Panagiotis Dimas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Panagiotis Dimas has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Christos Makropoulos
National Technical University of Athens
4 shared publications- Christos Makropoulos
National Technical University of Athens
4 shared publications Andreas Efstratiadis
National Technical University of Athens
2 shared publications- Andreas Efstratiadis
Laboratory of Hydrology and Water Resources Development, School of Civil Engineering, National Technical University of Athens, Heroon Polytechneiou 9, 15780 Zographou, Greece
2 shared publications - Dimitrios Bouziotas
Department of Water Resources and Environmental Engineering, Urban Water Hydroinformatics Group, National Technical University of Athens, Athens, Greece
2 shared publications - Dionysios Nikolopoulos
Department of Water Resources and Environmental Engineering, School of Civil Engineering, National Technical University of Athens, Heroon Polytechneiou 5, 15780 Athens, Greece
2 shared publications
Latest Publications
- Open Access
- 26 August 2026
- Published by Taylor & Francis in Digital Water
- Vol. 4 (1)
A novel WDN pipe replacement prioritisation methodology and software
1. Water distribution networks (WDNs) constitute one of the most extensive and capital-intensive asset categories for urban water utilities (Engelhardt et al. 2000). As networks expand and age, bur...
- 26 August 2026
- Published by Taylor & Francis in Digital Water
- Vol. 4 (1)
Open AccessA novel WDN pipe replacement prioritisation methodology and software
1. Water distribution networks (WDNs) constitute one of the most extensive and capital-intensive asset categories for urban water utilities (Engelhardt et al. 2000). As networks expand and age, bur...
- Open Access
- 2 August 2025
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 128
Cascading impacts of individual failures across critical infrastructures: The case of upper dam breach in pumped-storage hydropower schemes
- 2 August 2025
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 128
Open AccessCascading impacts of individual failures across critical infrastructures: The case of upper dam breach in pumped-storage hydropower schemes
- 7 January 2025
- Published by Springer Nature in Water Resources Management
- Vol. 39 (6) , 2673-2700
Establishing a Strategic Blueprint for the Design and Evaluation of Flood Control Infrastructure in Extensive Watersheds
- 7 January 2025
- Published by Springer Nature in Water Resources Management
- Vol. 39 (6) , 2673-2700
Establishing a Strategic Blueprint for the Design and Evaluation of Flood Control Infrastructure in Extensive Watersheds
- Open Access
- 25 June 2024
- Published by IWA Publishing in Water Practice & Technology
- Vol. 19 (7) , 2693-2711
A large-scale evaluation of machine learning algorithms in mid-term water demand forecasting
Water utilities currently face challenges in accurately measuring user-end consumption as they have to visit every conventional meter that is installed in their service area. This study explores the use of accessible machine learning models to forecast water demand at two crucial temporal scales, addressing practical needs such as customer billing. To draw meaningful conclusions, these models were tested and trained from actual user-end water consumption data from over 2.1 million customers over a 10-year period. These data were provided by the Water and Sewage Company of Greece (EYDAP). The large-scale experiment included the use of statistical models (ARIMA and SARIMA), deep learning [long short-term memory (LSTM)], and clustering techniques (k-NN algorithm). The model with the best performance was ARIMA, outperforming all the other models including the more complex ones. The LSTM model did not perform as expected in predicting water consumption, it excelled only in predicting the total amount of water consumed. These forecasts can be valuable tools for water utility companies, aiding in tasks such as customer billing and water balance calculations. This paper covers all the necessary steps that must be taken to achieve meaningful user-end water consumption forecasts, from raw data preprocessing to hyperparameter tuning for machine learning algorithms.
- 25 June 2024
- Published by IWA Publishing in Water Practice & Technology
- Vol. 19 (7) , 2693-2711
Open AccessA large-scale evaluation of machine learning algorithms in mid-term water demand forecasting
Water utilities currently face challenges in accurately measuring user-end consumption as they have to visit every conventional meter that is installed in their service area. This study explores the use of accessible machine learning models to forecast water demand at two crucial temporal scales, addressing practical needs such as customer billing. To draw meaningful conclusions, these models were tested and trained from actual user-end water consumption data from over 2.1 million customers over a 10-year period. These data were provided by the Water and Sewage Company of Greece (EYDAP). The large-scale experiment included the use of statistical models (ARIMA and SARIMA), deep learning [long short-term memory (LSTM)], and clustering techniques (k-NN algorithm). The model with the best performance was ARIMA, outperforming all the other models including the more complex ones. The LSTM model did not perform as expected in predicting water consumption, it excelled only in predicting the total amount of water consumed. These forecasts can be valuable tools for water utility companies, aiding in tasks such as customer billing and water balance calculations. This paper covers all the necessary steps that must be taken to achieve meaningful user-end water consumption forecasts, from raw data preprocessing to hyperparameter tuning for machine learning algorithms.
- 7 September 2023
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 8 (4) , 919-933
Comparison of mudflow simulation models in an ephemeral mountainous stream in Western Greece using HEC-RAS and FLO-2D
- 7 September 2023
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 8 (4) , 919-933
Comparison of mudflow simulation models in an ephemeral mountainous stream in Western Greece using HEC-RAS and FLO-2D
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
A probabilistic framework to assess resilience in regional water systems - exploring the impact of circular water strategies
Contrary to the ‘make-use-dispose’ linearity seen in conventional resource management, circular economy design principles have been proposed as an alternative that reduces waste and promotes efficiency. These principles find use in water as well, offering an alternative against centralized water systems planning and management. Despite the intrinsic links between circularity and resilience, few studies have advanced the identification and discussion of linkage beyond a theoretical or conceptual level. Moreover, few studies have estimated resilience with a probabilistic approach to include the inherent future uncertainty located simultaneously at source and demand level. In this study, a probabilistic framework to assess resilience for regional systems across multiple domains (drinking water, wastewater and drainage) is presented. The framework is based on stress-testing using an urban water cycle model, paired with reliability-based Key Performance Indicators (KPIs) that describe system resilience for each domain and for several different stress-testing factors (stressors). For its practical implementation, the framework is then applied to the provincial case study of Delfland, the Netherlands, where different circular water strategies are evaluated in terms of their overall resilience, (a.) firstly deterministically to explore the impact of individual stressors, and (b.) probabilistically to evaluate system performance against future uncertainty. The results quantitatively demonstrate that circular water options lead to water systems of increased resilience. The more circular dimensions are addressed through interventions and management strategies, the more robust resilience profiles become across different urban water cycle domains, thus securing regional water systems against future uncertainty.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessA probabilistic framework to assess resilience in regional water systems - exploring the impact of circular water strategies
Contrary to the ‘make-use-dispose’ linearity seen in conventional resource management, circular economy design principles have been proposed as an alternative that reduces waste and promotes efficiency. These principles find use in water as well, offering an alternative against centralized water systems planning and management. Despite the intrinsic links between circularity and resilience, few studies have advanced the identification and discussion of linkage beyond a theoretical or conceptual level. Moreover, few studies have estimated resilience with a probabilistic approach to include the inherent future uncertainty located simultaneously at source and demand level. In this study, a probabilistic framework to assess resilience for regional systems across multiple domains (drinking water, wastewater and drainage) is presented. The framework is based on stress-testing using an urban water cycle model, paired with reliability-based Key Performance Indicators (KPIs) that describe system resilience for each domain and for several different stress-testing factors (stressors). For its practical implementation, the framework is then applied to the provincial case study of Delfland, the Netherlands, where different circular water strategies are evaluated in terms of their overall resilience, (a.) firstly deterministically to explore the impact of individual stressors, and (b.) probabilistically to evaluate system performance against future uncertainty. The results quantitatively demonstrate that circular water options lead to water systems of increased resilience. The more circular dimensions are addressed through interventions and management strategies, the more robust resilience profiles become across different urban water cycle domains, thus securing regional water systems against future uncertainty.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Water Distribution Network performance and device placement location schemes assessment under multiple hydraulic transient generative scenarios
Water Distribution Networks (WDNs) have been thoroughly investigated in terms of uncertainty in the demand at the household level. Meanwhile, novel frameworks exploring the resilience of such systems under contemporary threats (such as cyber-physical attacks) have also significantly contributed to the enhanced security, reliability, and efficiency in the process of their design and operation. On the contrary, other network effects such as hydraulic transients -also known as pressure surges or water hammers- are often overlooked, despite the significant disturbance they could induce to the steady-state flow conditions of the WDN due to the added pressure variability and the heavily increased internal pressure forces exerted on pipelines. Pressure forces and pressure variability are dependent on highly variable phenomena, such as pipe failures and/or operational decisions (i.e., valve closing schedules, pump operations). Evidently, predicting the behavior of transients under an ensemble of scenarios is of utmost importance, which is not limited only to the network design and operational scopes, but extends to applications such as optimal sensor and protection device placement, dimensioning or placement of pressure neutralizers (e.g., surge tanks/chambers), establishment of appropriate pump shutdown schedules. Avowedly, commercial software for transient simulation in WDNs is available, yet open-source packages suitable for research applications, such as TSNet, have only recently become publicly available and, hence, provide a flexible framework for coupling with other applications. In this work, the python packages WNTR and TSNet are integrated to present a framework for evaluating hydraulic transient conditions via EPANET simulation of multiple scenarios of pipe bursts and valve closures according to control schemes. The results can be utilized to assess the WDN’s performance and monitoring sensors placement location schemes in the light of protection under transient flow occurrence.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessWater Distribution Network performance and device placement location schemes assessment under multiple hydraulic transient generative scenarios
Water Distribution Networks (WDNs) have been thoroughly investigated in terms of uncertainty in the demand at the household level. Meanwhile, novel frameworks exploring the resilience of such systems under contemporary threats (such as cyber-physical attacks) have also significantly contributed to the enhanced security, reliability, and efficiency in the process of their design and operation. On the contrary, other network effects such as hydraulic transients -also known as pressure surges or water hammers- are often overlooked, despite the significant disturbance they could induce to the steady-state flow conditions of the WDN due to the added pressure variability and the heavily increased internal pressure forces exerted on pipelines. Pressure forces and pressure variability are dependent on highly variable phenomena, such as pipe failures and/or operational decisions (i.e., valve closing schedules, pump operations). Evidently, predicting the behavior of transients under an ensemble of scenarios is of utmost importance, which is not limited only to the network design and operational scopes, but extends to applications such as optimal sensor and protection device placement, dimensioning or placement of pressure neutralizers (e.g., surge tanks/chambers), establishment of appropriate pump shutdown schedules. Avowedly, commercial software for transient simulation in WDNs is available, yet open-source packages suitable for research applications, such as TSNet, have only recently become publicly available and, hence, provide a flexible framework for coupling with other applications. In this work, the python packages WNTR and TSNet are integrated to present a framework for evaluating hydraulic transient conditions via EPANET simulation of multiple scenarios of pipe bursts and valve closures according to control schemes. The results can be utilized to assess the WDN’s performance and monitoring sensors placement location schemes in the light of protection under transient flow occurrence.
- Open Access
- 23 October 2022
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 21 (1) , 37
Simulation Framework for Pipe Failure Detection and Replacement Scheduling Optimization
Identification of water network pipes susceptible to failure is a demanding task, which requires a coherent and extensive dataset that contains both their physical characteristics (i.e., pipe inner diameter, construction material, length, etc.) and a snapshot of their current state, including their age and failure history. As water networks are critical for human prosperity, the need to adequately forecast failure is immediate. A huge number of Machine Learning (ML) and AI models have been applied; furthermore, only a few of them have been coupled with algorithms that translate the failure probability into asset management decision support strategies. The latter should include pipe rehabilitation planning and/or replacement scheduling under monetary/time unit constraints. Additionally, the assessment of each decision is seldomly performed by developing performance indices stemming from simulation. Hence, in this work, the outline of a framework able to incorporate pipe failure detection techniques utilizing statistical, ML and AI models with pipe replacement scheduling optimization and assessment of state-of-the-art resilience indices via simulation scenarios is presented. The framework is demonstrated in a real-world-based case study.
- 23 October 2022
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 21 (1) , 37
Open AccessSimulation Framework for Pipe Failure Detection and Replacement Scheduling Optimization
Identification of water network pipes susceptible to failure is a demanding task, which requires a coherent and extensive dataset that contains both their physical characteristics (i.e., pipe inner diameter, construction material, length, etc.) and a snapshot of their current state, including their age and failure history. As water networks are critical for human prosperity, the need to adequately forecast failure is immediate. A huge number of Machine Learning (ML) and AI models have been applied; furthermore, only a few of them have been coupled with algorithms that translate the failure probability into asset management decision support strategies. The latter should include pipe rehabilitation planning and/or replacement scheduling under monetary/time unit constraints. Additionally, the assessment of each decision is seldomly performed by developing performance indices stemming from simulation. Hence, in this work, the outline of a framework able to incorporate pipe failure detection techniques utilizing statistical, ML and AI models with pipe replacement scheduling optimization and assessment of state-of-the-art resilience indices via simulation scenarios is presented. The framework is demonstrated in a real-world-based case study.
- Open Access
Revisiting Flood Hazard Assessment Practices under a Hybrid Stochastic Simulation Framework
We propose a novel probabilistic approach to flood hazard assessment, aiming to address the major shortcomings of everyday deterministic engineering practices in a computationally efficient manner. In this context, the principal sources of uncertainty are defined across the overall modeling procedure, namely, the statistical uncertainty of inferring annual rainfall maxima through distribution models that are fitted to empirical data, and the inherently stochastic nature of the underlying hydrometeorological and hydrodynamic processes. Our work focuses on three key facets, i.e., the temporal profile of storm events, the dependence of flood generation mechanisms on antecedent soil moisture conditions, and the dependence of runoff propagation over the terrain and the stream network on the intensity of the flood event. These are addressed through the implementation of a series of cascade modules, based on publicly available and open-source software. Moreover, the hydrodynamic processes are simulated by a hybrid 1D/2D modeling approach, which offers a good compromise between computational efficiency and accuracy. The proposed framework enables the estimation of the uncertainty of all flood-related quantities, by means of empirically derived quantiles for given return periods. Lastly, a set of easily applicable flood hazard metrics are introduced for the quantification of flood hazard.
Open AccessRevisiting Flood Hazard Assessment Practices under a Hybrid Stochastic Simulation Framework
We propose a novel probabilistic approach to flood hazard assessment, aiming to address the major shortcomings of everyday deterministic engineering practices in a computationally efficient manner. In this context, the principal sources of uncertainty are defined across the overall modeling procedure, namely, the statistical uncertainty of inferring annual rainfall maxima through distribution models that are fitted to empirical data, and the inherently stochastic nature of the underlying hydrometeorological and hydrodynamic processes. Our work focuses on three key facets, i.e., the temporal profile of storm events, the dependence of flood generation mechanisms on antecedent soil moisture conditions, and the dependence of runoff propagation over the terrain and the stream network on the intensity of the flood event. These are addressed through the implementation of a series of cascade modules, based on publicly available and open-source software. Moreover, the hydrodynamic processes are simulated by a hybrid 1D/2D modeling approach, which offers a good compromise between computational efficiency and accuracy. The proposed framework enables the estimation of the uncertainty of all flood-related quantities, by means of empirically derived quantiles for given return periods. Lastly, a set of easily applicable flood hazard metrics are introduced for the quantification of flood hazard.