SMShubhali More

Shubhali More

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shubhali More has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Understanding the Effect of Three-Dimensional Design in Tandem Blade

    by Amit Kumar, Akshay Kumar, Hitesh Chhugani, Shubhali More, A. M. Pradeep

    In order to maximize the pressure ratio and efficiency, compressor designers have tried several unconventional design approaches. Tandem blading is one such unconventional design that promises a higher pressure ratio per stage through a higher diffusion factor. The nozzle shape created between the forward and aft blades of a tandem configuration acts as a passive boundary layer control mechanism. The boundary layer growth over the aft rotor is therefore effectively controlled with the help of this gap-nozzle flow. The flow complexity is likely to increase in the case of a tandem rotor due to the twin leakage vortices, twin wake regions, and their interaction with the hub and casing boundary layers. Modern compressor blades are often designed with three-dimensional blade techniques such as sweep, lean, dihedral, end bent, etc., to reduce the various losses and achieve optimum performance. However, to the best of the author’s knowledge, the effect of 3D blade designs on the performance of tandem rotors has not been fully explored so far. A comprehensive numerical investigation is undertaken to understand the effect of 3D designs on the performance of tandem blades. Axial sweep and dihedral failed to improve the performance of the tandem rotor. Significant improvement in the stall margin is observed for the forward chordwise-swept and negative lean tandem rotors and is largely attributed to lower tip incidence. The performance penalty of the forward-swept and negatively leaned cases can be reduced by integrating compound or variable lean and sweep into the design.


  • Effect of Differential Tip Clearance on the Performance of a Tandem Rotor

    by Amit Kumar, Hitesh Chhugani, Shubhali More, A. M. Pradeep

    Tandem blade is an interesting concept that promises a higher total pressure rise per stage. Owing to two separate tip leakage vortices and their interaction, losses are likely to increase particularly near the tip region. Although rotors are designed with optimum tip clearance, the clearance changes during engine operation as well as during its service life. In the case of tandem rotors, the forward and the aft rotors can have different tip clearances. This will also impact the performance of the stage. Six different tip clearances have been investigated. ANSYS CFX is used for steady RANS computational analysis. The results suggest that the performance of the tandem rotor is highly sensitive to the forward rotor tip clearance. Higher tip clearance adversely affects the total pressure rise and operation stability of the tandem rotor. At design mass flowrate, the performance degradation for tandem configuration with the higher tip clearance (Case2, Case 3, Case 5, and Case 6) is attributed to the vortex breakdown of TLV1, which leads to the sudden expansion of the blockage region near the rotor tip. Vortex breakdown primarily depends upon the swirling strength of TLV1 and TLV2 as well as on the adverse pressure gradient. Near the stall point, the role of the adverse pressure gradient becomes more dominant in the vortex breakdown.