material are changed when filler components are added. In recent years, the use of bio-based components in polymers and polymer composites has significantly increased. Agricultural wastes are employed in this case as filler component to create bioplastic composites since they are inexpensive, plentiful, and easily accessible. By varying the weight ratios of Eggshell (ES) powder and Walnut shell (WS) powder added to the plasticized PLA, bioplastic composite samples are created. Epoxidized soybean oil (5wt%) is used to create the plastic. The obtained bioplastic particles are then subjected to additional processing by being shaped into dog-bone-shaped samples and tested mechanically and thermally. Mechanical testing, including Tensile, Charpy Impact, and Flexural tests, revealed that the PLA possessed inferior properties to those of virgin PLA. The qualities of plasticized PLA-ES composite, however, performed better than those of plasticized PLA-WS composite.
- Open Access
Mechanical Behaviour and Impact of Various Fibres Embedded with Eggshell Powder Epoxy Resin Biocomposite
Natural fiber composites are becoming an alternate material to synthetic fiber composites, and the use of eggshell bio-filler has been explored in polymer composites as environmental protection. Jute, coir, and sisal fibers were utilized in this research to make composites out of natural fibers. Polymer composites were made using epoxy resin with different amounts of eggshell powder (ESP) as fillers (2%, 4%, 6%, 8%, and 10% of weight). The mechanical and biodegradability properties of the synthesized composites were investigated. The testing results showed that composites with an optimum percentage of 6% ESP as filler improved mechanical characteristics significantly in all three fiber composites. Among the three fibers, coir fiber with 6% ESP added showed a substantial increase in tensile, flexural, impact, and hardness strength properties by 34.64%, 48.50%, 33.33%, and 35.03%, respectively. In addition, the percentage weight loss of coir fiber composites at 9 weeks is noteworthy in terms of biodegradability testing. As a result, epoxy composites containing eggshell fillers could be employed in applications requiring better tensile, flexural, impact, and hardness strength.
Open AccessMechanical Behaviour and Impact of Various Fibres Embedded with Eggshell Powder Epoxy Resin Biocomposite
Natural fiber composites are becoming an alternate material to synthetic fiber composites, and the use of eggshell bio-filler has been explored in polymer composites as environmental protection. Jute, coir, and sisal fibers were utilized in this research to make composites out of natural fibers. Polymer composites were made using epoxy resin with different amounts of eggshell powder (ESP) as fillers (2%, 4%, 6%, 8%, and 10% of weight). The mechanical and biodegradability properties of the synthesized composites were investigated. The testing results showed that composites with an optimum percentage of 6% ESP as filler improved mechanical characteristics significantly in all three fiber composites. Among the three fibers, coir fiber with 6% ESP added showed a substantial increase in tensile, flexural, impact, and hardness strength properties by 34.64%, 48.50%, 33.33%, and 35.03%, respectively. In addition, the percentage weight loss of coir fiber composites at 9 weeks is noteworthy in terms of biodegradability testing. As a result, epoxy composites containing eggshell fillers could be employed in applications requiring better tensile, flexural, impact, and hardness strength.
- Open Access
- 7 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16373
Simulation of Land Use/Land Cover Dynamics Using Google Earth Data and QGIS: A Case Study on Outer Ring Road, Southern India
The land use and land cover change dynamics is in par with the increasing growth of urban developments and associated sprawl. The objective of the study is to quantify such land cover changes caused due to the urban expansion along the outer ring road using Remote Sensing and GIS. The land cover maps are created for four segments namely Chikkarayapuram, Nazarathpettai, Meppur, and Perungalathur for the years of 2009, 2012, and 2016, respectively. The land cover maps are analyzed for changes among seven classes, namely agriculture, barren land, residential units, industry, water body, other vegetation, and marshland (swamp). Further, the land cover maps of the four segments are analyzed for changes in terms of spatiotemporal aspects (area-based land cover change), environmental aspects (green cover change), and economical factors. The urban growth of the Chikkarayapuram, Nazarathpettai, Meppur, and Perungalathur segment along the outer ring road corridor in the years 2009, 2012, and 2016 are (5.16%, 20.10%, 7.14%, and 12.63%), (14.31%, 30.62%, 13.9%, and 22.18%), and (19.67%, 33.1%, 23.22%, and 40.27%), respectively. The urban areas have increased from 2009 to 2016 by 20, 76,530 sq. m. The agriculture regions have been reduced from 2009 to 2016 by 12, 62,700 sq. m. Besides, using the MOLUSCE plugin in open-source GIS (QGIS), simulated maps for the year 2022 were created based on the land cover maps of the three years (2009, 2012, and 2016) which are then validated with the ground-truth points obtained from Google Earth. The scope of the study utilization of Google Earth Engine (GEE) and automated feature extraction algorithms for predictive analysis.
- 7 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16373
Open AccessSimulation of Land Use/Land Cover Dynamics Using Google Earth Data and QGIS: A Case Study on Outer Ring Road, Southern India
The land use and land cover change dynamics is in par with the increasing growth of urban developments and associated sprawl. The objective of the study is to quantify such land cover changes caused due to the urban expansion along the outer ring road using Remote Sensing and GIS. The land cover maps are created for four segments namely Chikkarayapuram, Nazarathpettai, Meppur, and Perungalathur for the years of 2009, 2012, and 2016, respectively. The land cover maps are analyzed for changes among seven classes, namely agriculture, barren land, residential units, industry, water body, other vegetation, and marshland (swamp). Further, the land cover maps of the four segments are analyzed for changes in terms of spatiotemporal aspects (area-based land cover change), environmental aspects (green cover change), and economical factors. The urban growth of the Chikkarayapuram, Nazarathpettai, Meppur, and Perungalathur segment along the outer ring road corridor in the years 2009, 2012, and 2016 are (5.16%, 20.10%, 7.14%, and 12.63%), (14.31%, 30.62%, 13.9%, and 22.18%), and (19.67%, 33.1%, 23.22%, and 40.27%), respectively. The urban areas have increased from 2009 to 2016 by 20, 76,530 sq. m. The agriculture regions have been reduced from 2009 to 2016 by 12, 62,700 sq. m. Besides, using the MOLUSCE plugin in open-source GIS (QGIS), simulated maps for the year 2022 were created based on the land cover maps of the three years (2009, 2012, and 2016) which are then validated with the ground-truth points obtained from Google Earth. The scope of the study utilization of Google Earth Engine (GEE) and automated feature extraction algorithms for predictive analysis.
- 10 November 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 74, 49-52
Study of tensile properties on natural fiber polymer laminated composite
- 10 November 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 74, 49-52
Study of tensile properties on natural fiber polymer laminated composite
- Open Access
- 6 October 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (19) , 12732
Development of Thermoplastic Cassava Starch Composites with Banana Leaf Fibre
Growing environmental concerns have heightened interest in the development of environmentally friendly materials. The purpose of this study is to evaluate how the mechanical and thermal properties of thermoplastic cassava starch (TPCS) are affected by the presence of banana leaf fibre (BLF). By incorporating between 10% and 80% by weight of banana leaf fibre into the TPCS matrix, the biocomposites were created. The thermal and mechanical parameters of the samples were determined. The results revealed that the material’s flexural and tensile characteristics improved significantly, with 50% BLF content in the matrix achieving the highest strength of 20.86 MPa, a flexural strength of 32 MPa, and tensile modulus values. Thermogravimetric examination observed that the addition of BLF improved the material’s thermal stability. The Scanning Electron Microscopy (SEM) morphological tests demonstrated an even spread of banana leaf fibre and a matrix with strong adhesion, which improved the mechanical properties of the biocomposites. The Fourier Transform Infrared Spectroscopy (FT-IR) testing, which confirmed the biocomposite presence of O-H bonds, also confirmed the strong intermolecular hydrogen bonding between TPCS and banana leaf fibre.
- 6 October 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (19) , 12732
Open AccessDevelopment of Thermoplastic Cassava Starch Composites with Banana Leaf Fibre
Growing environmental concerns have heightened interest in the development of environmentally friendly materials. The purpose of this study is to evaluate how the mechanical and thermal properties of thermoplastic cassava starch (TPCS) are affected by the presence of banana leaf fibre (BLF). By incorporating between 10% and 80% by weight of banana leaf fibre into the TPCS matrix, the biocomposites were created. The thermal and mechanical parameters of the samples were determined. The results revealed that the material’s flexural and tensile characteristics improved significantly, with 50% BLF content in the matrix achieving the highest strength of 20.86 MPa, a flexural strength of 32 MPa, and tensile modulus values. Thermogravimetric examination observed that the addition of BLF improved the material’s thermal stability. The Scanning Electron Microscopy (SEM) morphological tests demonstrated an even spread of banana leaf fibre and a matrix with strong adhesion, which improved the mechanical properties of the biocomposites. The Fourier Transform Infrared Spectroscopy (FT-IR) testing, which confirmed the biocomposite presence of O-H bonds, also confirmed the strong intermolecular hydrogen bonding between TPCS and banana leaf fibre.
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 50, 1516-1521
Thermal performance of a double-glazed window integrated with a phase change material (PCM)
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 50, 1516-1521
Thermal performance of a double-glazed window integrated with a phase change material (PCM)
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 50, 861-866
Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 50, 861-866
Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach