Christoph Schwarzmeier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christoph Schwarzmeier has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ulrich Rüde
CERFACS
6 shared publications Ulrich Rüde
Chair for System Simulation Friedrich-Alexander-Universität Erlangen-Nürnberg Cauerstraße 11 91058 Erlangen Germany
4 shared publications- Elissa Eggenweiler
Institute of Applied Analysis and Numerical Simulation, University of Stuttgart, Stuttgart, Germany
2 shared publications - Iryna Rybak
Institute of Applied Analysis and Numerical Simulation, University of Stuttgart, Stuttgart, Germany
2 shared publications Aniket S. Ambekar
Department of Chemical Engineering Indian Institute of Technology Delhi New Delhi India
1 shared publicationBernhard Vowinckel
Leichtweiß-Institute for Hydraulic Engineering and Water Resources Technische Universität Braunschweig 38106 Braunschweig Germany
1 shared publication
Latest Publications
- Open Access
- 24 April 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 961, R1
Particle-resolved simulation of antidunes in free-surface flows
The interaction of supercritical turbulent flows with granular sediment beds is challenging to study both experimentally and numerically. This challenging task has hampered advances in understanding antidunes, the most characteristic bedform of supercritical flows. This article presents the first numerical attempt to simulate upstream-migrating antidunes with geometrically resolved particles and a liquid–gas interface. Our simulations provide data at a resolution higher than laboratory experiments, and they can therefore provide new insights into the mechanisms of antidune migration and contribute to a deeper understanding of the underlying physics. To manage the simulations’ computational costs and physical complexity, we employ the cumulant lattice Boltzmann method in conjunction with a discrete element method for particle interactions, as well as a volume-of-fluid scheme to track the deformable free surface of the fluid. By reproducing two flow configurations of previous experiments (Pascal et al., Earth Surf. Process. Landf., vol. 46, issue 9, 2021, pp. 1750–1765), we demonstrate that our approach is robust and accurately predicts the antidunes’ amplitude, wavelength and celerity. Furthermore, the simulated wall shear stress, a key parameter governing sediment transport, is in excellent agreement with the experimental measurements. The highly resolved data of fluid and particle motion from our simulation approach open new perspectives for detailed studies of morphodynamics in shallow supercritical flows.
- 24 April 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 961, R1
Open AccessParticle-resolved simulation of antidunes in free-surface flows
The interaction of supercritical turbulent flows with granular sediment beds is challenging to study both experimentally and numerically. This challenging task has hampered advances in understanding antidunes, the most characteristic bedform of supercritical flows. This article presents the first numerical attempt to simulate upstream-migrating antidunes with geometrically resolved particles and a liquid–gas interface. Our simulations provide data at a resolution higher than laboratory experiments, and they can therefore provide new insights into the mechanisms of antidune migration and contribute to a deeper understanding of the underlying physics. To manage the simulations’ computational costs and physical complexity, we employ the cumulant lattice Boltzmann method in conjunction with a discrete element method for particle interactions, as well as a volume-of-fluid scheme to track the deformable free surface of the fluid. By reproducing two flow configurations of previous experiments (Pascal et al., Earth Surf. Process. Landf., vol. 46, issue 9, 2021, pp. 1750–1765), we demonstrate that our approach is robust and accurately predicts the antidunes’ amplitude, wavelength and celerity. Furthermore, the simulated wall shear stress, a key parameter governing sediment transport, is in excellent agreement with the experimental measurements. The highly resolved data of fluid and particle motion from our simulation approach open new perspectives for detailed studies of morphodynamics in shallow supercritical flows.
- Open Access
Particle-resolved simulation of antidunes in free-surface flows
The interaction of supercritical turbulent flows with granular sediment beds is challenging to study both experimentally and numerically; this challenging task has hampered the advances in understanding antidunes, the most characteristic bedform of supercritical flows. This article presents the first numerical attempt to simulate upstream-migrating antidunes with geometrically resolved particles and a liquid-gas interface. Our simulations provide data at a resolution higher than laboratory experiments, and they can therefore provide new insights into the mechanisms of antidune migration and contribute to a deeper understanding of the underlying physics. To manage the simulations' computational costs and physical complexity, we employ the cumulant lattice Boltzmann method in conjunction with a discrete element method for particle interactions, as well as a volume of fluid scheme to track the deformable free surface of the fluid. By reproducing two flow configurations of previous experiments (Pascal et al., Earth Surf. Proc. Land., vol. 46(9), 2021, 1750-1765), we demonstrate that our approach is robust and accurately predicts the antidunes' amplitude, wavelength, and celerity. Furthermore, the simulated wall-shear stress, a key parameter governing sediment transport, is in excellent agreement with the experimental measurements. The highly resolved data of fluid and particle motion from our simulation approach open new perspectives for detailed studies of morphodynamics in shallow supercritical flows.
Open AccessParticle-resolved simulation of antidunes in free-surface flows
The interaction of supercritical turbulent flows with granular sediment beds is challenging to study both experimentally and numerically; this challenging task has hampered the advances in understanding antidunes, the most characteristic bedform of supercritical flows. This article presents the first numerical attempt to simulate upstream-migrating antidunes with geometrically resolved particles and a liquid-gas interface. Our simulations provide data at a resolution higher than laboratory experiments, and they can therefore provide new insights into the mechanisms of antidune migration and contribute to a deeper understanding of the underlying physics. To manage the simulations' computational costs and physical complexity, we employ the cumulant lattice Boltzmann method in conjunction with a discrete element method for particle interactions, as well as a volume of fluid scheme to track the deformable free surface of the fluid. By reproducing two flow configurations of previous experiments (Pascal et al., Earth Surf. Proc. Land., vol. 46(9), 2021, 1750-1765), we demonstrate that our approach is robust and accurately predicts the antidunes' amplitude, wavelength, and celerity. Furthermore, the simulated wall-shear stress, a key parameter governing sediment transport, is in excellent agreement with the experimental measurements. The highly resolved data of fluid and particle motion from our simulation approach open new perspectives for detailed studies of morphodynamics in shallow supercritical flows.
- Open Access
Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method
The accuracy of the free-surface lattice Boltzmann method (FSLBM) depends significantly on the boundary condition employed at the free interface. Ideally, the chosen boundary condition balances the forces exerted by the liquid and gas pressure. Different variants of the same boundary condition are possible, depending on the number and choice of the particle distribution functions (PDFs) to which it is applied. This study analyzes and compares four variants, in which (i) the boundary condition is applied to all PDFs oriented in the opposite direction of the free interface's normal vector, including or (ii) excluding the central PDF. While these variants overwrite existing information, the boundary condition can also be applied (iii) to only missing PDFs without dropping available data or (iv) to only missing PDFs but at least three PDFs as suggested in the literature. It is shown that neither variant generally balances the forces exerted by the liquid and gas pressure at the free surface. The four variants' accuracy was compared in five different numerical experiments covering various applications. These include a standing gravity wave, a rectangular and cylindrical dam break, a rising Taylor bubble, and a droplet impacting a thin pool of liquid. Overall, variant (iii) was substantially more accurate than the other variants in the numerical experiments performed in this study.
Open AccessAnalysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method
The accuracy of the free-surface lattice Boltzmann method (FSLBM) depends significantly on the boundary condition employed at the free interface. Ideally, the chosen boundary condition balances the forces exerted by the liquid and gas pressure. Different variants of the same boundary condition are possible, depending on the number and choice of the particle distribution functions (PDFs) to which it is applied. This study analyzes and compares four variants, in which (i) the boundary condition is applied to all PDFs oriented in the opposite direction of the free interface's normal vector, including or (ii) excluding the central PDF. While these variants overwrite existing information, the boundary condition can also be applied (iii) to only missing PDFs without dropping available data or (iv) to only missing PDFs but at least three PDFs as suggested in the literature. It is shown that neither variant generally balances the forces exerted by the liquid and gas pressure at the free surface. The four variants' accuracy was compared in five different numerical experiments covering various applications. These include a standing gravity wave, a rectangular and cylindrical dam break, a rising Taylor bubble, and a droplet impacting a thin pool of liquid. Overall, variant (iii) was substantially more accurate than the other variants in the numerical experiments performed in this study.
- Open Access
- 21 January 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (5) , 820-850
Analysis and comparison of boundary condition variants in the free‐surface lattice Boltzmann method
- 21 January 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (5) , 820-850
Open AccessAnalysis and comparison of boundary condition variants in the free‐surface lattice Boltzmann method
- Open Access
Comparison of refilling schemes in the free-surface lattice Boltzmann method
Simulating mobile liquid-gas interfaces with the free-surface lattice Boltzmann method (FSLBM) requires frequent re-initialization of fluid flow information in computational cells that convert from gas to liquid. The corresponding algorithm, here referred to as the refilling scheme, is crucial for the successful application of the FSLBM in terms of accuracy and numerical stability. This study compares five refilling schemes that extract information from the surrounding liquid and interface cells by averaging, extrapolating, or assuming one of the three different equilibrium states. Six numerical experiments were performed, covering a broad spectrum of possible scenarios. These include a standing gravity wave, a rectangular and cylindrical dam break, a Taylor bubble, a drop impact into liquid, and a bubbly plane Poiseuille flow. In some simulations, the averaging, extrapolation, and one equilibrium-based scheme were numerically unstable. Overall, the results have shown that the simplest equilibrium-based scheme should be preferred in terms of numerical stability, computational cost, accuracy, and ease of implementation.
Open AccessComparison of refilling schemes in the free-surface lattice Boltzmann method
Simulating mobile liquid-gas interfaces with the free-surface lattice Boltzmann method (FSLBM) requires frequent re-initialization of fluid flow information in computational cells that convert from gas to liquid. The corresponding algorithm, here referred to as the refilling scheme, is crucial for the successful application of the FSLBM in terms of accuracy and numerical stability. This study compares five refilling schemes that extract information from the surrounding liquid and interface cells by averaging, extrapolating, or assuming one of the three different equilibrium states. Six numerical experiments were performed, covering a broad spectrum of possible scenarios. These include a standing gravity wave, a rectangular and cylindrical dam break, a Taylor bubble, a drop impact into liquid, and a bubbly plane Poiseuille flow. In some simulations, the averaging, extrapolation, and one equilibrium-based scheme were numerically unstable. Overall, the results have shown that the simplest equilibrium-based scheme should be preferred in terms of numerical stability, computational cost, accuracy, and ease of implementation.
- 9 November 2022
- Published by Elsevier in Journal of Computational Physics
- Vol. 473
Comparison of free-surface and conservative Allen–Cahn phase-field lattice Boltzmann method
- 9 November 2022
- Published by Elsevier in Journal of Computational Physics
- Vol. 473
Comparison of free-surface and conservative Allen–Cahn phase-field lattice Boltzmann method
- Open Access
- 1 November 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (11) , 115324
Comparison of refilling schemes in the free-surface lattice Boltzmann method
Simulating mobile liquid–gas interfaces with the free-surface lattice Boltzmann method (FSLBM) requires frequent re-initialization of fluid flow information in computational cells that convert from gas to liquid. The corresponding algorithm, here referred to as the refilling scheme, is crucial for the successful application of the FSLBM in terms of accuracy and numerical stability. This study compares five refilling schemes that extract information from the surrounding liquid and interface cells by averaging, extrapolating, or assuming one of the three different equilibrium states. Six numerical experiments were performed, covering a broad spectrum of possible scenarios. These include a standing gravity wave, a rectangular and cylindrical dam break, a Taylor bubble, a drop impact into liquid, and a bubbly plane Poiseuille flow. In some simulations, the averaging, extrapolation, and one equilibrium-based scheme were numerically unstable. Overall, the results have shown that the simplest equilibrium-based scheme should be preferred in terms of numerical stability, computational cost, accuracy, and ease of implementation.
- 1 November 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (11) , 115324
Open AccessComparison of refilling schemes in the free-surface lattice Boltzmann method
Simulating mobile liquid–gas interfaces with the free-surface lattice Boltzmann method (FSLBM) requires frequent re-initialization of fluid flow information in computational cells that convert from gas to liquid. The corresponding algorithm, here referred to as the refilling scheme, is crucial for the successful application of the FSLBM in terms of accuracy and numerical stability. This study compares five refilling schemes that extract information from the surrounding liquid and interface cells by averaging, extrapolating, or assuming one of the three different equilibrium states. Six numerical experiments were performed, covering a broad spectrum of possible scenarios. These include a standing gravity wave, a rectangular and cylindrical dam break, a Taylor bubble, a drop impact into liquid, and a bubbly plane Poiseuille flow. In some simulations, the averaging, extrapolation, and one equilibrium-based scheme were numerically unstable. Overall, the results have shown that the simplest equilibrium-based scheme should be preferred in terms of numerical stability, computational cost, accuracy, and ease of implementation.
- 24 January 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1) , e17615
Particle‐resolved turbulent flow in a packed bed: RANS, LES, and DNS simulations
Packed bed reactors are widely used to perform solid‐catalyzed gas‐phase reactions and local turbulence is known to influence heat and mass transfer characteristics. We have investigated turbulence characteristics in a packed bed of 113 spherical particles by performing particle‐resolved Reynolds‐averaged Navier–Stokes (RANS) simulations, Large Eddy Simulation (LES), and Direct Numerical Simulation (DNS). The predictions of the RANS and LES simulations are validated with the lattice Boltzmann method (LBM)–based DNS at particle Reynolds number (Rep) of 600. The RANS and LES simulations can predict the velocity, strain rate, and vorticity with a reasonable accuracy. Due to the dominance of enhanced wall‐function treatment, the turbulence characteristics predicted by the ε‐based models are found to be in a good agreement with the DNS. The ω‐based models under‐predicted the turbulence quantities by several orders of magnitude due to their inadequacy in handling strongly wall‐dominated flows at low Rep. Using the DNS performed at different Rep, we also show that the onset of turbulence occurs between .
- 24 January 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1) , e17615
Particle‐resolved turbulent flow in a packed bed: RANS, LES, and DNS simulations
Packed bed reactors are widely used to perform solid‐catalyzed gas‐phase reactions and local turbulence is known to influence heat and mass transfer characteristics. We have investigated turbulence characteristics in a packed bed of 113 spherical particles by performing particle‐resolved Reynolds‐averaged Navier–Stokes (RANS) simulations, Large Eddy Simulation (LES), and Direct Numerical Simulation (DNS). The predictions of the RANS and LES simulations are validated with the lattice Boltzmann method (LBM)–based DNS at particle Reynolds number (Rep) of 600. The RANS and LES simulations can predict the velocity, strain rate, and vorticity with a reasonable accuracy. Due to the dominance of enhanced wall‐function treatment, the turbulence characteristics predicted by the ε‐based models are found to be in a good agreement with the DNS. The ω‐based models under‐predicted the turbulence quantities by several orders of magnitude due to their inadequacy in handling strongly wall‐dominated flows at low Rep. Using the DNS performed at different Rep, we also show that the onset of turbulence occurs between .
- Open Access
- 5 September 2020
- Published by Springer Nature in Computational Geosciences
- Vol. 25 (2) , 621-635
Validation and calibration of coupled porous-medium and free-flow problems using pore-scale resolved models
The correct choice of interface conditions and effective parameters for coupled macroscale free-flow and porous-medium models is crucial for a complete mathematical description of the problem under consideration and for accurate numerical simulation of applications. We consider single-fluid-phase systems described by the Stokes–Darcy model. Different sets of coupling conditions for this model are available. However, the choice of these conditions and effective model parameters is often arbitrary. We use large-scale lattice Boltzmann simulations to validate coupling conditions by comparison of the macroscale simulations against pore-scale resolved models. We analyse three settings (lid-driven cavity over a porous bed, infiltration problem and general filtration problem) with different geometrical configurations (channelised and staggered distributions of solid grains) and different sets of interface conditions. Effective parameters for the macroscale models (permeability tensor, boundary layer constants) are computed numerically for each geometrical configuration. Numerical simulation results demonstrate the sensitivity of the coupled Stokes–Darcy problem to the location of the sharp fluid–porous interface, the effective model parameters and the interface conditions.
- 5 September 2020
- Published by Springer Nature in Computational Geosciences
- Vol. 25 (2) , 621-635
Open AccessValidation and calibration of coupled porous-medium and free-flow problems using pore-scale resolved models
The correct choice of interface conditions and effective parameters for coupled macroscale free-flow and porous-medium models is crucial for a complete mathematical description of the problem under consideration and for accurate numerical simulation of applications. We consider single-fluid-phase systems described by the Stokes–Darcy model. Different sets of coupling conditions for this model are available. However, the choice of these conditions and effective model parameters is often arbitrary. We use large-scale lattice Boltzmann simulations to validate coupling conditions by comparison of the macroscale simulations against pore-scale resolved models. We analyse three settings (lid-driven cavity over a porous bed, infiltration problem and general filtration problem) with different geometrical configurations (channelised and staggered distributions of solid grains) and different sets of interface conditions. Effective parameters for the macroscale models (permeability tensor, boundary layer constants) are computed numerically for each geometrical configuration. Numerical simulation results demonstrate the sensitivity of the coupled Stokes–Darcy problem to the location of the sharp fluid–porous interface, the effective model parameters and the interface conditions.
- Open Access
Validation and calibration of coupled porous-medium and free-flow problems using pore-scale resolved models
The correct choice of interface conditions and effective parameters for coupled macroscale free-flow and porous-medium models is crucial for a complete mathematical description of the problem under consideration and for accurate numerical simulation of applications. We consider single-fluid-phase systems described by the Stokes-Darcy model. Different sets of coupling conditions for this model are available. However, the choice of these conditions and effective model parameters is often arbitrary. We use large scale lattice Boltzmann simulations to validate coupling conditions by comparison of the macroscale simulations against pore-scale resolved models. We analyse two settings (lid driven cavity over a porous bed and infiltration problem) with different geometrical configurations (channelised and staggered distributions of solid grains) and different sets of interface conditions. Effective parameters for the macroscale models are computed numerically for each geometrical configuration. Numerical simulation results demonstrate the sensitivity of the coupled Stokes-Darcy problem to the location of the sharp fluid-porous interface, the effective model parameters and the interface conditions.
Open AccessValidation and calibration of coupled porous-medium and free-flow problems using pore-scale resolved models
The correct choice of interface conditions and effective parameters for coupled macroscale free-flow and porous-medium models is crucial for a complete mathematical description of the problem under consideration and for accurate numerical simulation of applications. We consider single-fluid-phase systems described by the Stokes-Darcy model. Different sets of coupling conditions for this model are available. However, the choice of these conditions and effective model parameters is often arbitrary. We use large scale lattice Boltzmann simulations to validate coupling conditions by comparison of the macroscale simulations against pore-scale resolved models. We analyse two settings (lid driven cavity over a porous bed and infiltration problem) with different geometrical configurations (channelised and staggered distributions of solid grains) and different sets of interface conditions. Effective parameters for the macroscale models are computed numerically for each geometrical configuration. Numerical simulation results demonstrate the sensitivity of the coupled Stokes-Darcy problem to the location of the sharp fluid-porous interface, the effective model parameters and the interface conditions.