XZXiaodong Zhang

Xiaodong Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaodong Zhang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Inverse spiral acoustic black hole with extended tip-mass system for vibration energy harvesting

    by Jinze Xu, Xiaodong Zhang, Huiyong Yu, Yu Chen

    1. The rapid proliferation of Internet of Things networks and smart sensing systems—particularly in demanding environments like wearable electronics, aerospace systems, and industrial condition mon...

  • Open Access

    Broadband low-frequency ventilated acoustic metamaterial using decorated membrane-integrated Helmholtz resonator

    by Jing Nie, Fengbin Lin, Jinhong He, Xiaodong Zhang, Yang Liu, Jianxing Yang, Rui Yang

    Ventilated acoustic metamaterials are critical for balancing noise control and airflow in engineering systems, but traditional designs are plagued by narrow bandwidth and bulky structures when targeting low-frequency noise. Herein, we propose a compact ventilated acoustic metamaterial unit that integrates a Helmholtz resonator (HR) with a decorated membrane resonator (denoted as HRDMR hereinafter). This structure introduces a novel coupling mechanism between a HR and a mass-loaded, tension-insensitive membrane, leveraging the synergistic resonance between cavity air and decorated membrane vibration to achieve broadband low-frequency sound insulation while maintaining unobstructed airflow. Finite element simulations and transmission loss tube experiments demonstrate that a 5-unit cascaded HRDMR array features an ultra-compact size exhibiting sub-wavelength dimensions (λ/16 at 500 Hz) and achieves a sound transmission loss exceeding 10 dB over the frequency range of 489–1058 Hz. Compared to traditional HRs, this design achieves an approximately 20% bandwidth expansion. Furthermore, this design exhibits robust parameter stability, retaining performance across its operating band even when the Young modulus of the membrane varies within 14–20 MPa (a 30% variation). This work provides a high-performance and ultra-compact solution for low-frequency noise insulation in ventilation ducts, vehicle cabins, and other airflow-dependent engineering applications.


  • Open Access

    Digital controlled nonlinear smart metamaterial for broadband elastic wave attenuation

    by Huiyong Yu, Xiaodong Zhang, Rui Yang, Gang Wang

    One challenge for traditional elastic metamaterials involves broadening the low-frequency bandgap width. To this end, this study presents a new design of a bi-nonlinear smart metamaterial (BNSM) consisting of a host beam and periodically bonded piezoelectric patches with soft and hard nonlinear shunting circuits. A nonlinear finite element model is developed accounting for both piezoelectric coupling effects and electrical nonlinear dynamics to predict the attenuation constants and wave transmissions in the proposed smart metamaterial. Experimental tests are conducted to validate the theoretical predictions. Theoretical and experimental results show that the proposed BNSM can achieve excellent vibration attenuation in low-frequency range. By alternating soft and hard nonlinear shunting circuits, a soft or hard nonlinear local resonance bandgap (NLRB) is generated, respectively, where the soft NLRB extends to higher frequencies, the hard NLRB does vice versa, and each NLRB exhibits attenuation characteristic over a wider frequency range compared to the locally resonant (LR) bandgap. When both NLRBs are activated simultaneously, a broad Bi-NLRB bandgap exceeding 200 Hz is formed, which is 1.7 (1.6) times wider than single hard (soft) NLRB, even 3.9 times wider than the LR bandgap. Moreover, within the majority of the frequency range of each NLRB, the equivalent elastic modulus values are negative. This study introduces a method to fabricate smart nonlinear metamaterials and offers promise for wide-frequency vibration control on flexible structures.


  • Open Access

    Performance comparison between semi-active suspension and passive suspension based on ceiling algorithm

    by Dongqi He, Pingyang Yang, Xiaodong Zhang

    This research explores continuous damping for vehicle suspension systems. We devise two models of suspension systems: one being a traditional passive suspension system and the other a semi-active variant. The semi-active suspension system is highlighted for its capability to enhance vibration reduction via adjustable damping, offering cost-effective and practical benefits over fully active counterparts. To further augment the performance of the semi-active suspension, we introduce a ceiling algorithm, which is instrumental in diminishing the vibrations affecting the rear sprung mass, thereby enhancing suspension system performance overall. Subsequently, we conduct a comparative analysis of the sprung acceleration responses of both types of suspension systems under various excitations, including step inputs, sine waves, random waves, and B-class road profiles. Our results demonstrate that the semi-active suspension system, when equipped with the enhanced ceiling control algorithm, surpasses both the traditional passive and semi-active cases utilizing the standard ceiling control algorithm. Specifically, the enhanced algorithm-equipped semi-active suspension exhibits lower root-mean-square acceleration and peak acceleration values, affirming its superior damping performance.

  • Active fault tolerant control strategy for steering actuator based on MM-DPCC

    by Xiaodong Zhang, Jie Chen, Baoxing Lin, Zhiwei Liu, Gong Gang, Liang Su, Feng Zhang, Yong Zhang

    The Steer-by-Wire (SBW) system enhances steering control in automated driving technology. The adoption of dual three-phase permanent magnet synchronous motor (PMSM) in SBW system denotes an emerging trend, susceptible to model parameter mismatch under complex and variable operating conditions, impacting motor control. To address this, a deadbeat predictive current control algorithm based on multi-model adaptive law (MM-DPCC) has been proposed. This algorithm enhances motor control performance under parameter mismatch. In addition, a Fault Diagnosis and Fault Tolerant Control (FDFTC) strategy builds upon this, validated via MATLAB/Simulink simulations. The simulation results with different parameter mismatches demonstrated the robustness of MM-DPCC. Compared to traditional DPCC, the deviation of the average current i q of MM-DPCC decreases by 10.72% at 50% reduction of the magnetic flux. The amplitude of i q ripple current of MM-DPCC reduces by 22.87% at 50% increment in inductance. These results illustrate the promising prospects of the proposed MM-DPCC and FDFTC strategies for the application in fault-tolerant control of SBW systems and automatic driving.


  • Open Access

    Digitally Controlled Piezoelectric Metamaterial for Low-Frequency and High-Efficiency Sound Absorption

    by Xiaodong Zhang, Jing Nie, Jinhong He, Fengbin Lin, Yang Liu

    This study proposes a membrane-type metamaterial with digitally controlled piezoelectric actuation for low-frequency sound absorption applications. The hybrid structure integrates an aluminum membrane functionally bonded with programmable piezoelectric patches (PZTs) and a sealed air cavity. Two innovative control strategies—Resistance Enhancement and Resonance Enhancement—dynamically adjust circuit impedance to maximize electromechanical energy conversion efficiency, thereby optimizing absorption at targeted frequencies. These strategies are implemented via a real-time digital feedback system. A coupled piezoelectric-structural-acoustic model is established to characterize the system’s transfer function, with validation through both finite element simulations and impedance tube experiments. Numerical and experimental results demonstrate nearly complete absorption around the resonant frequency, and the bandwidth can be further broadened through multi-resonance superposition. Theoretical analysis confirms that the active control strategies simultaneously modulate the acoustic impedance components (resistance and reactance), thereby optimizing electromechanical energy conversion efficiency. This work establishes a novel active-control methodology for low-frequency and high-efficiency noise mitigation.


  • Open Access

    Deep-Subwavelength Composite Metamaterial Unit for Concurrent Ventilation and Broadband Acoustic Insulation

    by Xiaodong Zhang, Jinhong He, Jing Nie, Yang Liu, Huiyong Yu, Qi Chen, Jianxing Yang

    Balancing ventilation and broadband sound insulation remains a significant challenge in noise control engineering, particularly when simultaneous airflow and broadband noise reduction are required. Conventional porous absorbers and membrane-type metamaterials remain fundamentally constrained by ventilation-blocking configurations or narrow operational bandwidths. This study presents a ventilated composite metamaterial unit (VCMU) co-integrating optimized labyrinth channels and the Helmholtz resonators within a single-plane architecture. This design achieves exceptional ventilation efficiency through a central flow channel while maintaining sub-λ/30 thickness (λ/31 at 860 Hz). Coupled transfer matrix modeling and finite-element simulations reveal that Fano–Helmholtz resonance mechanisms synergistically generate broadband transmission loss (STL) spanning 860–1634 Hz, with six STL peaks in the 860 and 1634 Hz bands (mean 18.4 dB). Experimental validation via impedance tube testing confirmed excellent agreement with theoretical and simulation results. The geometric scalability allows customizable acoustic bandgaps through parametric control. This work provides a promising solution for integrated ventilation and noise reduction, with potential applications in building ventilation systems, industrial pipelines, and other noise-sensitive environments.


  • Active Fault Tolerance for Sensor Failures in Steer-by-Wire Systems via Multi-Model Adaptive Kalman Filter

    by Xiaodong Zhang, Jie Chen, Liang Su, Gang Gong, Feng Zhang

    The steer-by-wire (SBW) system is susceptible to parameter perturbations due to external disturbances under complex and variable conditions, leading to unstable performance. To address this challenge, this paper proposes a multi-model adaptive Kalman filter (MMAKF), which can efficiently attenuate the impact of the cornering stiffness variation and significantly enhances the precision of the front wheel angles estimation. On this basis, a fault diagnosis and fault-tolerant control (FDFTC) strategy is also proposed to mitigate the impact of faults. Joint simulations using Carsim and MATLAB/Simulink demonstrate the effectiveness of the proposed FDFTC strategy in detecting and reconstructing various sensor signal faults. Furthermore, the simulations conducted with varying road adhesion coefficients and vehicle speeds prove that the proposed MMAKF offers remarkable robustness and accurate estimation of front wheel angles under challenging conditions. Compared to the traditional Kalman filter (KF), it reduces maximum error by 22.17% and maximum root mean square error (RMSE) by 44.69%. Meanwhile, the validity of the proposed MMAKF algorithm and FDFTC strategy is demonstrated by the HIL platform. These results indicate promising prospects for the proposed MMAKF and FDFTC strategy in SBW fault-tolerant control applications and self-driving technology development.