FCFederico Cecati

Federico Cecati

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Federico Cecati has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Interoperability Specifications for Multi-Vendor Converter-Dominated Grid: a Robust Stability Perspective

    by Federico Cecati, Marco Liserre

    Stability of multi-vendor power electronicsdominated grids requires proper specifications for converters interoperability, e.g. tuning boundaries for the converters’ control loops to be respected by all vendors. The confidentiality and variety of implementation of the converters’ control system by different vendors and the nonlinear dynamics of power converters make this task arduous. This paper formulates this research question as a robust stability problem, embedding frequency-dependent uncertainties in the converter control systems and analytically quantifying the amount of uncertainty able to warranty the power grid stability. Grid following converters are considered and modeled with a nonlinear grey-box approach, in contrast with conventional small-signal black-box models which suffer from inaccuracy when their operating point deviates from the nominal one. This paper also demonstrates both analytically and with Hardware-In-the-Loop (HIL) experiments that different converters operating points (e.g. active power injections, ac bus voltages) radically affect their stability, empathizing the necessity of nonlinear converters models to realize accurate power grid stability analyses.

  • MPC-Based Charge and Temperature Homogenization and Regulation for Series-Reconfigurable Lithium-Ion Battery Packs

    by Galo D. Astudillo, Hamzeh Beiranvand, Federico Cecati, Andreas Würsig, Marco Liserre

    The lifetime of a battery pack consisting of many cells in series is determined by the weakest cell. Heterogeneous degradation of the battery pack, as a result of inherent discrepancy between cells, accelerates the aging of the weakest cell, which may not be overcome by conventional passive and active balancing techniques. Therefore, this paper presents a methodology for charging series-reconfigurable Lithium-ion battery packs. To mitigate the negative effects of unregulated temperature increases, thermal gradients, state-of-charge imbalances, and other cell-to-cell variations, we formulate and evaluate a charging strategy that addresses temperature and charge homogenization and temperature tracking. Model Predictive Control (MPC) was used to generate an optimal current trajectory to reach the desired temperature and voltage goals; while two complementary algorithms were developed to homogenize the charge and temperature in the reconfigurable battery. Comparative simulations were performed on the proposed reconfigurable battery, showing its superior performance when dealing with battery cells with different aging conditions. Moreover, the solver time does not increase with the number of cells, ensuring the desired scalability for larger battery systems. Finally, experiments were conducted for three different case studies to verify the proposed MPC-based charge and temperature homogenization and control.


  • Open Access

    Stability Analysis and HIL Validation of PV Park Voltage Control Considering Communication Delays

    by Behnam Daftary Besheli, Federico Cecati, Sante Pugliese, Marco Liserre Fellow, Johanna Kristin Maria Becker, Mario Paolone

    With advances in industrial data communication technologies, MW-scale PV parks increasingly depend on communication-based coordination among Power Electronic Converters (PECs) to ensure precise voltage regulation and stability, especially during grid fault events. However, Communication Delay (CD) can degrade voltage control, leading to sustained oscillations and Transient Overvoltage (TOV) during post-fault recovery. This paper analyzes the impact of such delays on PV park stability under a centralized secondary voltage controller (SecVC) and proposes a local control strategy to enhance coordination robustness to CDs. A nonlinear model of a PV park is built and used for small-signal stability analysis, incorporating Monte-Carlo Simulations (MCS) to assess the impact of stochastic delays, alongside time-domain simulations to evaluate dynamic responses. The proposed approach is validated through Hardware-in-the-Loop (HIL) testing, using two HIL devices interfaced via a communication network emulator (CNE) with the Modbus-TCP protocol.


  • Interoperability Specifications for Multi-Vendor Converter-Dominated Grid: A Robust Stability Perspective

    by Federico Cecati, Marco Liserre

    Stability of multi-vendor power electronics-dominated grids requires proper specifications for converters interoperability, e.g., tuning boundaries for the converters’ control loops to be respected by all vendors. The confidentiality and variety of implementation of the converters’ control system by different vendors and the nonlinear dynamics of power converters make this task arduous. This paper formulates this research question as a robust stability problem, embedding frequency-dependent uncertainties in the converter control systems and analytically quantifying the amount of uncertainty able to warranty the power grid stability. Grid following converters are considered and modeled with a nonlinear grey-box approach, in contrast with conventional small-signal black-box models which suffer from inaccuracy when their operating point deviates from the nominal one. This paper also demonstrates both analytically and with Hardware-In-the-Loop (HIL) experiments that different converters operating points (e.g., active power injections, ac bus voltages) radically affect their stability, empathizing the necessity of nonlinear converters models to realize accurate power grid stability analyses.


  • Open Access

    Robust Stability Analysis of Grid-Forming Converter-Dominated Grids Using Grey-Box Modelling Approach

    by Endalkachew Degarege Almawu, Federico Cecati, Marco Liserre

    In recent years, continuous efforts have been made for the modelling and stability analysis of converter-dominated grids. Ensuring stability in converter-dominated grids presents a unique challenge, primarily due to the manufacturers’ intellectual property (IP) protections. Determining the robust stability boundary of a grid incorporating converters from various manufacturers remains an area requiring extensive research. Recently, a grey-box modelling approach for studying interoperability has been proposed in the literature. However, the existing methodology is solely suitable for grid-following converters. This study bridges the gap by proposing a GFM converters model which aligns with the methodology for analysing the interoperability of GFL converters. The model is designed to represent a range of control system implementations across different manufacturers. Using robust control theory, this approach assesses the grid’s stability margin and sensitivity analysis of the control loops under various conditions considering a single GFM converter. The results are validated both analytically and through real-time hardware-in-the-loop (HIL) tests to demonstrate the model accuracy in predicting robust stability margin and sensitivity of the control loops in GFM converter-dominated grids.


  • Open Access

    MPC-based Charge and Temperature Homogenization and Regulation for Series-Reconfigurable Lithium-Ion Battery Packs

    by Galo Daniel Astudillo Heras, Hamzeh Beiranvand, Federico Cecati, Andreas Würsig, Marco Liserre

    The lifetime of a battery pack consisting of many cells in series is determined by the weakest cell. Heterogeneous degradation of the battery cell, as a result of inherent discrepancy between cells, accelerates the aging of the weakest cell, which cannot be overcome by conventional passive and active balancing techniques. Therefore, this paper presents a methodology for charging series-reconfigurable Lithium-ion battery packs. To mitigate the negative effects of unregulated temperature increases, thermal gradients, state-of-charge imbalances, and other cell-to-cell variations, we formulate and evaluate a charging strategy that addresses temperature and charge homogenization and temperature tracking. Model Predictive Control (MPC) was used to generate an optimal current trajectory to reach the desired temperature and voltage goals; while two complementary algorithms were developed to homogenize the charge and temperature in the reconfigurable battery. Comparative simulations were performed on the proposed reconfigurable battery, showing its superior performance when dealing with battery cells with different aging conditions. Moreover, the solver time does not increase with the number of cells, ensuring the desired scalability for larger battery systems. Finally, experiments were conducted for three different case studies to verify the proposed MPC-based charge and temperature homogenization and control.

  • Open Access

    Robust Stability Analysis of Grid-Forming Converters Dominated Grids Using Grey-Box Modeling Approach

    by Endalkachew Degarege Almawu, Federico Cecati, Marco Liserre

    In the recent years, a continuous effort have been made for modeling and stability analysis of converter dominated grids. Ensuring stability in converter dominated grid presents a unique challenge, primarily due to manufacturers’ intellectual property (IP) protections. Determining the robust stability boundary of a grid incorporating converters from various manufacturers remains an area requiring extensive research. Recently, a grey-box modeling approach for studying interoperability has been proposed in literature. However, the existing methodology is solely suitable for grid following converters. This study bridges the gap by proposing GFM converters model which aligns with the methodology for analyzing interoperability of GFL converters. The model is designed to represent a range of control system implementations across different manufacturers. Using robust control theory, this approach assesses the grid’s stability margin and sensitivity analysis of the uncertain control loops under various conditions considering a single GFM converter. The results are validated both analytically and through real time hardware-in-the-loop (HIL) test to demonstrate the model’s accuracy in predicting robust stability margin and the sensitive of the control loops in GFM converters dominated grids.

  • Open Access

    Interoperability Specifications for Multi-Vendor Converter-Dominated Grid: a Robust Stability Perspective

    by Federico Cecati, Marco Liserre

    Stability of multi-vendor power electronics-dominated grids requires proper specifications for converters interoperability, e.g. tuning boundaries for the converters' control loops to be respected by all vendors. The confidentiality and variety of implementation of the converters' control system by different vendors and the nonlinear dynamics of power converters make this task arduous. This paper formulates this research question as a robust stability problem, embedding frequency-dependent uncertainties in the converter control systems and analytically quantifying the amount of uncertainty able to warranty the power grid stability. Grid following converters are considered and modeled with a nonlinear grey-box approach, in contrast with conventional small-signal black-box models which suffer from inaccuracy when their operating point deviates from the nominal one. This paper also demonstrates both analytically and with Hardware-In-the-Loop (HIL) experiments that different converters operating points (e.g. active power injections, ac bus voltages) radically affect their stability, empathizing the necessity of nonlinear converters models to realize accurate power grid stability analyses.


  • Open Access

    Transient Stability Analysis of Grid Forming MMC with Current Limitation based on Junction Temperature

    by Federico Cecati, Nidhi Bisht, Debi Prasad Nayak, Venkata Yoganand Konda, Marco Liserre

    Grid forming converters can offer fast voltage support during grid disturbances through a prompt injection of reactive current. Nevertheless, the large overcurrents experienced during grid faults can trigger the converter current limiter, which is often responsible of transient instability problems. While over-dimensioning the power rating of the converter enhances its grid supporting capabilities, it significantly increases the costs. Online monitoring of the semiconductor junction temperature, instead, enables the converter to perform a safe over-current operation for a limited time interval, potentially improving the transient stability without converter overdimensioning. Nevertheless, the transient stability analysis and current limitation design considering thermal dynamics is very challenging due to the high order of the model, which makes conventional methodologies based on second-order models not applicable. This article proposes a temperaturedependent current limitation in grid-forming converters, enabling overcurrent operation and significantly improving transient stability. A methodology for transient stability analysis is proposed based on numerical methods applied to the nonlinear state-space model of the converter under thermally stressed conditions during over-current scenarios caused by grid faults. The proposed method is implemented in a simulation of a grid-forming medium voltage Modular Multilevel Converter (MMC) considering the dynamics of junction temperatures.