Zeyin He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zeyin He has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Shizheng Sun
School of Mechatronics and Automotive Engineering, Chongqing Jiaotong University, Chongqing, China
5 shared publications - Ke Pang
School of Mechatronics and Automotive Engineering, Chongqing Jiaotong University, Chongqing, China
2 shared publications - Yu Han
School of Mechanotronics and Vehicle Engineering, Chongqing Jiaotong University, Chongqing, People’s Republic of China
2 shared publications Deng Tao
1 shared publicationGaohua Hu
1 shared publication- Gaohua Hu
2 Changzhou CRRC Ruitai Equipment Technology Co., Ltd., Changzhou, 213011, China
1 shared publication
Latest Publications
- Open Access
- 5 March 2026
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 28 (2) , 402-415
Dynamic characteristics and experimental study of rigid-flexible coupling for rail heavy-duty maintenance vehicle
Railway large-scale maintenance vehicles are key equipment for track maintenance. To investigate their dynamic operational characteristics, a dynamics model incorporating multi-rigid-flexible coupling components was developed, and its validity was verified through full-scale vibration tests. The results indicate that: gear system excitation has a significant influence on the vibration characteristics in the X -direction and Y -direction of the vehicle system, so in the dynamic simulation model of heavy-duty maintenance vehicles, gear system excitation load must be considered. As the center distance between the drive gearbox and axle decreases, the root-mean-square value value of vibration of the axleboxes on both sides are reduced, adjusting the center distance while ensuring adequate transmission space of the bogie power axle can effectively control the vibration of the axleboxes on both sides; The vibration response of the left axlebox is always larger than that of other positions under all working conditions, indicating that the side wheel and shaft far from the driving gearbox are more prone to encounter slackness failure induced by dynamic excitation. Therefore, during design stage, it is recommended to increase the axle interference fit.
- 5 March 2026
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 28 (2) , 402-415
Open AccessDynamic characteristics and experimental study of rigid-flexible coupling for rail heavy-duty maintenance vehicle
Railway large-scale maintenance vehicles are key equipment for track maintenance. To investigate their dynamic operational characteristics, a dynamics model incorporating multi-rigid-flexible coupling components was developed, and its validity was verified through full-scale vibration tests. The results indicate that: gear system excitation has a significant influence on the vibration characteristics in the X -direction and Y -direction of the vehicle system, so in the dynamic simulation model of heavy-duty maintenance vehicles, gear system excitation load must be considered. As the center distance between the drive gearbox and axle decreases, the root-mean-square value value of vibration of the axleboxes on both sides are reduced, adjusting the center distance while ensuring adequate transmission space of the bogie power axle can effectively control the vibration of the axleboxes on both sides; The vibration response of the left axlebox is always larger than that of other positions under all working conditions, indicating that the side wheel and shaft far from the driving gearbox are more prone to encounter slackness failure induced by dynamic excitation. Therefore, during design stage, it is recommended to increase the axle interference fit.
- Open Access
- 14 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Numerical simulation and experimental study of wheelset press-fitting in rail heavy-duty maintenance machinery
- 14 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessNumerical simulation and experimental study of wheelset press-fitting in rail heavy-duty maintenance machinery
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (2) , 2321-2330
A High-Precision 3-D Vibration Acceleration Sensor Based on FBGs
In this paper, a three-dimensional vibration acceleration sensor based on fiber optic grating (FBG) is proposed. The sensor, with only 4 FBGs, adopts a spatially layered sensing structure and achieves vibration acceleration measurements as well as a temperature compensation function. This document delves into the principles of FBG sensing and mechanics to understand the relationship between the acceleration this sensor measures and the wavelength drift. Finite element analysis (FEA) was used to optimize the pasting position of the FBG and to understand the resonance frequency of the sensor. The experimental results show that the operating frequency range of the sensors for the X, Y, and Z axes is 0-600 Hz, 0-700 Hz, and 0-600 Hz, respectively; the sensitivities are 7.85 pm/g, 8.15 pm/g and 6.65 pm/g, respectively. With repeatability errors of 2.32%, 1.54%, and 1.06% and a stability test error of 1.124%, the sensor proved to have high stability. The neural network model was constructed using an Extreme Learning Machine (ELM) based on the Whale Optimization Algorithm (WOA). The model is optimized using WOA to obtain its optimal initial weights and thresholds. After the algorithm’s optimization, the maximum linear error of the sensor’s three axes is 1.72%, and the maximum coupling error is 0.78%, proving that the sensor has high measurement accuracy. Combined with the sensor’s stability and measurement accuracy analysis, it proves that the sensor can not only measure three-dimensional vibration acceleration but also has high accuracy.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (2) , 2321-2330
A High-Precision 3-D Vibration Acceleration Sensor Based on FBGs
In this paper, a three-dimensional vibration acceleration sensor based on fiber optic grating (FBG) is proposed. The sensor, with only 4 FBGs, adopts a spatially layered sensing structure and achieves vibration acceleration measurements as well as a temperature compensation function. This document delves into the principles of FBG sensing and mechanics to understand the relationship between the acceleration this sensor measures and the wavelength drift. Finite element analysis (FEA) was used to optimize the pasting position of the FBG and to understand the resonance frequency of the sensor. The experimental results show that the operating frequency range of the sensors for the X, Y, and Z axes is 0-600 Hz, 0-700 Hz, and 0-600 Hz, respectively; the sensitivities are 7.85 pm/g, 8.15 pm/g and 6.65 pm/g, respectively. With repeatability errors of 2.32%, 1.54%, and 1.06% and a stability test error of 1.124%, the sensor proved to have high stability. The neural network model was constructed using an Extreme Learning Machine (ELM) based on the Whale Optimization Algorithm (WOA). The model is optimized using WOA to obtain its optimal initial weights and thresholds. After the algorithm’s optimization, the maximum linear error of the sensor’s three axes is 1.72%, and the maximum coupling error is 0.78%, proving that the sensor has high measurement accuracy. Combined with the sensor’s stability and measurement accuracy analysis, it proves that the sensor can not only measure three-dimensional vibration acceleration but also has high accuracy.
- 23 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (5) , 4833-4842
High-Precision FBG 3-D Force Sensor Based on Spatial Hierarchical Sensing Structure
A three-dimensional (3-D) force sensor based on fiber Bragg grating (FBG) is proposed in this paper. A spatially layered elastomer structure is designed, and a single-mode fiber inscribed with 4 FBGs is laid at each place of the structure to realize 3-D force sensing of the robot and compensate for temperature interference. The principle of FBG sensing and force measurement is investigated to reveal the mapping relationship between the wavelength drift and force of this 3-D force sensor. Based on the finite element simulation analysis, the FBG package position is optimized, and the sensor prototype is tested. Experimental results show that the linearity of the 3-D force sensor force sensing is good, and its sensitivity is 3.104pm/N, 3.077pm/N and 1.890pm/N, respectively. Based on Sparrow Search Algorithm optimization Extreme Learning Machine (SSA-ELM) nonlinear decoupling algorithm is used to construct the neural network model, and the SSA is used to optimize the model and obtain the best initial weights and thresholds of the network. The maximum I error after decoupling is 1.58%, the maximum II error is 0.93%, and the decoupling training time is 1.44s. The algorithm can construct the inter-dimensional coupling relationship of 3-D force more effectively and improve the sensor measurement accuracy. In addition, the sensor has strong resistance to electromagnetic interference and noise, fewer sensitive components, a simple lineup, a small structure and lightweight, easy processing, and meets the requirements of miniaturization, lightweight and refinement of multi-dimensional force sensors for collaborative robots.
- 23 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (5) , 4833-4842
High-Precision FBG 3-D Force Sensor Based on Spatial Hierarchical Sensing Structure
A three-dimensional (3-D) force sensor based on fiber Bragg grating (FBG) is proposed in this paper. A spatially layered elastomer structure is designed, and a single-mode fiber inscribed with 4 FBGs is laid at each place of the structure to realize 3-D force sensing of the robot and compensate for temperature interference. The principle of FBG sensing and force measurement is investigated to reveal the mapping relationship between the wavelength drift and force of this 3-D force sensor. Based on the finite element simulation analysis, the FBG package position is optimized, and the sensor prototype is tested. Experimental results show that the linearity of the 3-D force sensor force sensing is good, and its sensitivity is 3.104pm/N, 3.077pm/N and 1.890pm/N, respectively. Based on Sparrow Search Algorithm optimization Extreme Learning Machine (SSA-ELM) nonlinear decoupling algorithm is used to construct the neural network model, and the SSA is used to optimize the model and obtain the best initial weights and thresholds of the network. The maximum I error after decoupling is 1.58%, the maximum II error is 0.93%, and the decoupling training time is 1.44s. The algorithm can construct the inter-dimensional coupling relationship of 3-D force more effectively and improve the sensor measurement accuracy. In addition, the sensor has strong resistance to electromagnetic interference and noise, fewer sensitive components, a simple lineup, a small structure and lightweight, easy processing, and meets the requirements of miniaturization, lightweight and refinement of multi-dimensional force sensors for collaborative robots.
- 10 February 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (5) , 055105
A novel inductive angular displacement sensor based on time-grating
The paper proposes a novel inductive angular displacement sensor to measure large-diameter hollow rotating mechanical components in large science facilities. The sensor design includes a stator, a rotor with two layers of windings. The stator is fabricated according to the dimension of the rotor, which is the large-diameter hollow rotary mechanical components. Based on the principle of electromagnetic induction, the theoretical model of the proposed sensor is acquired by mathematical equations in detail. The proposed sensor design ensures integration of the large-diameter hollow rotating mechanical components with the stator, and solves the problem that the sensors cannot be coaxially installed in the closed-loop control process of large mechanical rotating parts. The performance of the sensor is evaluated by tests of the prototype sensor fabricated by printed circuit board technology, which manifests the effectiveness of the proposed sensor. The results demonstrate the value of original dynamic relative error is ±97.6″ over 0°–360° range, and the measurement error mainly includes first-order and second-order harmonic components. Therefore, the original errors are reduced by optimizing the angular displacement algorithm of the sensor, optimized results demonstrate the final relative accuracy of the sensor is ±3.5″ over the 0°–360° measurement range.
- 10 February 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (5) , 055105
A novel inductive angular displacement sensor based on time-grating
The paper proposes a novel inductive angular displacement sensor to measure large-diameter hollow rotating mechanical components in large science facilities. The sensor design includes a stator, a rotor with two layers of windings. The stator is fabricated according to the dimension of the rotor, which is the large-diameter hollow rotary mechanical components. Based on the principle of electromagnetic induction, the theoretical model of the proposed sensor is acquired by mathematical equations in detail. The proposed sensor design ensures integration of the large-diameter hollow rotating mechanical components with the stator, and solves the problem that the sensors cannot be coaxially installed in the closed-loop control process of large mechanical rotating parts. The performance of the sensor is evaluated by tests of the prototype sensor fabricated by printed circuit board technology, which manifests the effectiveness of the proposed sensor. The results demonstrate the value of original dynamic relative error is ±97.6″ over 0°–360° range, and the measurement error mainly includes first-order and second-order harmonic components. Therefore, the original errors are reduced by optimizing the angular displacement algorithm of the sensor, optimized results demonstrate the final relative accuracy of the sensor is ±3.5″ over the 0°–360° measurement range.
- 18 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (5) , 4096-4105
Soft Bionic Skin With Touch-Slip and Thermal Perception Using Double-Layer Distributed FBG Sensing Array
A flexible bionic skin using fiber Bragg grating (FBG) is proposed in this paper, and a double-layer distributed sensing array unit is designed which can realize the detection of pressure, sliding information and environmental temperature. Based on finite element simulation analysis, the embedding position of the FBG array unit in the packaging material is optimized, and a prototype was built. A series of tactile, sliding and temperature experiments were done. The experimental results show that the tactile and temperature perception of the flexible skin has good linearity, and its sensitivity is 7.287 nm/MPa and 13 pm/°C, respectively. Adaptive Network-based Fuzzy Inference System (ANFIS) is used to compensate the tactile experimental data, which can effectively reduce the influence of temperature as a non-target parameter on tactile and the coupling error is less than 4%. The sliding information of the object can be obtained from the characteristic signal of sliding sensing. Finally, Empirical Mode Decomposition (EMD) and Support Vector Machines (SVM) are used to optimize the sliding data, which can effectively identify the sliding direction and speed of the object. In addition, the skin also has a simple structure, strong ability to be free of the electromagnetism interfering, flexibility, low cost and so on, which is expected to be used in the intelligent machine in the future.
- 18 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (5) , 4096-4105
Soft Bionic Skin With Touch-Slip and Thermal Perception Using Double-Layer Distributed FBG Sensing Array
A flexible bionic skin using fiber Bragg grating (FBG) is proposed in this paper, and a double-layer distributed sensing array unit is designed which can realize the detection of pressure, sliding information and environmental temperature. Based on finite element simulation analysis, the embedding position of the FBG array unit in the packaging material is optimized, and a prototype was built. A series of tactile, sliding and temperature experiments were done. The experimental results show that the tactile and temperature perception of the flexible skin has good linearity, and its sensitivity is 7.287 nm/MPa and 13 pm/°C, respectively. Adaptive Network-based Fuzzy Inference System (ANFIS) is used to compensate the tactile experimental data, which can effectively reduce the influence of temperature as a non-target parameter on tactile and the coupling error is less than 4%. The sliding information of the object can be obtained from the characteristic signal of sliding sensing. Finally, Empirical Mode Decomposition (EMD) and Support Vector Machines (SVM) are used to optimize the sliding data, which can effectively identify the sliding direction and speed of the object. In addition, the skin also has a simple structure, strong ability to be free of the electromagnetism interfering, flexibility, low cost and so on, which is expected to be used in the intelligent machine in the future.
- 4 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (4) , 3087-3096
A Novel Inductive Angular Displacement Sensor With Multi-Probe Symmetrical Structure
This articledevelops a novel probe-type inductive angular displacement sensor based on time-grating, which is suitable for large-diameter hollow rotary table position detection of the heavy-duty machine tools. It abandons the traditional sensor precise marking lines in spatial domain, and integrates the tested mechanical component with the sensor, which realizes the angular displacement measurement directly. The sensor is divided into three parts: 1) a permalloy probe, which is adopted the simple structure to reduce the assembly errors; 2) a 45-steel rotor, which is a standard spur gear in a heavy-duty machine tool rotary table transmission system; 3) three groups of copper coils, which include sinusoidal coils, cosine coils and inductive coils. The theoretical model of angular displacement measurement is derived by means of mathematical equation in detail. Then the feasibility of the sensor structure is verified by finite element simulation. After that, a sensor prototype is built and tested in the laboratory, showing that the sensor has an original error of ±0.018° (approximately ± $64^{\prime \prime }$ ) over a full 360° range. The error analysis found that the systematic error is the main component. As a result, the mechanical structure and angular displacement algorithm of the sensor are optimized, which can significantly reduce the original errors of the sensor. After optimization, the final accuracy of the sensor is within ±0.0012° (approximately ± $4.4^{\prime \prime }$ ) in the range of 0°–360°.
- 4 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (4) , 3087-3096
A Novel Inductive Angular Displacement Sensor With Multi-Probe Symmetrical Structure
This articledevelops a novel probe-type inductive angular displacement sensor based on time-grating, which is suitable for large-diameter hollow rotary table position detection of the heavy-duty machine tools. It abandons the traditional sensor precise marking lines in spatial domain, and integrates the tested mechanical component with the sensor, which realizes the angular displacement measurement directly. The sensor is divided into three parts: 1) a permalloy probe, which is adopted the simple structure to reduce the assembly errors; 2) a 45-steel rotor, which is a standard spur gear in a heavy-duty machine tool rotary table transmission system; 3) three groups of copper coils, which include sinusoidal coils, cosine coils and inductive coils. The theoretical model of angular displacement measurement is derived by means of mathematical equation in detail. Then the feasibility of the sensor structure is verified by finite element simulation. After that, a sensor prototype is built and tested in the laboratory, showing that the sensor has an original error of ±0.018° (approximately ± $64^{\prime \prime }$ ) over a full 360° range. The error analysis found that the systematic error is the main component. As a result, the mechanical structure and angular displacement algorithm of the sensor are optimized, which can significantly reduce the original errors of the sensor. After optimization, the final accuracy of the sensor is within ±0.0012° (approximately ± $4.4^{\prime \prime }$ ) in the range of 0°–360°.
- 12 November 2016
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 30 (11) , 4859-4867
Parametric modeling and contact analysis of helical gears with modifications
- 12 November 2016
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 30 (11) , 4859-4867
Parametric modeling and contact analysis of helical gears with modifications