Abdulwahab Ismail Mohamed Al-Kholani
Research Subjects
Abdulwahab Ismail Mohamed Al-Kholani has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Hassan Abdulwahab Al-Shamahy
Medical Microbiology and Clinical Immunology Department, Faculty of Medicine and Health Sciences, Sana’a University, Republic of Yemen
11 shared publications - Mohammed Mohammed Ali Al-Najhi
Orthodontics, Pedodontics and Prevention Department Faculty of Dentistry, Sana'a University, Yemen. Orthodontics, Pedodontics and Prevention Department Faculty of Dentistry, Genius University for Sciences & Technology, Dhamar city, Republic of Yemen
7 shared publications - Khaled Al-Haddad
Orthodontics, Pedodontics and Prevention Department Faculty of Dentistry, Sana'a University, Yemen
6 shared publications - Ibrahim Zaid Al-Shami
Department of Conservative Dentistry Faculty of Dentistry Sana'a University Republic of Yemen
5 shared publications - Mohammed A Al-Labani
Orthodontics, Pedodontics and Prevention Department Faculty of Dentistry, Sana'a University, Yemen
4 shared publications - Mohsen Ali Al-Hamzi
Department of Restorative and Esthetic Dentistry, Faculty of Dentistry, Sana’a University, Republic of Yemen. Department of Restorative and Esthetic Dentistry, Faculty of Dentistry, Thamar University, Republic of Yemen
4 shared publications
Latest Publications
- 1 October 2025
- Published by Maad Rayan Publishing Company in Journal of Iranian Dental Association
- Vol. 37 (3-4) , 77-85
Length Variation in Maxillary Central and Lateral Incisors: A CBCT Study on a sample of Yemeni Population
Background and Aim: To measure the crown and root lengths of maxillary central and lateral incisors in a sample of the Yemeni population, compare these measurements between genders, and evaluate the clinical relevance of any observed variations. Materials and Methods: Cone-beam computed tomography (CBCT) images from 100 individuals (50 males and 50 females), representing a total of 400 maxillary anterior teeth, were analyzed. Only teeth without pathology, restorations, or previous endodontic treatment were included. Crown and root lengths were measured using [Ez3D-i software], following a standardized protocol based on clearly defined anatomical reference points. Measurements were performed by two calibrated examiners to ensure consistency and reliability. Results: All examined teeth had single roots. Both crown and root lengths showed variation within and between groups (central vs. lateral and male vs. female). Lateral incisors exhibited slightly longer roots than central incisors, while males tended to have greater crown and root dimensions, though not all differences were statistically significant. Conclusion: This CBCT-based study highlights considerable variability in the crown and root dimensions of maxillary incisors within a Yemeni population. These findings underscore the importance of individualized assessment for accurate endodontic, restorative, and prosthetic planning. Future studies with larger and more diverse samples are recommended to validate these results.
- 1 October 2025
- Published by Maad Rayan Publishing Company in Journal of Iranian Dental Association
- Vol. 37 (3-4) , 77-85
Length Variation in Maxillary Central and Lateral Incisors: A CBCT Study on a sample of Yemeni Population
Background and Aim: To measure the crown and root lengths of maxillary central and lateral incisors in a sample of the Yemeni population, compare these measurements between genders, and evaluate the clinical relevance of any observed variations. Materials and Methods: Cone-beam computed tomography (CBCT) images from 100 individuals (50 males and 50 females), representing a total of 400 maxillary anterior teeth, were analyzed. Only teeth without pathology, restorations, or previous endodontic treatment were included. Crown and root lengths were measured using [Ez3D-i software], following a standardized protocol based on clearly defined anatomical reference points. Measurements were performed by two calibrated examiners to ensure consistency and reliability. Results: All examined teeth had single roots. Both crown and root lengths showed variation within and between groups (central vs. lateral and male vs. female). Lateral incisors exhibited slightly longer roots than central incisors, while males tended to have greater crown and root dimensions, though not all differences were statistically significant. Conclusion: This CBCT-based study highlights considerable variability in the crown and root dimensions of maxillary incisors within a Yemeni population. These findings underscore the importance of individualized assessment for accurate endodontic, restorative, and prosthetic planning. Future studies with larger and more diverse samples are recommended to validate these results.
- Open Access
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Influence of Reconstructive Technique and Ferrule Height on Stress Distribution in Endodontically Treated Molars: A 3D Finite Element Analysis Study
Background: Endodontically treated teeth restored with a different type of restorative technique may experience a fracture. Accurate information about the stress distribution of endodontically treated lower first molars restored with different techniques is needed. This study was conducted to investigate and analyze the influence of reconstructive technique and ferrule effect on the stress distribution of endodontically treated molars (ETM). Methods: six three-dimensional finite elements (FE) models of a mandibular first molar were constructed (via MIMIC and Solid Works software). Based on the reconstructive methods used and the presence of a ferrule, Models have been divided into model 1 with a 2mm ferrule and model 2 without a ferrule. The models were restored with cast-made posts (A1 and A2), fiber posts (B1 and B2), and endocrown (C1 and C2). A vertical, oblique, and horizontal load of 200N was applied to each 3D model, and Von Mises stress was analyzed using ANSYS software. Results: all stress values were within physiological limits under all cases of load application. Areas of maximum stress concentration were located at the loading points of the crowns for all models except the A2 model, in which maximum stress lies on the middle of the distal root. Models C1 and C2 showed the highest stress, followed by models A1 and A2. while, models B1 and B2 showed the lowest stress. The ferrule group showed more satisfactory stress distribution. Conclusions: All the reconstructive techniques can be considered adequate alternatives for restoring ETM. Models of fiber posts showed a homogeneous stress distribution while cast post and core models exhibited the highest stress. The endocrown models reduced stress in the root canal's inner wall in comparison with other models. Ferrule presence was shown a positive effect.
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Open AccessInfluence of Reconstructive Technique and Ferrule Height on Stress Distribution in Endodontically Treated Molars: A 3D Finite Element Analysis Study
Background: Endodontically treated teeth restored with a different type of restorative technique may experience a fracture. Accurate information about the stress distribution of endodontically treated lower first molars restored with different techniques is needed. This study was conducted to investigate and analyze the influence of reconstructive technique and ferrule effect on the stress distribution of endodontically treated molars (ETM). Methods: six three-dimensional finite elements (FE) models of a mandibular first molar were constructed (via MIMIC and Solid Works software). Based on the reconstructive methods used and the presence of a ferrule, Models have been divided into model 1 with a 2mm ferrule and model 2 without a ferrule. The models were restored with cast-made posts (A1 and A2), fiber posts (B1 and B2), and endocrown (C1 and C2). A vertical, oblique, and horizontal load of 200N was applied to each 3D model, and Von Mises stress was analyzed using ANSYS software. Results: all stress values were within physiological limits under all cases of load application. Areas of maximum stress concentration were located at the loading points of the crowns for all models except the A2 model, in which maximum stress lies on the middle of the distal root. Models C1 and C2 showed the highest stress, followed by models A1 and A2. while, models B1 and B2 showed the lowest stress. The ferrule group showed more satisfactory stress distribution. Conclusions: All the reconstructive techniques can be considered adequate alternatives for restoring ETM. Models of fiber posts showed a homogeneous stress distribution while cast post and core models exhibited the highest stress. The endocrown models reduced stress in the root canal's inner wall in comparison with other models. Ferrule presence was shown a positive effect.
- Open Access
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Effect of Light-Curing Modes on the Color Stability of Resin-Based Restoration Materials
Objectives: The aesthetic longevity of resin-based restoration materials is a critical factor in dental practice, as color stability directly influences patient satisfaction and the overall success of restorative procedures. This study investigates the impact of different light-curing modes on the color stability of various resin-based materials commonly used in dental restorations. Materials and Methods: A total of five resin composites were selected for this analysis, each subjected to three distinct light-curing modes: standard, high-intensity, and pulse curing. Color measurements were taken using a spectrophotometer before curing and after a simulated aging process that included exposure to staining agents and thermal cycling. The color changes were quantified using the CIEDE2000 color difference formula, which provides a more perceptually relevant assessment of color differences. Results: Results indicated that the curing mode significantly influenced the color stability of the resin composites. High-intensity curing demonstrated superior color retention compared to standard and pulse modes, particularly in materials with higher pigment concentrations. However, some composites exhibited a tendency to darken over time, regardless of the curing method employed. Conclusion: This study underscores the importance of selecting appropriate light-curing techniques to enhance the aesthetic performance of resin-based restorations. The choice of light-curing mode plays a pivotal role in the color stability of resin-based materials, which is essential for maintaining the aesthetic integrity of dental restorations over time. Further research is warranted to explore the underlying mechanisms affecting color stability and to optimize curing protocols for improved clinical outcomes.
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Open AccessEffect of Light-Curing Modes on the Color Stability of Resin-Based Restoration Materials
Objectives: The aesthetic longevity of resin-based restoration materials is a critical factor in dental practice, as color stability directly influences patient satisfaction and the overall success of restorative procedures. This study investigates the impact of different light-curing modes on the color stability of various resin-based materials commonly used in dental restorations. Materials and Methods: A total of five resin composites were selected for this analysis, each subjected to three distinct light-curing modes: standard, high-intensity, and pulse curing. Color measurements were taken using a spectrophotometer before curing and after a simulated aging process that included exposure to staining agents and thermal cycling. The color changes were quantified using the CIEDE2000 color difference formula, which provides a more perceptually relevant assessment of color differences. Results: Results indicated that the curing mode significantly influenced the color stability of the resin composites. High-intensity curing demonstrated superior color retention compared to standard and pulse modes, particularly in materials with higher pigment concentrations. However, some composites exhibited a tendency to darken over time, regardless of the curing method employed. Conclusion: This study underscores the importance of selecting appropriate light-curing techniques to enhance the aesthetic performance of resin-based restorations. The choice of light-curing mode plays a pivotal role in the color stability of resin-based materials, which is essential for maintaining the aesthetic integrity of dental restorations over time. Further research is warranted to explore the underlying mechanisms affecting color stability and to optimize curing protocols for improved clinical outcomes.
- Open Access
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Impact of First Maxillary Molar Abutment Inclination on Stress Distribution in Two Types of Zirconia Crowns: A 3D Finite Element Analysis
Background: This study aimed to evaluate the impact of abutment inclination on stress distribution in monolithic and bi-layered zirconia crowns for maxillary first molars, using three-dimensional finite element analysis (FEA). Methods: Three-dimensional models of maxillary and mandibular first molars were developed from micro-computed tomography data, incorporating detailed anatomical and material properties. Six FEA models were created to simulate three occlusal conditions: centric occlusion, palatal crossbite, and buccal crossbite. A static load of 200 N was applied in vertical, oblique, and horizontal directions to replicate physiological masticatory forces. Results: The analysis revealed marked differences in von Mises stress distribution and magnitude across crown types and abutment inclinations. Stress concentrations were notably higher under oblique and horizontal loads, especially in crossbite conditions. Monolithic zirconia crowns exhibited more uniform and favorable distribution than bi-layered crowns across all scenarios. Conclusions: The findings suggest that abutment inclination and crown type significantly influence stress behavior in zirconia restorations. Monolithic zirconia crowns are preferable for managing stress, particularly in non-ideal occlusal situations, and may contribute to enhanced durability and clinical performance.
- 15 June 2025
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 7 (2)
Open AccessImpact of First Maxillary Molar Abutment Inclination on Stress Distribution in Two Types of Zirconia Crowns: A 3D Finite Element Analysis
Background: This study aimed to evaluate the impact of abutment inclination on stress distribution in monolithic and bi-layered zirconia crowns for maxillary first molars, using three-dimensional finite element analysis (FEA). Methods: Three-dimensional models of maxillary and mandibular first molars were developed from micro-computed tomography data, incorporating detailed anatomical and material properties. Six FEA models were created to simulate three occlusal conditions: centric occlusion, palatal crossbite, and buccal crossbite. A static load of 200 N was applied in vertical, oblique, and horizontal directions to replicate physiological masticatory forces. Results: The analysis revealed marked differences in von Mises stress distribution and magnitude across crown types and abutment inclinations. Stress concentrations were notably higher under oblique and horizontal loads, especially in crossbite conditions. Monolithic zirconia crowns exhibited more uniform and favorable distribution than bi-layered crowns across all scenarios. Conclusions: The findings suggest that abutment inclination and crown type significantly influence stress behavior in zirconia restorations. Monolithic zirconia crowns are preferable for managing stress, particularly in non-ideal occlusal situations, and may contribute to enhanced durability and clinical performance.
- Open Access
- 23 October 2024
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 6 (5)
Surgical Management of Inflammatory Radicular Cyst in Maxillary Anterior Teeth: A Clinical Case Report
Inflammatory Radicular Cysts (IRCs) are odontogenic cysts resulting from chronic dental infections, typically due to pulp necrosis secondary to conditions like dental caries or trauma. They develop from epithelial remnants in periapical tissues stimulated by inflammation or immunological reactions. The cysts manifest as well-defined radiolucent lesions on radiographs, commonly in the posterior maxilla, particularly affecting lateral incisors and canines. Clinical symptoms vary from asymptomatic to mild pain and swelling, often associated with non-responsive teeth on vitality tests. Treatment options include surgical techniques like enucleation and root-end resection with retrograde filling. This case report presents the successful surgical management of a large infected radicular cyst associated with a maxillary anterior tooth, for a 39-year-old male patient reported to the Department of Conservative Dentistry, EIU Dental College and Republican Hospital, Sana'a, with a chief complaint of swelling in the upper front region. This case report aims to elucidate pathogenesis, clinical aspects, and management strategies, emphasizing the role of cone-beam computed tomography in diagnosis and treatment planning.
- 23 October 2024
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 6 (5)
Open AccessSurgical Management of Inflammatory Radicular Cyst in Maxillary Anterior Teeth: A Clinical Case Report
Inflammatory Radicular Cysts (IRCs) are odontogenic cysts resulting from chronic dental infections, typically due to pulp necrosis secondary to conditions like dental caries or trauma. They develop from epithelial remnants in periapical tissues stimulated by inflammation or immunological reactions. The cysts manifest as well-defined radiolucent lesions on radiographs, commonly in the posterior maxilla, particularly affecting lateral incisors and canines. Clinical symptoms vary from asymptomatic to mild pain and swelling, often associated with non-responsive teeth on vitality tests. Treatment options include surgical techniques like enucleation and root-end resection with retrograde filling. This case report presents the successful surgical management of a large infected radicular cyst associated with a maxillary anterior tooth, for a 39-year-old male patient reported to the Department of Conservative Dentistry, EIU Dental College and Republican Hospital, Sana'a, with a chief complaint of swelling in the upper front region. This case report aims to elucidate pathogenesis, clinical aspects, and management strategies, emphasizing the role of cone-beam computed tomography in diagnosis and treatment planning.
- Open Access
- 1 October 2024
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 6 (4)
A Clinical Comparison Between New and Conventional Methods for Quantification of Intended and Fabricated Dental Porcelain Color
Introduction: The accurate selection of dental porcelain shades is crucial for achieving natural-looking and aesthetically pleasing restorations. This study aimed to compare the effectiveness of various shade selection methods, including visual assessment, spectrophotometry, and intraoral scanning. Aims and Objectives: This study aims to improve the accuracy of shade selection in prosthodontics. To achieve this, it will compare digital, intraoral, and visual methods, identify factors influencing shade selection, develop educational guidelines for dentists, and minimize color discrepancies between chosen and final shades. Methods: A diverse group of 37 participants with 111 shades of teeth were involved. Three shade selection methods were employed: visual assessment using a shade guide, spectrophotometry with the VITA Easyshade Compact, and intraoral scanning with the Medit i700. The accuracy of each method was determined by comparing the selected shade to the fabricated porcelain restoration. Results: While digital methods (spectrophotometry and intraoral scanning) simplified the shade selection process, visual assessment, especially when performed by experienced dentists, consistently demonstrated higher accuracy. Factors such as lighting conditions and individual variations in color perception influenced the reliability of visual assessment. Discussion: The study emphasizes the importance of a comprehensive approach to shade selection, combining both visual and digital methods. Digital tools offer objective measurements, while visual assessment captures subtle nuances in color and ensures patient satisfaction. Conclusion: The optimal shade selection method depends on the specific clinical situation and the dentist's expertise. By incorporating both visual and digital techniques, dental professionals can enhance the accuracy and reliability of shade selection, ultimately leading to more natural-looking and aesthetically pleasing dental restorations.
- 1 October 2024
- Published by SciVision Publishers LLC in Medicine and Clinical Science
- Vol. 6 (4)
Open AccessA Clinical Comparison Between New and Conventional Methods for Quantification of Intended and Fabricated Dental Porcelain Color
Introduction: The accurate selection of dental porcelain shades is crucial for achieving natural-looking and aesthetically pleasing restorations. This study aimed to compare the effectiveness of various shade selection methods, including visual assessment, spectrophotometry, and intraoral scanning. Aims and Objectives: This study aims to improve the accuracy of shade selection in prosthodontics. To achieve this, it will compare digital, intraoral, and visual methods, identify factors influencing shade selection, develop educational guidelines for dentists, and minimize color discrepancies between chosen and final shades. Methods: A diverse group of 37 participants with 111 shades of teeth were involved. Three shade selection methods were employed: visual assessment using a shade guide, spectrophotometry with the VITA Easyshade Compact, and intraoral scanning with the Medit i700. The accuracy of each method was determined by comparing the selected shade to the fabricated porcelain restoration. Results: While digital methods (spectrophotometry and intraoral scanning) simplified the shade selection process, visual assessment, especially when performed by experienced dentists, consistently demonstrated higher accuracy. Factors such as lighting conditions and individual variations in color perception influenced the reliability of visual assessment. Discussion: The study emphasizes the importance of a comprehensive approach to shade selection, combining both visual and digital methods. Digital tools offer objective measurements, while visual assessment captures subtle nuances in color and ensures patient satisfaction. Conclusion: The optimal shade selection method depends on the specific clinical situation and the dentist's expertise. By incorporating both visual and digital techniques, dental professionals can enhance the accuracy and reliability of shade selection, ultimately leading to more natural-looking and aesthetically pleasing dental restorations.
- Open Access
- 15 November 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
RADIOGRAPHIC EVALUATION OF OVERHANGING RESTORATIONS AMONG YEMENI PATIENTS USING CONE-BEAM COMPUTED TOMOGRAPHY (CBCT)
Background and aims: Overhanging restorations which is extension of restorative material beyond the confines of a cavity preparation may lead to various complications and risks, including increased gingival fluid flow and oral inflammation. The study aim is to use cone-beam computed tomography (CBCT) to radiographically assess the incidence of overhanging restorations in Yemeni patients. Methods: A retrospective comparative study was conducted on 404 randomly selected CBCT images dor ≥ 18 years male and female Yemeni patients referred to private radiology centers in different Yemeni cities (i.e., Sana'a, Ibb, Hodeida, Aden and Hadhramout) during the period from January 2021 to June 2022. The overhang was evaluated regarding arch (upper or lower), side (right or left), tooth location, and tooth type (central incisor (I1), lateral incisor (I2), canine (C), 1st premolar (P1), 2nd premolar (P2), 1st molar (M1), 2nd molar (M2) and 3rd molar (M3). The tooth surface was considered the statistical unit to allow an accurate comparison of periodontal variables for each restored surface. The evaluated surface points of class II restorations were mesial and distal, while those of crown restorations were mesial, distal, buccal, lingual, mesiobuccal, mesiolingual, distobuccal, and distolingual. Results: The prevalence rate of overhang was 59.8% in class II and 51.5% in crown restorations. Class II restoration overhang had no significant association with arch, side, tooth type, and tooth location; however, it had a significant association with tooth and surface point (p<0.05), indicating that it was more significantly observed in the 2nd premolar (67.5%) than the other teeth as well as in the distal surface than the mesial one (73.1% vs. 26.9%, p<0.05 Conclusion: The prevalence of class II and crown restoration overhang is considered high among Yemeni patients. Overhangs observed on class II restorations are more than those observed on crown restorations. Class II restoration overhangs are more commonly observed on the 2nd premolar as well as the distal surface. Peer Review History: Received: 8 August 2023; Revised: 19 September; Accepted: 26 October, Available online: 15 November 2023 Academic Editor: Dr. DANIYAN Oluwatoyin Michael, Obafemi Awolowo University, ILE-IFE, Nigeria, toyinpharm@gmail.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 8.0/10 Reviewers: Dr. Tamer Elhabibi, Suez Canal University, Egypt, tamer_hassan@pharm.suez.edu.eg Dr. Bilge Ahsen KARA, Ankara Gazi Mustafa Kemal Hospital, Turkey, ahsndkyc@gmail.com
- 15 November 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
Open AccessRADIOGRAPHIC EVALUATION OF OVERHANGING RESTORATIONS AMONG YEMENI PATIENTS USING CONE-BEAM COMPUTED TOMOGRAPHY (CBCT)
Background and aims: Overhanging restorations which is extension of restorative material beyond the confines of a cavity preparation may lead to various complications and risks, including increased gingival fluid flow and oral inflammation. The study aim is to use cone-beam computed tomography (CBCT) to radiographically assess the incidence of overhanging restorations in Yemeni patients. Methods: A retrospective comparative study was conducted on 404 randomly selected CBCT images dor ≥ 18 years male and female Yemeni patients referred to private radiology centers in different Yemeni cities (i.e., Sana'a, Ibb, Hodeida, Aden and Hadhramout) during the period from January 2021 to June 2022. The overhang was evaluated regarding arch (upper or lower), side (right or left), tooth location, and tooth type (central incisor (I1), lateral incisor (I2), canine (C), 1st premolar (P1), 2nd premolar (P2), 1st molar (M1), 2nd molar (M2) and 3rd molar (M3). The tooth surface was considered the statistical unit to allow an accurate comparison of periodontal variables for each restored surface. The evaluated surface points of class II restorations were mesial and distal, while those of crown restorations were mesial, distal, buccal, lingual, mesiobuccal, mesiolingual, distobuccal, and distolingual. Results: The prevalence rate of overhang was 59.8% in class II and 51.5% in crown restorations. Class II restoration overhang had no significant association with arch, side, tooth type, and tooth location; however, it had a significant association with tooth and surface point (p<0.05), indicating that it was more significantly observed in the 2nd premolar (67.5%) than the other teeth as well as in the distal surface than the mesial one (73.1% vs. 26.9%, p<0.05 Conclusion: The prevalence of class II and crown restoration overhang is considered high among Yemeni patients. Overhangs observed on class II restorations are more than those observed on crown restorations. Class II restoration overhangs are more commonly observed on the 2nd premolar as well as the distal surface. Peer Review History: Received: 8 August 2023; Revised: 19 September; Accepted: 26 October, Available online: 15 November 2023 Academic Editor: Dr. DANIYAN Oluwatoyin Michael, Obafemi Awolowo University, ILE-IFE, Nigeria, toyinpharm@gmail.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 8.0/10 Reviewers: Dr. Tamer Elhabibi, Suez Canal University, Egypt, tamer_hassan@pharm.suez.edu.eg Dr. Bilge Ahsen KARA, Ankara Gazi Mustafa Kemal Hospital, Turkey, ahsndkyc@gmail.com
- Open Access
- 15 July 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
EFFICACY OF DRACAENA CINNABARI AS TOOTH WHITENING NATURAL PRODUCT: A SPECTROPHOTOMETRIC ANALYSIS
Objective: The aim of this study was to determine the efficacy of a homemade tooth-whitening recipe using Dracaena cinnabari (DC) resin, which is traditionally used for tooth decay treatment and cleaning in Soqatra. The study investigated the antioxidant activity of the resin extracts in methanol as tooth-whitening natural product. Materials and Methods: A total of 40 bovine teeth with initial color B2 were selected and divided into four groups. One group was kept as a negative control, while the other three were stained with Yemeni coffee solution for one week. The first group was treated with 10% carbamide peroxide (CP) home bleaching, the second group was treated with 10% DC gel with rubbing movement (DC Ru), and the third group was treated with 10% DC gel without rubbing (DC) for 6 hours daily for 14 days. Color measurements were taken at different time points using a spectrophotometer device. Results: All experimental gels resulted in greater color change compared to the negative control, with DC Ru showing the greatest ΔE* value (p<.001) compared to the DC group (p<.006) and the CP group (p<.001). The second reading of stabilization of all gels resulted with resembled ΔE* values to the first reading of stabilization. Conclusion: The study suggests that the experimental gels containing phenolic content with strong antioxidant effects may reserve significant clinical potential as active agents for tooth-whitening without using HP/CP. Further studies are needed to measure the effect on surface roughness and color stability. Peer Review History: Received: 9 March 2023; Revised: 23 April; Accepted: 25 June 2023, Available online: 15 July 2023 Academic Editor: Prof. Dr. Gorkem Dulger, Duzce University, Turkey, gorkemdulger@yandex.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 5.5/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Sangeetha Arullappan, Universiti Tunku Abdul Rahman, Malaysia, sangeetha@utar.edu.my Prof. Ali Gamal Ahmed Al-kaf, Sana'a university, Yemen, alialkaf21@gmail.com
- 15 July 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
Open AccessEFFICACY OF DRACAENA CINNABARI AS TOOTH WHITENING NATURAL PRODUCT: A SPECTROPHOTOMETRIC ANALYSIS
Objective: The aim of this study was to determine the efficacy of a homemade tooth-whitening recipe using Dracaena cinnabari (DC) resin, which is traditionally used for tooth decay treatment and cleaning in Soqatra. The study investigated the antioxidant activity of the resin extracts in methanol as tooth-whitening natural product. Materials and Methods: A total of 40 bovine teeth with initial color B2 were selected and divided into four groups. One group was kept as a negative control, while the other three were stained with Yemeni coffee solution for one week. The first group was treated with 10% carbamide peroxide (CP) home bleaching, the second group was treated with 10% DC gel with rubbing movement (DC Ru), and the third group was treated with 10% DC gel without rubbing (DC) for 6 hours daily for 14 days. Color measurements were taken at different time points using a spectrophotometer device. Results: All experimental gels resulted in greater color change compared to the negative control, with DC Ru showing the greatest ΔE* value (p<.001) compared to the DC group (p<.006) and the CP group (p<.001). The second reading of stabilization of all gels resulted with resembled ΔE* values to the first reading of stabilization. Conclusion: The study suggests that the experimental gels containing phenolic content with strong antioxidant effects may reserve significant clinical potential as active agents for tooth-whitening without using HP/CP. Further studies are needed to measure the effect on surface roughness and color stability. Peer Review History: Received: 9 March 2023; Revised: 23 April; Accepted: 25 June 2023, Available online: 15 July 2023 Academic Editor: Prof. Dr. Gorkem Dulger, Duzce University, Turkey, gorkemdulger@yandex.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 5.5/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Sangeetha Arullappan, Universiti Tunku Abdul Rahman, Malaysia, sangeetha@utar.edu.my Prof. Ali Gamal Ahmed Al-kaf, Sana'a university, Yemen, alialkaf21@gmail.com
- Open Access
- 15 January 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
EFFECT OF REMOVABLE DENTURES ON COLONIZATION OF AEROBIC BACTERIA IN THE ORAL CAVITY AND ANTIBIOTIC PATTERN OF THE COMMON ISOLATED BACTERIA
Background and aims: Wearing a removable dental prosthesis causes a change in the micro flora of the mouth. The aim of this research was to verify the composition of aerobic bacterial in the oral cavity of patients with removable dentures and with normal teeth (without dentures), and antibiotics pattern for common isolates. Methods: Bacteriological investigations were performed in 122 individuals (61 removable dentures: 61 normal teeth) attending dental clinics of Faculty of dentistry, Sana’a University, Yemen and private dental clinics. The culturing and antibiotic sensitivity were conducted in the Microbiology Department of the National Center of Public Health Laboratories (NCPHL) Sana'a, Yemen. Tongue dorsa and palate mucosa swabs were collected from normal teeth and denture groups, and as well swabs from mucosal part of denture surfaces in prosthetic patients. Cultivation in microaerophilic (5% CO2) and oxygenic conditions were performed on solid selective and non-selective media in addition to media enriched with 5% blood. Results: Regarding the prosthetic patients, the rate of bacterial isolates from the palate, back, tongue and dental plaque smears was higher potential pathogenic bacteria as S. aureus and Enterobacteriaceae spp in denture wearers, as E. coli (6.6% in dentures vs. 1.6% in the absence of dentures), Klebsiella pneumoniae (11.4% in dentures versus 1.6% in the normal teeth) and Pseudomonas aeruginosa (13.1% versus 0.0% ).While in viridians Streptococcus including Strept .mutans, there was a lower colonization rate in denture patients (18% in palate verses, 73.8% in individuals without dentures). Conclusion: The study demonstrated an elevated rate of bacterial isolates from palate, back, tongue and plaque swabs in denture patients of pathogenic bacteria such as S. aureus, E. coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa; while in Streptococcus viridians including S. mutans, there was a lower colonization rate in denture patients verses a very high rate in individuals without dentures. Peer Review History: Received: 7 November 2022; Revised: 13 December; Accepted: 8 January 2023, Available online: 15 January 2023 Academic Editor: Ahmad Najib, Universitas Muslim Indonesia, Indonesia, ahmad.najib@umi.ac.id Received file: Reviewer's Comments: Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Alfonso Alexander Aguileral, University of Veracruz, Mexico, aalexander_2000@yahoo.com Dr. A.A. Mgbahurike, University of Port Harcourt, Nigeria, amaka_mgbahurike@yahoo.com Similar Articles: ETIOLOGY AND RISK FACTORS OF STOMATITIS AMONG YEMENI DENTURE WEARERS PREVALENCE AND ASSOCIATED FACTORS OF ORAL NON-CANDIDA ALBICANS CANDIDA CARRIAGE IN DENTURE WEARERS IN SANA'A CITY- YEMEN THE EFFECT OF NANOSILVER AND CHLORHEXIDINE MOUTHWASH ON ANAEROBIC PERIODONTAL PATHOGENS COUNTS
- 15 January 2023
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
Open AccessEFFECT OF REMOVABLE DENTURES ON COLONIZATION OF AEROBIC BACTERIA IN THE ORAL CAVITY AND ANTIBIOTIC PATTERN OF THE COMMON ISOLATED BACTERIA
Background and aims: Wearing a removable dental prosthesis causes a change in the micro flora of the mouth. The aim of this research was to verify the composition of aerobic bacterial in the oral cavity of patients with removable dentures and with normal teeth (without dentures), and antibiotics pattern for common isolates. Methods: Bacteriological investigations were performed in 122 individuals (61 removable dentures: 61 normal teeth) attending dental clinics of Faculty of dentistry, Sana’a University, Yemen and private dental clinics. The culturing and antibiotic sensitivity were conducted in the Microbiology Department of the National Center of Public Health Laboratories (NCPHL) Sana'a, Yemen. Tongue dorsa and palate mucosa swabs were collected from normal teeth and denture groups, and as well swabs from mucosal part of denture surfaces in prosthetic patients. Cultivation in microaerophilic (5% CO2) and oxygenic conditions were performed on solid selective and non-selective media in addition to media enriched with 5% blood. Results: Regarding the prosthetic patients, the rate of bacterial isolates from the palate, back, tongue and dental plaque smears was higher potential pathogenic bacteria as S. aureus and Enterobacteriaceae spp in denture wearers, as E. coli (6.6% in dentures vs. 1.6% in the absence of dentures), Klebsiella pneumoniae (11.4% in dentures versus 1.6% in the normal teeth) and Pseudomonas aeruginosa (13.1% versus 0.0% ).While in viridians Streptococcus including Strept .mutans, there was a lower colonization rate in denture patients (18% in palate verses, 73.8% in individuals without dentures). Conclusion: The study demonstrated an elevated rate of bacterial isolates from palate, back, tongue and plaque swabs in denture patients of pathogenic bacteria such as S. aureus, E. coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa; while in Streptococcus viridians including S. mutans, there was a lower colonization rate in denture patients verses a very high rate in individuals without dentures. Peer Review History: Received: 7 November 2022; Revised: 13 December; Accepted: 8 January 2023, Available online: 15 January 2023 Academic Editor: Ahmad Najib, Universitas Muslim Indonesia, Indonesia, ahmad.najib@umi.ac.id Received file: Reviewer's Comments: Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Alfonso Alexander Aguileral, University of Veracruz, Mexico, aalexander_2000@yahoo.com Dr. A.A. Mgbahurike, University of Port Harcourt, Nigeria, amaka_mgbahurike@yahoo.com Similar Articles: ETIOLOGY AND RISK FACTORS OF STOMATITIS AMONG YEMENI DENTURE WEARERS PREVALENCE AND ASSOCIATED FACTORS OF ORAL NON-CANDIDA ALBICANS CANDIDA CARRIAGE IN DENTURE WEARERS IN SANA'A CITY- YEMEN THE EFFECT OF NANOSILVER AND CHLORHEXIDINE MOUTHWASH ON ANAEROBIC PERIODONTAL PATHOGENS COUNTS
- Open Access
- 15 November 2022
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
INTERLEUKIN-1β LEVELS IN THE HUMAN GINGIVAL SULCUS: RATES AND FACTORS AFFECTING ITS LEVELS IN HEALTHY SUBJECTS
Background and objective: Gingival crevicular fluid (GCF) affords a exceptional window for investigation of periodontal condition as the levels of inflammatory mediators, which consequences owing to the increased local destruction of connective tissue structural elements. This study aimed to explore the interleukin 1β (IL-1β)) levels in the human gingival sulcus in healthy normal people; and the effect of host factors as age , gender, type of tooth used in pro-inflammatory biomarkers. Methods: Eighty seven patients, 54 (62.1%) female and 33 (37.9%) male (aged 12–34 years; mean 19.58±4.4 years), participated in this study. Each subject underwent a session on professional oral hygiene and received oral hygiene instructions. Gingival crevicular fluid (GCF) sampling was conducted (baseline). GCF was collected from the Central incisor, the Lateral incisor, the Canine, the First premolar and the second premolar in this study. Results: In total, the mean±SD of central incisor IL-1β was 32.16±4.83 pg/ml, with a mode equal to 28.01 pg/mL, the median was 32.71 pg/mL, and ranged from 20.98 to 41.25 pg/ml with the 75% interquartile range (IQR) equal to 35.94 pg/ml. For males the mean±SD of central incisor IL-1β was 31.6±5.51 pg/ml VS 32.5±4.4 pg/ml of females. For the lateral incisor, canine, first premolar, second premolar: Conclusion: This study provides the upper limit of normal values for interleukin 1β (IL-1β) levels for subjects aged 12–34 years in the GCF. These upper limits of normal values will guide dentists in Yemen when they consider the diagnosis of periodontal disease, as well as its role during orthodontic tooth movement where they play important role in osteocyte activities (e.g, osteoclasts and osteoblasts), and will provide useful baseline data for future studies of interventions against periodontal disease, and teeth movement by orthodontics appliances, in Yemen. Peer Review History: Received: 1 September 2022; Revised: 11 October; Accepted: 6 November, Available online: 15 November 2022 Academic Editor: Dr. Emmanuel O. Olorunsola, Department of Pharmaceutics & Pharmaceutical Technology, University of Uyo, Nigeria, olorunsolaeo@yahoo.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 5.0/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Rima Benatoui,Laboratory of Applied Neuroendocrinology, Department of Biology, Faculty of Science, Badji Mokhtar University Annaba, Algeria. benattouiryma@gmail.com Dr. Gulam Mohammed Husain,, National Research Institute of Unani Medicine for Skin Disorders, Hyderabad, India, gmhusain@gmail.com Similar Articles: THE EFFECT OF NANOSILVER AND CHLORHEXIDINE MOUTHWASH ON ANAEROBIC PERIODONTAL PATHOGENS COUNTS
- 15 November 2022
- Published by Society of Pharmaceutical Tecnocrats in Universal Journal of Pharmaceutical Research
Open AccessINTERLEUKIN-1β LEVELS IN THE HUMAN GINGIVAL SULCUS: RATES AND FACTORS AFFECTING ITS LEVELS IN HEALTHY SUBJECTS
Background and objective: Gingival crevicular fluid (GCF) affords a exceptional window for investigation of periodontal condition as the levels of inflammatory mediators, which consequences owing to the increased local destruction of connective tissue structural elements. This study aimed to explore the interleukin 1β (IL-1β)) levels in the human gingival sulcus in healthy normal people; and the effect of host factors as age , gender, type of tooth used in pro-inflammatory biomarkers. Methods: Eighty seven patients, 54 (62.1%) female and 33 (37.9%) male (aged 12–34 years; mean 19.58±4.4 years), participated in this study. Each subject underwent a session on professional oral hygiene and received oral hygiene instructions. Gingival crevicular fluid (GCF) sampling was conducted (baseline). GCF was collected from the Central incisor, the Lateral incisor, the Canine, the First premolar and the second premolar in this study. Results: In total, the mean±SD of central incisor IL-1β was 32.16±4.83 pg/ml, with a mode equal to 28.01 pg/mL, the median was 32.71 pg/mL, and ranged from 20.98 to 41.25 pg/ml with the 75% interquartile range (IQR) equal to 35.94 pg/ml. For males the mean±SD of central incisor IL-1β was 31.6±5.51 pg/ml VS 32.5±4.4 pg/ml of females. For the lateral incisor, canine, first premolar, second premolar: Conclusion: This study provides the upper limit of normal values for interleukin 1β (IL-1β) levels for subjects aged 12–34 years in the GCF. These upper limits of normal values will guide dentists in Yemen when they consider the diagnosis of periodontal disease, as well as its role during orthodontic tooth movement where they play important role in osteocyte activities (e.g, osteoclasts and osteoblasts), and will provide useful baseline data for future studies of interventions against periodontal disease, and teeth movement by orthodontics appliances, in Yemen. Peer Review History: Received: 1 September 2022; Revised: 11 October; Accepted: 6 November, Available online: 15 November 2022 Academic Editor: Dr. Emmanuel O. Olorunsola, Department of Pharmaceutics & Pharmaceutical Technology, University of Uyo, Nigeria, olorunsolaeo@yahoo.com Received file: Reviewer's Comments: Average Peer review marks at initial stage: 5.0/10 Average Peer review marks at publication stage: 7.0/10 Reviewers: Dr. Rima Benatoui,Laboratory of Applied Neuroendocrinology, Department of Biology, Faculty of Science, Badji Mokhtar University Annaba, Algeria. benattouiryma@gmail.com Dr. Gulam Mohammed Husain,, National Research Institute of Unani Medicine for Skin Disorders, Hyderabad, India, gmhusain@gmail.com Similar Articles: THE EFFECT OF NANOSILVER AND CHLORHEXIDINE MOUTHWASH ON ANAEROBIC PERIODONTAL PATHOGENS COUNTS