Sanaz Shafian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sanaz Shafian has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Milad Vahidi
School of Plant and Environmental Sciences, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA
4 shared publications - Rory O. Maguire
Dep. of Crop and Soil Environmental Sciences, Virginia Tech, Blacksburg, VA 24061, USA
2 shared publications - Summer Thomas
School of Plant and Environmental Sciences, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA
2 shared publications - Cornelia Weltzien
FG Agromechatronik, Institut für Maschinenkonstruktion und Systemtechnik, Technische Universität Berlin, Straße des 17. Juni 144, 10623 Berlin, Germany
1 shared publication - John Herschel Fike
School of Plant and Environmental Sciences, Virginia Tech, Blacksburg, VA 24061, USA
1 shared publication - Michael Schirrmann
Leibniz Institute for Agricultural Engineering and Bioeconomy, Max-Eyth-Allee 100, 14469 Potsdam, Germany
1 shared publication
Latest Publications
- Open Access
Evaluating Environmental and Crop Factors Affecting Drone-Mounted GPR Performance in Agricultural Fields
Drone-mounted ground-penetrating radar (GPR) systems offer new opportunities for integrating subsurface characterization into remote sensing workflows. However, the interaction between flight parameters, surface conditions, and vegetation characteristics remains poorly understood. This study investigates the impact of flight altitude, surface topography, crop presence, and canopy water content on the stability and interpretability of GPR signals collected using a drone. Field experiments were conducted under controlled conditions using agricultural plots with variable canopy cover and soil moisture regimes. Radargrams were processed to evaluate signal amplitude, reflection continuity, and attenuation patterns in relation to terrain slope and vegetation structure derived from co-registered RGB drone imagery. The results reveal that lower flight altitudes and smoother surfaces yield higher signal coherence and greater subsurface penetration, while increased canopy water content and biomass reduce signal strength and clarity. Integrating drone-based GPR observations with surface spectral and thermal data improved discrimination between soil and vegetation-induced signal distortions. The findings highlight the potential of drone–GPR systems as a complementary layer in a multi-sensor remote sensing framework for precision agriculture, environmental monitoring, and 3D soil mapping.
Open AccessEvaluating Environmental and Crop Factors Affecting Drone-Mounted GPR Performance in Agricultural Fields
Drone-mounted ground-penetrating radar (GPR) systems offer new opportunities for integrating subsurface characterization into remote sensing workflows. However, the interaction between flight parameters, surface conditions, and vegetation characteristics remains poorly understood. This study investigates the impact of flight altitude, surface topography, crop presence, and canopy water content on the stability and interpretability of GPR signals collected using a drone. Field experiments were conducted under controlled conditions using agricultural plots with variable canopy cover and soil moisture regimes. Radargrams were processed to evaluate signal amplitude, reflection continuity, and attenuation patterns in relation to terrain slope and vegetation structure derived from co-registered RGB drone imagery. The results reveal that lower flight altitudes and smoother surfaces yield higher signal coherence and greater subsurface penetration, while increased canopy water content and biomass reduce signal strength and clarity. Integrating drone-based GPR observations with surface spectral and thermal data improved discrimination between soil and vegetation-induced signal distortions. The findings highlight the potential of drone–GPR systems as a complementary layer in a multi-sensor remote sensing framework for precision agriculture, environmental monitoring, and 3D soil mapping.
- Top Cited PapersOpen Access
Precision Soil Moisture Monitoring Through Drone-Based Hyperspectral Imaging and PCA-Driven Machine Learning
Accurately estimating soil moisture at multiple depths is essential for sustainable farming practices, as it supports efficient irrigation management, optimizes crop yields, and conserves water resources. This study integrates a drone-mounted hyperspectral sensor with machine learning techniques to enhance soil moisture estimation at 10 cm and 30 cm depths in a cornfield. The primary aim was to understand the relationship between root zone water content and canopy reflectance, pinpoint the depths where this relationship is most significant, identify the most informative wavelengths, and train a machine learning model using those wavelengths to estimate soil moisture. Our results demonstrate that PCA effectively detected critical variables for soil moisture estimation, with the ANN model outperforming other machine learning algorithms, including Random Forest (RF), Support Vector Regression (SVR), and Gradient Boosting (XGBoost). Model comparisons between irrigated and non-irrigated treatments showed that soil moisture in non-irrigated plots could be estimated with greater accuracy across various dates. This finding indicates that plants experiencing high water stress exhibit more significant spectral variability in their canopy, enhancing the correlation with soil moisture in the root zone. Moreover, over the growing season, when corn exhibits high chlorophyll content and increased resilience to environmental stressors, the correlation between canopy spectrum and root zone soil moisture weakens. Error analysis revealed the lowest relative estimation errors in non-irrigated plots at a 30 cm depth, aligning with periods of elevated water stress at shallower levels, which drove deeper root growth and strengthened the canopy reflectance relationship. This correlation corresponded to lower RMSE values, highlighting improved model accuracy.
Top Cited PapersOpen AccessPrecision Soil Moisture Monitoring Through Drone-Based Hyperspectral Imaging and PCA-Driven Machine Learning
Accurately estimating soil moisture at multiple depths is essential for sustainable farming practices, as it supports efficient irrigation management, optimizes crop yields, and conserves water resources. This study integrates a drone-mounted hyperspectral sensor with machine learning techniques to enhance soil moisture estimation at 10 cm and 30 cm depths in a cornfield. The primary aim was to understand the relationship between root zone water content and canopy reflectance, pinpoint the depths where this relationship is most significant, identify the most informative wavelengths, and train a machine learning model using those wavelengths to estimate soil moisture. Our results demonstrate that PCA effectively detected critical variables for soil moisture estimation, with the ANN model outperforming other machine learning algorithms, including Random Forest (RF), Support Vector Regression (SVR), and Gradient Boosting (XGBoost). Model comparisons between irrigated and non-irrigated treatments showed that soil moisture in non-irrigated plots could be estimated with greater accuracy across various dates. This finding indicates that plants experiencing high water stress exhibit more significant spectral variability in their canopy, enhancing the correlation with soil moisture in the root zone. Moreover, over the growing season, when corn exhibits high chlorophyll content and increased resilience to environmental stressors, the correlation between canopy spectrum and root zone soil moisture weakens. Error analysis revealed the lowest relative estimation errors in non-irrigated plots at a 30 cm depth, aligning with periods of elevated water stress at shallower levels, which drove deeper root growth and strengthened the canopy reflectance relationship. This correlation corresponded to lower RMSE values, highlighting improved model accuracy.
- Open Access
Hemp Seed Yield Responses to Nitrogen Fertility Rates
Industrial hemp (Cannabis sativa L.) holds promise as a crop for more sustainable supply chains given its potential as a source of high-strength fibers, adsorbents, and nutrient-dense feedstuffs. Developing nutrient management guidelines for hemp will be an important part of optimizing the crop’s sustainability attributes. This study measured hemp seed yield in response to N fertilization rate (0, 60, 120, 180, and 240 kg N ha−1). Treatments were tested with four hemp cultivars (‘Joey’ and ‘Grandi’ in 2020, 2021, and 2022 and ‘NWG 2463’ and ‘NWG 4113’ in 2023) in Virginia. Nitrogen input influenced (p ≤ 0.0177) seed yield in all four experimental years, although the pattern of response varied substantially. In 2020, following delayed seeding, hemp showed a weak quadratic (p = 0.0113) response to N inputs, with peak yield (1640 kg ha−1) occurring with 120 kg N ha−1. In 2021, hemp displayed a strong linear (p < 0.0001) response to N inputs, with the highest seed yield (2510 kg ha−1) at 240 kg N ha−1. In 2022, a season characterized by low precipitation and high weed pressure, a weak, linear (p = 0.0111) response to the N rate was observed. The greatest seed yield (380 kg ha−1) was again observed with 240 kg N ha−1. In 2023, weed pressure remained an issue, but the response to N was strong and linear (p < 0.0001), with the greatest seed yield (831 kg ha−1) again measured at 240 kg N ha−1. These findings indicate hemp can be quite responsive to N inputs but that the magnitude of response is sensitive to other factors such as available soil moisture, weed pressure, and growing period.
Open AccessHemp Seed Yield Responses to Nitrogen Fertility Rates
Industrial hemp (Cannabis sativa L.) holds promise as a crop for more sustainable supply chains given its potential as a source of high-strength fibers, adsorbents, and nutrient-dense feedstuffs. Developing nutrient management guidelines for hemp will be an important part of optimizing the crop’s sustainability attributes. This study measured hemp seed yield in response to N fertilization rate (0, 60, 120, 180, and 240 kg N ha−1). Treatments were tested with four hemp cultivars (‘Joey’ and ‘Grandi’ in 2020, 2021, and 2022 and ‘NWG 2463’ and ‘NWG 4113’ in 2023) in Virginia. Nitrogen input influenced (p ≤ 0.0177) seed yield in all four experimental years, although the pattern of response varied substantially. In 2020, following delayed seeding, hemp showed a weak quadratic (p = 0.0113) response to N inputs, with peak yield (1640 kg ha−1) occurring with 120 kg N ha−1. In 2021, hemp displayed a strong linear (p < 0.0001) response to N inputs, with the highest seed yield (2510 kg ha−1) at 240 kg N ha−1. In 2022, a season characterized by low precipitation and high weed pressure, a weak, linear (p = 0.0111) response to the N rate was observed. The greatest seed yield (380 kg ha−1) was again observed with 240 kg N ha−1. In 2023, weed pressure remained an issue, but the response to N was strong and linear (p < 0.0001), with the greatest seed yield (831 kg ha−1) again measured at 240 kg N ha−1. These findings indicate hemp can be quite responsive to N inputs but that the magnitude of response is sensitive to other factors such as available soil moisture, weed pressure, and growing period.
- Open Access
- 13 December 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (24) , 5714
Pasture Biomass Estimation Using Ultra-High-Resolution RGB UAVs Images and Deep Learning
The continuous assessment of grassland biomass during the growth season plays a vital role in making informed, location-specific management choices. The implementation of precision agriculture techniques can facilitate and enhance these decision-making processes. Nonetheless, precision agriculture depends on the availability of prompt and precise data pertaining to plant characteristics, necessitating both high spatial and temporal resolutions. Utilizing structural and spectral attributes extracted from low-cost sensors on unmanned aerial vehicles (UAVs) presents a promising non-invasive method to evaluate plant traits, including above-ground biomass and plant height. Therefore, the main objective was to develop an artificial neural network capable of estimating pasture biomass by using UAV RGB images and the canopy height models (CHM) during the growing season over three common types of paddocks: Rest, bale grazing, and sacrifice. Subsequently, this study first explored the variation of structural and color-related features derived from statistics of CHM and RGB image values under different levels of plant growth. Then, an ANN model was trained for accurate biomass volume estimation based on a rigorous assessment employing statistical criteria and ground observations. The model demonstrated a high level of precision, yielding a coefficient of determination (R2) of 0.94 and a root mean square error (RMSE) of 62 (g/m2). The evaluation underscores the critical role of ultra-high-resolution photogrammetric CHMs and red, green, and blue (RGB) values in capturing meaningful variations and enhancing the model’s accuracy across diverse paddock types, including bale grazing, rest, and sacrifice paddocks. Furthermore, the model’s sensitivity to areas with minimal or virtually absent biomass during the plant growth period is visually demonstrated in the generated maps. Notably, it effectively discerned low-biomass regions in bale grazing paddocks and areas with reduced biomass impact in sacrifice paddocks compared to other types. These findings highlight the model’s versatility in estimating biomass across a range of scenarios, making it well suited for deployment across various paddock types and environmental conditions.
- 13 December 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (24) , 5714
Open AccessPasture Biomass Estimation Using Ultra-High-Resolution RGB UAVs Images and Deep Learning
The continuous assessment of grassland biomass during the growth season plays a vital role in making informed, location-specific management choices. The implementation of precision agriculture techniques can facilitate and enhance these decision-making processes. Nonetheless, precision agriculture depends on the availability of prompt and precise data pertaining to plant characteristics, necessitating both high spatial and temporal resolutions. Utilizing structural and spectral attributes extracted from low-cost sensors on unmanned aerial vehicles (UAVs) presents a promising non-invasive method to evaluate plant traits, including above-ground biomass and plant height. Therefore, the main objective was to develop an artificial neural network capable of estimating pasture biomass by using UAV RGB images and the canopy height models (CHM) during the growing season over three common types of paddocks: Rest, bale grazing, and sacrifice. Subsequently, this study first explored the variation of structural and color-related features derived from statistics of CHM and RGB image values under different levels of plant growth. Then, an ANN model was trained for accurate biomass volume estimation based on a rigorous assessment employing statistical criteria and ground observations. The model demonstrated a high level of precision, yielding a coefficient of determination (R2) of 0.94 and a root mean square error (RMSE) of 62 (g/m2). The evaluation underscores the critical role of ultra-high-resolution photogrammetric CHMs and red, green, and blue (RGB) values in capturing meaningful variations and enhancing the model’s accuracy across diverse paddock types, including bale grazing, rest, and sacrifice paddocks. Furthermore, the model’s sensitivity to areas with minimal or virtually absent biomass during the plant growth period is visually demonstrated in the generated maps. Notably, it effectively discerned low-biomass regions in bale grazing paddocks and areas with reduced biomass impact in sacrifice paddocks compared to other types. These findings highlight the model’s versatility in estimating biomass across a range of scenarios, making it well suited for deployment across various paddock types and environmental conditions.
- Open Access
- 18 October 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (20) , 5014
Estimation of Bale Grazing and Sacrificed Pasture Biomass through the Integration of Sentinel Satellite Images and Machine Learning Techniques
Quantifying the forage biomass in pastoral systems can be used for enhancing farmers’ decision-making in precision management and optimizing livestock feeding systems. In this study, we assessed the feasibility of integrating Sentinel-1 and Sentinel-2 satellite imagery with machine learning techniques to estimate the aboveground biomass and forage quality of bale grazing and sacrificed grassland areas in Virginia. The workflow comprised two steps, each addressing specific objectives. Firstly, we analyzed the temporal variation in spectral and synthetic aperture radar (SAR) variables derived from Sentinel-1 and Sentinel-2 time series images. Subsequently, we evaluated the contribution of these variables with the estimation of grassland biomass using three machine learning algorithms, as follows: support vector regression (SVR), random forest (RF), and artificial neural network (ANN). The quantitative assessment of the models demonstrates that the ANN algorithm outperforms the other approaches when estimating pasture biomass. The developed ANN model achieved an R2 of 0.83 and RMSE of 6.68 kg/100 sq. meter. The evaluation of feature importance revealed that VV and VH polarizations play a significant role in the model, indicating the SAR sensor’s ability to perceive changes in plant structure during the growth period. Additionally, the blue, green, and NIR bands were identified as the most influential spectral variables in the model, underscoring the alterations in the spectrum of the pasture over time.
- 18 October 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (20) , 5014
Open AccessEstimation of Bale Grazing and Sacrificed Pasture Biomass through the Integration of Sentinel Satellite Images and Machine Learning Techniques
Quantifying the forage biomass in pastoral systems can be used for enhancing farmers’ decision-making in precision management and optimizing livestock feeding systems. In this study, we assessed the feasibility of integrating Sentinel-1 and Sentinel-2 satellite imagery with machine learning techniques to estimate the aboveground biomass and forage quality of bale grazing and sacrificed grassland areas in Virginia. The workflow comprised two steps, each addressing specific objectives. Firstly, we analyzed the temporal variation in spectral and synthetic aperture radar (SAR) variables derived from Sentinel-1 and Sentinel-2 time series images. Subsequently, we evaluated the contribution of these variables with the estimation of grassland biomass using three machine learning algorithms, as follows: support vector regression (SVR), random forest (RF), and artificial neural network (ANN). The quantitative assessment of the models demonstrates that the ANN algorithm outperforms the other approaches when estimating pasture biomass. The developed ANN model achieved an R2 of 0.83 and RMSE of 6.68 kg/100 sq. meter. The evaluation of feature importance revealed that VV and VH polarizations play a significant role in the model, indicating the SAR sensor’s ability to perceive changes in plant structure during the growth period. Additionally, the blue, green, and NIR bands were identified as the most influential spectral variables in the model, underscoring the alterations in the spectrum of the pasture over time.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Soil Water Content Estimation Using Drone-Based Ground Penetrating Radar and Machine Learning Techniques
Soil water content (SWC) is an essential climatic variable that plays a leading role in different soil-related applications in the ecosystem. Especially in agriculture, SWC controls the plants' growth and soil productivity, so its accurate estimation could improve the crops’ yields and provide necessary information to optimize water consumption in precision farming.Optical sensors cannot accurately measure SWC in agricultural parcels, because agricultural fields are predominantly vegetated and covered with plants with high biomass. A Ground Penetrating Radar (GPR) sensor that can penetrate the ground and record pertinent information on soil roughness and its dielectric constant could be a solution for SWC monitoring in agricultural fields.In this study, we investigate the potential of a GPR sensor mounted on a drone for monitoring SWC on a profile scale from the surface to a specified depth. The results demonstrated that both the GPR reflection and derivative variables associated with the amplitude could be utilized as informative input variables in an Artificial Neural Network model for the estimation of the SWC.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessSoil Water Content Estimation Using Drone-Based Ground Penetrating Radar and Machine Learning Techniques
Soil water content (SWC) is an essential climatic variable that plays a leading role in different soil-related applications in the ecosystem. Especially in agriculture, SWC controls the plants' growth and soil productivity, so its accurate estimation could improve the crops’ yields and provide necessary information to optimize water consumption in precision farming.Optical sensors cannot accurately measure SWC in agricultural parcels, because agricultural fields are predominantly vegetated and covered with plants with high biomass. A Ground Penetrating Radar (GPR) sensor that can penetrate the ground and record pertinent information on soil roughness and its dielectric constant could be a solution for SWC monitoring in agricultural fields.In this study, we investigate the potential of a GPR sensor mounted on a drone for monitoring SWC on a profile scale from the surface to a specified depth. The results demonstrated that both the GPR reflection and derivative variables associated with the amplitude could be utilized as informative input variables in an Artificial Neural Network model for the estimation of the SWC.
- Open Access
- 26 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (3) , 585
UAV Oblique Imagery with an Adaptive Micro-Terrain Model for Estimation of Leaf Area Index and Height of Maize Canopy from 3D Point Clouds
Leaf area index (LAI) and height are two critical measures of maize crops that are used in ecophysiological and morphological studies for growth evaluation, health assessment, and yield prediction. However, mapping spatial and temporal variability of LAI in fields using handheld tools and traditional techniques is a tedious and costly pointwise operation that provides information only within limited areas. The objective of this study was to evaluate the reliability of mapping LAI and height of maize canopy from 3D point clouds generated from UAV oblique imagery with the adaptive micro-terrain model. The experiment was carried out in a field planted with three cultivars having different canopy shapes and four replicates covering a total area of 48 × 36 m. RGB images in nadir and oblique view were acquired from the maize field at six different time slots during the growing season. Images were processed by Agisoft Metashape to generate 3D point clouds using the structure from motion method and were later processed by MATLAB to obtain clean canopy structure, including height and density. The LAI was estimated by a multivariate linear regression model using crop canopy descriptors derived from the 3D point cloud, which account for height and leaf density distribution along the canopy height. A simulation analysis based on the Sine function effectively demonstrated the micro-terrain model from point clouds. For the ground truth data, a randomized block design with 24 sample areas was used to manually measure LAI, height, N-pen data, and yield during the growing season. It was found that canopy height data from the 3D point clouds has a relatively strong correlation (R2 = 0.89, 0.86, 0.78) with the manual measurement for three cultivars with CH90. The proposed methodology allows a cost-effective high-resolution mapping of in-field LAI index extraction through UAV 3D data to be used as an alternative to the conventional LAI assessments even in inaccessible regions.
- 26 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (3) , 585
Open AccessUAV Oblique Imagery with an Adaptive Micro-Terrain Model for Estimation of Leaf Area Index and Height of Maize Canopy from 3D Point Clouds
Leaf area index (LAI) and height are two critical measures of maize crops that are used in ecophysiological and morphological studies for growth evaluation, health assessment, and yield prediction. However, mapping spatial and temporal variability of LAI in fields using handheld tools and traditional techniques is a tedious and costly pointwise operation that provides information only within limited areas. The objective of this study was to evaluate the reliability of mapping LAI and height of maize canopy from 3D point clouds generated from UAV oblique imagery with the adaptive micro-terrain model. The experiment was carried out in a field planted with three cultivars having different canopy shapes and four replicates covering a total area of 48 × 36 m. RGB images in nadir and oblique view were acquired from the maize field at six different time slots during the growing season. Images were processed by Agisoft Metashape to generate 3D point clouds using the structure from motion method and were later processed by MATLAB to obtain clean canopy structure, including height and density. The LAI was estimated by a multivariate linear regression model using crop canopy descriptors derived from the 3D point cloud, which account for height and leaf density distribution along the canopy height. A simulation analysis based on the Sine function effectively demonstrated the micro-terrain model from point clouds. For the ground truth data, a randomized block design with 24 sample areas was used to manually measure LAI, height, N-pen data, and yield during the growing season. It was found that canopy height data from the 3D point clouds has a relatively strong correlation (R2 = 0.89, 0.86, 0.78) with the manual measurement for three cultivars with CH90. The proposed methodology allows a cost-effective high-resolution mapping of in-field LAI index extraction through UAV 3D data to be used as an alternative to the conventional LAI assessments even in inaccessible regions.