Hind Barghash
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hind Barghash has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Kenneth Eloghene Okedu
School of Information Technology and Engineering, Melbourne Institute of Technology, Melbourne, VIC 3000, Australia
7 shared publications Kenneth E. Okedu
Department of Electrical and Electronic Engineering, Nisantasi University, Istanbul, Turkey
3 shared publications- Ahmed Hadidi
German University of Technology in Oman
1 shared publication Aisha Al Balushi
Department of Engineering, German University of Technology, Al Athaibah, Oman
1 shared publicationAli Al-Alawi
1 shared publicationAli Al-Humairi
Department of Computer Science, German University of Technology
1 shared publication
Latest Publications
- Open Access
- 22 July 2026
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 14, 1818122
Machine learning based prediction and parameters optimization for biohydrogen gas production
Hydrogen production through the dark fermentation pathway offers an energy recovery alternative via wastewater utilization. The study hybridizes experimental and machine-learning investigations to model and optimize the hydrogen yield through seven major operational variables. Four regression models-one each of Support Vector Machine, Decision Tree, Random Forest, and Neural Network are developed and evaluated through rigorous preprocessing and hyperparameter tuning. The Random Forest turned out to be the best-performing model, offering an R 2 of 0.8006 and an accuracy of 0.9171. A differential evolution algorithm was then employed, ranging over the input parameters, to search for the optimum conditions, with the predicted maximum hydrogen yield set at 0.9361 (L H2/L media/hr). These findings establish the application of Machine Learning (ML) in predicting and establishing the optimum conditions for bio-hydrogen production, thus providing a scalable platform for the environmental recovery of energy from wastewater treatment processes.
- 22 July 2026
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 14, 1818122
Open AccessMachine learning based prediction and parameters optimization for biohydrogen gas production
Hydrogen production through the dark fermentation pathway offers an energy recovery alternative via wastewater utilization. The study hybridizes experimental and machine-learning investigations to model and optimize the hydrogen yield through seven major operational variables. Four regression models-one each of Support Vector Machine, Decision Tree, Random Forest, and Neural Network are developed and evaluated through rigorous preprocessing and hyperparameter tuning. The Random Forest turned out to be the best-performing model, offering an R 2 of 0.8006 and an accuracy of 0.9171. A differential evolution algorithm was then employed, ranging over the input parameters, to search for the optimum conditions, with the predicted maximum hydrogen yield set at 0.9361 (L H2/L media/hr). These findings establish the application of Machine Learning (ML) in predicting and establishing the optimum conditions for bio-hydrogen production, thus providing a scalable platform for the environmental recovery of energy from wastewater treatment processes.
- Open Access
- 7 August 2024
- Published by Elsevier in Results in Engineering
- Vol. 23
Achieving decarbonization considering green hydrogen production: Case study of Oman
- 7 August 2024
- Published by Elsevier in Results in Engineering
- Vol. 23
Open AccessAchieving decarbonization considering green hydrogen production: Case study of Oman
- Open Access
- 25 November 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 1046556
Cost benefit analysis for green hydrogen production from treated effluent: The case study of Oman
Recently, the management of water and wastewater is gaining attention worldwide as a way of conserving the natural resources on the planet. The traditional wastewater treatment in Oman is such that the treated effluent produced is only reused for unfeasible purposes such as landscape irrigation, cooling, or disposed of in the sea. Introducing more progressive reuse applications can result in achieving a circular economy by considering treated effluent as a source of producing new products. Accordingly, wastewater treatment plants can provide feedstock for green hydrogen production processes. The involvement of the wastewater industry in the green pathway of production scores major points in achieving decarbonization. In this paper, the technical and economic feasibility of green hydrogen production in Oman was carried out using a new technique that would help explore the benefits of the treated effluent from wastewater treatment in Oman. The feasibility study was conducted using the Al Ansab sewage treatment plant in the governate of Muscat in Wilayat (region), Bousher. The results have shown that the revenue from Al Ansab STP in a conventional case is 7.02 million OMR/year, while sustainable alternatives to produce hydrogen from the Proton Exchange Membrane (PEM) electrolyzer system for two cases with capacities of 1,500 kg H2/day and 50,000 kg H2/day, would produce revenue of 8.30 million OMR/year and 49.73 million OMR/year, respectively.
- 25 November 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 1046556
Open AccessCost benefit analysis for green hydrogen production from treated effluent: The case study of Oman
Recently, the management of water and wastewater is gaining attention worldwide as a way of conserving the natural resources on the planet. The traditional wastewater treatment in Oman is such that the treated effluent produced is only reused for unfeasible purposes such as landscape irrigation, cooling, or disposed of in the sea. Introducing more progressive reuse applications can result in achieving a circular economy by considering treated effluent as a source of producing new products. Accordingly, wastewater treatment plants can provide feedstock for green hydrogen production processes. The involvement of the wastewater industry in the green pathway of production scores major points in achieving decarbonization. In this paper, the technical and economic feasibility of green hydrogen production in Oman was carried out using a new technique that would help explore the benefits of the treated effluent from wastewater treatment in Oman. The feasibility study was conducted using the Al Ansab sewage treatment plant in the governate of Muscat in Wilayat (region), Bousher. The results have shown that the revenue from Al Ansab STP in a conventional case is 7.02 million OMR/year, while sustainable alternatives to produce hydrogen from the Proton Exchange Membrane (PEM) electrolyzer system for two cases with capacities of 1,500 kg H2/day and 50,000 kg H2/day, would produce revenue of 8.30 million OMR/year and 49.73 million OMR/year, respectively.
- Open Access
Life-Cycle Assessment Study for Bio-Hydrogen Gas Production from Sewage Treatment Plants Using Solar PVs
Currently, there is a global challenge of water scarcity due to climate change, rising temperatures, and other factors. One way to address this growing global challenge is by implementing technology to treat polluted water by reusing it in areas such as irrigation, cooling, and energy production, based on bio-hydrogen gas. Hydrogen gas can be produced by several methods, including dark fermentation. In this study, hydrogen gas was produced by 1L of sludge and Treated Effluent (TE) with several methods, using a reactor with a volume of 0.96 H2 L/L media. The Life-Cycle Impact Assessment (LCIA) process was used to study resource depletion, the ecosystem, and human impacts, and efforts were made to reduce the negative impacts by implementing several solutions. In this study, OpenLCA software was used as a tool for calculating the impacts, along with the ecoinvent database. Further analysis was carried out by comparing the LCIA with and without the use of solar energy. The results show that implementing hydrogen gas production with a solar energy system will help to obtain the best solution and reduce the carbon footprint, with 1.12 × 104 kg CO2 equivalent and a water depletion of 2.83 × 104 m3.
Open AccessLife-Cycle Assessment Study for Bio-Hydrogen Gas Production from Sewage Treatment Plants Using Solar PVs
Currently, there is a global challenge of water scarcity due to climate change, rising temperatures, and other factors. One way to address this growing global challenge is by implementing technology to treat polluted water by reusing it in areas such as irrigation, cooling, and energy production, based on bio-hydrogen gas. Hydrogen gas can be produced by several methods, including dark fermentation. In this study, hydrogen gas was produced by 1L of sludge and Treated Effluent (TE) with several methods, using a reactor with a volume of 0.96 H2 L/L media. The Life-Cycle Impact Assessment (LCIA) process was used to study resource depletion, the ecosystem, and human impacts, and efforts were made to reduce the negative impacts by implementing several solutions. In this study, OpenLCA software was used as a tool for calculating the impacts, along with the ecoinvent database. Further analysis was carried out by comparing the LCIA with and without the use of solar energy. The results show that implementing hydrogen gas production with a solar energy system will help to obtain the best solution and reduce the carbon footprint, with 1.12 × 104 kg CO2 equivalent and a water depletion of 2.83 × 104 m3.
- Open Access
- 9 February 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 825728
Sustainable Waste Management Strategies for Effective Energy Utilization in Oman: A Review
Due to the adverse effect of energy production from traditional fossil fuels, the move toward renewable and sustainable energy has become imperative. The waste disposal sector offers hope toward environmental sustainability and potential to generate strong income for any economy. The region of the Gulf Cooperation Council (GCC) member countries in the Middle East generates the highest quantity of municipal waste per capita, compared to other countries globally. In the GCC region, waste is usually just dumped at different landfill stations. Effective waste management is imperative for environmental protection and sustainable development. This article presents a review of the sustainable waste management strategies in Oman, in line with the United Nations goal on environmental management of waste. The current waste management strategies in Oman were discussed, and various waste-to-energy (WTE) technologies were proposed. These proposed WTE strategies would help in effective waste management in Oman and also in increasing the power grid capability. The salient part of this article is an overview of the ability of using landfill leachate as feedstock to produce clean and green hydrogen gas using different photo-fermentation processes. The production of hydrogen using single photo-fermentation process using landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrates such as sucrose, glucose, and landfill leachate was investigated by utilizing a batch bioreactor and anaerobic conditions at controlled temperature, different initial pH, and heat treatment temperature range. Furthermore, a prototype model for the optimization of the inoculum size and the substrate was proposed with 2-level factorial design using Design Expert. The data gathering for this study was carried out by investigating different regions in Oman having the lowest and highest waste produce, the average annual waste for the different governorates, and the total amount of waste for five consecutive years (2015–2020), for the various engineered landfills. The cost of managing waste in the different governorates of Oman was presented, considering the average annual waste produced, in various regions of the country for the duration of the study. Furthermore, some challenges and opportunities in carrying out effective waste management in Oman were addressed.
- 9 February 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 825728
Open AccessSustainable Waste Management Strategies for Effective Energy Utilization in Oman: A Review
Due to the adverse effect of energy production from traditional fossil fuels, the move toward renewable and sustainable energy has become imperative. The waste disposal sector offers hope toward environmental sustainability and potential to generate strong income for any economy. The region of the Gulf Cooperation Council (GCC) member countries in the Middle East generates the highest quantity of municipal waste per capita, compared to other countries globally. In the GCC region, waste is usually just dumped at different landfill stations. Effective waste management is imperative for environmental protection and sustainable development. This article presents a review of the sustainable waste management strategies in Oman, in line with the United Nations goal on environmental management of waste. The current waste management strategies in Oman were discussed, and various waste-to-energy (WTE) technologies were proposed. These proposed WTE strategies would help in effective waste management in Oman and also in increasing the power grid capability. The salient part of this article is an overview of the ability of using landfill leachate as feedstock to produce clean and green hydrogen gas using different photo-fermentation processes. The production of hydrogen using single photo-fermentation process using landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrates such as sucrose, glucose, and landfill leachate was investigated by utilizing a batch bioreactor and anaerobic conditions at controlled temperature, different initial pH, and heat treatment temperature range. Furthermore, a prototype model for the optimization of the inoculum size and the substrate was proposed with 2-level factorial design using Design Expert. The data gathering for this study was carried out by investigating different regions in Oman having the lowest and highest waste produce, the average annual waste for the different governorates, and the total amount of waste for five consecutive years (2015–2020), for the various engineered landfills. The cost of managing waste in the different governorates of Oman was presented, considering the average annual waste produced, in various regions of the country for the duration of the study. Furthermore, some challenges and opportunities in carrying out effective waste management in Oman were addressed.
- Open Access
- 19 January 2022
- Published by IWA Publishing in Journal of Water Reuse and Desalination
- Vol. 12 (1) , 78-91
Modeling and optimization of process parametric interaction during high-rate anaerobic digestion of recycled paper mill wastewater using the response surface methodology
This study carried out the anaerobic digestion of recycled paper mill wastewater (RPMW) in a high-rate novel anaerobic baffled reactor. The parametric interaction between influent chemical oxygen demand (CODin) and hydraulic retention time (HRT) was modeled, and process responses were optimized by the response surface methodology (RSM) using a three-level factorial design. The results showed that the optimal condition was determined at CODin of 4,000 mg/L and HRT of 2 days and predicted values for COD removal, biochemical oxygen demand (BOD) removal, lignin removal, CH4 content, and CH4 production were found to be 94%, 98%, 68%, 85%, and 20.8 L CH4/d, respectively. According to the statistical analysis of the RSM, all models were significant with very low probability values (from 0.0045 to <0.0001). The parametric interaction showed that increasing the CODin positively influenced the COD, BOD, and lignin removal efficiencies, effluent alkalinity, and methane content and production but was unfavorable for pH and effluent volatile fatty acid (VFA). Shortening the HRT negatively affected the COD, BOD, and lignin removal efficiencies, pH level, alkalinity, and methane content and production, and increased the VFA effluent concentration. The optimal conditions were established at 4,000 mg/L COD and HRT of 2 days, corresponding to the predicted COD, BOD, and lignin removal efficiencies of 91, 98, and 71%, respectively, whereas 28 mg/L of VFA and 0.125 L of CH4/g CODremoved were generated.
- 19 January 2022
- Published by IWA Publishing in Journal of Water Reuse and Desalination
- Vol. 12 (1) , 78-91
Open AccessModeling and optimization of process parametric interaction during high-rate anaerobic digestion of recycled paper mill wastewater using the response surface methodology
This study carried out the anaerobic digestion of recycled paper mill wastewater (RPMW) in a high-rate novel anaerobic baffled reactor. The parametric interaction between influent chemical oxygen demand (CODin) and hydraulic retention time (HRT) was modeled, and process responses were optimized by the response surface methodology (RSM) using a three-level factorial design. The results showed that the optimal condition was determined at CODin of 4,000 mg/L and HRT of 2 days and predicted values for COD removal, biochemical oxygen demand (BOD) removal, lignin removal, CH4 content, and CH4 production were found to be 94%, 98%, 68%, 85%, and 20.8 L CH4/d, respectively. According to the statistical analysis of the RSM, all models were significant with very low probability values (from 0.0045 to <0.0001). The parametric interaction showed that increasing the CODin positively influenced the COD, BOD, and lignin removal efficiencies, effluent alkalinity, and methane content and production but was unfavorable for pH and effluent volatile fatty acid (VFA). Shortening the HRT negatively affected the COD, BOD, and lignin removal efficiencies, pH level, alkalinity, and methane content and production, and increased the VFA effluent concentration. The optimal conditions were established at 4,000 mg/L COD and HRT of 2 days, corresponding to the predicted COD, BOD, and lignin removal efficiencies of 91, 98, and 71%, respectively, whereas 28 mg/L of VFA and 0.125 L of CH4/g CODremoved were generated.
- Open Access
- 17 November 2021
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 9
Bio-Hydrogen Production Using Landfill Leachate Considering Different Photo-Fermentation Processes
Recently, it has become imperative to find new sustainable and renewable sources of energy, in order to avoid dependence on non-renewable traditional energy resources. This would help to overcome the depleting of natural resources for energy production. Hydrogen gas production using biological processes is one of the most attractive solutions in this regard, due to its high energy content and ecofriendly nature. Production of hydrogen using single photo-fermentation process and landfill leachate as substrate was carried out in this paper, by utilizing batch bio-reactor and anaerobic conditions. The pH value and temperature, play an essential role in a bio-hydrogen production process. Thus, in this study, the pH values considered were 6, 6.5, and 7.2, respectively, at a controlled temperature of 37 ± 1°C. This study investigated various schemes that have the possibility of producing hydrogen using; landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrate such as sucrose and glucose. All experiments were conducted with and without mixing, for effective comparative study. Heat and pH pretreatment were applied in each experiment with the objectives of decreasing the activities of methane-producing bacteria and enhancing the activities of hydrogen-producing bacteria. The hydraulic retention time used in this study was 48 h, in order to obtain optimal performance of the schemes employed. Analysis of liquid leachate was performed for each experiment, and based on the obtained results, the maximum yield of hydrogen produced was 5,754 ml H2/L, with a medium pH scale of 6.0, fermentation temperature of 37 ± 1°C and constant mixing speed of 100 rpm.
- 17 November 2021
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 9
Open AccessBio-Hydrogen Production Using Landfill Leachate Considering Different Photo-Fermentation Processes
Recently, it has become imperative to find new sustainable and renewable sources of energy, in order to avoid dependence on non-renewable traditional energy resources. This would help to overcome the depleting of natural resources for energy production. Hydrogen gas production using biological processes is one of the most attractive solutions in this regard, due to its high energy content and ecofriendly nature. Production of hydrogen using single photo-fermentation process and landfill leachate as substrate was carried out in this paper, by utilizing batch bio-reactor and anaerobic conditions. The pH value and temperature, play an essential role in a bio-hydrogen production process. Thus, in this study, the pH values considered were 6, 6.5, and 7.2, respectively, at a controlled temperature of 37 ± 1°C. This study investigated various schemes that have the possibility of producing hydrogen using; landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrate such as sucrose and glucose. All experiments were conducted with and without mixing, for effective comparative study. Heat and pH pretreatment were applied in each experiment with the objectives of decreasing the activities of methane-producing bacteria and enhancing the activities of hydrogen-producing bacteria. The hydraulic retention time used in this study was 48 h, in order to obtain optimal performance of the schemes employed. Analysis of liquid leachate was performed for each experiment, and based on the obtained results, the maximum yield of hydrogen produced was 5,754 ml H2/L, with a medium pH scale of 6.0, fermentation temperature of 37 ± 1°C and constant mixing speed of 100 rpm.
- Open Access
- 4 June 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Corrigendum: Enhancing the Transient State Performance of Permanent Magnet Synchronous Generator Based Variable Speed Wind Turbines Using Power Converters Excitation Parameters
Corrigendum: Enhancing the Transient State Performance of Permanent Magnet Synchronous Generator Based Variable Speed Wind Turbines Using Power Converters Excitation Parameters
- 4 June 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Open AccessCorrigendum: Enhancing the Transient State Performance of Permanent Magnet Synchronous Generator Based Variable Speed Wind Turbines Using Power Converters Excitation Parameters
Corrigendum: Enhancing the Transient State Performance of Permanent Magnet Synchronous Generator Based Variable Speed Wind Turbines Using Power Converters Excitation Parameters
- Open Access
- 26 May 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Corrigendum: Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation
Corrigendum: Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation Name of all authors as they appear in the published original article (If correcting author names please put the correct spelling. If adding authors, please include additional authors.) Kenneth E. Okedu1†and Hind F. A. Barghash Affiliations of all authors as they appear in the published original version of the article (If correcting affiliations please put the correct version. If adding affiliations, please include additional affiliations). 1Department of Electrical and Communication Engineering, National University of Science and Technology, Muscat, Oman 1Department of Electrical and Electronic Engineering, Nisantasi University, Istanbul, Turkey 1Department of Electrical and Electronic Engineering, Kitami Institute of Technology, Hokkaido, Japan, 2Department of Engineering, Germany University of Technology (GUtech), Muscat, Oman * Correspondence: email of the corresponding author from the original version of the article hind.barghash@gutech.edu.om Keywords: taken from the original version of the article. grid frequency, wind energy, power grids, loads, renewable energy Corrigendum on: full citation of the original version of the article. Okedu KE and Barghash HFA (2021) Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation. Front. Energy Res. 8:606019doi:10.3389/fenrg.2020.606019 Please pick the most relevant text template(s) (delete all others) and edit as necessary. Additional Affiliation(s) In the published article, there was an error regarding the affiliation(s) for **Kenneth E. Okedu**. As well as having affiliation(s) **1 **, they should also have **1Department of Electrical and Communication Engineering, National University of Science and Technology, Muscat, Oman, 1Department of Electrical and Electronic Engineering, Nisantasi University, Istanbul, Turkey**. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
- 26 May 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Open AccessCorrigendum: Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation
Corrigendum: Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation Name of all authors as they appear in the published original article (If correcting author names please put the correct spelling. If adding authors, please include additional authors.) Kenneth E. Okedu1†and Hind F. A. Barghash Affiliations of all authors as they appear in the published original version of the article (If correcting affiliations please put the correct version. If adding affiliations, please include additional affiliations). 1Department of Electrical and Communication Engineering, National University of Science and Technology, Muscat, Oman 1Department of Electrical and Electronic Engineering, Nisantasi University, Istanbul, Turkey 1Department of Electrical and Electronic Engineering, Kitami Institute of Technology, Hokkaido, Japan, 2Department of Engineering, Germany University of Technology (GUtech), Muscat, Oman * Correspondence: email of the corresponding author from the original version of the article hind.barghash@gutech.edu.om Keywords: taken from the original version of the article. grid frequency, wind energy, power grids, loads, renewable energy Corrigendum on: full citation of the original version of the article. Okedu KE and Barghash HFA (2021) Enhanced Dynamic Behaviour of Grid Connected Wind Farms in Load Participation and Frequency Regulation. Front. Energy Res. 8:606019doi:10.3389/fenrg.2020.606019 Please pick the most relevant text template(s) (delete all others) and edit as necessary. Additional Affiliation(s) In the published article, there was an error regarding the affiliation(s) for **Kenneth E. Okedu**. As well as having affiliation(s) **1 **, they should also have **1Department of Electrical and Communication Engineering, National University of Science and Technology, Muscat, Oman, 1Department of Electrical and Electronic Engineering, Nisantasi University, Istanbul, Turkey**. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.