YLYulia V. Loskutova

Yulia V. Loskutova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yulia V. Loskutova has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structural and Rheological Properties of Highly Paraffinic Crude Oils Exposed to Magnetic Fields

    by Valeriya A. Isanova, Yulia V. Loskutova

    This study examines the effects of magnetic fields on the structural and rheological behavior of two highly paraffinic crude oils from the West Siberian oil-and-gas basin (Verkhne-Salatskoye and Vostochno-Kamennoye fields). The oils differed in their concentrations of n-alkanes and resin–asphaltene components (RACs), with saturate-to-RAC ratios of 25.3 and 8.2, respectively. The most pronounced improvement in rheological and energy parameters was observed for the oil with the lower ratio (8.2). Following magnetic treatment, the static viscosity of the studied samples decreased by 27 and 40%, while the intrinsic fracture energy of the dispersed system declined by 38 and 84%, respectively. We propose that magnetic treatment disrupts weak hydrogen bonds, generating additional reactive sites on paramagnetic asphaltene and diamagnetic resin molecules. The reactivity of both the whole crude oils and their isolated resins and asphaltenes was significantly altered: magnetic exposure produced species that differed not only in size and structure but also in antioxidant properties. These findings offer a pathway for the in-depth evaluation of magnetic treatment effects on the structural and rheological properties of highly paraffinic oils with varying ratios of high-molecular-weight components.

  • Effect of Aqueous-Phase Salinity on the Content and Composition of Asphaltenes Precipitated from Water-in-Oil Emulsions

    by Natalia V. Yudina, Irina V. Prozorova, Yulia V. Loskutova, Alexandra N. Werner, Valeriya A. Isanova

    This study examines the influence of aqueous-phase concentration and salinity on the formation of precipitates in water-in-oil emulsions. Precipitates were isolated from the crude oil and from its emulsions with deionized water and formation waters of varying salinities (52.0–312.6 g/dm3), and then characterized. Water droplets were larger in the emulsions than in the precipitates, and their size depended on the salinity of the aqueous phase. Higher formation-water salinity corresponded to higher asphaltene content and lower resin content in the precipitates, whereas paraffin content remained largely unchanged. The molecular weight of asphaltenes in the precipitates obtained from emulsions with formation waters and deionized water increased significantly compared to that in the parent crude oil. Furthermore, asphaltenes precipitated from formation-water emulsions exhibited higher contents of carboxylic and sulfoxide groups.

  • Colloidal Dispersion Properties of Oil Emulsions in an Electromagnetic Field

    by Yu. V. Loskutova, N. V. Yudina

    The effect of electromagnetic field on colloidal dispersion properties of water–oil emulsions of two resinous low-paraffin oils was studied. It was s


  • Structural and Rheological Behaviors and Aggregation of Thermally Pretreated Highly Paraffinic Crude Oils

    by Yu. V. Loskutova, L. V. Chekantseva, N. V. Yudina

    The paper describes the structural and rheological investigation of two thermally pretreated highly paraffinic resinous crude oils, specifically the oils from the South-Maiskoye oil field (SM) and from the Archinskoye oil and gas condensate field (AR). Pretreating SM (asphaltene/resin ratio ≈ 0.09) at 40°C induced an anomalous rise in both viscosity–temperature behavior and asphalt–resin–paraffin deposit (ARPD) formation—in contrast to pretreatment of the same oil at 10, 20, and 60°C. For AR (with its asphaltene/resin ratio of about 0.23), elevating the pretreatment temperature to 60°C decreased the viscosity and pour point and increased the concentrations of resinous-asphaltenic components and solid n-alkanes in the ARPDs. Photon correlation spectroscopy revealed a spontaneous growth of aggregates when the SM oil was cooled from 35 to 25°C. Cooling the AR oil from 50 to 35°C generated large and small aggregates simultaneously.


  • Effects of Aqueous Phase Composition on the Stability of Water-In-Oil Emulsions

    by Yu. V. Loskutova, N. V. Yudina

    The paper investigates the effects of the salinity and pH of an aqueous phase, as well as the influence of asphaltene content in crude oil, on emulsification—specifically on the formation of an interfacial layer and the stability of emulsion. The oil–water interfacial tension, water droplet size, and emulsion stability were characterized using the bottle test method. The oil–distilled water interfacial tension in emulsions varies widely. Compared to distilled water, emulsions with high-salinity reservoir waters are distinguished by high stability and a lower interfacial tension. Asphaltenes that are concentrated in the interfacial layer of an emulsion with high-salinity reservoir water have a higher molecular weight than asphaltenes of crude oils and of emulsions with distilled water. Elemental analysis and IR spectroscopy show an increase in sulfur content in asphaltenes adsorbing at the oil–distilled water interface, and an increase in oxygen content in asphaltenes from emulsion with high-salinity-waters.


  • Heat treatment impact on structural-rheological properties of high-parafin oil

    by Natalia V. Yudina, Yulia V. Loskutova, Lilia V. Chekantseva

    Relevance. The pipeline transportation of heavy oils from the extraction site to the processing point is associated with serious problems due to their high viscosity and pour point. Oil deposits form quickly during pumping and causing flow reduction in pipe. Moreover, the increased content of hydrogen sulfide and chloride salts leads to increased rate of corrosion. Structural and mechanical properties and the yield point of highly pourable paraffinic oils depend on a variety of factors, like oil thermostatting temperature. Studying the impact of the heat treatment temperature of highly paraffinic resinous oil on its mobility will allow reducing energy consumption and optimizing the technology of oil pumping and transporting in winter conditions. Aim. To identify the critical temperature ranges for heat treatment of highly paraffinic resinous oil from the Yuzhno-Mayskoe field based on the analysis of data on structural and rheological behaviors, composition of oil sediments and changes in the radii of oil aggregates formed in the studied oil under various heat treatment conditions. Methods. Oil rheological properties were determined using a HAAKE Viscotester iQ rotational viscometer with HAAKE RheoWin measuring device and control system; oil pour point was analyzed using “Kristall” low-temperature indicator of petroleum products meter; asphaltenes were isolated using the “cold” Golde method; oil composition was determined by column liquid adsorption chromatography; oil particle size was recorded by a Photocor Complex spectrometer for dynamic and static light scattering with DynaLS data processing program. Results. The authors have studied heat treatment temperature impact on the viscosity-temperature and energy characteristics of highly paraffinic tarry oil, formation and composition of asphalt, resin and paraffin deposits. They established that the critical temperature of heat treatment is 40°C. At this temperature the densest crystallization structure is formed in the studied oil, characterized by high values of both viscosity, intensive formation of sediment, activation energy of viscous flow and internal energy of destruction of the dispersed structure. It was shown that with photon correlation spectroscopy, during oil heat treatment at 40°C, a spontaneous size increase of oil aggregates occurs in the temperature range of 35–25°C.


  • Open Access

    Rheological properties of water-oil emulsions of Archinskoe oil deposit

    by Liliya Chekantseva, Vladimir Manzhay, Yulia Loskutova, Daniil Zubarev

    Relevance. The development of new methods for regulating the rheological properties of water-oil emulsion using thermal and chemical methods will allow reducing the viscosity of oil well products and energy consumption for pumping hydrocarbon mixtures. Aim. To determine the activation energy of viscous flow and particle sizes of the internal phase of the initial emulsion of the Archinskoe deposit and the emulsion with an introduced demulsifier. Methods. All experiments required to investigate the rheological properties of colloidal disperse systems were performed using HAAKE Viscotester iQ rotational viscometer. Results. Comparative experimental studies were carried out on the effect of the introduced demulsifier on the effective viscosity of the water-oil emulsion of the Archinskoe deposit. Laboratory-scale experiments were performed using the rotational viscometry, which allows one to evaluate the dependence of viscosity on shear rate and temperature. It was established that the studied samples are liquids with pronounced non-Newtonian properties, which are a consequence of the paraffinic nature of oil and its water-oil emulsion. The structure of nanoparticles of the dispersed phase of dehydrated oil and its emulsion is discussed and justified. Using the analytical Arrhenius–Frenkel–Eyring expression, which describes the dependence of viscosity on temperature and the physical and chemical nature of the liquid system, the results of viscometrical experiments were processed and the activation energies of viscous flow and the particle size of the inverse emulsion were calculated in the absence of a demulsifier and in its presence. Laboratory experiments have confirmed that for complete dehydration of oil well products, it is not enough to introduce only a demulsifier, but it also requires heating the emulsion to a temperature sufficient to melt and dissolve paraffin particles, which form a structural and mechanical barrier situated on the surface of the emulsion droplets.

  • Antioxidant Activity of Asphaltene and Resinous Components in the Magnetic Field

    by Yu. V. Loskutova, N. V. Yudina, A. V. Lukyanets

    Using the voltammetric method of oxygen electroreduction, an analysis of the antioxidant activity of resin-asphaltene components isolated from 2 crude oils of different compositions before and after exposure to a magnetic field was carried out. For the studied asphaltenes, weakly polar and polar resins, an increase or decrease in antioxidant activity is observed with increasing sample concentration in the background electrolyte solution. Petroleum antioxidants are part of a complex colloidal structural system and are associated with it by associative interactions that arise as a result of changes in the size and activity of associates of the petroleum system as a whole.

  • Effect of Wave Treatment on the Antioxidant Activity of Resins and Asphaltenes of Heavy High-Viscosity Crude Oil

    by Yu. V. Loskutova, N. V. Sizova, N. V. Yudina

    The effect of low-frequency acoustic treatment and of constant and alternating electromagnetic fields on the reactivity of crude oil and resin–asphaltene components was studied. Irrespective of the kind of the wave treatment, the amount of asphaltenes and resins separated from the treated oil decreases owing the breakdown of aggregates of complex structural units with the release of hydrocarbons of various structures, occluded in the molecular complexes, into the liquid phase. The treatment involves cleavage of weak hydrogen bonds with the formation of additional reaction sites in paramagnetic asphaltenes and diamagnetic resins. The reactivity of both crude oil and the separated resin and asphaltene fractions significantly changes owing to the formation of new reactive structures in the physical fields. These structures differ not only in the size and structure but also in the antioxidant properties. The data obtained allow more detailed evaluation of the effect exerted by various kinds of wave treatment on the composition and structure of asphaltenes and resins of heavy high-viscosity crude.


  • Oil Deposits in Highly Paraffinic Crude Oils and in Model System

    by N. V. Yudina, Yu. V. Loskutova

    The effects of temperature gradient on the formation, composition, and strength of oil deposits were investigated. As the crude oil temperature and the wall surface temperature were lowered, the concentrations of the oil fraction and low-molecular-weight paraffins in the deposits increased; simultaneously, the amounts of resins and asphaltenes declined. In the asphalt–resin–paraffin deposits formed in an asphaltene-free oil sample, cooling led to a rise in the content of resins and a decline in the content of the oil fraction. Model experiments demonstrated that the highest inhibitory capacity with respect to paraffin wax deposition was achieved in the case of 0.5–1.0 wt % asphaltenes being added. This can be attributed to the steric effect of aromatic rings manifested in their ability to disrupt the nucleation of paraffin networks. Therefore, the model wax deposits formed after adding asphaltenes exhibited a lower strength than the samples obtained with the addition of benzene resins and alcohol–benzene resins.