YWYuanlong Wei

Yuanlong Wei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuanlong Wei has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Methane Adsorption During Pore Evolution and Its Microscale Impact on Coalbed Methane Recovery: A Case Study of Middle- and High-Rank Coals in the Western Guizhou

    by Ang Xu, Sijie Han, Yuanlong Wei, Peiming Zhou, Jinchao Zhang, Zhijun Guo

    The relationship between the pore structure characteristics and methane adsorption behavior evolution during coalification is vital for elucidating coalbed methane (CBM) storage and the impact on gas production. The middle-high rank coals collected from the Western Guizhou were analyzed by the full-scale pore structure characterization and methane adsorption isotherms. The evolution of pore, including pore type, structure, and fractal dimension, and gas adsorption behavior were established. Based on the quantitative characterization of coal samples' desorption, diffusion, and permeability capabilities, the impact of the gas storage mechanism on the gas production at the microscale and the geology-adapted technologies for gas recovery was elucidated. The results show that as the coal rank increases, the methane adsorption spaces and sites within coal undergo a substantial expansion primarily due to the enhanced development of micropores. During this process, the quantity of mesopores remains low, but their proportion increases while macropores gradually diminish. Coal petrographic and quality parameters related to the pore structure parameter exhibit a strong correlation with saturated adsorption capacity (SAC), with micropores playing a dominant role in controlling methane molecule adsorption. Coalification, on the one hand, increases the methane adsorption site, coupled with an increase in gas-solid interaction due to the condensation of macromolecular structures, leading to an increase in SAC. On the other hand, it results in a reduction in the micropore diameter and an intensification of monolayer molecular adsorption, causing a significant decrease in average adsorbed molecular layers (AAML). Therefore, the increase in SAC accompanies a decrease in AAML. Although high-rank coals exhibit higher methane desorption volume, desorption efficiency, and diffusion capacity, their low permeability characteristics hinder fluid seepage. To facilitate efficient development of high-rank CBM, it is imperative to implement geological compatibility techniques aimed at reducing solid-gas interactions within coal reservoirs and enhancing the connectivity of the pore network.


  • Open Access

    Characteristics of the Microfracture and Pore Structure of Middle- and High-Rank Coal and Their Implications for CBM Exploration and Development in Northern Guizhou

    by Haiying Ren, Zhijun Guo, Honggao Xie, Sijie Han, Xiaozhi Zhou, Lingyun Zhao, Yuanlong Wei, Wenci Qiu

    The microfracture and pore structure characteristics of coal reservoirs are crucial for coalbed methane (CBM) development. This study examines the evolution of pore and fracture structures at the microscopic level and their fractal characteristics, elucidating their impact on CBM development in the northern Guizhou coal reservoirs. The results indicate that the pores and fractures in the coal reservoirs are relatively well-developed, which facilitates the adsorption of CBM. The density of primary fractures ranges from 5.8 to 14.4 pcs/cm, while the density of secondary fractures ranges from 3.6 to 11.8 pcs/cm. As the metamorphic degree of coal increases, the density of primary fractures initially increases and then decreases, whereas the density of secondary fractures decreases with increasing metamorphic degree. With increasing vitrinite reflectance, the specific surface area and pore volume of the coal samples first decrease and then increase. The fractal dimension ranges from 2.3761 to 2.8361; as the vitrinite reflectance of the coal samples increases, the fractal dimension D1 decreases initially and then increases, while D2 decreases. In the northern Guizhou region, CBM is characterized by an enrichment model of “anticline dominance + fault-hydrogeological dual sealing” along with geological controlling factors of” burial depth controlling gas content and permeability + local fault controlling accumulation”. The research findings provide a theoretical basis for the occurrence and extraction of CBM in northern Guizhou.


  • Open Access

    Study on Mechanical Properties and Crack Propagation of Raw Coal with Different Bedding Angles based on CT Scanning

    by Tao Yuan, Yuanlong Wei, Shiwan Chen, Wei Liu, Lingyun Zhao, Xiong Zhang

    The deformation and damage characteristics of coal are the important foundation that affects the fracturing potential of coal reservoirs and the development plan of coalbed methane (CBM). To reveal the influence regulation of primary fractures and the bedding angle of coal on its failure and provide theoretical basis for CBM development, raw coal samples of no 16 coal seam in Wenjiaba Coal Mine, Zhijin County, Bijie City with different bedding angles were selected as the research object, and uniaxial compression tests were carried out on them, and CT scanning and crack reconstruction before and after sample failure were carried out. The results show that (1) the compressive strength, elastic modulus, and Poisson's ratio of coal show a strong bedding angle effect, and the changing trend of each index is basically the same. The coal samples with bedding angles of 0 and 90° are the highest, while the coal samples with bedding angles of 30° are the lowest, and the overall distribution is an approximate "U" with the increase in bedding angle. With the increase in bedding angle of 0-90°, the failure modes of coal samples are tension-shear combined failure, shear-slip failure, and splitting tension failure in turn. (2) The observation of raw coal and CT scanning show that the primary cracks in coal samples are well developed, especially in the lower part of 0° samples, the cracks in 30° samples, 60° samples, and 90° samples are evenly distributed and develop at a certain angle with the weak bedding surface, and microcracks parallel to and nearly perpendicular to the weak bedding surface are developed in 45° samples. At the same time, banded minerals in coal and rock samples are also well developed. (3) The characteristics of crack propagation and evolution in coal samples with different bedding dip angles are significantly different. The bedding dip angles and primary cracks of coal seam have a great influence on crack propagation. With different bedding angles, the propagation modes are different. The crack propagation mainly includes two ways: forming a certain angle with bedding and extending along the bedding plane. (4) The fracture characteristic parameters of coal in the primary state and after failure have the same law with the bedding dip angle, showing a trend of high at both ends and low in the middle, which is an irregular "U"-shaped distribution and has a similar law with mechanical characteristic parameters.


  • Open Access

    Regional Characteristics of Porosity and Permeability of Dahebian Syncline Coal and Its Application

    by Fuping Zhao, Yuanlong Wei

    In order to study the basic properties of coal seam thus to provide reference for coalbed methane (CBM) production, the porosity and permeability of coal from DH and WJZ regions of Dahebian syncline in Liupanshui Coalfield were systematically studied. The results shows that the porosity and permeability of coal samples in DH region are between 7.4–10.1% and 0.01 mD∼0.04 mD respectively. The permeability is obviously anisotropic, and it is distributed in a U-shape along bedding angle. The porosity and permeability in the WJZ region are between 12.4–24.85% and 0.3 mD–4.8 mD, but the correlation of permeability and bedding angle is not obvious. There are many primary cracks in coal matrix of WJZ region, while the coal of DH region is relatively complete. As a result, the porosity and permeability of WJZ coal samples are much higher than that of DH coal samples. With the change of confining pressure, obvious change has taken place in the permeability of coal in the two regions. When the confining pressure decreases from 2 to 8 MPa, the permeability loss rate of coal samples is close to 80%. The internal mechanism of the permeability loss is related to crack closure and plastic deformation caused by confining pressure. In contrast, the porosity and permeability of coal in WJZ region are much higher than those in DH region, which indicates that the permeability of the same coal seam in the same structural will have great differences and inhomogeneities. Therefore, the WJZ region is the preferred area, which can be included in the preferential exploitation plan of CBM. In addition, for the typical syncline gas reservoir in Liupanshui Coalfield, it is necessary to consider the block division according to the porosity and permeability indexes, and select the optimal block and give priority to development of CBM. Furthermore, we should pay attention to the difference and adaptability of CBM development in different regions.