YWYi Wu

Yi Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yi Wu has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on the mechanical model and support optimization of deep cover vertical shaft based on the coupling effect of interlocking pile wellbore system

    by Wanglong Duan, Chao Du, Yi Wu, Lintao Li, Lidong Ren, Xuefu Zhang, Lei Jin, Wenjing Zhang

    Artificial ground freezing is a widely adopted method in vertical shaft construction. However, its applicability becomes limited under complex geological conditions in deep topsoil layers, where it may lead to structural failures, such as shaft collapse and groundwater ingress. To address these challenges, this study investigates the deep shaft construction project in the Wucaiwan region and proposes a coupled structural model that considers the interaction between interlocking piles and shaft lining. A theoretical formulation for calculating the required lining thickness is also derived based on thick-walled cylinder mechanics. Numerical simulations using Midas GTS are conducted for various combinations of interlocking pile diameters and lining thicknesses. The results indicate that increasing the lining thickness offers more effective deformation control than enlarging the pile diameter. In addition, the presence of underlying rock strata significantly reduces the vertical displacement of the shaft lining. These findings provide a theoretical and numerical basis for optimizing shaft support systems in deep and complex soil environments.


  • Open Access

    Research on the groundwater transport law during karst tunnel construction

    by Chao Gou, Yi Wu, Xianglong Tang, Changsong Dong, Bofeng Liu

    Based on the theory of fluid structure coupling, taking the karst tunnel in Zhongliangshan, Chongqing, as the research object, the numerical simulation method is used to study the spatiotemporal movement law of groundwater during the construction period and its impact on the stability of the tunnel. By comparing the differences in seepage field, displacement field, stress field, and water inflow between the three-step method and the double-sided wall guide method, the influence of the initial water head height and the surrounding rock’s permeability coefficient on the construction process was analyzed. The research results indicate that the double-sided wall guide method significantly reduces the deformation of the surrounding rock through the temporary support system (reducing the arch crown settlement by 48.78% and the arch bottom uplift by 31.13%), making it more suitable for construction in high water pressure and rich water formations. The permeability coefficient and head height have a significant positive impact on water inflow. The research results provide a theoretical basis and technical support for the selection of construction methods and disaster prevention in tunnel construction under complex hydrogeological conditions.

  • Open Access

    Vibration Performance of Steel Fiber Concrete Tunnel Lining by Adjacent Tunnel Blasting Construction

    by Li-Ming Wu, Zi-Jian Wang, Yong-Zai Chang, Feng Gao, Bin Zhang, Yi Wu, Han-Xiu Fan

    When constructing tunnels in mountainous areas, the drilling and blasting method is the most commonly used because of its economy. Ordinary reinforced concrete itself has defects such as poor crack resistance and brittleness. Therefore, when using the drilling and blasting method for ordinary reinforced concrete double-line tunnels, vibration phenomena will occur and cause cracks in the first-line tunnels, which will have adverse effects on the durability and safety of the tunnel. As a response, scholars have proposed the use of steel fiber-reinforced concrete as tunnel lining. In this paper, the LS-DYNA software is used to establish three models of plain concrete, ordinary concrete, and steel fiber-reinforced concrete, and numerical analysis is conducted with different amounts of explosives. The results show that the steel fiber-reinforced concrete tunnel lining has better performance than the other two concretes in tunnel construction.


  • Open Access

    A Finite Element Analysis of Tunnel Lining Demolition by Blasting for Subway Tunnel Expansion

    by Jie Zhou, Pengyu Shu, Bin Zhang, Baowang Deng, Yi Wu

    In this paper, a practical project of subway tunnel lining demolition via blasting for the construction of a subway station under the action of the blasting load and the weight of collapsed rock mass was proposed. The tunnel overbreak and underbreak quality, the failure mechanism of the tunnel lining structure, the particle peak velocity (PPV), and the stress evolution law of the surrounding rock caused by tunnel blasting were researched using LS-DYNA. Firstly, the results show that the blasting parameters presented in this paper can maintain the cross-section of a smooth outline of tunnel excavation and the overbreak or underbreak quality in control. Secondly, the tensile stress in the existing tunnel lining caused by blasting exceeded the concrete tensile strength, and the radius of the burst fracture was 0.86 m, which is greater than the thickness of the tunnel lining (0.7 m). Thirdly, the blasting stress in the surrounding rock peaked within 0.1 × 10−3 s after the blasting, and failure of the surrounding rock occurred. Moreover, the relationship between the PPV and the distance from the blasting center shows that the blasting parameters used in this paper can effectively control the PPV. Therefore, this study reveals that the expansion of existing tunnels into subway stations using this method can improve the efficiency of construction.


  • Open Access

    Mechanism and Application of Blasting Technology Using Phase-Difference Vibration Mitigation on Adjacent Railway Tunnel

    by Bin Zhang, Yuanfu Zhou, Xuefu Zhang, Zhaoyuan Zhang, Zijian Wang, Yi Wu

    The blasting vibration velocity is a widely used controlling index for the safety assessment of tunnel structures. How to reduce the impact of blasting vibration on the operation of adjacent railway tunnels is worth studying. In this paper, the initial phase-difference of blasting using phase-difference shock absorption is derived from the propagation theory of the blasting stress wave. When the initial phase-difference is Δφi=±(2n+1)π (n=1, 2, 3, ), the peak particle velocity (PPV) in the tunnel structure is decreased to the minimum. On the basis of blasting theory using phase-difference shock absorption, the blasting parameters were designed for the No. 2 drainage tunnel excavated which adjacent a railway tunnel from Guiyang to Changsha, and it carried out 4 times blasting tests. It was found that the PPV of the railway tunnel structure in X, Y, and Z directions reduced by 64.6, 66.25, and 81.26, respectively, which compared with the conventional blasting with the same total quality. Meanwhile, the amount of overbreak and underbreak can be controlled within 5. The results show that the effect of blasting technology using phase-difference vibration mitigation is obvious, which is able to match with the design requirements for the tunnel excavation contour. The blasting technology using phase-difference vibration mitigation can be achieved via controlling the blasting time interval accurately. Moreover, it is beneficial for enriching and developing the blasting vibration control technology.