Jian Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jian Zhao has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Jingjuan Du
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China
4 shared publications Di Wu
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
3 shared publicationsSinan Liu
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
3 shared publications- Chaojiang Li
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China
2 shared publications - Ming Yu
School of Computer and Information Engineering, Tianjin Chengjian University, Tianjin 300384, China
2 shared publications Tao Yang
School of Mechanical Engineering, Tiangong University, China
2 shared publications
Latest Publications
- 4 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Prediction model in drilling of unidirectional thermoplastic CF/PEEK composite laminates considering the chisel edge
Carbon fiber reinforced thermoplastic composites (CFRTP) are increasingly becoming critical lightweight and high-efficiency materials in manufacturing fields such as aerospace and defense technology, owing to their high strength, high modulus, and environmentally friendly recyclability. As a high-performance CFRTP, carbon fiber reinforced polyetheretherketone (CF/PEEK) composites are typically joined with other materials through drilling, where the thrust force is a key parameter affecting hole quality. A novel predictive model for the thrust force in unidirectional CF/PEEK (UD-CF/PEEK) composites was established based on the two-parameter elastic foundation theory and Hertz contact, taking into account tool structure and material characteristics. Experimental validation results showed that the prediction errors for the thrust forces of the chisel edge and the main cutting edge were 1.46% and 8.89%, respectively, and the prediction error for the total thrust force was 6.27%. Furthermore, by investigating the influence of different drilling parameters on the thrust force of UD-CF/PEEK, it was found that at a constant spindle speed, an increase in the feed rate leads to a rising trend in the thrust forces of both the chisel edge and the main cutting edge. This finding provides theoretical guidance for low-damage hole-making in thermoplastic CF/PEEK composites.
- 4 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Prediction model in drilling of unidirectional thermoplastic CF/PEEK composite laminates considering the chisel edge
Carbon fiber reinforced thermoplastic composites (CFRTP) are increasingly becoming critical lightweight and high-efficiency materials in manufacturing fields such as aerospace and defense technology, owing to their high strength, high modulus, and environmentally friendly recyclability. As a high-performance CFRTP, carbon fiber reinforced polyetheretherketone (CF/PEEK) composites are typically joined with other materials through drilling, where the thrust force is a key parameter affecting hole quality. A novel predictive model for the thrust force in unidirectional CF/PEEK (UD-CF/PEEK) composites was established based on the two-parameter elastic foundation theory and Hertz contact, taking into account tool structure and material characteristics. Experimental validation results showed that the prediction errors for the thrust forces of the chisel edge and the main cutting edge were 1.46% and 8.89%, respectively, and the prediction error for the total thrust force was 6.27%. Furthermore, by investigating the influence of different drilling parameters on the thrust force of UD-CF/PEEK, it was found that at a constant spindle speed, an increase in the feed rate leads to a rising trend in the thrust forces of both the chisel edge and the main cutting edge. This finding provides theoretical guidance for low-damage hole-making in thermoplastic CF/PEEK composites.
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Heat Transfer Research and Optimisation of Spray Oil Cooling System for IPMSM in EVs
With the increasing demand for high power density in motors for electric vehicles, an effective cooling structure directly impacts the safety and stability of motor operation. To improve the cooling effect of the electric drive system, a novel triple‐spray oil cooling structure for the winding end was proposed. This paper focuses on the heat transfer research using CFD‐thermal coupling evaluation for a 60 kW, 6000r/min interior permanent magnet synchronous motor (IPMSM). And it was investigated with a multi‐objective optimisation method based on Strength Pareto Evolutionary Algorithm II (SPEA‐II). FEM was adopted to perform fluid‐solid coupled heat transfer calculation for the IPMSM. In the paper, it was analysed of the variation trends of cooling structure pressure, winding end pressure, and the maximum temperature of motor with different inlet velocities. By comprehensively selecting the inlet velocity, the heat dissipation characteristics were summarised. Furthermore, a multi‐parameter sensitivity of the cooling structure was conducted, and an optimisation method was researched with response surface methodology. Based on SPEA‐II algorithm, the optimal solution for the four parameters of the oil cooling structure was determined. Moreover, the multiphase flow characteristics and thermal field distribution of the motor before and after optimisation were comparatively analysed. The results indicate that the maximum temperature after optimisation is reduced by approximately 10%–20% under both operating conditions of the rated speed and peak speed. Finally, the prototype and platform were built for the temperature rise experiments. It was verified the accuracy of the simulation calculation and the rationality of the multi‐objective optimisation method. This research provides valuable insights into heat dissipation in motors and optimisation analysis.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Open AccessHeat Transfer Research and Optimisation of Spray Oil Cooling System for IPMSM in EVs
With the increasing demand for high power density in motors for electric vehicles, an effective cooling structure directly impacts the safety and stability of motor operation. To improve the cooling effect of the electric drive system, a novel triple‐spray oil cooling structure for the winding end was proposed. This paper focuses on the heat transfer research using CFD‐thermal coupling evaluation for a 60 kW, 6000r/min interior permanent magnet synchronous motor (IPMSM). And it was investigated with a multi‐objective optimisation method based on Strength Pareto Evolutionary Algorithm II (SPEA‐II). FEM was adopted to perform fluid‐solid coupled heat transfer calculation for the IPMSM. In the paper, it was analysed of the variation trends of cooling structure pressure, winding end pressure, and the maximum temperature of motor with different inlet velocities. By comprehensively selecting the inlet velocity, the heat dissipation characteristics were summarised. Furthermore, a multi‐parameter sensitivity of the cooling structure was conducted, and an optimisation method was researched with response surface methodology. Based on SPEA‐II algorithm, the optimal solution for the four parameters of the oil cooling structure was determined. Moreover, the multiphase flow characteristics and thermal field distribution of the motor before and after optimisation were comparatively analysed. The results indicate that the maximum temperature after optimisation is reduced by approximately 10%–20% under both operating conditions of the rated speed and peak speed. Finally, the prototype and platform were built for the temperature rise experiments. It was verified the accuracy of the simulation calculation and the rationality of the multi‐objective optimisation method. This research provides valuable insights into heat dissipation in motors and optimisation analysis.
- Open Access
- 25 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-15
An improved A* algorithm for generating four-track trajectory planning to adapt to longitudinal rugged terrain
A four-wheeled robot can stride through longitudinal trenches to adapt to terrain challenges and effectively reach the target position in unstructured space, thus achieving navigation in rough terrain. Establishing a trajectory planning method to plan four paths simultaneously is necessary. Firstly, a grid map is based on the longitudinal trench terrain. Secondly, according to the robot’s four-wheel size and chassis height, the robot can safely stand in the grid sequence. Finally, the minimum chassis and road height and the maximum roll Angle are added to the objective cost function of the traditional A* algorithm. An improved A* algorithm plans a four-wheel straddling path through the longitudinal ditch in the safe standing sequence. Simulation experiments prove that proposed method can effectively plan the four-wheel path on complex terrain. The planned path can be changed according to the adjustment of the weight values corresponding to the distance to the target, the minimum distance from the chassis to the ground, and the roll Angle. Such changes prove that the proposed method can effectively plan the path according to the actual situation, focusing on the speed (whether the path planning can be carried out) and the safety (whether the bottom dragging and rollover can be considered). The actual experiment proves that the robot can cross the longitudinal ditch in the form of left and right wheels. When the distance is about 10.5 m, the robot can pass through the longitudinal ditch quickly and safely in 19.8 s at a speed of 0.53 m/s, keeping the robot’s tilt angle less than 20°.
- 25 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-15
Open AccessAn improved A* algorithm for generating four-track trajectory planning to adapt to longitudinal rugged terrain
A four-wheeled robot can stride through longitudinal trenches to adapt to terrain challenges and effectively reach the target position in unstructured space, thus achieving navigation in rough terrain. Establishing a trajectory planning method to plan four paths simultaneously is necessary. Firstly, a grid map is based on the longitudinal trench terrain. Secondly, according to the robot’s four-wheel size and chassis height, the robot can safely stand in the grid sequence. Finally, the minimum chassis and road height and the maximum roll Angle are added to the objective cost function of the traditional A* algorithm. An improved A* algorithm plans a four-wheel straddling path through the longitudinal ditch in the safe standing sequence. Simulation experiments prove that proposed method can effectively plan the four-wheel path on complex terrain. The planned path can be changed according to the adjustment of the weight values corresponding to the distance to the target, the minimum distance from the chassis to the ground, and the roll Angle. Such changes prove that the proposed method can effectively plan the path according to the actual situation, focusing on the speed (whether the path planning can be carried out) and the safety (whether the bottom dragging and rollover can be considered). The actual experiment proves that the robot can cross the longitudinal ditch in the form of left and right wheels. When the distance is about 10.5 m, the robot can pass through the longitudinal ditch quickly and safely in 19.8 s at a speed of 0.53 m/s, keeping the robot’s tilt angle less than 20°.
- Open Access
- 2 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1523
Loss Research and Thermal Analysis of BLDC Hollow-Cup Motor Under Reactor Suppression
In order to avoid overheating of a BLDC permanent magnet (PM) motor at high speeds, this paper focuses on the loss reduction of a 90 W 47,000 r/min BLDC hollow-cup motor. It is proposed to provide an optimizing method for the series reactors and the parameterization of reactors in the motor system. The finite element method (FEM) is used to calculate and analyze the time harmonic of air-gap magnetic flux density, stator core loss, and rotor eddy current loss in two cases: with a series reactor and without a reactor. By parameterizing the inductance value, the optimal resistance value is determined to minimize motor loss. In addition, an electromagnetic–thermal coupling analysis is conducted, and the results show that the temperature distribution of the stator core, winding, and rotor are improved under reactor suppression. Finally, an experimental platform is built to verify the temperature increase and the efficiency of the motor load operation. A clear reference for the research and optimization analysis of motor loss reduction is provided.
- 2 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1523
Open AccessLoss Research and Thermal Analysis of BLDC Hollow-Cup Motor Under Reactor Suppression
In order to avoid overheating of a BLDC permanent magnet (PM) motor at high speeds, this paper focuses on the loss reduction of a 90 W 47,000 r/min BLDC hollow-cup motor. It is proposed to provide an optimizing method for the series reactors and the parameterization of reactors in the motor system. The finite element method (FEM) is used to calculate and analyze the time harmonic of air-gap magnetic flux density, stator core loss, and rotor eddy current loss in two cases: with a series reactor and without a reactor. By parameterizing the inductance value, the optimal resistance value is determined to minimize motor loss. In addition, an electromagnetic–thermal coupling analysis is conducted, and the results show that the temperature distribution of the stator core, winding, and rotor are improved under reactor suppression. Finally, an experimental platform is built to verify the temperature increase and the efficiency of the motor load operation. A clear reference for the research and optimization analysis of motor loss reduction is provided.
- 5 July 2024
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 21 (4) , 1-15
Lightweight safety helmet detection algorithm using improved YOLOv5
- 5 July 2024
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 21 (4) , 1-15
Lightweight safety helmet detection algorithm using improved YOLOv5
- Open Access
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 89965-89973
Modeling Method for Pose Error of Machine Tool Linear Feed System Based on the Principle of Minimum Potential Energy
In the present research, a method to model the pose error of the machine tool feed system is proposed based on the principle of minimum potential energy. Firstly, the force-moment equilibrium equation of the feed system is established by mechanical analysis. Secondly, the force of the single slider is analyzed based on Hertzian contact theory, and the force state of the slider under the action of the guideway error is obtained. The elastic displacements of the single slider in the horizontal and vertical directions are solved based on the principle of the minimal potential energy. Subsequently, the pose error of the feeding system is obtained by using the plane fitting principle. Finally, the correctness of the proposed method is verified through experiments, and the experimental results are in good agreement with the theoretical results.
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 89965-89973
Open AccessModeling Method for Pose Error of Machine Tool Linear Feed System Based on the Principle of Minimum Potential Energy
In the present research, a method to model the pose error of the machine tool feed system is proposed based on the principle of minimum potential energy. Firstly, the force-moment equilibrium equation of the feed system is established by mechanical analysis. Secondly, the force of the single slider is analyzed based on Hertzian contact theory, and the force state of the slider under the action of the guideway error is obtained. The elastic displacements of the single slider in the horizontal and vertical directions are solved based on the principle of the minimal potential energy. Subsequently, the pose error of the feeding system is obtained by using the plane fitting principle. Finally, the correctness of the proposed method is verified through experiments, and the experimental results are in good agreement with the theoretical results.
- Open Access
Equipment Identification and Localization Method Based on Improved YOLOv5s Model for Production Line
Intelligent video surveillance based on artificial intelligence, image processing, and other advanced technologies is a hot topic of research in the upcoming era of Industry 5.0. Currently, low recognition accuracy and low location precision of devices in intelligent monitoring remain a problem in production lines. This paper proposes a production line device recognition and localization method based on an improved YOLOv5s model. The proposed method can achieve real-time detection and localization of production line equipment such as robotic arms and AGV carts by introducing CA attention module in YOLOv5s network model architecture, GSConv lightweight convolution method and Slim-Neck method in Neck layer, add Decoupled Head structure to the Detect layer. The experimental results show that the improved method achieves 93.6% Precision, 85.6% recall, and 91.8% mAP@0.5, and the Pascal VOC2007 public dataset test shows that the improved method effectively improves the recognition accuracy. The research results can substantially improve the intelligence level of production lines and provide an important reference for manufacturing industries to realize intelligent and digital transformation.
Open AccessEquipment Identification and Localization Method Based on Improved YOLOv5s Model for Production Line
Intelligent video surveillance based on artificial intelligence, image processing, and other advanced technologies is a hot topic of research in the upcoming era of Industry 5.0. Currently, low recognition accuracy and low location precision of devices in intelligent monitoring remain a problem in production lines. This paper proposes a production line device recognition and localization method based on an improved YOLOv5s model. The proposed method can achieve real-time detection and localization of production line equipment such as robotic arms and AGV carts by introducing CA attention module in YOLOv5s network model architecture, GSConv lightweight convolution method and Slim-Neck method in Neck layer, add Decoupled Head structure to the Detect layer. The experimental results show that the improved method achieves 93.6% Precision, 85.6% recall, and 91.8% mAP@0.5, and the Pascal VOC2007 public dataset test shows that the improved method effectively improves the recognition accuracy. The research results can substantially improve the intelligence level of production lines and provide an important reference for manufacturing industries to realize intelligent and digital transformation.
- Open Access
- 25 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12082
Optimization Strategy for Modal Test Measurement Points of Large-Span Steel Beams Based on Improved Particle Swarm Optimization Algorithm with Random Weights
In order to obtain better vibration response data and improve the accuracy of results in large-span steel beam modal tests, this paper proposes an optimization strategy for the arrangement of measurement points on large-span steel beams. First, an optimized arrangement of large-span steel beam measurement points was proposed based on an improved particle swarm optimization algorithm; the test function verified the superiority of the improved algorithm. Secondly, the deck of a steel tube truss girder bridge (STTGB) was taken as the research object; the computational modal analysis method was adopted to obtain the computational modal results of the bridge deck. In addition, measurement points were arranged on the bridge deck according to the uniform distribution method and the proposed optimization algorithm, and modal tests were conducted. Finally, the modal parameters of the bridge deck based on the two arrangement methods were obtained and compared to the best arrangement method for the STTGB deck. The results show that the proposed method has good efficiency in the optimal arrangement of the bridge deck measurement points and the obtained modal parameters have high accuracy. Therefore, this paper has important guiding significance for the study of structural dynamic characteristics using the distribution method based on an optimization algorithm.
- 25 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12082
Open AccessOptimization Strategy for Modal Test Measurement Points of Large-Span Steel Beams Based on Improved Particle Swarm Optimization Algorithm with Random Weights
In order to obtain better vibration response data and improve the accuracy of results in large-span steel beam modal tests, this paper proposes an optimization strategy for the arrangement of measurement points on large-span steel beams. First, an optimized arrangement of large-span steel beam measurement points was proposed based on an improved particle swarm optimization algorithm; the test function verified the superiority of the improved algorithm. Secondly, the deck of a steel tube truss girder bridge (STTGB) was taken as the research object; the computational modal analysis method was adopted to obtain the computational modal results of the bridge deck. In addition, measurement points were arranged on the bridge deck according to the uniform distribution method and the proposed optimization algorithm, and modal tests were conducted. Finally, the modal parameters of the bridge deck based on the two arrangement methods were obtained and compared to the best arrangement method for the STTGB deck. The results show that the proposed method has good efficiency in the optimal arrangement of the bridge deck measurement points and the obtained modal parameters have high accuracy. Therefore, this paper has important guiding significance for the study of structural dynamic characteristics using the distribution method based on an optimization algorithm.
- 29 October 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (11) , 1-16
Multi-objective optimisation of cutting parameters for drilling-induced damages and thrust force in AFRP drilling
- 29 October 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (11) , 1-16
Multi-objective optimisation of cutting parameters for drilling-induced damages and thrust force in AFRP drilling
- Open Access
- 20 September 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-14
Noisy Low-Illumination Image Enhancement Based on Parallel Duffing Oscillator and IMOGOA
In complex environment, the captured images face several kinds of problems, including low illumination and intensive noise, which deteriorates image quality and has a great impact on the follow-up work. In this work, inspired by stochastic resonance theory, we design a model that considers the spatial characteristics of image and noise reduction and enhancement are simultaneously realized. The 8-neighborhood pixel extraction method and the Duffing oscillator model are used to parallel process the image, and then the image details are restored by homomorphic filter. In order to optimize the parameters of parallel Duffing oscillator model and homomorphic filter adaptively, multiobjective grasshopper optimization algorithm is introduced into the method. Sobol sequence and differential mutation operators are used to improve the optimization algorithm, and the fitness function is constructed by using peak signal-to-noise ratio and standard deviation. To verify the effectiveness of the proposed method, low-illumination image data with Gaussian noise is used for subjective and objective evaluation. The experimental results show that the proposed algorithm gives prominence to useful information, which has smaller color distortion and better visual quality.
- 20 September 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-14
Open AccessNoisy Low-Illumination Image Enhancement Based on Parallel Duffing Oscillator and IMOGOA
In complex environment, the captured images face several kinds of problems, including low illumination and intensive noise, which deteriorates image quality and has a great impact on the follow-up work. In this work, inspired by stochastic resonance theory, we design a model that considers the spatial characteristics of image and noise reduction and enhancement are simultaneously realized. The 8-neighborhood pixel extraction method and the Duffing oscillator model are used to parallel process the image, and then the image details are restored by homomorphic filter. In order to optimize the parameters of parallel Duffing oscillator model and homomorphic filter adaptively, multiobjective grasshopper optimization algorithm is introduced into the method. Sobol sequence and differential mutation operators are used to improve the optimization algorithm, and the fitness function is constructed by using peak signal-to-noise ratio and standard deviation. To verify the effectiveness of the proposed method, low-illumination image data with Gaussian noise is used for subjective and objective evaluation. The experimental results show that the proposed algorithm gives prominence to useful information, which has smaller color distortion and better visual quality.