HSHongkai Shi

Hongkai Shi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongkai Shi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Marine quasi-geoid enhancement from SWOT wide-swath data and its mapping of mean dynamic topography over island areas

    by Yihao Wu, Ole Baltazar Andersen, Adili Abulaitijiang, Bin Wang, Xiufeng He, Hongkai Shi, Zhicai Luo, Haihong Wang

    The lack of marine gravimetric measurements and the presence of severely contaminated altimetry data pose multiple challenges in high-quality quasi-geoid (QG) and mean dynamic topography (MDT) determination over islands, where the application of nadir altimetry alone is inadequate. We explore the potential for regional enhancement using wide-swath data from the Surface Water and Ocean Topography (SWOT) mission. Numerical experiments over the Paracel Islands in South China Sea underscore the superiority of using SWOT data in QG/MDT computation. Comparisons with the airborne gravimetry-derived QG reveal that the Root Mean Square Errors (RMSEs) of QGs derived from the SWOT data are reduced by 38.24–60.90% compared to those derived solely from nadir altimetry. The QG profiles retrieved from the Sentinel-3A/B altimetry using the fully-focused SAR technology are effective in discriminating the quality of different QGs near islands. The RMSEs of SWOT-derived QGs constitute reductions of 6.27–17.52% compared to those computed from nadir altimetry alone. Notable improvements up to 4 cm are observed when Sentinel-3A/B tracks approached islands. The mutual comparison of the QGs computed from the SWOT gravity anomaly (GRA) and vertical gravity gradient (VGG) data suggests that the VGG-derived QG has improved quality, and the utilization of VGG recovers more small-scale signals. The SWOT-derived MDTs reduce the bubble-like errors up to several centimeters compared to those computed exclusively using nadir altimetry. Our findings highlight that utilizing SWOT data enables the acquisition of an accurate QG/MDT with an RMSE less than 1 cm compared to that derived from airborne gravimetry.


  • High-Resolution Quasi-Geoid Recovery Over Coastal Zone by Using Airborne Gravity Gradient Data

    by Yihao Wu, Ole Baltazar Andersen, Adili Abulaitijiang, Zhicai Luo, Haihong Wang, Xiufeng He, Hongkai Shi, Wenhao Li

    The potential of using airborne gravity gradient tensor (GGT) for coastal quasi-geoid (QG) refinement is explored, and the contributions introduced from individual GGT components and their combinations are quantified and evaluated. High-resolution QGs, with a spatial resolution of ~0.5 km, are computed over St. George’s Bay in southwestern Newfoundland, Canada. The findings indicate that fully focused Synthetic Aperture Radar (FFSAR) and Surface Water and Ocean Topography (SWOT) altimetry data are effectively in differentiating the performance of various QGs in coastal areas. The application of the vertical gravity gradient obtains the highest quality QG when utilizing individual GGT components. The combination two or more components results in improved QGs compared to the results derived from individual components. The integration of full GGT yields the best QG, with standard deviation (SD) of misfits against Sentinel-3A FFSAR (SWOT) altimetry data being 1.13 (2.49) cm, representing reductions of 28.48–53.50% (5.32–15.02%) compared to results derived from individual GGT components. Comparisons of the QG computed by fusing full GGT with the Canadian gravimetric QG CGG2013 and high-degree global geopotential models further underscore the advantages of using GGT in QG modeling, revealing SD reductions of 55.16–65.02% (7.55–33.95%) against FFSAR (SWOT) altimetry data. These findings underscore the effectiveness of using airborne GGT in coastal QG modeling, particularly in recovering short-wavelength signals and addressing challenges in satellite altimetry over coastal environments. Additionally, this study highlights the superiority of using full GGT over individual components in QG modeling.

  • Open Access

    HHU24SWDSCS: a shallow-water depth model over island areas in the South China Sea retrieved from satellite-derived bathymetry

    by Yihao Wu, Hongkai Shi, Dongzhen Jia, Ole Baltazar Andersen, Xiufeng He, Zhicai Luo, Yu Li, Shiyuan Chen, Xiaohuan Si, Sisu Diao, et al.

    Accurate shallow-water depth information for island areas is crucial for maritime safety, resource exploration, ecological conservation, and offshore economic activity. Traditional approaches such as shipborne sounding and airborne bathymetric light detection and ranging (lidar) surveys are expensive, time-consuming, and constrained in politically sensitive regions. Moreover, satellite-altimetry-predicted depths exhibit large errors over shallow waters. In contrast, satellite-derived bathymetry (SDB), estimated from multispectral imagery, provides a rapid, open-source, and cost-effective technique for comprehensively characterizing the bathymetry of a region. Given the scarcity of in situ water depth data for the South China Sea (SCS), a shallow-water depth model, HHU24SWDSCS (Hohai University 2024 Shallow-Water Depth Model of South China Sea), was developed using a linear band model by integrating 1298 Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) tracks with 70 Sentinel-2 multispectral images. The model covers over 120 islands and reefs in the SCS region at a resolution of 10 m. Validation against independent ICESat-2 depth data yielded a root mean square error for the model of 0.53–1.24 m (< 5 % of the maximum depth). Further validation using independent airborne lidar bathymetry data in the Lingyang Reef demonstrated an accuracy of 1.01 m. Comparisons with existing bathymetry models revealed the superior performance of the developed model. While traditional bathymetry models exhibit errors of up to tens of meters or larger over island regions and should therefore be used with caution, HHU24SWDSCS demonstrated good accuracy in shallow waters across the SCS. This model thus provides a reference for mapping shallow-water depth close to islands and provides fundamental support for research in oceanography, geodesy, and other disciplines. The HHU24SWDSCS data are freely available at https://doi.org/10.5281/zenodo.13852568 (Wu et al., 2024a).


  • Enhanced Sea Surface Height Estimation With Interference Rejection Using High-Frequency Fully Focused SAR Altimetry Data Over Island Areas

    by Hongkai Shi, Yihao Wu, Yihuang Shi, Xiufeng He, Xiangtian Zheng, Ole Baltazar Andersen

    The Fully-focused Synthetic Aperture Radar (FFSAR) altimetry technology has greatly enhanced the accuracy of coastal sea surface height (SSH). However, due to its pulse-limited mode in the cross-track direction, FFSAR is still susceptible to land interference. Additionally, the spatiotemporal resolution of in-situ data limits the evaluation of altimetric SSH in both coastal and open ocean regions. This study proposes a waveform interference detection and removal algorithm (WIDA), which utilizes waveform differencing and azimuthal constant false alarm rate techniques to identify and reject interference signals in island areas. Tide gauge data, particularly a seamless and high-resolution airborne gravimetric quasi-geoid model, are employed to validate the performance of WIDA, providing a new perspective for the continuous and consistent evaluation of SSH profiles. Validation of five years of data from six Sentinel-3A/B tracks over the Xisha Islands in the South China Sea demonstrates that FFSAR_WIDA (FFSAR waveforms retracked by WIDA), with 80 Hz sampling, significantly outperforms FFSAR_CORAL (Coastal Retracker for SAR Altimetry), UFSAR (Unfocused SAR), and UFSAR_WIDA within 5 km of the tide gauge station. The standard deviations (SD) for FFSAR_WIDA, FFSAR_CORAL, UFSAR, and UFSAR_WIDA are 0.153 m, 0.192 m, 0.367 m, and 0.173 m, respectively. Moreover, the evaluation with the quasi-geoid also reveals a marked improvement over FFSAR_CORAL and UFSAR within 5 km from the islands. The spatial distribution assessment shows that as the distance from the island decreases, the SD for FFSAR_CORAL (UFSAR) increases from 0.010 m (0.011 m) at 15 km to 0.061 m (0.089 m) at 3 km, while FFSAR_WIDA (UFSAR_WIDA) remains consistently below 0.011 m (0.014 m). Index Terms—FFSAR, Island Areas, Land Interference, Validation, Sea Surface Height.


  • Open Access

    SWOT-Based Intertidal Digital Elevation Model Extraction and Spatiotemporal Variation Assessment

    by Hongkai Shi, Dongzhen Jia, Xiufeng He, Ole Baltazar Andersen, Xiangtian Zheng

    Traditional methods for the construction of intertidal digital elevation models (DEMs) require the integration of long-term multi-sensor datasets and struggle to capture the spatiotemporal variation caused by ocean dynamics. The SWOT (surface water and ocean topography) mission, with its wide-swath interferometric altimetry technology, provides instantaneous full-swath elevation data in a single pass, offering a revolutionary data source for high-precision intertidal topographic monitoring. This study presents a framework for SWOT-based intertidal DEM extraction that integrates data preprocessing, topographic slope map construction, and tidal channel masking. The radial sand ridge region along the Jiangsu coast is analyzed using SWOT L2 LR (Low Resolution) unsmoothed data from July 2023 to December 2024. Multisource validation data are used to comprehensively assess the accuracy of sea surface height (SSH) and land elevation derived from LR products. Results show that the root mean square error (RMSE) of SSH at Dafeng, Yanghe, and Gensha tide stations is 0.25 m, 0.19 m, and 0.32 m, respectively. Validation with LiDAR data indicates a land elevation accuracy of ~0.3 m. Additionally, the topographic features captured by LR products are consistent with the patterns observed in the remote sensing imagery. A 16-month time-series analysis reveals significant spatiotemporal variations in the Tiaozini area, particularly concentrated in the tidal channel areas. Furthermore, the Pearson correlation coefficient for the DEMs generated from SWOT data decreased from 0.94 over a one-month interval to 0.84 over sixteen months, reflecting the persistent impact of oceanic dynamic processes on intertidal topography.


  • Seafloor Topography Modeling by Fusing ICESat-2 Lidar, Echo Sounding, and Airborne and Altimetric Gravity Data From Spherical Radial Basis Functions

    by Yihao Wu, Ole Baltazar Andersen, Adili Abulaitijiang, Hongkai Shi, Xiufeng He, Dongzhen Jia, Zhicai Luo, Haihong Wang

    Bathymetry provides instrumental information for studying sedimentary processes, global climate change, and benthic morphologies. The advantages and applicabilities of different techniques for bathymetry detection vary. We propose a framework for bathymetry enhancement from multi-source data based on spherical radial basis functions (SRBFs). A case study is conducted over the Paracel Islands in South China Sea, where Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) measurements, airborne gravimetric observations, echo soundings, and the reference model DTU18BAT are merged. Numerical results suggest that the fusion of ICESat-2 observations dramatically enhances the quality of the computed bathymetry model near the islands, the root-mean-squared error (RMSE) of which is reduced by 45.35–67.95% compared to existing models when validated against the satellite-derived bathymetry (SDB) with decimeter-level accuracy. By additionally fusing the airborne gravimetric data, bathymetry is further enhanced by ~22.49%, particularly over islands with sparse ICESat-2 trajectories. Comparisons with surveyed airborne bathymetric lidar data over the northern Antelope Reef yielded results consistent with those obtained from the SDB, suggesting that SDB is possible to be served as control data in waters devoid of ground truth data. Further analysis reveals that the models constrained by echo soundings performed better than existing models in deep waters, with reductions of 17.79–44.99% in terms of RMSE. By fusing airborne gravity data, bathymetry is improved by ~10%, highlighting the utilization of airborne gravimetry in both shallow and deep waters. The proposed SRBF approach offers an effective way to merge heterogeneous data for high-quality bathymetry determination.


  • Open Access

    Evaluating the Signal Contribution of the DTU21MSS on Coastal Mean Dynamic Topography and Geostrophic Current Modeling: A Case Study in the African–European Region

    by Hongkai Shi, Xiufeng He, Ole Baltazar Andersen

    With the accumulation of synthetic aperture radar (SAR) altimetry data and advancements in retracking algorithms, the improved along-track spatial resolution and signal-to-noise ratio have significantly enhanced the availability and precision of sea surface height (SSH) measurements, particularly in challenging environments such as coastal areas, ocean currents, and polar regions. These improvements have refined the accuracy and reliability of mean sea surface (MSS) models, which in turn have enhanced the precision of mean dynamic topography (MDT) and geostrophic current models. However, in-depth research is required to quantify the specific contributions of SAR altimetry to these critical regions and their impacts on the MSS, MDT, and geostrophic currents. Given that DTU21MSS (Technical University of Denmark MSS 2021) incorporates a substantial amount of SAR altimetry data, this study utilized independent Sentinel-3A altimetric observations to evaluate the signal improvements of DTU21MSS compared with DTU15MSS, with a focus on its performance in polar, coastal, and current regions. In addition, a least-squares-based approach was employed to assess the impact of the improved MSS model on the deduced MDT and geostrophic current signals. The numerical results revealed that DTU21MSS achieved an accuracy improvement of ~8% within 20 km offshore compared with DTU15MSS. In the polar regions within 100 km offshore, DTU21MSS exhibited a maximum signal enhancement of ~0.1 m, with overall improvements of 10–20%. The DTU21MSS-derived MDT solution demonstrates better consistency with validation data, reducing the standard deviation of misfits from 0.058 m to 0.054 m. Signal enhancements of maximumly 0.1 m were observed in the polar regions and the Mediterranean/Red Sea. Furthermore, improvements in the MSS and its error information could directly enhance the deduced MDT models, highlighting its foundational role in precise oceanographic modeling.


  • Open Access

    HHU24SWDSCS: A shallow-water depth model over island areas in South China Sea retrieved from Satellite-derived bathymetry

    by Yihao Wu, Hongkai Shi, Dongzhen Jia, Ole Baltazar Andersen, Xiufeng He, Zhicai Luo, Yu Li, Shiyuan Chen, Xiaohuan Si, Sisu Diao, et al.

    Accurate shallow-water depth information for island areas is crucial for maritime safety, resource exploration, ecological conservation, and offshore economic activity. Traditional approaches like shipborne sounding and airborne bathymetric light detection and ranging (LiDAR) surveys are expensive, time-consuming, and are limited in politically sensitive regions. Moreover, satellite altimetry-predicted depths exhibit large errors over shallow waters. In contrast, satellite-derived bathymetry (SDB), estimated from multispectral imagery, provides a rapid, open source, and cost-effective technique to fully characterize the bathymetry of a region. Given the scarcity of in-situ water-depth data for the South China Sea (SCS), a shallow-water depth model, HHU24SWDSCS, was developed by integrating 1298 Ice, Cloud, and land Elevation Satellite (ICESat-2) tracks with 70 Sentinel-2 multispectral images. The model covers >120 islands and reefs in the SCS, with a resolution of 10 m. Validation against independent ICESat-2 depth data produced a root mean square error for the model of 0.81–1.35 m (<5 % of the maximum depth), with an average coefficient of determination of 0.91. Validation against independent airborne LiDAR bathymetry data revealed an accuracy of 1.01 m for the Lingyang Reef. Further comparisons with existing bathymetry models revealed the superior performance of the model. While the existing bathymetry models exhibit errors up to tens of meters or larger for island regions, and should therefore be used with caution, the HHU24SWDSCS model exhibited good accuracy in shallow waters across the SCS. This model thus provides a reference for mapping shallow-water depth close to islands and provides fundamental support for research in oceanography, geodesy, and other disciplines.


  • Open Access

    Comparison of Mean Dynamic Topography Modeling from Multivariate Objective Analysis and Rigorous Least Squares Method

    by Yihao Wu, Xiufeng He, Jia Huang, Hongkai Shi, Haihong Wang, Yunlong Wu, Yuan Ding

    Filtering methods are usually used to combine the mean sea surface (MSS) and geoid (computable by global geopotential model (GGM)) into a common subspace, to model mean dynamic topography (MDT), which may lead to signal leakage and distortion problems. The use of the rigorous least squares (LS) method and multivariate objective analysis (MOA) alleviates these problems, and the derived MDTs from these two methods show better performance than MDTs derived from filtering methods. However, the advantages and disadvantages of these two methods have not been evaluated, and no direct comparison has yet been conducted between these two approaches regarding the performances in MDT recovery. In this study, we compare the performances of the MOA method with the LS method, providing information with respect to the usability of different methods in MDT modeling over regions with heterogeneous ocean states and hydrological conditions. We combined a recently published mean sea surface called DTU21MSS, and a satellite-only GGM named GO_CONS_GCF_2_DIR_R6, for MDT computation over four typical study areas. The results showed that the MDTs derived from the LS method outperformed the MOA method, especially over coastal regions and ocean current areas. The root mean square (RMS) of the discrepancies between the LS-derived MDT and the ocean reanalysis data was lower than the RMS of the discrepancies computed from the MOA method, by a magnitude of 1–2 cm. The formal error of the MDT estimated by the LS method was more reasonable than that derived from the MOA method. Moreover, the geostrophic velocities calculated by the LS-derived MDT were more consistent with buoy data than those calculated by the MOA-derived solution, by a magnitude of approximately 1 cm/s. The reason can be attributed to the fact that the LS method forms the design matrix segmentally, based on the error characteristics of the GGM, and suppresses high-frequency noise by applying constraints in different frequency bands, which improves the quality of the computed MDT. Our studies highlight the superiority of the LS-derived method versus the MOA method in MDT modeling.


  • Open Access

    Local Enhancement of Marine Gravity Field over the Spratly Islands by Combining Satellite SAR Altimeter-Derived Gravity Data

    by Yihao Wu, Junjie Wang, Adili Abulaitijiang, Xiufeng He, Zhicai Luo, Hongkai Shi, Haihong Wang, Yuan Ding

    The marine gravity field recovery close to land/island is challenging owing to the scarcity of measured gravimetric observations and sorely contaminated satellite radar altimeter-derived data. The satellite missions that carried the synthetic aperture radar (SAR) altimeters supplied data with improved quality compared to that retrieved from the conventional radar altimeters. In this study, we combine the satellite altimeter-derived gravity data for marine gravity field augmentation over island areas; in particular, the feasibility for regional augmentation by incorporating the SAR altimeter-derived gravity data is investigated. The gravity field modeling results over the Spratly Islands demonstrate that the marine gravity field is augmented by the incorporation of newly published satellite altimeter-derived gravity data. By merging the gravity models computed with the Sentinel-3A/B SAR altimetry data, the quasi-geoid and mean dynamic topography are dramatically improved, by a magnitude larger than 4 cm around areas close to islands, in comparison with the results directly derived from a combined global geopotential model alone. Further comparison of regional solutions computed from heterogeneous gravity models shows that the ones modeled from the SAR-based gravity models have better performances, the errors of which are reduced by a magnitude of 2~4 cm over the regions close to islands, in comparison with the solutions modeled with the gravity models developed without SAR altimetry data. These results highlight the superiority of using the SAR-based gravity data in marine gravity field recovery, especially over the regions close to land/island.