Dalshad Ahmed Kareem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dalshad Ahmed Kareem has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Andam Mustafa
School of Engineering and Technology, British International University, Erbil 44001, Iraq
3 shared publications - Michał Szydłowski
Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
3 shared publications - Aumed Rahman M Amen
Department of Civil Engineering, Faculty of Engineering, Soran University, Soran 44008, Iraq
2 shared publications - Bala Kawa M. Saleem
General Directorate of Water and Sewage, Ministry of Municipalities and Tourism, Erbil 44001, Iraq
2 shared publications - Mehmet Ishak Yuce
Civil Engineering Department, Gaziantep University, Gaziantep, Türkiye
2 shared publications - Ayub Anwar Mirza
Center of languages, University of Duhok, Duhok 42001, Iraq
1 shared publication
Latest Publications
- Open Access
- 17 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1102
Mapping of Flood-Prone Areas Utilizing GIS Techniques and Remote Sensing: A Case Study of Duhok, Kurdistan Region of Iraq
One of the most common types of natural disaster, floods can happen anywhere on Earth, except in the polar regions. The severity of the damage caused by flooding can be reduced by putting proper management and protocols into place. Using remote sensing and a geospatial methodology, this study attempts to identify flood-vulnerable areas of the central district of Duhok, Iraq. The analytical hierarchy process (AHP) technique was used to give relative weights to 12 contributing parameters, including elevation, slope, distance from the river, rainfall, land use land cover, soil, lithology, topographic roughness index, topographic wetness index, aspect, the sediment transport index, and the stream power index in order to calculate the Flood Hazard Index (FHI). The relative importance of each criterion was revealed by a sensitivity analysis of the parameter values. This research developed a final flood susceptibility map and identified high-susceptible zones. This was classified anywhere from very low to very high classifications for its potential flood hazard. The generated map indicates that 44.72 km2 of the total land area of the study area in Duhok city has a very high susceptibility to flooding, and that these areas require significant attention from government authorities in order to reduce flood vulnerability.
- 17 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1102
Open AccessMapping of Flood-Prone Areas Utilizing GIS Techniques and Remote Sensing: A Case Study of Duhok, Kurdistan Region of Iraq
One of the most common types of natural disaster, floods can happen anywhere on Earth, except in the polar regions. The severity of the damage caused by flooding can be reduced by putting proper management and protocols into place. Using remote sensing and a geospatial methodology, this study attempts to identify flood-vulnerable areas of the central district of Duhok, Iraq. The analytical hierarchy process (AHP) technique was used to give relative weights to 12 contributing parameters, including elevation, slope, distance from the river, rainfall, land use land cover, soil, lithology, topographic roughness index, topographic wetness index, aspect, the sediment transport index, and the stream power index in order to calculate the Flood Hazard Index (FHI). The relative importance of each criterion was revealed by a sensitivity analysis of the parameter values. This research developed a final flood susceptibility map and identified high-susceptible zones. This was classified anywhere from very low to very high classifications for its potential flood hazard. The generated map indicates that 44.72 km2 of the total land area of the study area in Duhok city has a very high susceptibility to flooding, and that these areas require significant attention from government authorities in order to reduce flood vulnerability.
- Open Access
- 1 January 2023
- Published by Walter de Gruyter GmbH in Archives of Hydro-Engineering and Environmental Mechanics
- Vol. 70 (1) , 49-69
Numerical Analysis of Turbulent Flow over a Backward-facing Step in an Open Channel
Computational examinations of the flow field in an open channel having a single Backward--Facing Step (BFS) with a constant water depth of 1.5 m were performed. The e ects of the expansion ratio, and the flow velocity along the reattachment length, were investigated by employing two di erent expansion ratios of 1.5 and 2, and eight various flow velocities of 0.5, 1, 2, 3, 4, 5, 7.5 and 10 m/sec in the Computational Fluid Dynamic (CFD) simulations. Commercially available CFD software, ANSYS FLUENT, was used for calculations. The simulation outcomes were verified using experimental results. Moreover, analyses were performed by using two equation turbulence closure models, K-ɛ family (standard, RNG and realizable), and K-ω family (Wilcox’s and SST K-ω). The analyses have revealed that the reattachment length increases with an increase in the expansion ratio, the flow velocity and the Reynolds number. The results obtained for two expansion rates and eight di erent flow velocities have shown insignificant di erences between one turbulence closure model and the others. Furthermore, it was observed that both velocity and expansion ratios have an e ect on the reattachment zone size.
- 1 January 2023
- Published by Walter de Gruyter GmbH in Archives of Hydro-Engineering and Environmental Mechanics
- Vol. 70 (1) , 49-69
Open AccessNumerical Analysis of Turbulent Flow over a Backward-facing Step in an Open Channel
Computational examinations of the flow field in an open channel having a single Backward--Facing Step (BFS) with a constant water depth of 1.5 m were performed. The e ects of the expansion ratio, and the flow velocity along the reattachment length, were investigated by employing two di erent expansion ratios of 1.5 and 2, and eight various flow velocities of 0.5, 1, 2, 3, 4, 5, 7.5 and 10 m/sec in the Computational Fluid Dynamic (CFD) simulations. Commercially available CFD software, ANSYS FLUENT, was used for calculations. The simulation outcomes were verified using experimental results. Moreover, analyses were performed by using two equation turbulence closure models, K-ɛ family (standard, RNG and realizable), and K-ω family (Wilcox’s and SST K-ω). The analyses have revealed that the reattachment length increases with an increase in the expansion ratio, the flow velocity and the Reynolds number. The results obtained for two expansion rates and eight di erent flow velocities have shown insignificant di erences between one turbulence closure model and the others. Furthermore, it was observed that both velocity and expansion ratios have an e ect on the reattachment zone size.
- Open Access
Comparative Analysis of Developed Rainfall Intensity–Duration–Frequency Curves for Erbil with Other Iraqi Urban Areas
Rainfall Intensity–Duration–Frequency (IDF) relationships are widely used in water infrastructure design and construction. IDF curves represent the relationship between rainfall intensity, duration, and frequency, and are obtained by analyzing observed data. These relationships are critical for the safe design of flood protection structures, storm sewers, culverts, bridges, etc. In this study, the IDF curves and empirical IDF formulas for the city of Erbil were developed for the first time by employing the annual maximum rainfall data for a period of 39 years (1980–2018), which is the only available recorded data. Statistical techniques such as Gumbel and Log-Pearson Type III (LPT III) were utilized to determine the IDF curves and empirical equations from daily rainfall data for several standard durations and return periods. The correlation between the rainfall intensities obtained from IDF curves and the empirical formula presented a reliable match, with a coefficient of determination of (R2 = 1). The results were compared to previously developed IDF curves and empirical formulas in Iraqi cities to show their reliability. Moreover, the results can be an initial step for authorities to establish required guidelines in the studied area, and in the design process of the storm water infrastructure of urban basins in the future.
Open AccessComparative Analysis of Developed Rainfall Intensity–Duration–Frequency Curves for Erbil with Other Iraqi Urban Areas
Rainfall Intensity–Duration–Frequency (IDF) relationships are widely used in water infrastructure design and construction. IDF curves represent the relationship between rainfall intensity, duration, and frequency, and are obtained by analyzing observed data. These relationships are critical for the safe design of flood protection structures, storm sewers, culverts, bridges, etc. In this study, the IDF curves and empirical IDF formulas for the city of Erbil were developed for the first time by employing the annual maximum rainfall data for a period of 39 years (1980–2018), which is the only available recorded data. Statistical techniques such as Gumbel and Log-Pearson Type III (LPT III) were utilized to determine the IDF curves and empirical equations from daily rainfall data for several standard durations and return periods. The correlation between the rainfall intensities obtained from IDF curves and the empirical formula presented a reliable match, with a coefficient of determination of (R2 = 1). The results were compared to previously developed IDF curves and empirical formulas in Iraqi cities to show their reliability. Moreover, the results can be an initial step for authorities to establish required guidelines in the studied area, and in the design process of the storm water infrastructure of urban basins in the future.