Jitendra Kumar
Research Subjects
Jitendra Kumar has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Neelam Patel
NITI Aayog, New Delhi-110 001, India
2 shared publications- Alka Rani
Division of Agricultural Physics, ICAR-Indian Agricultural Research Institute, New Delhi, India
1 shared publication - Anamika Yadav
Department of Agricultural Engineering, Triguna Sen School of Technology, Assam University, Silchar, Assam, India
1 shared publication Arti Kumari
ICAR-IARI
1 shared publicationAwani Kumar Singh
ICAR-IARI, New Delhi-110 012, India
1 shared publicationFlorence A. Panme
Triguna Sen School of Technology, Assam University Silchar
1 shared publication
Latest Publications
- Open Access
- 19 November 2024
- Published by Indian Council of Agricultural Research, Directorate of Knowledge Management in Agriculture in Journal of Soil Salinity and Water Quality
- Vol. 16 (2) , 307-316
Development of Sensor and Decision Support System (DSS)-based Automated Irrigation System for Enhancing Water Productivity of Tomato Crop
In India, given the rising trend of population growth, climate change and the need to increase agricultural production with efficient utilization of water, It is crucial to execute precise water management strategies in the farmland. In this study, efforts were made towards development of an automated system for irrigation scheduling on real-time basis considering the soil moisture conditions and crop parameters, and evaluation of performance under different irrigation methods in tomato crop. The soil moisture sensor was integrated with decision support system (DSS) and microcontroller using internet and global system for mobile communication (GSM) module for automated irrigation. The developed sensor was compared with Frequency Domain Reflectometer (FDR), tensiometer, and watermark sensor and was calibrated using the gravimetric method. The crop and irrigation water productivity of tomato crop ranged from 5.2–12.6 kg m-3 for control and automated systems, and 7.7–18.7 kg m-3 for the latter under different methods of irrigation. By using an automated drip irrigation system instead of a manually operated check basin irrigation system, cultivators of tomatoes were able to save 39.61% of the water. In terms of economics analysis, highest benefit cost ratio were obtained under manually operated drip irrigation (2.61) followed by automated drip irrigation system (2.50) in tomato crop.
- 19 November 2024
- Published by Indian Council of Agricultural Research, Directorate of Knowledge Management in Agriculture in Journal of Soil Salinity and Water Quality
- Vol. 16 (2) , 307-316
Open AccessDevelopment of Sensor and Decision Support System (DSS)-based Automated Irrigation System for Enhancing Water Productivity of Tomato Crop
In India, given the rising trend of population growth, climate change and the need to increase agricultural production with efficient utilization of water, It is crucial to execute precise water management strategies in the farmland. In this study, efforts were made towards development of an automated system for irrigation scheduling on real-time basis considering the soil moisture conditions and crop parameters, and evaluation of performance under different irrigation methods in tomato crop. The soil moisture sensor was integrated with decision support system (DSS) and microcontroller using internet and global system for mobile communication (GSM) module for automated irrigation. The developed sensor was compared with Frequency Domain Reflectometer (FDR), tensiometer, and watermark sensor and was calibrated using the gravimetric method. The crop and irrigation water productivity of tomato crop ranged from 5.2–12.6 kg m-3 for control and automated systems, and 7.7–18.7 kg m-3 for the latter under different methods of irrigation. By using an automated drip irrigation system instead of a manually operated check basin irrigation system, cultivators of tomatoes were able to save 39.61% of the water. In terms of economics analysis, highest benefit cost ratio were obtained under manually operated drip irrigation (2.61) followed by automated drip irrigation system (2.50) in tomato crop.
- 8 September 2023
- Published by Springer Nature
- p. 37-57
Applications of AI and IoT Technology in Protected Cultivation for Enhancing Agricultural Productivity: A Concise Review
- 8 September 2023
- Published by Springer Nature
- p. 37-57
Applications of AI and IoT Technology in Protected Cultivation for Enhancing Agricultural Productivity: A Concise Review
- 18 February 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (5) , 1-16
Identification of salt-affected soils using remote sensing data through random forest technique: a case study from India
- 18 February 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (5) , 1-16
Identification of salt-affected soils using remote sensing data through random forest technique: a case study from India
- 1 January 2022
- Published by Diva Enterprises Private Limited in Journal of Soil and Water Conservation
- Vol. 21 (2) , 176-183
Morphometric evaluation of Upper Ramganga basin using geospatial techniques
Watershed is an important ecosystem in which all natural resources i.e. soil, water and vegetation coexists. The interrelationship between terrain, geomorphology, land use and morphometric parameters are important to understand hydrological behaviour at the basin level. In the present paper, an attempt has been made to study the morphometric analysis of a watershed of upper ramganga basin in uttarakhand India using GIS. For the study, ASTER DEM (Digital Elevation Model) of 30 m spatial resolution and IRS-1C LISS 3 files and ArcSWAT (Soil and Water Assessment Tool) were used in delineate basin boundary and evaluate of linear, areal, and relief aspect of morphometric parameters. The stream order of selected basin range from first to fourth. The range value of drainage density and bifurcation ratio varies from 0.009 to 0.69 km−1 and 1.1 to 2.4, respectively. The mean elongation ratio of basin was found to be 0.65 indicating that the basin is elongated in shape with gentle slope and long flow path. The hypsometric analysis of upper ramganga basin indicated that the basin was in equilibrium stage. The findings of study will be most useful in modelling of watershed management and developing functional relationship between geomorphologic parameters and hydrological response.
- 1 January 2022
- Published by Diva Enterprises Private Limited in Journal of Soil and Water Conservation
- Vol. 21 (2) , 176-183
Morphometric evaluation of Upper Ramganga basin using geospatial techniques
Watershed is an important ecosystem in which all natural resources i.e. soil, water and vegetation coexists. The interrelationship between terrain, geomorphology, land use and morphometric parameters are important to understand hydrological behaviour at the basin level. In the present paper, an attempt has been made to study the morphometric analysis of a watershed of upper ramganga basin in uttarakhand India using GIS. For the study, ASTER DEM (Digital Elevation Model) of 30 m spatial resolution and IRS-1C LISS 3 files and ArcSWAT (Soil and Water Assessment Tool) were used in delineate basin boundary and evaluate of linear, areal, and relief aspect of morphometric parameters. The stream order of selected basin range from first to fourth. The range value of drainage density and bifurcation ratio varies from 0.009 to 0.69 km−1 and 1.1 to 2.4, respectively. The mean elongation ratio of basin was found to be 0.65 indicating that the basin is elongated in shape with gentle slope and long flow path. The hypsometric analysis of upper ramganga basin indicated that the basin was in equilibrium stage. The findings of study will be most useful in modelling of watershed management and developing functional relationship between geomorphologic parameters and hydrological response.
- Open Access
- 19 May 2021
- Published by IntechOpen
Climatic Variation and Its Impacts on Yield and Water Requirement of Crops in Indian Central Himalaya
Climate is most important factor affecting agriculture, and issues related to climate and its implications have attracted attention of policy makers globally. The farm sector, particularly marginal ecosystems in mountains are vulnerable because of unpredictable variation and severe sink limitations. Efforts to impart resilience to farm and its allied sector are an urgent need. The climatic parameters play very important role to determine type of crops, cattle rearing and the life style adopted by the people. Moreover, weather has a significant impact on crop growth and development. Weather plays a vital role and affects the production and productivity of the crops. According to an estimate, weather contributes 67% variation in productivity and rest of the factors (soil, nutrient and management practices etc.) accounts for 33%. Therefore, there is a need of in-depth analysis of each meteorological parameters and identification of their trend over the years in order to identify and adapt suitable agriculture practices, better adaptable crops, varieties and their duration, time of field preparation, sowing time and irrigation as per the climatic conditions of the region. This will lead farming community to plan strategies of agriculture operation to obtain optimum yield. The climatic data from the meteorological observatory of ICAR-VPKAS, Hawalbagh located at mid hill condition (1250 m amsl) were analyzed for different periods (annual, seasonal, monthly, weekly). It was revealed that rainfall is decreasing over the years but significant (P < 0.05) decrease was recorded at mid hills. The maximum temperature is increasing significantly (P < 0.05) during post-monsoon and winter season however decreasing in monsoon season whereas minimum temperature is decreasing round the year. These changes in rainfall and temperatures are affecting production and productivity of the crops, as hills are largely rainfed. In terms of crop water demand, there is no need to apply irrigation during the rainy season except the transplanted rice. However, during the winter season as there is more than 60% of water deficit to irrigate the crops. The proper understanding of climate is necessary to bring sustainability in hill agriculture by adjusting crop sowing window and other operations as per suitability of the climate.
- 19 May 2021
- Published by IntechOpen
Open AccessClimatic Variation and Its Impacts on Yield and Water Requirement of Crops in Indian Central Himalaya
Climate is most important factor affecting agriculture, and issues related to climate and its implications have attracted attention of policy makers globally. The farm sector, particularly marginal ecosystems in mountains are vulnerable because of unpredictable variation and severe sink limitations. Efforts to impart resilience to farm and its allied sector are an urgent need. The climatic parameters play very important role to determine type of crops, cattle rearing and the life style adopted by the people. Moreover, weather has a significant impact on crop growth and development. Weather plays a vital role and affects the production and productivity of the crops. According to an estimate, weather contributes 67% variation in productivity and rest of the factors (soil, nutrient and management practices etc.) accounts for 33%. Therefore, there is a need of in-depth analysis of each meteorological parameters and identification of their trend over the years in order to identify and adapt suitable agriculture practices, better adaptable crops, varieties and their duration, time of field preparation, sowing time and irrigation as per the climatic conditions of the region. This will lead farming community to plan strategies of agriculture operation to obtain optimum yield. The climatic data from the meteorological observatory of ICAR-VPKAS, Hawalbagh located at mid hill condition (1250 m amsl) were analyzed for different periods (annual, seasonal, monthly, weekly). It was revealed that rainfall is decreasing over the years but significant (P < 0.05) decrease was recorded at mid hills. The maximum temperature is increasing significantly (P < 0.05) during post-monsoon and winter season however decreasing in monsoon season whereas minimum temperature is decreasing round the year. These changes in rainfall and temperatures are affecting production and productivity of the crops, as hills are largely rainfed. In terms of crop water demand, there is no need to apply irrigation during the rainy season except the transplanted rice. However, during the winter season as there is more than 60% of water deficit to irrigate the crops. The proper understanding of climate is necessary to bring sustainability in hill agriculture by adjusting crop sowing window and other operations as per suitability of the climate.
- 1 January 2020
- Published by Diva Enterprises Private Limited in Journal of Soil and Water Conservation
- Vol. 19 (2) , 182-191
Performance evaluation and calibration of soil moisture sensors for scheduling of irrigation in brinjal crop (Solanum melongena L. var. Pusa Shyamla)
This study evaluated the performance of soil moisture sensors i.e. tensiometer, watermark and frequency domain reflectometry (FDR) under field conditions during growing season of brinjal crop. On comparing performance of different sensors (tensiometer, watermark and FDR) had a coefficient of determination (R2) range of 0.68-0.86, 0.68-0.83 and 0.79-0.85, respectively against gravimetric methods at different soil profile layers of 20 cm, 30 cm, 45 cm and 60 cm. Statistically, the performance of tensiometer was found best on comparing with watermark and FDR at 20 cm and 30 cm depth, respectively. The tensiometer had the minimum RRMSE and Md values of 10.09% and - 0.82, respectively with high R2 value of 0.86 at 30 cm soil depth. Watermark and FDR performance at 60 cm depth was found appreciable with mean difference of 0.19 and 1.35, RRMSE value 12.87, 12.52 and R2 value 0.83, 0.86,respectively. The average performance of frequency domain reflectometry and tensiometer had greater coefficient of determination (R2) than watermark sensor at different depths by comparing their readings with that obtained by gravimetric method in brinjal crop. The watermark showed a consistent and increasingly drier estimate of water content compared to tensiometer.
- 1 January 2020
- Published by Diva Enterprises Private Limited in Journal of Soil and Water Conservation
- Vol. 19 (2) , 182-191
Performance evaluation and calibration of soil moisture sensors for scheduling of irrigation in brinjal crop (Solanum melongena L. var. Pusa Shyamla)
This study evaluated the performance of soil moisture sensors i.e. tensiometer, watermark and frequency domain reflectometry (FDR) under field conditions during growing season of brinjal crop. On comparing performance of different sensors (tensiometer, watermark and FDR) had a coefficient of determination (R2) range of 0.68-0.86, 0.68-0.83 and 0.79-0.85, respectively against gravimetric methods at different soil profile layers of 20 cm, 30 cm, 45 cm and 60 cm. Statistically, the performance of tensiometer was found best on comparing with watermark and FDR at 20 cm and 30 cm depth, respectively. The tensiometer had the minimum RRMSE and Md values of 10.09% and - 0.82, respectively with high R2 value of 0.86 at 30 cm soil depth. Watermark and FDR performance at 60 cm depth was found appreciable with mean difference of 0.19 and 1.35, RRMSE value 12.87, 12.52 and R2 value 0.83, 0.86,respectively. The average performance of frequency domain reflectometry and tensiometer had greater coefficient of determination (R2) than watermark sensor at different depths by comparing their readings with that obtained by gravimetric method in brinjal crop. The watermark showed a consistent and increasingly drier estimate of water content compared to tensiometer.