Alain Morand
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Alain Morand has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Guillermo Martin
Université Grenoble Alpes, CNRS, IPAG
4 shared publicationsPierre Benech
Université Grenoble Alpes, CNRS, Grenoble INP, CROMAhttps://ror.org/050rs7291, Grenoble, France
4 shared publications- Guodong Zhang
Northwestern Polytechnical University
3 shared publications - Razvan Stoian
Université Jean Monnet
3 shared publications Ciro D'Amico
Université de Lyon, Université Jean Monnet
2 shared publications- David Riassetto
Univ. Grenoble Alpes, CNRS, Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), LMGP, F-38000 Grenoble, France
2 shared publications
Latest Publications
- 1 September 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 43 (9) , 1518-1527
Wavelength laser source detection with 20 pm resolution over a 70 nm spectral bandwidth
SWIFTS is an integrated microspectrometer that achieves high spectral resolution by probing an optical waveguide, the ultimate integration for obtaining a long interferogram. However, due to undersampling, the usable repetitive spectral band is limited. However, this spectral band can be doubled while improving spectral resolution by using a specific algorithm associated with a calibration table. Here, an analytical model is detailed to explain this improvement and is validated by experimental results. Thanks to this development, a new design is proposed to widen the spectral band from 7 to 70 nm with a spectral resolution of 20 pm.
- 1 September 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 43 (9) , 1518-1527
Wavelength laser source detection with 20 pm resolution over a 70 nm spectral bandwidth
SWIFTS is an integrated microspectrometer that achieves high spectral resolution by probing an optical waveguide, the ultimate integration for obtaining a long interferogram. However, due to undersampling, the usable repetitive spectral band is limited. However, this spectral band can be doubled while improving spectral resolution by using a specific algorithm associated with a calibration table. Here, an analytical model is detailed to explain this improvement and is validated by experimental results. Thanks to this development, a new design is proposed to widen the spectral band from 7 to 70 nm with a spectral resolution of 20 pm.
- Open Access
- 20 February 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (4) , 7138-7147
Ultrafast laser-written 3D nano-antenna for flux extraction and vertical focusing above near-infrared waveguides
Ultrafast laser photoinscription of transparent materials has a unique capacity to generate tunable positive and negative multiscale index structures in flexible 3D designs. Combined with the employment of engineered non-diffractive beams, this enables the generation at the same time of micrometric size waveguides for efficient transport of optical signals and high aspect ratio nanostructures capable of nonperturbatively sampling the optical field propagating nearby in the waveguides, enabling therefore the implementation of signal extraction or antenna functions. We present results for the development of 3D nanoscaled grating arrangements in nonplanar circular geometry working as antennas with focusing properties, capable therefore not only to extract a part of the flux from a waveguide but also to focalize it at a given image plane above the sample, as a function of wavelength. Different geometries were studied, all with equal focusing radius, but different spacing between the nanostructures, in order to understand the sampling and grating efficiency as a function of the number of emitters and their relative distance to the waveguides. The goal of this work is to demonstrate how the high flexibility and the 3D aspect of ultrafast laser photo-inscription of bulk transparent materials can be used for developing efficient optical antennas that could direct flux from a waveguide to a detector, without the need of any relay optics, by fabricating a grating-lens inside the chip, with potential applications in the field of integrated optics spectrometry.
- 20 February 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (4) , 7138-7147
Open AccessUltrafast laser-written 3D nano-antenna for flux extraction and vertical focusing above near-infrared waveguides
Ultrafast laser photoinscription of transparent materials has a unique capacity to generate tunable positive and negative multiscale index structures in flexible 3D designs. Combined with the employment of engineered non-diffractive beams, this enables the generation at the same time of micrometric size waveguides for efficient transport of optical signals and high aspect ratio nanostructures capable of nonperturbatively sampling the optical field propagating nearby in the waveguides, enabling therefore the implementation of signal extraction or antenna functions. We present results for the development of 3D nanoscaled grating arrangements in nonplanar circular geometry working as antennas with focusing properties, capable therefore not only to extract a part of the flux from a waveguide but also to focalize it at a given image plane above the sample, as a function of wavelength. Different geometries were studied, all with equal focusing radius, but different spacing between the nanostructures, in order to understand the sampling and grating efficiency as a function of the number of emitters and their relative distance to the waveguides. The goal of this work is to demonstrate how the high flexibility and the 3D aspect of ultrafast laser photo-inscription of bulk transparent materials can be used for developing efficient optical antennas that could direct flux from a waveguide to a detector, without the need of any relay optics, by fabricating a grating-lens inside the chip, with potential applications in the field of integrated optics spectrometry.
- Open Access
- 1 October 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (10)
A route to an all direct laser written integrated FTS (SWIFTS) in the 3.39–4.1 μm range
This work aims to present the building blocks for an all direct laser written integrated spectrometer in the mid-infrared (3.39–4.1 μm range) based on the SWIFTS (Stationary Wave Integrated Fourier Transform Spectrometer) principle. In a SWIFTS-Gabor configuration, the light from the source interferes with itself in the middle of a channel waveguide, creating a stationary wave. This interferogram is then sampled through scattering centers placed on top of the waveguide that radiate the light they extract onto a detector placed directly on the sample. Finally, the spectrum of the source is retrieved through a Fourier transform. To implement a SWIFTS, two main photonic functions are required: the waveguide and the scattering centers. In this work, both functions have been created using Direct Laser Writing (DLW), a versatile technique, allowing to easily access 3D configurations and to reduce fabrication time. DLW focuses a femtosecond laser onto a sample so as to locally change the crystal lattice, resulting in its structural modification. The waveguides presented here are surface half-circular cladding structures made through type II modifications in the sample, and the scattering centers are surface damage tracks (also referred to as grooves). These surface tracks are creating dielectric discontinuities in the evanescent part of the stationary wave, resulting in the light being radiated outside the waveguide. All of these are made in a z-cut lithium niobate substrate for future implementation of the electro-optic effect. We demonstrate that we have functional waveguides in the mid-IR and that our grooves are extracting the stationary wave as expected, showing promising results for future implementation of a complete mid-IR SWIFTS using DLW.
- 1 October 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (10)
Open AccessA route to an all direct laser written integrated FTS (SWIFTS) in the 3.39–4.1 μm range
This work aims to present the building blocks for an all direct laser written integrated spectrometer in the mid-infrared (3.39–4.1 μm range) based on the SWIFTS (Stationary Wave Integrated Fourier Transform Spectrometer) principle. In a SWIFTS-Gabor configuration, the light from the source interferes with itself in the middle of a channel waveguide, creating a stationary wave. This interferogram is then sampled through scattering centers placed on top of the waveguide that radiate the light they extract onto a detector placed directly on the sample. Finally, the spectrum of the source is retrieved through a Fourier transform. To implement a SWIFTS, two main photonic functions are required: the waveguide and the scattering centers. In this work, both functions have been created using Direct Laser Writing (DLW), a versatile technique, allowing to easily access 3D configurations and to reduce fabrication time. DLW focuses a femtosecond laser onto a sample so as to locally change the crystal lattice, resulting in its structural modification. The waveguides presented here are surface half-circular cladding structures made through type II modifications in the sample, and the scattering centers are surface damage tracks (also referred to as grooves). These surface tracks are creating dielectric discontinuities in the evanescent part of the stationary wave, resulting in the light being radiated outside the waveguide. All of these are made in a z-cut lithium niobate substrate for future implementation of the electro-optic effect. We demonstrate that we have functional waveguides in the mid-IR and that our grooves are extracting the stationary wave as expected, showing promising results for future implementation of a complete mid-IR SWIFTS using DLW.
- Open Access
Study and Optimization of a Micro-Structured Waveguiding and Fluorescent Sol-Gel Architecture
Channel waveguides with diffraction gratings at their input and output for light injection and extraction, respectively, constitute the key components for applications in integrated optics and photonics. Here, we report for the first time on such fluorescent micro-structured architecture entirely elaborated on glass by sol-gel processing. This architecture particularly takes advantage of a high-refractive index and transparent titanium oxide-based, sol-gel photoresist that can be imprinted through a single photolithography step. This resist enabled us to photo-imprint the input and output gratings on a photo-imprinted channel waveguide doped with a ruthenium complex fluorophore (Rudpp). In this paper, the elaboration conditions and optical characterizations of derived architectures are presented and discussed with respect to optical simulations. We firstly show how the optimization of a two-step deposition/insolation sol-gel procedure leads to reproducible and uniform grating/waveguide architectures elaborated on rather large dimensions. Then, we show how this reproducibility and uniformity govern the reliability of fluorescence measurements in waveguiding configuration. These measurements demonstrate that: (i) our sol-gel architecture is well adapted to the efficient channel–waveguide/diffraction grating coupling at the Rudpp excitation and emission wavelengths; (ii) it enables an efficient propagation of the emission signal in the core of the waveguide allowing its photo-detection after extraction through the output grating; and (iii) it is affected by very reduced parasitic mechanisms, such as propagation losses and photobleaching features. This work constitutes a promising preliminary step toward the integration of our architecture in a microfluidic platform for further fluorescence measurements in liquid medium and waveguiding configuration.
Open AccessStudy and Optimization of a Micro-Structured Waveguiding and Fluorescent Sol-Gel Architecture
Channel waveguides with diffraction gratings at their input and output for light injection and extraction, respectively, constitute the key components for applications in integrated optics and photonics. Here, we report for the first time on such fluorescent micro-structured architecture entirely elaborated on glass by sol-gel processing. This architecture particularly takes advantage of a high-refractive index and transparent titanium oxide-based, sol-gel photoresist that can be imprinted through a single photolithography step. This resist enabled us to photo-imprint the input and output gratings on a photo-imprinted channel waveguide doped with a ruthenium complex fluorophore (Rudpp). In this paper, the elaboration conditions and optical characterizations of derived architectures are presented and discussed with respect to optical simulations. We firstly show how the optimization of a two-step deposition/insolation sol-gel procedure leads to reproducible and uniform grating/waveguide architectures elaborated on rather large dimensions. Then, we show how this reproducibility and uniformity govern the reliability of fluorescence measurements in waveguiding configuration. These measurements demonstrate that: (i) our sol-gel architecture is well adapted to the efficient channel–waveguide/diffraction grating coupling at the Rudpp excitation and emission wavelengths; (ii) it enables an efficient propagation of the emission signal in the core of the waveguide allowing its photo-detection after extraction through the output grating; and (iii) it is affected by very reduced parasitic mechanisms, such as propagation losses and photobleaching features. This work constitutes a promising preliminary step toward the integration of our architecture in a microfluidic platform for further fluorescence measurements in liquid medium and waveguiding configuration.
- 18 April 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (9) , 2253-2256
Development of a 3D ultrafast laser written near-infrared spectro-interferometer
Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges. This enables 3D geometry and thus avoids in-plane crossings of waveguides that can induce losses and cross talk in multi-telescope beam combiners. The additional novel capability of the technique allows for the fabrication of high aspect ratio nanostructures nonperturbatively sampling the optical field. Combining ultrafast laser micro- and nanoprocessing with engineered beams, we present here results for the development of chip-sized silica glass integrated robust 3D three-telescope beam combiners in the near-IR range, as well as embedded diffraction gratings, for phase closure analysis and spectro-interferometry applications in astronomy.
- 18 April 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (9) , 2253-2256
Development of a 3D ultrafast laser written near-infrared spectro-interferometer
Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges. This enables 3D geometry and thus avoids in-plane crossings of waveguides that can induce losses and cross talk in multi-telescope beam combiners. The additional novel capability of the technique allows for the fabrication of high aspect ratio nanostructures nonperturbatively sampling the optical field. Combining ultrafast laser micro- and nanoprocessing with engineered beams, we present here results for the development of chip-sized silica glass integrated robust 3D three-telescope beam combiners in the near-IR range, as well as embedded diffraction gratings, for phase closure analysis and spectro-interferometry applications in astronomy.
- 16 August 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (24) , 7173-7180
Waveguide scattering antennas made by direct laser writing in bulk glass for spectrometry applications in the short-wave IR
A buried straight waveguide perturbed periodically by six antennas composed of submicronic cylinder voids is entirely fabricated using ultrafast laser photoinscription. The light scattered from each antenna is oriented vertically and is detected by a short-wave IR camera bonded to the surface of the glass with no relay optics. The response of each antenna is analyzed using a wavelength tunable laser source and compared to simulated responses verifying the behavior of the antenna. These results show the good potential of the direct laser writing technique to realize monolithic embedded detectors by combining complex optical functions within a 3D design. A wavelength meter application with a spectral resolution of 150 pm is proposed to demonstrate this combination.
- 16 August 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (24) , 7173-7180
Waveguide scattering antennas made by direct laser writing in bulk glass for spectrometry applications in the short-wave IR
A buried straight waveguide perturbed periodically by six antennas composed of submicronic cylinder voids is entirely fabricated using ultrafast laser photoinscription. The light scattered from each antenna is oriented vertically and is detected by a short-wave IR camera bonded to the surface of the glass with no relay optics. The response of each antenna is analyzed using a wavelength tunable laser source and compared to simulated responses verifying the behavior of the antenna. These results show the good potential of the direct laser writing technique to realize monolithic embedded detectors by combining complex optical functions within a 3D design. A wavelength meter application with a spectral resolution of 150 pm is proposed to demonstrate this combination.
- Open Access
Setting Up and Assessing a New Micro-Structured Waveguiding Fluorescent Architecture on Glass Entirely Elaborated by Sol–Gel Processing
Channel waveguides with diffraction gratings at their input and output for light injection and extraction, respectively, are extensively exploited for optical and photonic applications. In this paper, we report for the first time on such an architecture on glass entirely elaborated by sol–gel processing using a titanium-oxide-based photoresist that can be imprinted through a single photolithography step. This work is more particularly focused on a fluorescent architecture including channel waveguides doped with a ruthenium-complex fluorophore (tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II), Rudpp). The study demonstrates that this original sol–gel micro-structured architecture is well adapted to efficient channel waveguide/diffraction grating coupling and propagation of the fluorescence excitation and emission signals in the core of the channel waveguide. It demonstrates, in particular, a relatively large tolerance of several degrees in the angular injection fiber positioning and an important axial and vertical fiber spatial positioning tolerance of more than 100 µm at the Rudpp emission wavelength. The measurements also indicate that, in the conditions tested in this work, a Rudpp concentration of around 0.1 mM and a channel waveguide length of 2 to 5 mm offer the best trade-off in terms of excitation signal propagation and emission signal detection. This work constitutes a promising preliminary step toward the integration of our architecture into a microfluidic platform for fluorescence measurement in a liquid medium and waveguiding configuration.
Open AccessSetting Up and Assessing a New Micro-Structured Waveguiding Fluorescent Architecture on Glass Entirely Elaborated by Sol–Gel Processing
Channel waveguides with diffraction gratings at their input and output for light injection and extraction, respectively, are extensively exploited for optical and photonic applications. In this paper, we report for the first time on such an architecture on glass entirely elaborated by sol–gel processing using a titanium-oxide-based photoresist that can be imprinted through a single photolithography step. This work is more particularly focused on a fluorescent architecture including channel waveguides doped with a ruthenium-complex fluorophore (tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II), Rudpp). The study demonstrates that this original sol–gel micro-structured architecture is well adapted to efficient channel waveguide/diffraction grating coupling and propagation of the fluorescence excitation and emission signals in the core of the channel waveguide. It demonstrates, in particular, a relatively large tolerance of several degrees in the angular injection fiber positioning and an important axial and vertical fiber spatial positioning tolerance of more than 100 µm at the Rudpp emission wavelength. The measurements also indicate that, in the conditions tested in this work, a Rudpp concentration of around 0.1 mM and a channel waveguide length of 2 to 5 mm offer the best trade-off in terms of excitation signal propagation and emission signal detection. This work constitutes a promising preliminary step toward the integration of our architecture into a microfluidic platform for fluorescence measurement in a liquid medium and waveguiding configuration.
- 22 January 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (3) , 542-545
Improving the vertical radiation pattern issued from multiple nano-groove scattering centers acting as an antenna for future integrated optics Fourier transform spectrometers in the near IR
The stationary wave integrated Fourier transform spectrometer (SWIFTS) is based on the sampling of a stationary wave using nano-scattering centers on the surface of a channel waveguide. Single nano-scale scattering centers above the waveguide surface will radiate the sampled signal with wide angular distribution, which is not compatible with the buried detection area of infrared (IR) detectors, resulting in crosstalk between pixels. An implementation of multiple diffraction nano-grooves (antenna) for each sampling center is proposed as an alternative solution to improve directivity towards the detector pixel by narrowing the scattering angle of the extracted light. Its efficiency is demonstrated from both simulated and measured far-field radiative patterns exhibiting a promising method to be used for the future integrated IR-SWIFTS.
- 22 January 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (3) , 542-545
Improving the vertical radiation pattern issued from multiple nano-groove scattering centers acting as an antenna for future integrated optics Fourier transform spectrometers in the near IR
The stationary wave integrated Fourier transform spectrometer (SWIFTS) is based on the sampling of a stationary wave using nano-scattering centers on the surface of a channel waveguide. Single nano-scale scattering centers above the waveguide surface will radiate the sampled signal with wide angular distribution, which is not compatible with the buried detection area of infrared (IR) detectors, resulting in crosstalk between pixels. An implementation of multiple diffraction nano-grooves (antenna) for each sampling center is proposed as an alternative solution to improve directivity towards the detector pixel by narrowing the scattering angle of the extracted light. Its efficiency is demonstrated from both simulated and measured far-field radiative patterns exhibiting a promising method to be used for the future integrated IR-SWIFTS.
- 8 December 2017
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (35) , 9804-9808
Integrated Lloyd’s mirror on planar waveguide facet as a spectrometer
A low-cost and simple Fourier transform spectrometer based on the Lloyd’s mirror configuration is proposed in order to have a very stable interferogram. A planar waveguide coupled to a fiber injection is used to spatially disperse the optical beam. A second beam superposed to the previous one is obtained by a total reflection of the incident beam on a vertical glass face integrated in the chip by dicing with a specific circular precision saw. The interferogram at the waveguide output is imaged on a near-infrared camera with an objective lens. The contrast and the fringe period are thus dependent on the type and the fiber position and can be optimized to the pixel size and the length of the camera. Spectral resolution close to is reached with a camera with 320 pixels of 25 μm width in a wavelength range from O to L bands.- 8 December 2017
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (35) , 9804-9808
Integrated Lloyd’s mirror on planar waveguide facet as a spectrometer
A low-cost and simple Fourier transform spectrometer based on the Lloyd’s mirror configuration is proposed in order to have a very stable interferogram. A planar waveguide coupled to a fiber injection is used to spatially disperse the optical beam. A second beam superposed to the previous one is obtained by a total reflection of the incident beam on a vertical glass face integrated in the chip by dicing with a specific circular precision saw. The interferogram at the waveguide output is imaged on a near-infrared camera with an objective lens. The contrast and the fringe period are thus dependent on the type and the fiber position and can be optimized to the pixel size and the length of the camera. Spectral resolution close to is reached with a camera with 320 pixels of 25 μm width in a wavelength range from O to L bands.- Open Access
- 18 October 2011
- Published by AIP Publishing in AIP Advances
- Vol. 1 (4) , 042120
Light interference detection on-chip by integrated SNSPD counters
A SWIFTS device (Stationary Wave Integrated Fourier Transform Spectrometer) has been realized with an array of 24 Superconducting Nanowire Single Photon Detectors (SNSPD), on-chip integrated under a Si3N4 monomode rib-waveguide interferometer. Colored light around 1.55μm wavelength is introduced through end-fire coupling, producing a counter-propagative stationary interferogram over the 40nm wide, 120nm spaced, 4nm thick epi-NbN nanowire array. Modulations in the source bandwidth have been detected using individual waveguide coupled SNSPDs operating in single photon counting mode, which is a step towards light spectrum reconstruction by inverse Fourier transform of the stationary wave intensity. We report the design, fabrication process and in-situ measurement at 4.2K of light power modulation in the interferometer, obtained with variable laser wavelength. Such micro-SWIFTS configuration with 160nm sampling period over 3.84μm distance allows a spectral bandwidth of 2μm and a wavelength resolution of 170nm. The light interferences direct sampling ability is unique and raises wide interest with several potential applications like fringe-tracking, metrology, cryptography or optical tomography.
- 18 October 2011
- Published by AIP Publishing in AIP Advances
- Vol. 1 (4) , 042120
Open AccessLight interference detection on-chip by integrated SNSPD counters
A SWIFTS device (Stationary Wave Integrated Fourier Transform Spectrometer) has been realized with an array of 24 Superconducting Nanowire Single Photon Detectors (SNSPD), on-chip integrated under a Si3N4 monomode rib-waveguide interferometer. Colored light around 1.55μm wavelength is introduced through end-fire coupling, producing a counter-propagative stationary interferogram over the 40nm wide, 120nm spaced, 4nm thick epi-NbN nanowire array. Modulations in the source bandwidth have been detected using individual waveguide coupled SNSPDs operating in single photon counting mode, which is a step towards light spectrum reconstruction by inverse Fourier transform of the stationary wave intensity. We report the design, fabrication process and in-situ measurement at 4.2K of light power modulation in the interferometer, obtained with variable laser wavelength. Such micro-SWIFTS configuration with 160nm sampling period over 3.84μm distance allows a spectral bandwidth of 2μm and a wavelength resolution of 170nm. The light interferences direct sampling ability is unique and raises wide interest with several potential applications like fringe-tracking, metrology, cryptography or optical tomography.