Huan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Huan Liu has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Yuxuan Du
Key Laboratory of the Ministry of Education & Thin Film and Optical Manufacturing Technology, School of Opto-Electronic Engineering, Xi’an Technological University, Xi’an, Shaanxi 710021, China
9 shared publications - Jijie Zhao
Key Laboratory of Sensor and Sensor Technology, Institute of Sensor Technology, Gansu Academy of Sciences, Lanzhou, China
8 shared publications - Shuai Wen
Key Laboratory of the Ministry of Education & Thin Film and Optical Manufacturing Technology, School of Opto-Electronic Engineering, Xi’an Technological University, Xi’an, Shaanxi 710021, China
8 shared publications - Fei Xie
School of Optoelectronic Engineering, Xi’an Technological University, Xi’an 710021, China
4 shared publications - Minyu Bai
School of Optoelectronic Engineering, Xi’an Technological University, Xi’an 710021, China
4 shared publications - Fei Gao
School of Optoelectronic Engineering, Xi’an Technological University, Xi’an 710021, China
3 shared publications
Latest Publications
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (25) , 13007-13028
A first-principles study of polycyclic aromatic hydrocarbon-mediated PbS QD/2D BP 0D/2D hybrid-dimensional systems
Our first-principles calculations demonstrate that PAHs-mediated hybrid PbS QDs/2D BP establishes type-II band alignment and reinforced π–π stacking, offering theoretical foundations for 0D/2D hybrid photodetector design.
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (25) , 13007-13028
A first-principles study of polycyclic aromatic hydrocarbon-mediated PbS QD/2D BP 0D/2D hybrid-dimensional systems
Our first-principles calculations demonstrate that PAHs-mediated hybrid PbS QDs/2D BP establishes type-II band alignment and reinforced π–π stacking, offering theoretical foundations for 0D/2D hybrid photodetector design.
- 19 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (47) , 29532-29540
A two-step junction welding technique for achieving high-performance broadband silver nanowire transparent conductive films
Transparent conductive films (TCFs) are critical components of various optoelectronic and photovoltaic devices. The performance of TCFs is mainly ascribed to their superior transparency and low sheet resistance. However, the welding strategy for silver nanowires (AgNWs), the primary material used in TCFs, can significantly affect the optical and electrical properties of the films. Herein, we report a simple and effective method for preparing AgNWs TCFs with superior broadband transparency and conductivity. By applying pressure to the surface of graphene, we successfully enhanced the tight connections between loose nanowires. Based on this, we developed a high-performance, wide-spectrum TCF and employed ultraviolet welding as its post-treatment method. The sheet resistance of the electrode decreased to 27.1 Ω sq−1 with the addition of graphene films, and subsequent UV light welding further reduced the resistance value by 25.1%. Moreover, the incorporation of graphene films provides excellent protection for AgNWs against oxidation. One month later, compared to AgNWs without a protective coating, the increase in sheet resistance was reduced by 414.6%. This study provides a new method for preparing TCFs with wide spectrum and high performance.
- 19 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (47) , 29532-29540
A two-step junction welding technique for achieving high-performance broadband silver nanowire transparent conductive films
Transparent conductive films (TCFs) are critical components of various optoelectronic and photovoltaic devices. The performance of TCFs is mainly ascribed to their superior transparency and low sheet resistance. However, the welding strategy for silver nanowires (AgNWs), the primary material used in TCFs, can significantly affect the optical and electrical properties of the films. Herein, we report a simple and effective method for preparing AgNWs TCFs with superior broadband transparency and conductivity. By applying pressure to the surface of graphene, we successfully enhanced the tight connections between loose nanowires. Based on this, we developed a high-performance, wide-spectrum TCF and employed ultraviolet welding as its post-treatment method. The sheet resistance of the electrode decreased to 27.1 Ω sq−1 with the addition of graphene films, and subsequent UV light welding further reduced the resistance value by 25.1%. Moreover, the incorporation of graphene films provides excellent protection for AgNWs against oxidation. One month later, compared to AgNWs without a protective coating, the increase in sheet resistance was reduced by 414.6%. This study provides a new method for preparing TCFs with wide spectrum and high performance.
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9339-9352
A first-principles study of optoelectronic properties and electric field modulation in PbS quantum dot/graphene hybrid systems
First-principles DFT calculations reveal enhanced interaction between non-polar facets of PbS QDs and graphene. External electric fields can modulate energy levels and charge transfer, offering insights for optimizing PbS QD/graphene systems.
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9339-9352
A first-principles study of optoelectronic properties and electric field modulation in PbS quantum dot/graphene hybrid systems
First-principles DFT calculations reveal enhanced interaction between non-polar facets of PbS QDs and graphene. External electric fields can modulate energy levels and charge transfer, offering insights for optimizing PbS QD/graphene systems.
- Open Access
- 5 February 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (3) , 035918
Design and optimization of the performance of PbS quantum dot based vertical photodetector
Quantum dots (QDS) are widely used as photoactive materials for various optoelectronic applications, such as light-emitting diodes, photodetectors, lasers, and solar cells, because of their unique and outstanding physical properties for fabricating devices via solution-processing techniques and for varying the sizes of QD to modulate the band gap. In this study, we constructed a numerical model of a vertical photodetector using lead sulfide (PbS) quantum dot layer undergoing ligand exchange treatment with tetrabutylammonium iodide (TBAI) as the light absorption layer to obtain an optimized high-performance photodetector using 1D-Solar Cell Capacitance Simulator (SCAPS) software. For the hole transport layer (HTL) and electron transport layer (ETL), a PbS quantum dot layer that employs an ethanedithiol (EDT) ligand exchange scheme and a zinc oxide (ZnO) layer were utilized, respectively, with gold (Au) and indium tin oxide (ITO) as the bottom and upper electrodes, respectively. After optimizing the thickness and doping concentration of the absorption layer, we obtained a maximum responsivity of 0.4675 A W−1 and detectivity of 2.44 * 10 13 Jones at a reverse bias of 0.5 volts after optimizing of thickness and doping concentration of absorption layer showing an improvement of 19% and 87.7% respectively compared to the initial structure whose parameters originated from studies of PbS quantum dot solar cells with the same structure and materials, although optimization of other transport layers do not provide as great performance enhancement as absorption layer. This study demonstrates that the structural parameters of solar cells are not always applicable to photodetectors, and that photodetectors have great potential for numerical optimization. Ethical Compliance: All procedures performed in this study involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.
- 5 February 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (3) , 035918
Open AccessDesign and optimization of the performance of PbS quantum dot based vertical photodetector
Quantum dots (QDS) are widely used as photoactive materials for various optoelectronic applications, such as light-emitting diodes, photodetectors, lasers, and solar cells, because of their unique and outstanding physical properties for fabricating devices via solution-processing techniques and for varying the sizes of QD to modulate the band gap. In this study, we constructed a numerical model of a vertical photodetector using lead sulfide (PbS) quantum dot layer undergoing ligand exchange treatment with tetrabutylammonium iodide (TBAI) as the light absorption layer to obtain an optimized high-performance photodetector using 1D-Solar Cell Capacitance Simulator (SCAPS) software. For the hole transport layer (HTL) and electron transport layer (ETL), a PbS quantum dot layer that employs an ethanedithiol (EDT) ligand exchange scheme and a zinc oxide (ZnO) layer were utilized, respectively, with gold (Au) and indium tin oxide (ITO) as the bottom and upper electrodes, respectively. After optimizing the thickness and doping concentration of the absorption layer, we obtained a maximum responsivity of 0.4675 A W−1 and detectivity of 2.44 * 10 13 Jones at a reverse bias of 0.5 volts after optimizing of thickness and doping concentration of absorption layer showing an improvement of 19% and 87.7% respectively compared to the initial structure whose parameters originated from studies of PbS quantum dot solar cells with the same structure and materials, although optimization of other transport layers do not provide as great performance enhancement as absorption layer. This study demonstrates that the structural parameters of solar cells are not always applicable to photodetectors, and that photodetectors have great potential for numerical optimization. Ethical Compliance: All procedures performed in this study involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.
- 8 July 2023
- Published by Elsevier in Applied Surface Science
- Vol. 638
Photovoltaic high-performance broadband photodetector based on the heterojunction of MoS2/silicon nanopillar arrays
- 8 July 2023
- Published by Elsevier in Applied Surface Science
- Vol. 638
Photovoltaic high-performance broadband photodetector based on the heterojunction of MoS2/silicon nanopillar arrays
- Open Access
- 9 February 2023
- Published by Wiley in Journal of Nanomaterials
- Vol. 2023, 1-9
Si:HgTe Colloidal Quantum Dots Heterojunction-Based Infrared Photodiode
Integrated circuits and optoelectronics are currently dominated by silicon technology. However, silicons response wavelength is typically less than 1,100nm, limiting the application of silicon in machine vision, autonomous vehicles, and night vision. For infrared photodetectors, HgTe colloidal quantum dots (CQDs) are promising materials. Because of the adjustable bandgap, it responds over a wide spectral range. However, the construction of a high-quality junction between Si and HgTe CQDs continues to be difficult, thus restricting the scope of its application. In this article, we describe the synthesis, characterization, and correlation of HgTe CQDs with reaction temperature and nanocrystal size. We then fabricated HgTe-CQDs/silicon infrared photodiodes and discussed how the silicon resistivity affected their performance. We found that the devices prepared from 9.1nm HgTe quantum dots synthesized at 80C and a silicon substrate with a resistivity of 2050Ωcm has optimal performance parameters. This results in a responsivity of 0.2mA/W for 1,550nm incident light at room temperature. These results provide a direction for future silicon-compatible HgTe quantum dot infrared optoelectronics.
- 9 February 2023
- Published by Wiley in Journal of Nanomaterials
- Vol. 2023, 1-9
Open AccessSi:HgTe Colloidal Quantum Dots Heterojunction-Based Infrared Photodiode
Integrated circuits and optoelectronics are currently dominated by silicon technology. However, silicons response wavelength is typically less than 1,100nm, limiting the application of silicon in machine vision, autonomous vehicles, and night vision. For infrared photodetectors, HgTe colloidal quantum dots (CQDs) are promising materials. Because of the adjustable bandgap, it responds over a wide spectral range. However, the construction of a high-quality junction between Si and HgTe CQDs continues to be difficult, thus restricting the scope of its application. In this article, we describe the synthesis, characterization, and correlation of HgTe CQDs with reaction temperature and nanocrystal size. We then fabricated HgTe-CQDs/silicon infrared photodiodes and discussed how the silicon resistivity affected their performance. We found that the devices prepared from 9.1nm HgTe quantum dots synthesized at 80C and a silicon substrate with a resistivity of 2050Ωcm has optimal performance parameters. This results in a responsivity of 0.2mA/W for 1,550nm incident light at room temperature. These results provide a direction for future silicon-compatible HgTe quantum dot infrared optoelectronics.
- Open Access
Optimizing the Infrared Photoelectric Detection Performance of Pbs Quantum Dots through Solid-State Ligand Exchange
Lead sulfide (PbS) quantum dots (QDs) have attracted a great deal of attention in recent decades, due to their value for applications in optoelectronic devices. However, optimizing the performance of optoelectronic devices through ligand engineering has become a major challenge, as the surfactants that surround quantum dots impede the transport of electrons. In this paper, we prepared PbS QD films and photoconductive devices with four different ligands: 1,2-ethylenedithiol (EDT), tetrabutylammonium iodide (TBAI), hexadecyl trimethyl ammonium bromide (CTAB), and sodium sulfide (Na2S). A series of characterization studies confirmed that using the appropriate ligands in the solid-state ligand exchange step for thin film fabrication can significantly improve the responsivity. The devices treated with sodium sulfide showed the best sensitivity and a wider detection from 400 nm to 2300 nm, compared to the other ligand-treated devices. The responsivity of the champion device reached 95.6 mA/W under laser illumination at 980 nm, with an intensity of 50 mW/cm2.
Open AccessOptimizing the Infrared Photoelectric Detection Performance of Pbs Quantum Dots through Solid-State Ligand Exchange
Lead sulfide (PbS) quantum dots (QDs) have attracted a great deal of attention in recent decades, due to their value for applications in optoelectronic devices. However, optimizing the performance of optoelectronic devices through ligand engineering has become a major challenge, as the surfactants that surround quantum dots impede the transport of electrons. In this paper, we prepared PbS QD films and photoconductive devices with four different ligands: 1,2-ethylenedithiol (EDT), tetrabutylammonium iodide (TBAI), hexadecyl trimethyl ammonium bromide (CTAB), and sodium sulfide (Na2S). A series of characterization studies confirmed that using the appropriate ligands in the solid-state ligand exchange step for thin film fabrication can significantly improve the responsivity. The devices treated with sodium sulfide showed the best sensitivity and a wider detection from 400 nm to 2300 nm, compared to the other ligand-treated devices. The responsivity of the champion device reached 95.6 mA/W under laser illumination at 980 nm, with an intensity of 50 mW/cm2.
- Open Access
- 10 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (19) , 3540
Study on Ultrathin Silver Film Transparent Electrodes Based on Aluminum Seed Layers with Different Structures
Ag has the lowest electrical resistivity among all metals, and at the same time, the best optical properties in the visible and near-IR spectral range; it is therefore the most widely employed material for thin-metal-film-based transparent conductors. In this work, an ultra-thin transparent silver film electrode with aluminum as seed layer was prepared by a resistive thermal evaporation technique. Using a range of electrical, optical and surface morphology techniques, it can be noted that the presence of the thin layer of aluminum changes the growth kinetics (nucleation and evolution) of the thermal evaporation of Ag, leading to silver films with smooth surface morphology and high electrical conductivity, and the threshold thickness of the silver film is reduced. It is inferred that the aluminum layer showed a good infiltration effect on the ultra-thin silver film, by analyzing the transmittance spectrum, sheet resistance and surface morphology. Moreover, the average transmittance of silver film with 10 nm is 40% in the 400–2500 nm band, whereas the sheet resistance is 13 Ωsq −1. A series of experiments show that the introduction of Al seed layer has certain effect on improving the properties of transparent conductive silver films. Then, a new method for deposition of 1 nm Al seed layer was proposed; that is, the 1 nm aluminum infiltrated layer is divided into two or more layers, and the average transmittance of silver film with 5 nm is 60% in the 400–2500 nm band, whereas the sheet resistance does not exceed 100 Ω sq−1.
- 10 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (19) , 3540
Open AccessStudy on Ultrathin Silver Film Transparent Electrodes Based on Aluminum Seed Layers with Different Structures
Ag has the lowest electrical resistivity among all metals, and at the same time, the best optical properties in the visible and near-IR spectral range; it is therefore the most widely employed material for thin-metal-film-based transparent conductors. In this work, an ultra-thin transparent silver film electrode with aluminum as seed layer was prepared by a resistive thermal evaporation technique. Using a range of electrical, optical and surface morphology techniques, it can be noted that the presence of the thin layer of aluminum changes the growth kinetics (nucleation and evolution) of the thermal evaporation of Ag, leading to silver films with smooth surface morphology and high electrical conductivity, and the threshold thickness of the silver film is reduced. It is inferred that the aluminum layer showed a good infiltration effect on the ultra-thin silver film, by analyzing the transmittance spectrum, sheet resistance and surface morphology. Moreover, the average transmittance of silver film with 10 nm is 40% in the 400–2500 nm band, whereas the sheet resistance is 13 Ωsq −1. A series of experiments show that the introduction of Al seed layer has certain effect on improving the properties of transparent conductive silver films. Then, a new method for deposition of 1 nm Al seed layer was proposed; that is, the 1 nm aluminum infiltrated layer is divided into two or more layers, and the average transmittance of silver film with 5 nm is 60% in the 400–2500 nm band, whereas the sheet resistance does not exceed 100 Ω sq−1.
- Open Access
- 26 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2956
Performance Enhancement of Silver Nanowire-Based Transparent Electrodes by Ultraviolet Irradiation
Silver nanowires (AgNWs) are used as transparent electrodes (TE) in many devices. However, the contact mode between the nanowires is the biggest reason why the sheet resistance of silver nanowires is limited. Here, simple and effective ultraviolet (UV) irradiation welding is chosen to solve this problem. The influence of the power density of the UV irradiation on welding of the silver nanowires is studied and the fixed irradiation time is chosen as one minute. The range of the UV (380 nm) irradiation power is chosen from 30 mW/cm2 to 150 mW/cm2. First of all, the transmittance of the silver nanowire film is not found to be affected by the UV welding (400–11,000 nm). The sheet resistance of the silver nanowires decreases to 73.9% at 60 mW/cm2 and increases to 127.6% at 120 mW/cm2. The investigations on the UV irradiation time reveal that the sheet resistance of the AgNWs decreases continuously when the UV irradiation time is varied from 0 to 3 min, and drops to 57.3% of the initial value at 3 min. From 3–6 min of the continuous irradiation time, the change of the sheet resistance is not obvious, which reflects the self-limiting and self-termination of AgNWs welding. By changing the wavelength of the UV irradiation from 350–400 nm, it is found that the welding effect is best when the UV wavelength is 380 nm. The average transmittance, square resistance, and the figure of merit of the welded AgNWs at 400–780 nm are 95.98%, 56.5 Ω/sq, and 117.42 × 10−4 Ω−1, respectively. The UV-welded AgNWs are also used in silicon-based photodetectors, and the quantum efficiency of the device is improved obviously.
- 26 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2956
Open AccessPerformance Enhancement of Silver Nanowire-Based Transparent Electrodes by Ultraviolet Irradiation
Silver nanowires (AgNWs) are used as transparent electrodes (TE) in many devices. However, the contact mode between the nanowires is the biggest reason why the sheet resistance of silver nanowires is limited. Here, simple and effective ultraviolet (UV) irradiation welding is chosen to solve this problem. The influence of the power density of the UV irradiation on welding of the silver nanowires is studied and the fixed irradiation time is chosen as one minute. The range of the UV (380 nm) irradiation power is chosen from 30 mW/cm2 to 150 mW/cm2. First of all, the transmittance of the silver nanowire film is not found to be affected by the UV welding (400–11,000 nm). The sheet resistance of the silver nanowires decreases to 73.9% at 60 mW/cm2 and increases to 127.6% at 120 mW/cm2. The investigations on the UV irradiation time reveal that the sheet resistance of the AgNWs decreases continuously when the UV irradiation time is varied from 0 to 3 min, and drops to 57.3% of the initial value at 3 min. From 3–6 min of the continuous irradiation time, the change of the sheet resistance is not obvious, which reflects the self-limiting and self-termination of AgNWs welding. By changing the wavelength of the UV irradiation from 350–400 nm, it is found that the welding effect is best when the UV wavelength is 380 nm. The average transmittance, square resistance, and the figure of merit of the welded AgNWs at 400–780 nm are 95.98%, 56.5 Ω/sq, and 117.42 × 10−4 Ω−1, respectively. The UV-welded AgNWs are also used in silicon-based photodetectors, and the quantum efficiency of the device is improved obviously.
- Open Access
- 18 February 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (4) , 681
In Situ Growth of PbS/PbI2 Heterojunction and Its Photoelectric Properties
In this paper, PbI2 thin films with a uniform surface morphology and compact structure were prepared by adjusting the spin coating process parameters. On such a basis, the PbS/PbI2 heterojunction was fabricated on the PbI2 surface by the method of in situ chemical replacement growth. The results show that the PbS/PbI2 heterojunction grown by this method has a clear interface and is closely combined. The introduction of a PbS layer enables its spectral response range to cover the visible and near-infrared regions. Compared with the PbI2 thin film device, its responsivity is increased by three orders of magnitude, its response time reduced by 42%, and its recovery time decreased by nearly 1/2 under 450 nm illumination. In the case that there is no response for the PbI2 thin film device under 980 nm illumination, the specific detectivity of the PbS/PbI2 heterojunction device still amounts to 1.8 × 108 Jones. This indicates that the in situ chemical replacement is a technique that can construct a high-quality heterojunction in a simple process. PbS/PbI2 heterojunction fabricated by this method has a visible–near-infrared light detection response range, which provides a new idea for creating visible–near-infrared common-path detection systems.
- 18 February 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (4) , 681
Open AccessIn Situ Growth of PbS/PbI2 Heterojunction and Its Photoelectric Properties
In this paper, PbI2 thin films with a uniform surface morphology and compact structure were prepared by adjusting the spin coating process parameters. On such a basis, the PbS/PbI2 heterojunction was fabricated on the PbI2 surface by the method of in situ chemical replacement growth. The results show that the PbS/PbI2 heterojunction grown by this method has a clear interface and is closely combined. The introduction of a PbS layer enables its spectral response range to cover the visible and near-infrared regions. Compared with the PbI2 thin film device, its responsivity is increased by three orders of magnitude, its response time reduced by 42%, and its recovery time decreased by nearly 1/2 under 450 nm illumination. In the case that there is no response for the PbI2 thin film device under 980 nm illumination, the specific detectivity of the PbS/PbI2 heterojunction device still amounts to 1.8 × 108 Jones. This indicates that the in situ chemical replacement is a technique that can construct a high-quality heterojunction in a simple process. PbS/PbI2 heterojunction fabricated by this method has a visible–near-infrared light detection response range, which provides a new idea for creating visible–near-infrared common-path detection systems.