Dong Han Seo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dong Han Seo has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
So Young Lee
Institute of Energy Materials and Devices Korea Institute of Energy Technology (KENTECH) Naju‐si Jeollanam‐do Republic of Korea
10 shared publicationsHyungmin Park
Korea Conformity Laboratories Gwangju‐Jeonnam Center Yeosu Republic of Korea
6 shared publicationsSeonwoo Choi
Institute of Energy Materials & Devices, Korea Institute of Energy Technology (KENTECH), Naju-si, Jeollanam-do, Republic of Korea
5 shared publicationsSun-Woo Kim
Institute of Energy Materials & Devices, Korea Institute of Energy Technology (KENTECH), Naju-si, Jeollanam-do, Republic of Korea
4 shared publicationsSun‐Woo Kim
Institute of Energy Materials & Devices Korea Institute of Energy Technology (KENTECH) Naju‐si Jeollanam‐do Republic of Korea
4 shared publicationsTaeyong Lee
Institute of Energy Materials & Devices, Korea Institute of Energy Technology (KENTECH), Naju-si, Jeollanam-do, Republic of Korea
4 shared publications
Latest Publications
- Open Access
Plasma‐Enabled Simultaneous Synthesis and Nano‐Anchoring of TiO 2− x Nanolayers on Mesoporous Bio‐Silica for Effective Photodegradation of Tetramethylammonium Hydroxide
Organic pollutants from semiconductor manufacturing pose significant threats to aquatic ecosystems and remain challenging to treat. To address these issues, mesoporous bio‐silica (diatomite) was employed as a platform material to accommodate titanium dioxide nanoparticles with oxygen vacancies (OVs) (TiO 2− x ) and hydroxyl groups, which were synthesized and nano‐anchored via a rapid, low‐temperature (2− x nanolayer within the mesopores of bio‐silica. The resultant TiO 2− x nanolayer/bio‐silica composite (DE 700), with a low bandgap (2.68 eV) and a mixed anatase–rutile composition, achieved exceptional photocatalytic performance under a 300 W commercial solar lamp, degrading 20 ppm of tetramethylammonium hydroxide (TMAH), a highly toxic semiconductor wastewater pollutant, using a catalyst loading of 0.5 g/L. The catalyst achieved 62% TMAH conversion into ammonium ions with trace amine intermediates and complete TMAH degradation after 12 h of solar lamp exposure. It degraded 20 ppm methylene blue (MB) by 90% in 30 min and 100% in 120 min, significantly outperforming commercial TiO 2 ‐P25, which achieved 29.22% TMAH removal and 14.11% ammonium ion conversion under same condition. Electrochemical impedance spectroscopy (EIS) and time‐resolved photoluminescence (TRPL) analyses indicated improved interfacial charge‐transfer kinetics and suppressed charge‐carrier recombination in DE 700 compared to TiO 2 ‐P25. Additionally, the catalyst maintained 91%–97% degradation efficiency over four reused cycles, and a preliminary plant‐based sprouting assay indicated no observable phytotoxicity of the treated effluent, highlighting its potential as a cost‐effective solution for treating challenging feedwater streams.
Open AccessPlasma‐Enabled Simultaneous Synthesis and Nano‐Anchoring of TiO 2− x Nanolayers on Mesoporous Bio‐Silica for Effective Photodegradation of Tetramethylammonium Hydroxide
Organic pollutants from semiconductor manufacturing pose significant threats to aquatic ecosystems and remain challenging to treat. To address these issues, mesoporous bio‐silica (diatomite) was employed as a platform material to accommodate titanium dioxide nanoparticles with oxygen vacancies (OVs) (TiO 2− x ) and hydroxyl groups, which were synthesized and nano‐anchored via a rapid, low‐temperature (2− x nanolayer within the mesopores of bio‐silica. The resultant TiO 2− x nanolayer/bio‐silica composite (DE 700), with a low bandgap (2.68 eV) and a mixed anatase–rutile composition, achieved exceptional photocatalytic performance under a 300 W commercial solar lamp, degrading 20 ppm of tetramethylammonium hydroxide (TMAH), a highly toxic semiconductor wastewater pollutant, using a catalyst loading of 0.5 g/L. The catalyst achieved 62% TMAH conversion into ammonium ions with trace amine intermediates and complete TMAH degradation after 12 h of solar lamp exposure. It degraded 20 ppm methylene blue (MB) by 90% in 30 min and 100% in 120 min, significantly outperforming commercial TiO 2 ‐P25, which achieved 29.22% TMAH removal and 14.11% ammonium ion conversion under same condition. Electrochemical impedance spectroscopy (EIS) and time‐resolved photoluminescence (TRPL) analyses indicated improved interfacial charge‐transfer kinetics and suppressed charge‐carrier recombination in DE 700 compared to TiO 2 ‐P25. Additionally, the catalyst maintained 91%–97% degradation efficiency over four reused cycles, and a preliminary plant‐based sprouting assay indicated no observable phytotoxicity of the treated effluent, highlighting its potential as a cost‐effective solution for treating challenging feedwater streams.
- 11 June 2026
- Published by Wiley in Small Methods
- Vol. 10 (13) , e70774
Plasma Enabled Hierarchical Surface Reconstruction of Nanoengineered, Dendrite‐Free Zn Metal for Durable Aqueous Zinc Ion Battery
Aqueous Zinc‐ion batteries (AZIBs) are receiving significant attention due to their high volumetric energy density, increased safety and lower cost compared to alternative energy storage systems. The use of Zinc metal as an anode, however, creates stability challenges due to dendrite formation as well as side reactions from surface imperfections. In this work, hierarchical surface modification to Zinc metal anodes via a low energy, scalable Argon plasma is introduced. This approach smooths surfaces and heals defects on a micron scale while simultaneously Zinc nanoisland seed layers are formed. Plasma induced surface reconstruction also leads to a significant reduction in surface impurities. Moreover, Zinc nanoisland seed layers are found to be beneficial for suppressing the dendrite formation through surface homogenization. Unlike unstable and short‐lived bare Zn metal anodes, plasma treated anodes exhibits enhanced rate performances and superior stability even after long‐term cycling demonstrated by symmetric cell test and full cell tests with both MnO 2 and V 2 O 5 cathode tested under different electrolytes. These results demonstrate that plasma enabled surface modification of Zn metal anode is an effective strategy for improving the overall AZIB performance, especially the cycling stability in a facile manner, resolving one of the key challenges to commercializing AZIBs.
- 11 June 2026
- Published by Wiley in Small Methods
- Vol. 10 (13) , e70774
Plasma Enabled Hierarchical Surface Reconstruction of Nanoengineered, Dendrite‐Free Zn Metal for Durable Aqueous Zinc Ion Battery
Aqueous Zinc‐ion batteries (AZIBs) are receiving significant attention due to their high volumetric energy density, increased safety and lower cost compared to alternative energy storage systems. The use of Zinc metal as an anode, however, creates stability challenges due to dendrite formation as well as side reactions from surface imperfections. In this work, hierarchical surface modification to Zinc metal anodes via a low energy, scalable Argon plasma is introduced. This approach smooths surfaces and heals defects on a micron scale while simultaneously Zinc nanoisland seed layers are formed. Plasma induced surface reconstruction also leads to a significant reduction in surface impurities. Moreover, Zinc nanoisland seed layers are found to be beneficial for suppressing the dendrite formation through surface homogenization. Unlike unstable and short‐lived bare Zn metal anodes, plasma treated anodes exhibits enhanced rate performances and superior stability even after long‐term cycling demonstrated by symmetric cell test and full cell tests with both MnO 2 and V 2 O 5 cathode tested under different electrolytes. These results demonstrate that plasma enabled surface modification of Zn metal anode is an effective strategy for improving the overall AZIB performance, especially the cycling stability in a facile manner, resolving one of the key challenges to commercializing AZIBs.
- 22 April 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 93
Electrochemical synthesis of amorphous nickel phosphide for high performing hydrogen evolution reaction electrocatalyst
- 22 April 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 93
Electrochemical synthesis of amorphous nickel phosphide for high performing hydrogen evolution reaction electrocatalyst
- Open Access
- 4 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
High-performance caffeic acid-based superhydrophilic membranes for efficient removal of microplastics-oil co-contaminants
Microplastic-oil co-contaminants have raised high environmental concerns due to their persistence and synergistic toxicity. However, conventional separation membranes, typically designed for single-pollutant removal, are ineffective against such complex systems. Moreover, the strong interfacial interactions between microplastics and oil promote aggregate formation, leading to severe membrane fouling and compromised separation performance. Herein, we present a robust, antifouling, and superhydrophilic membrane fabricated via sodium periodate-assisted co-deposition of caffeic acid and ε-polylysine for simultaneously removing both oil droplets and microplastic particles from contaminated water. The resulting caffeic acid/ε-polylysine composite superhydrophilic membrane achieves an impressive separation efficacy for various oil-in-water emulsions and polystyrene microplastics of different sizes. Notably, it exhibits superior separation performance for challenging microplastic-oil co-contaminants, with rejection of 99.89% for oil and 96.99% for 100-nm polystyrene microplastics over 300-min continuous filtration. It also sustains a high flux recovery, reflecting robust antifouling properties and thus highlighting a great potential for practical application in complex wastewater treatment. Additionally, the membrane shows a remarkable antibacterial activity even after 30 days of immersion. This study demonstrates a scalable and sustainable strategy for fabricating high-performance polyphenol-based antifouling membranes, offering an effective solution to manage these emerging co-contaminants.
- 4 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessHigh-performance caffeic acid-based superhydrophilic membranes for efficient removal of microplastics-oil co-contaminants
Microplastic-oil co-contaminants have raised high environmental concerns due to their persistence and synergistic toxicity. However, conventional separation membranes, typically designed for single-pollutant removal, are ineffective against such complex systems. Moreover, the strong interfacial interactions between microplastics and oil promote aggregate formation, leading to severe membrane fouling and compromised separation performance. Herein, we present a robust, antifouling, and superhydrophilic membrane fabricated via sodium periodate-assisted co-deposition of caffeic acid and ε-polylysine for simultaneously removing both oil droplets and microplastic particles from contaminated water. The resulting caffeic acid/ε-polylysine composite superhydrophilic membrane achieves an impressive separation efficacy for various oil-in-water emulsions and polystyrene microplastics of different sizes. Notably, it exhibits superior separation performance for challenging microplastic-oil co-contaminants, with rejection of 99.89% for oil and 96.99% for 100-nm polystyrene microplastics over 300-min continuous filtration. It also sustains a high flux recovery, reflecting robust antifouling properties and thus highlighting a great potential for practical application in complex wastewater treatment. Additionally, the membrane shows a remarkable antibacterial activity even after 30 days of immersion. This study demonstrates a scalable and sustainable strategy for fabricating high-performance polyphenol-based antifouling membranes, offering an effective solution to manage these emerging co-contaminants.
- Open Access
Plasma Enabled Synthesis of Dual Phase Alkali Metals (Li, Na, K) & Water Co‐Intercalated V 2 O 5 3D TMO Clusters for High Performing Aqueous Zinc Ion Battery
Aqueous zinc‐ion batteries (AZIBs) have attracted considerable attention as a safe and cost‐effective to energy storage system. Cathode materials, which are critical to determining overall AZIB performance, remain a major hurdle to deployment. Currently, substantial energy is required for synthesis, while improvements in capacity and energy density remain necessary to compete with incumbent lithium‐ion batteries. Herein, we report a high‐performance and durable alkali metal (M = K, Na, Li) and water co‐intercalated vanadium oxide (M‐WiVO) cathode synthesized via a rapid (70 min) and energy‐efficient plasma‐assisted hydrothermal (PAHT) process. The M‐WiVO structure consists of water‐intercalated vanadium oxide (V 2 O 5 ·nH 2 O) and monoclinic M x V 2 O 5 phases, which provide expanded channels for rapid Zn 2+ ion transport. Among the M‐WiVO materials, K‐WiVO delivers the highest capacity of 526.7 mAh g −1 at 0.1 A g −1 (≈90% of the theoretical capacity of V 2 O 5 ) and retains 94.5% of its initial capacity after 4000 cycles at 10 A g −1 . Density functional theory (DFT) calculations confirm the stability of the dual‐intercalated framework and the superior performance of K‐WiVO. Overall, the monoclinic M x V 2 O 5 phase provides long‐term electrochemical stabilities; meanwhile, water intercalation in V 2 O 5 provides high capacity and facilitates the Zn 2+ ion transport, where the dual phase works synergistically to preserve the excellent AZIB performances in M‐WiVO.
Open AccessPlasma Enabled Synthesis of Dual Phase Alkali Metals (Li, Na, K) & Water Co‐Intercalated V 2 O 5 3D TMO Clusters for High Performing Aqueous Zinc Ion Battery
Aqueous zinc‐ion batteries (AZIBs) have attracted considerable attention as a safe and cost‐effective to energy storage system. Cathode materials, which are critical to determining overall AZIB performance, remain a major hurdle to deployment. Currently, substantial energy is required for synthesis, while improvements in capacity and energy density remain necessary to compete with incumbent lithium‐ion batteries. Herein, we report a high‐performance and durable alkali metal (M = K, Na, Li) and water co‐intercalated vanadium oxide (M‐WiVO) cathode synthesized via a rapid (70 min) and energy‐efficient plasma‐assisted hydrothermal (PAHT) process. The M‐WiVO structure consists of water‐intercalated vanadium oxide (V 2 O 5 ·nH 2 O) and monoclinic M x V 2 O 5 phases, which provide expanded channels for rapid Zn 2+ ion transport. Among the M‐WiVO materials, K‐WiVO delivers the highest capacity of 526.7 mAh g −1 at 0.1 A g −1 (≈90% of the theoretical capacity of V 2 O 5 ) and retains 94.5% of its initial capacity after 4000 cycles at 10 A g −1 . Density functional theory (DFT) calculations confirm the stability of the dual‐intercalated framework and the superior performance of K‐WiVO. Overall, the monoclinic M x V 2 O 5 phase provides long‐term electrochemical stabilities; meanwhile, water intercalation in V 2 O 5 provides high capacity and facilitates the Zn 2+ ion transport, where the dual phase works synergistically to preserve the excellent AZIB performances in M‐WiVO.
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (1) , 389-400
Cerium Oxide Incorporation for Radiation Tolerance and Stability in Perovskite Solar Cells
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (1) , 389-400
Cerium Oxide Incorporation for Radiation Tolerance and Stability in Perovskite Solar Cells
- Open Access
- 9 September 2025
- Published by Wiley in Small Structures
- Vol. 6 (9)
Plasma Assisted Hydrothermal Synthesis of 2D & 3D Water Intercalated V2O5 Nanosheet Clusters for High Performing Aqueous Zinc Ion Battery
- 9 September 2025
- Published by Wiley in Small Structures
- Vol. 6 (9)
Open AccessPlasma Assisted Hydrothermal Synthesis of 2D & 3D Water Intercalated V2O5 Nanosheet Clusters for High Performing Aqueous Zinc Ion Battery
- Open Access
- 10 July 2025
- Published by Wiley in Small Structures
Plasma Assisted Hydrothermal Synthesis of 2D & 3D Water Intercalated V2O5 Nanosheet Clusters for High Performing Aqueous Zinc Ion Battery
Conventional cathode material synthesis processes (sol–gel, hydrothermal, solid state reactions, and so on) are widely used in aqueous zinc ion battery research, which often requires lengthy, multistage steps involving high temperatures. Herein, a novel plasma‐assisted hydrothermal (PAHT) synthesis has been developed to synthesize 2D & 3D water‐intercalated vanadium oxide (WiVO) nanosheet clusters at low temperature (−1 at 0.1 A g−1, and maintaining 95.8% cycle retention after 4000 cycles at 10A g−1, demonstrating superior aqueous zinc ion batteries (AZIB) performances to anhydrous V2O5 & 2D WiVO nanosheets, backed up by rigorous density functional theory calculations and molecular dynamics simulations, elucidating the enhanced AZIB performances of WiVO 3D nanosheet clusters. Universality of the PAHT method is validated through the synthesis of 3D WiVO nanosheet clusters with comparable cell performance using various vanadium‐based precursors. Furthermore, the electrochemical degradation process of 2D & 3D nanosheet‐based cathode is also explored and the importance of nanosheet clustering, which impedes the degradation process, is demonstrated.
- 10 July 2025
- Published by Wiley in Small Structures
Open AccessPlasma Assisted Hydrothermal Synthesis of 2D & 3D Water Intercalated V2O5 Nanosheet Clusters for High Performing Aqueous Zinc Ion Battery
Conventional cathode material synthesis processes (sol–gel, hydrothermal, solid state reactions, and so on) are widely used in aqueous zinc ion battery research, which often requires lengthy, multistage steps involving high temperatures. Herein, a novel plasma‐assisted hydrothermal (PAHT) synthesis has been developed to synthesize 2D & 3D water‐intercalated vanadium oxide (WiVO) nanosheet clusters at low temperature (−1 at 0.1 A g−1, and maintaining 95.8% cycle retention after 4000 cycles at 10A g−1, demonstrating superior aqueous zinc ion batteries (AZIB) performances to anhydrous V2O5 & 2D WiVO nanosheets, backed up by rigorous density functional theory calculations and molecular dynamics simulations, elucidating the enhanced AZIB performances of WiVO 3D nanosheet clusters. Universality of the PAHT method is validated through the synthesis of 3D WiVO nanosheet clusters with comparable cell performance using various vanadium‐based precursors. Furthermore, the electrochemical degradation process of 2D & 3D nanosheet‐based cathode is also explored and the importance of nanosheet clustering, which impedes the degradation process, is demonstrated.
- Open Access
- 3 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (18) , 12949-12956
Hybrid SnO 2 /g-C 3 N 4 layers with plasma-induced modifications for enhanced charge transport in perovskite solar cells
The design of high-performance perovskite solar cells (PSCs) for indoor applications requires precise interface engineering to optimize charge extraction, particularly under low-light intensity conditions, where excess carrier density is limited. To enhance the charge extraction properties in PSCs, various carbon-based nanomaterials with varying functional groups have been utilized as electron transport layer (ETL) additives to address the issue with limited success. Thereby, in this work, we introduce a plasma-modified graphitic carbon nitride (GCN_PT) as an ETL interface layer additive which is deposited onto the SnO2 electron transport layer to enhance electron extraction. Plasma modification transforms randomly distributed GCN particles (200–500 nm) into uniformly sized nanoparticles (1–3 nm) while inducing partial graphitization, significantly improving conductivity and charge transport properties. These modifications enable more efficient extraction and transport of photogenerated carriers at the SnO2/GCN_PT interface, substantially enhancing short-circuit current density (JSC). This improvement is particularly pronounced under low-light indoor conditions, where reduced photon flux limits carrier generation within the perovskite layer. Notably, under 1000 lux indoor white LED illumination, the optimized SnO2/GCN_PT interface achieves a power conversion efficiency of approximately 39.80%, demonstrating its potential to advance indoor photovoltaic applications through enhanced JSC and interface optimization.
- 3 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (18) , 12949-12956
Open AccessHybrid SnO 2 /g-C 3 N 4 layers with plasma-induced modifications for enhanced charge transport in perovskite solar cells
The design of high-performance perovskite solar cells (PSCs) for indoor applications requires precise interface engineering to optimize charge extraction, particularly under low-light intensity conditions, where excess carrier density is limited. To enhance the charge extraction properties in PSCs, various carbon-based nanomaterials with varying functional groups have been utilized as electron transport layer (ETL) additives to address the issue with limited success. Thereby, in this work, we introduce a plasma-modified graphitic carbon nitride (GCN_PT) as an ETL interface layer additive which is deposited onto the SnO2 electron transport layer to enhance electron extraction. Plasma modification transforms randomly distributed GCN particles (200–500 nm) into uniformly sized nanoparticles (1–3 nm) while inducing partial graphitization, significantly improving conductivity and charge transport properties. These modifications enable more efficient extraction and transport of photogenerated carriers at the SnO2/GCN_PT interface, substantially enhancing short-circuit current density (JSC). This improvement is particularly pronounced under low-light indoor conditions, where reduced photon flux limits carrier generation within the perovskite layer. Notably, under 1000 lux indoor white LED illumination, the optimized SnO2/GCN_PT interface achieves a power conversion efficiency of approximately 39.80%, demonstrating its potential to advance indoor photovoltaic applications through enhanced JSC and interface optimization.
- Open Access
- 23 November 2024
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (2)
In‐Situ Pt‐Decorated, Direct Growth of Mixed Phase 2H/1T–MoSe2 on Carbon Paper for Enhanced Hydrogen Evolution Reaction
Metal dichalcogenide‐based 2D materials, gained considerable attention recently as a hydrogen evolution reaction (HER) electrocatalyst. In this work, we synthesized MoSe2‐based electrocatalyst via hydrothermal route with varying phase contents (1T/2H) and respective HER performances were evaluated under the acidic media (0.5 m H2SO4), where best HER performance was obtained from the sample consisting of mixed 1T/2H phases, which was directly grown on a carbon paper (167 mV at 10 mA cm−2) Furthermore, HER performance of electrocatalyst was further improved by in‐situ electrodeposition of Pt nanoparticles (0.15 wt%) on the MoSe2 surface, which lead to significant enhancement in the HER performances (133 mV at 10 mA cm−2). Finally, we conducted density functional theory calculations to reveal the origin of such enhanced performances when the mixed 1T/2H phases were present, where phase boundary region (1T/2H heterojunction) act as a low energy pathway for H2 adsorption and desorption via electron accumulation effect. Moreover, presence of the Pt nanoparticles tunes the electronic states of the MoSe2 based catalyst, resulting in the enhanced HER activity at heterointerface of 1T/2H MoSe2 while facilitating the hydrogen adsorption and desorption process providing a low energy pathway for HER. These results provide new insight on atomic level understanding of the MoSe2 based catalyst for HER application.
- 23 November 2024
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (2)
Open AccessIn‐Situ Pt‐Decorated, Direct Growth of Mixed Phase 2H/1T–MoSe2 on Carbon Paper for Enhanced Hydrogen Evolution Reaction
Metal dichalcogenide‐based 2D materials, gained considerable attention recently as a hydrogen evolution reaction (HER) electrocatalyst. In this work, we synthesized MoSe2‐based electrocatalyst via hydrothermal route with varying phase contents (1T/2H) and respective HER performances were evaluated under the acidic media (0.5 m H2SO4), where best HER performance was obtained from the sample consisting of mixed 1T/2H phases, which was directly grown on a carbon paper (167 mV at 10 mA cm−2) Furthermore, HER performance of electrocatalyst was further improved by in‐situ electrodeposition of Pt nanoparticles (0.15 wt%) on the MoSe2 surface, which lead to significant enhancement in the HER performances (133 mV at 10 mA cm−2). Finally, we conducted density functional theory calculations to reveal the origin of such enhanced performances when the mixed 1T/2H phases were present, where phase boundary region (1T/2H heterojunction) act as a low energy pathway for H2 adsorption and desorption via electron accumulation effect. Moreover, presence of the Pt nanoparticles tunes the electronic states of the MoSe2 based catalyst, resulting in the enhanced HER activity at heterointerface of 1T/2H MoSe2 while facilitating the hydrogen adsorption and desorption process providing a low energy pathway for HER. These results provide new insight on atomic level understanding of the MoSe2 based catalyst for HER application.