XWXiaohang Wang

Xiaohang Wang

*This is an algorithmically generated author record based on publicly available information.

Xiaohang Wang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Entropy-Generation-Based Optimization of Elbow Suction Conduit for Mixed-Flow Pumps

    by Na Yan, Xianzhu Wei, Xiaohang Wang, Guolong Fu, Rui Zhang

    The elbow suction conduit plays a decisive role in determining inflow conditions, thereby influencing a pump’s efficiency and cavitation characteristics. The complex three-dimensional swirling and separating flow makes pinpointing the sources and mechanisms of energy dissipation challenging. This study aims to accurately diagnose the sources of hydraulic losses within the elbow suction conduit and conduct effective geometric optimization to enhance overall pump performance. Entropy production theory was integrated with three-dimensional Reynolds-averaged Navier-Stokes simulations to quantitatively analyze the irreversible energy dissipation in different parts of the conduit. Results reveal that energy dissipation is predominantly concentrated at the inlet section, wall surfaces, outer curvature of the bend, and the inner conical diffuser. Key geometric parameters were systematically optimized. Compared to the baseline design, the optimized configuration not only reduced entropy generation induced by wall shear and turbulent fluctuations but also improved the spatio-temporal uniformity of the outflow. Consequently, this translated directly into enhanced overall pump performance: the optimized design shows a 0.34% increase in efficiency and a 3.6% reduction in the inception cavitation coefficient at the rated condition, leading to lower energy consumption and enhanced operational reliability. The effectiveness of entropy production analysis for the hydraulic optimization of pumps was demonstrated.

  • Open Access

    A Multi-Index Fusion Adaptive Cavitation Feature Extraction for Hydraulic Turbine Cavitation Detection

    by Yi Wang, Feng Li, Mengge Lv, Tianzhen Wang, Xiaohang Wang

    Under cavitation conditions, hydraulic turbines can suffer from mechanical damage, which will shorten their useful life and reduce power generation efficiency. Timely detection of cavitation phenomena in hydraulic turbines is critical for ensuring operational reliability and maintaining energy conversion efficiency. However, extracting cavitation features is challenging due to strong environmental noise interference and the inherent non-linearity and non-stationarity of a cavitation hydroacoustic signal. A multi-index fusion adaptive cavitation feature extraction and cavitation detection method is proposed to solve the above problems. The number of decomposition layers in the multi-index fusion variational mode decomposition (VMD) algorithm is adaptively determined by fusing multiple indicators related to cavitation characteristics, thus retaining more cavitation information and improving the quality of cavitation feature extraction. Then, the cavitation features are selected based on the frequency characteristics of different degrees of cavitation. In this way, the detection of incipient cavitation and the secondary detection of supercavitation are realized. Finally, the cavitation detection effect was verified using the hydro-acoustic signal collected from a mixed-flow hydro turbine model test stand. The detection accuracy rate and false alarm rate were used as evaluation indicators, and the comparison results showed that the proposed method has high detection accuracy and a low false alarm rate.


  • Open Access

    A Symbol Conditional Entropy-Based Method for Incipient Cavitation Prediction in Hydraulic Turbines

    by Mengge Lv, Feng Li, Yi Wang, Tianzhen Wang, Demba Diallo, Xiaohang Wang

    The accurate prediction of incipient cavitation is of great significance for ensuring the stable operation of hydraulic turbines. Hydroacoustic signals contain essential information about the turbine’s operating state. Considering that traditional entropy methods are easily affected by environmental noise when the state pattern is chaotic, leading to the extracted cavitation features not being obvious, a Symbol Conditional Entropy (SCE) feature extraction method is proposed to classify the original variables according to different state patterns. The uncertainty is reduced, and the ability to extract fault information is improved, so more effective cavitation features can be extracted to describe the evolving trend of cavitation. The extracted cavitation features are used as indicators to predict incipient cavitation. In order to avoid missing critical information in the prediction process, an interval mean (IM) algorithm is proposed to determine the initial prediction point. The effectiveness of the proposed method is validated with hydroacoustic signals collected at the Harbin Institute of Large Electric Machinery. The root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE) of incipient cavitation prediction results decreased to 0.0018, 0.0015, and 1.59%, respectively. The RMSE, MAE, and MAPE of the proposed SCE decreased by 84.62%, 85.29%, and 87% compared with the Permutation Entropy (PE) method. The comparison results with different prediction algorithms show that the proposed SCE has excellent trend prediction performance and high precision.


  • Open Access

    Effect of Different Types of Erosion on the Aerodynamic Performance of Wind Turbine Airfoils

    by Xiaohang Wang, Zhenbo Tang, Na Yan, Guojun Zhu

    Taking the S823 airfoil as the research object, this study investigates the influence of different types of leading-edge erosion on the aerodynamic performance of airfoil by using the computational fluid dynamics method. The effect of leading-edge erosion on the inception of stall vortex is also analysed. The results show that when the angle of attack (AoA) is greater than 5°, the leading-edge erosion results in a significant decrease in the lift coefficient and an increase in the drag coefficient. The deterioration in the drag coefficient of the airfoil caused by leading-edge erosion is much greater than that of the lift coefficient. Moreover, the maximum promotion rate of the drag coefficient can reach 357% at Re = 300,000. The exacerbation of the erosion level leads to a dramatic expansion of the stall vortex on the airfoil suction side at a large AoA and results in a reduction in the pressure difference between the pressure and suction sides of the airfoil. This is also the reason erosion causes the degradation of the aerodynamic performance of the wind turbine airfoil. This work is beneficial to establish the reasonable maintenance cycle of the wind turbine blades working in a sand blown environment.


  • Open Access

    An Output Power Interval Control Strategy Based on Pseudo-Tip-Speed Ratio and Adaptive Genetic Algorithm for Variable-Pitch Tidal Stream Turbine

    by Youming Cai, Mingzhu Li, Tianzhen Wang, Xiaohang Wang, Hubert Razik

    Power extraction has become a critical consideration in tidal stream turbine (TST) systems. In practice, the lumped disturbances under varying tidal current conditions may deteriorate the maximum power point tracking (MPPT) performance and cumulate fatigue damage over-rated power. Besides, the conventional pitch controllers are sensitive to parameter uncertainties of the nonlinear TST system. In this paper, a novel output power internal control strategy based on pseudo-tip-speed ratio and adaptive genetic algorithm (PTSR-AGA) is proposed to improve the anti-interference ability and reliability. The proposed control scheme consists of two parts. The first part proposes the PTSR method for MPPT to predict the TST’s operating point which contributes reducing the logical errors assigned to swell disturbances. The second part designed an AGA for the optimization of the pitch controller to conduct its angle delay. A reduced pitch control strategy is applied to the preprocessing of the pitch controller to reduce the mechanical wear over the rated power. The comparative simulation results validate the TST system can obtain a higher power efficiency of energy capture and a smoother power output with the proposed control strategies at full range of tidal current speed.


  • Open Access

    Prediction of the Influence of Runner Tip Clearance on the Performance of Tubular Turbine

    by Yanzhao Wu, Xiaohang Wang, Xiaolong Yang, Junfeng Ding, Di Zhu, Ran Tao, Huanmao Wang, Ruofu Xiao

    Tubular turbine is a type of turbine with low-head. Due to the fact that the runner of a tubular turbine is of axial-flow type, there will be a certain width of blade tip between the blade and the chamber. In order to explore the influence of tip clearance width on the flow inside the turbine, taking the model tubular turbine as the research object, six different tip clearance widths were compared and analyzed. The research shows that the increase in blade tip clearance width affects the performance of the turbine, reduces the minimum pressure at blade tip and causes cavitation in advance. Larger tip clearance width significantly increases pressure pulsation intensity inside the turbine, especially in the vaneless region between the runner and guide vane and the area of the runner tip. However, the increase in tip clearance width can greatly reduce the axial force for about 100 N and radial excitation force for about 50% of rotating parts. Therefore, during the design and processing of tubular turbines, the blade tip clearance width should be carefully selected to ensure safe and stable operation of the unit.