YWYang Wang

Yang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Progressive failure mechanism and damage characterization of brittle single pre-existing hole coal specimens under uniaxial loading

    by Yang Wang, Dezhong Kong, Yu Guo, Yanjiao Li, Derui Kou, Guiyi Wu, Yujun Zuo

    Large-diameter relief drilling is the most direct and effective technique for preventing and controlling dynamic coal and rock disasters such as rockburst. To investigate the destructive effects of a pre-existing hole on brittle coal masses, this study employs experiments and numerical simulations to examine both surface strain and crack monitoring, as well as internal stress and damage evolution in single pre-existing hole coal specimens. It reveals the progressive failure mechanism of such coal specimens and introduces fractal geometry theory to characterize the quantitative evolution of damage. The results indicate that the presence of an internal hole significantly reduces the strength of the coal specimen. The primary cause of failure in the single pre-existing hole coal specimens is structural defects induced by the large-diameter hole, with the failure mode characterized by a combination of tensile and shear high-strain concentration zones forming an “X”-shaped fracture surface. Axial compressive-shear stresses drive the compression and shearing of internal coal particles, while radial stresses promote the separation of these particles, forming an “X”-shaped tensile-shear failure surface. Tensile damage plays a primary role in crack initiation during the early loading stage, while in the later stages, increased compressive-shear damage becomes the primary mechanism causing tensile-shear failure of the specimen. Fractal dimension was used to quantitatively characterize the development and spatial complexity of the fracture network in the single-hole coal specimen. The fractal dimension increases rapidly near the hole in the specimen when combined tensile-shear cracks form, marking a critical stage in crack propagation.

  • Open Access

    Optimization of drilling parameters for coal seam gas extraction considering fluid–solid coupling and field application

    by Wang Yang, Xu Mengtang, Kong Dezhong, Shang Yuqi, Li Fei

    Affect gas extraction efficiency to find out the optimum well location parameters, based on the gray correlation analysis of borehole diameter, borehole spacing, and extraction pressure three boreholes parameters that influence efficiency of gas extraction from the design of orthogonal experiment, using COMSOL simulate the effective radius of extraction under different experiments, and the effective radius of extraction for optimizing index quantitative gas extraction efficiency. The results showed that: factors affecting the gas extraction efficiency of the correlation between high and low aperture drilling, borehole spacing, and extraction from extraction negative pressure, it is concluded that the influence parameters of optimal layout parameter values, respectively, borehole diameter 8 cm and 3 m borehole spacing, extraction pressure 50 kPa, combined with the numerical simulation analysis using the optimal layout of gas drilling extraction from about 30 days. The decrease in gas pressure is about 45%, which basically meets the extraction standard, and the decreasing trend of gas pressure is obviously slowed down when the extraction time is longer than 30 days. The engineering experiment is carried out in the 9306 transport lane of a mine in Guizhou Province, and the results are basically consistent with the simulation results, which verify the rationality of the gray correlation analysis method to optimize the drilling parameters, and provide a theoretical basis for the optimization of drilling parameters.


  • Open Access

    Study on destabilization failure characteristics and energy evolution law of drilling holes

    by Yang Wang, Mengtang Xu, Dezhong Kong, Guiyi Wu, Yuqi Shang, Long Chen, Yuhao Liu

    Borehole destabilization damage is an important factors affecting gas extraction efficiency. To derive the fracture development law, strain, and energy evolution characteristics of different borehole diameters, uniaxial compression experiments were conducted on prefabricated rock specimens with different borehole diameters. The results showed that the elastic energy and dissipation energy of the specimens with different pore diameters changed with the compression process, and the energy distribution inside the specimens. The results show that as the pore size of the specimen increases, the strain area damaged by tensile fracture gradually decreases and the strain area damaged by shear fracture gradually increases, and the damage of the dominant specimen gradually evolves from tensile fracture as the dominant factor to tensile fracture and shear fracture together as the dominant factor and finally to shear fracture as the dominant factor. For the whole compression process of pore size rock specimens, the total energy curve shows a nonlinear growth trend, and the elastic energy curve shows a nonlinear growth trend before the specimen damage and a cliff‐type decrease after the specimen damage. From the perspective of energy distribution, the elastic energy storage limit of the specimen decreases with the increase of the specimen pore size, the energy distribution law inside the rock specimen with pores changes, and the total energy absorbed from the outside gradually changes to the dissipated energy, resulting in an increasing proportion of dissipated energy, indicating that the larger the pore size, the larger the plastic deformation, and the more obvious ductile damage characteristics of the specimen with pores will be shown. The research analyzes the causes of destabilization of rock samples with different hole diameters and provides some theoretical guidance for the study of gas extraction drilling stability.


  • Open Access

    Research on Influencing Factors of Effective Gas Extraction Radius in Coal Mine Based on Multiple Linear Regression

    by Yuqi Shang, Guiyi Wu, Dezhong Kong, Yang Wang, Fei Li

    In order to analyze the influence degree of different factors on gas extraction radius, on the basis of coal seam gas flow theory and elastic mechanics, considering the influence of coal seepage rate change on gas flow, the COMSOL Multiphysics numerical simulation software is secondarily developed by using the stress-seepage coupling mathematical model of coal and rock containing gas. Taking coal seam No.2 of Juji Coal Mine as an example, the effective extraction radius under different extraction negative pressure, extraction borehole diameter, extraction time, and initial permeability of coal seam are simulated, respectively. Then, the orthogonal test method is used to design different calculation schemes, and the effective extraction radius is used as the judgment index. The simulation software is used to calculate the effective extraction radius corresponding to different influencing factors. SPSS statistical software is used to analyze the parameters. The multivariate linear regression equation of the influencing factors of the effective extraction radius is obtained, and the multivariate linear regression model is established. The results show that the negative pressure of extraction has little effect on the effective extraction radius; the effective extraction radius gradually expands with the increase of extraction time and extraction aperture, but it has certain timeliness. The initial permeability of the coal seam has a great influence on the effective extraction radius. The influence degree of different influencing factors from large to small is the initial permeability of coal seam, extraction time, borehole diameter, and extraction negative pressure. Therefore, the key to improving the effectiveness of gas extraction is to increase the initial permeability of the coal seam before preextraction, ensure sufficient extraction time, appropriately increase the borehole diameter, and improve the negative pressure of extraction. Finally, the gas flow rate is used for a field test, and the measured results are basically consistent with the simulation results, which proves the correctness of the mathematical model of gas-containing coal and the feasibility of using numerical simulation methods to study the effective extraction radius of coal seams.