MTMehmet Turkyilmaz

Mehmet Turkyilmaz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mehmet Turkyilmaz has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • THE REMOVAL OF ACID TEXTILE DYES BY ADSORPTION METHOD: OPTIMIZATION, KINETICS, ISOTHERM, AND THERMODYNAMICS

    by Farabi Temel, Mehmet Türkyılmaz

    In this study, the removal of Acid Red 337 (AR 337) and Bemacid Red (BR) dyes from aqueous solutions by the synthesized Co or Ni 2-(naphthalen-1-yloxy) acetohydrazide adsorbents (Co or Ni/compound 3 complexes) was investigated. Therefore, 2-(naphthalen-1-yloxy) acetohydrazide was synthesized from 1-naphthol, and the complexation of this compound with Cobalt or Nickel metal was carried out to obtain an adsorbent. The structures of the obtained compounds were characterized by 1H NMR and FT-IR. In further experiments, the batch method was conducted and evaluated based on contact time (1-60 min), pH (3-12), the dosage of Co or Ni organic complexes (0.02-0.2 g/L), and initial dye concentration (15-100 mg/L) regarding removal efficiency. The optimum conditions from the experimental data were obtained as 50 mg/L BR-100 mg/L AR 337 initial concentration, pH 6.7, 25-40 min. contact time, and 0.1 g adsorbent dosage for BR and AR 337 dyes, respectively. The maximum adsorption capacity obtained under optimum conditions was calculated as 461.14 and 861.8 mg/g for BR and AR 337, respectively, for a contact time of 40 min. Additionally, the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models, along with the Pseudo-first-order, Pseudo-second-order, Weber-Morris, and Evolvich kinetic models, were applied to the experimentally obtained results under optimal conditions, and the model constants were calculated. When R2 values were evaluated in terms of adsorption kinetics, it was seen that the pseudo-second-order kinetic model was a more compatible model for both dyes. Additionally, high correlation coefficients for BR and AR 337 were obtained in Temkin and Langmuir adsorption isotherm models, respectively. Thermodynamic analyses: It was found that the enthalpy change of AR 337 dye (∆Ho0) was positive and, therefore, endothermic. The fact that the standard free energy change (│∆Go│>20 kJ/mol) values were negative for both dyes indicates that the adsorption was physical and spontaneous. As a result, the proposed Co or Ni organic complexes were found to be promising in dye removal.

  • Sentetik 4-Klorofenol çözeltisinin Fenton oksidasyonu: Optimizasyon, Fenton prosesinin geliştirilmesi, fitotoksik değerlendirme

    by Mehmet Türkyılmaz

    Bu çalışmada öncelikli kirletici sınıfında bulunan 4-klorofenolün (4-KF) Fenton oksidasyonu ile arıtımı incelenmiştir. Optimizasyon deneyleri sonucunda pH 3, 350 mg/L Fe+2, 1500 mg/L H2O2 ve 25 mg/L 4-KF optimum değerler olarak belirlenmiş, %88.4 giderim verimi elde edilmiştir. Optimum şartlarda kombine sistemlerin etkisini belirlemek üzere Fenton prosesi ultrasonikasyon, UV-C ultraviyole radyasyon ile birleştirilmiş ve ayrıca klasik Fenton sisteminde oksidant dozlaması işlem başında ve ortasında olmak üzere kesikli olarak eklenmiştir. Sonuçlar ultrasonikasyon ve ultraviyole radyasyon ilavesinin sistemlerin hem 4-KF absorbans değerlerinin azaltılması hem de kimyasal oksijen ihtiyacı (KOİ) giderim verimlerini artırmada klasik Fenton prosesinden daha etkisiz kaldığını göstermiştir. Ancak klasik Fenton prosesinde uygulanan H2O2 dozlamasının kesikli yapılması ile 50 mg/L 4-KF absorbans gideriminde %8.6 artış ile %83.3, KOİ gideriminde ise %7.4 artış ile %45.2 giderim değerlerine yükselmiştir. Fitotoksikolojik deneyler sonucunda 0.08 g/L tohumlar; 0.05 g/L konsantrasyon ise bitki gelişimi için EC50 değeri olarak belirlenmiştir. Arıtılmış numunedeki fitotoksisitenin L. sativum tohumları üzerinde hafif olduğunu görülmüştür. Fenton prosesinin optimizasyonu sonrasında sisteme ultraviyole ışık (UV C), sonoliz ve oksidantın kesikli dozlanmasının ilave edilmesi ile ulaşılan sonuçlar ve 4-KF arıtımı için bu proseslerin uygulanmasından kaynaklanan fitotoksik değerlendirmelerin çalışmaya özgünlük sağladığı düşünülmektedir.

  • Open Access

    Co+2/Klor İleri Oksidasyon Prosesi Vasıtasıyla Bemacid Blue Giderimi, Reaktif Radikallerin Tespiti ve Kinetik Çalışmalar

    by Mehmet Türkyilmaz

    Çalışmada Bemacid Blue (BB) sentetik tekstil boyasının gideriminde oksidant olarak kullanılan klorun Co+2, Ultraviyole-C (UV-C) ve görünür ışık ile kombinasyonları oluşturularak en etkili proses seçilmiş ve optimizasyonu yapılmıştır. Deneyler sonucunda boya giderim verimi ve işletme maliyeti göz önüne alındığında Co+2/Klor prosesi seçilmiş ve C0: 50 mg/L BB (0.84mM), pH:3, klor: 0.8mM ve Co+2: 50µM 20 dk reaksiyon süresi optimum şartlarında %97.78 giderim verimine ulaşılmıştır. Proseste %46.1 katkı ile •OH en etkin ve baskın radikaldir, ancak reaktif klor radikallerinin (•Cl2-, •Cl ve •ClO (RCS – Reactive Chlorine Species)) %51.68 toplam katkı ile BB gideriminde etkin bir rol oynadığı belirlenmiştir. Optimum şartlarda gerçek tekstil atık suyu ile yapılan çalışmalar sonucunda, dalga boyu taramasında oluşan 1 ve 2 nolu ana piklerde sırasıyla %83.2 ve %88.6 oranında azalma gerçekleşerek etkin bir boya giderimi sağlanmıştır. Bununla birlikte, Behnajady–Modirshahla–Ghanbery (BMG) modeli için korelasyon katsayısı değeri (R2=0.9999), birinci ve ikinci derece modellerden daha yüksek olduğundan BB’nun Co+2/Klor prosesi ile giderimini açıklayan en iyi modeldir.

  • A comparison of endosulfan removal by photocatalysis process under UV-A and visible light irradiation: optimization, degradation byproducts and reuse

    by Mehmet Turkyilmaz, Sezen Kucukcongar

    In this study, the removal efficiency of endosulfan as a persistent organic pollutant and formation of its metabolites were investigated using Ag/TiO2/Fe3O4 photocatalyst under visible and UV-A light. Light intensity, catalyst amount, initial endosulfan concentration, initial pH and time were determined as controllable factors for Taguchi experimental design. The highest removal efficiencies of endosulfan were achieved as 86.14% and 85.46% for visible and UV–A light sources, respectively. According to the greatest best criterion, the level at which the highest S/N ratio was obtained for each parameter was accepted as the optimum value. As a result of the validation experiments, 94.2% and 91.9% efficiency were obtained for visible and UV-A light, respectively. The metabolite formations of endosulfan (endosulfan sulfate, ether, and lactone) remained below 7% in all experiments on a concentration basis. In the reuse experiments of the magnetically recovered photocatalyst, high removal efficiency of around 80% was obtained after four cycles. The removal efficiencies were found to be 86.7% and 84.8%, for real samples taken from the drinking water treatment plant inlet and the spring water network injected with endosulfan under optimal photocatalysis experimental conditions, respectively. It has been shown that nitrate and sulfate anions, which are in significant concentrations in raw water samples, have very little effects on endosulfan removal. The overall results showed that the Ag/TiO2/Fe3O4 photocatalyst was produced successfully, the catalyst was highly effective in the mineralization of endosulfan in synthetic and real water samples under UV and visible light, and effective yields could be obtained even with reuse.


  • Nickel adsorption from waters onto Fe3O4/sugar beet pulp nanocomposite

    by Sayed Mohammad Osman Sadat, Sezen Kucukcongar, Mehmet Turkyilmaz

    In this study the magnetic nanocomposite material was synthesized with Fe3O4 impregnated to sugar beet pulp using chemical precipitation technique. Ni(II) removal performance of magnetic nanocomposite was investigated under different environmental conditions such as contact time, adsorbent dose, pH, initial heavy metal concentration, etc. The experimental studies have shown that, 81.2% Ni(II) removal efficiency was achieved at optimal conditions (25 mg/L initial Ni(II) concentration at 40 minute contact time, 200 rpm shaking speed, 5 g/L nanocomposite dose and pH 6.6). Freundlich and Langmuir isotherm experiments were performed and correlation coefficients were determined as 94.5% and 99.4%, respectively. The maximum adsorption capacity of material was achieved as 9.36 mg/g. These findings indicate that the adsorption that takes place is a monolayer process. The results of the pseudo-second order kinetic model (R2 = 0.9947) indicate the chemisorptions process is used for Ni(II) removal using the electrostatic interaction. Thermodynamic studies illustrated that Ni(II) adsorption onto nanocomposite are exothermic and causes a decrease in the entropy. The adsorption of Ni(II) ions is non-spontaneous except for at low temperature and low initial concentrations. Nanocomposite characterization was illuminated with XRD, FT-IR, BET, TGA, TEM, SEM/EDX analysis. In this study, it was aimed to synthesis new adsorbent using sugar beet pulp together with Fe3O4 under suitable conditions, obtain a magnetic nanocomposite, and examine the reusability and recovery properties of the produced material. The use of industrial wastes as an adsorbent material provides both a solution to the problem of the removal of wastes and a reuse method for the use of wastes as a low cost adsorbent for a useful purpose. Therefore, it has two advantages: There is a need to investigate the feasibility of investigating all possible industry-based cheap adsorbent sources as well as the removal of heavy metals for the production of a reliable and harmless adsorbent. Graphical Abstract


  • Investigation of Endosulfan Removal and Metabolite Formation by Photocatalysis Process under UV-C Light Source Using Taguchi Experimental Design Program

    by Mehmet Turkyilmaz, Sezen Kucukcongar

    In this study, the efficiency of the synthesised Ag/TiO2/Fe3O4 catalyst in the removal of endosulfan and metabolite formation by the photocatalysis process, the effect, and optimisation of the ambient conditions were investigated under UV–C light source. Photocatalysis process for endosulfan removal and degradation to metabolites was optimised with Taguchi experimental design method and the results were evaluated statistically by analysis of variance. Light intensity, amount of catalyst, initial endosulfan concentration, pH, and time were chosen as controllable parameters. The highest S/N ratios on the based on parameters were obtained at 27 W light power, pH 4, 0.5 g/L catalyst amount, 60 min reaction time and 4 mg/L initial endosulfan concentration. Since these values, at which the highest removal rate will be achieved, were not found in the experimental design, a confirmation experiment was performed and the removal was obtained as 93.2%. It was found that the most effective parameters on the removal efficiency were the initial endosulfan concentration and pH, respectively. As a result of analysis of variance, Fcritical values showed that the effects of light power, catalyst amount and reaction time on endosulfan removal were not statistically significant. When the P values are examined, it is seen that there is a significant difference between the initial endosulfan concentration and the levels of the pH factor for endosulfan removal. No formations of endosulfan sulphate, endosulfan ether, and endosulfan lactone were observed at high concentrations while endosulfan was removed.


  • Endosülfan ve Metabolitlerinin Su Örneklerinde Vorteks Destekli Sıvı-Sıvı Mikro Ekstraksiyon ve Yüksek Performanslı Sıvı Kromatografi Kullanılarak Analizi

    by Mehmet Türkyilmaz, Sezen Küçükçongar

    Endosülfan ve metabolitlerinin doğada bozunmaya karşı mukavemetinin yüksek oluşu, canlılarda biyobirikim özelliği ve çevresel taşınımı nedeniyle, yasal kullanımlarının sınırlandırılması/durdurulması sonrasında bile çevresel örneklerde tayin edilebilmekte, çevre ve halk sağlığı açısından risk oluşturmaktadır. Bununla birlikte endosülfan, izomerlerine benzer toksik özelliklere sahip farklı metabolitlere parçalanabilmektedir. Bu nedenle endosülfan kaynakları ve uzaklaştırma yöntemlerinin belirlenmesinde endosülfan ve metabolitlerinin birlikte analiz edilmesi ve bozunmalarının izlenmesi önemlidir. Bu çalışmada endosülfan ve metabolitlerinin birlikte analizlerinin yapılmasında vorteks destekli sıvı-sıvı mikroekstraksiyon (VALLME) ve sıvı kromatografi analizi yöntemi uygulanarak geri kazanım çalışmalarının optimizasyonu yapılmıştır. Endosülfan izomerlerinin ve metabolitlerinin ayrılması ve saptanması için GL science C18 reversed phase kolon ve UV/VIS/PDA ikili absorbans detektörü içeren Shimatzu Prominence-i 2030- 3d sıvı kromatograf cihazı kullanılmıştır. 1 mL/dk akış hızında asetonitril:su karışımı (70:30, v:v) mobil faz olarak kullanılmıştır. Endosülfan lakton, endosülfan sülfat, endosülfan eter, β-endosülfan ve α-endosülfan, sırasıyla 214 nm'de kolonda tutulma sürelerine göre belirlenmiştir. HPLC analizinden sonra en iyi kromatogram n-hekzan solventi ile elde edilmiş; bu nedenle bu solvent için en yüksek geri kazanım değerlerinin elde edilmesinde numune hacminin, solvent hacminin ve ekstraksiyon süresinin etkileri deneysel olarak araştırılmış ve değişkenler için optimal koşullar sırasıyla 10 mL, 200 µL ve 3 dakika olarak elde edilmiştir. Optimum koşullar altında, endosülfan lakton, endosülfan sülfat, endosülfan eter, β-endosülfan ve α-endosülfan için geri kazanım oranları sırasıyla %115.31, %91.1, %96.79, %103.06 ve %99.06 olarak belirlenmiştir.