EBEdward J. Barron

Edward J. Barron

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Edward J. Barron has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cold Extrusion of Stretchable Liquid Metal–Polymer Composite Feedstock for Intrinsically Conductive 3D Printing

    by Dane N. Wedgeworth, Junsik Choi, Justin M. Anderson, Travis L. Thornell, Edward J. Barron Iii, Michael J. Bortner, Michael D. Bartlett

    Additive manufacturing of soft conductive materials enables flexible electronics, sensors, and robotic systems, yet is often constrained by high-temperature melt processing, postprint activation, or rigid conductive inclusions that reduce compliance. Here, we introduce a cold-extrusion strategy to create feedstock for liquid metal (LM)/thermoplastic elastomer composites that overcomes these limitations, enabling additive manufacturing of intrinsically conductive soft structures. By lightly solvating the polymer matrix, the composite enters a transient, putty-like processing state that enables extrusion without elevated temperature while preserving high LM loading (>60 vol %) and uniform droplet dispersion. Crucially, we leverage the high shear forces inherent to the extrusion process to drive droplet coalescence within the putty, directly forming a feedstock with a percolated, electrically conductive network. The continuously extruded LM/thermoplastic polyurethane feedstock is then pelletized and directly fabricated into multidimensional, conductive architectures using elevated-temperature extrusion-based 3D printing, without the need for thermal sintering, mechanical embossing, or secondary conductive inclusions. The printed composites reach notable conductivities of 0.4–1.8 × 104 S/m while retaining extensibility above 200% strain, demonstrating an additive manufacturing workflow that enables simultaneous printability, conductivity, and mechanical compliance. These results establish a general strategy for additive manufacturing of conductive thermoplastic elastomer composites for scalable fabrication of soft electronic and robotic systems.

  • Open Access

    Fiber‐reinforced Liquid Metal Composites With Automated Circuit Fabrication for Structurally‐Integrated Power Transfer

    by John Joyce, Charles K. Van Horn, Nathaniel J. Valentin, Angelica Phan, Michael D. Bartlett, Edward J. Barron

    Liquid metal composites (LMCs) combine polymer processability with thermal and electrical functionality, making them promising materials for electronics integration. While LMCs have largely been explored in soft polymers, the integration of liquid metal into load‐bearing composites could translate the unique processability and multifunctional response of liquid‐metal systems to structural materials. This work demonstrates a materials and manufacturing method for the fabrication of rigid, multifunctional, fiber‐reinforced liquid metal composites (FibRe LMCs) that can be locally transformed from dielectric to electrically conductive through an automated computer numerical control (CNC) milling process. By incorporating fiberglass and Kevlar fabrics with liquid metal‐vinyl ester resins, these composites exhibit an uncommon combination of tensile modulus ( GPa) and electrical conductivity ( S ), while enabling digitally directed circuit fabrication within structural composites. Milled circuits demonstrate resilient functionality, maintaining RF response after cyclic bending, possessing self‐healing conductive pathways that are robust to extreme damage, and providing continued function after exposure to elevated temperature, freezing, and underwater environments. Demonstration of a CNC‐fabricated rectifying antenna embedded within a load‐bearing composite highlights the potential of FibRe LMCs as mechanically robust structural electronics for integrated power transfer, sensing, and communication.

  • Open Access

    The magneto-mechanical coupling of multiphase magnetorheological elastomers

    by Edward J Barron Iii, Ella T Williams, Nathan Lazarus, Michael D Bartlett

    Magnetorheological elastomers (MREs) are soft magnetic composites that achieve tunable changes in stiffness and damping in the presence of a magnetic field. Rigid particle composite (RC) MREs have been studied for decades for their potential applications to automotive dampers and robotic systems. Recently, magnetic fluid composite (FC) MREs have been developed which utilize magnetic fluids as inclusions to elastomers. An investigation into how inclusion phase affects magneto-mechanical performance may greatly improve MRE design capabilities. Here we experimentally evaluate the impact of solid and liquid magnetic inclusions on MRE properties, construct a simple model that captures the performance of diverse MRE material architectures, and demonstrate the use of the model to create material design maps relating the material structure, zero-field properties, and applied field to the elastic modulus and specific loss. The magneto-mechanical response is evaluated for three material architectures: RC, FC, and hybrid composite MREs that use solid particles, magnetic fluids, and a combination of the two as inclusions respectively. The model is developed through magnetic and mechanical energy principles, which suggests that the phase of the magnetic inclusions impacts the change in energy density during deformation. We show that the magneto-mechanical coupling factor is dependent on the zero-field properties of the composites, which allows for the development of material design maps to inform the fabrication of MREs based on desired properties.


  • Open Access

    Liquid metal‐elastomer composites for water‐resilient soft electronics

    by Edward J. Barron, Ella T. Williams, Brittan T. Wilcox, Dong Hae Ho, Michael D. Bartlett

    Liquid metal‐elastomer composites have immense potential for emerging electronic applications due to their exceptional mechanical and functional properties. Underwater exploration is one area of interest for these composites, where divers or robots could benefit from wearable sensing, health monitoring, and energy harvesting. However, the influence of water submersion on liquid metal composites is not well understood. Here, the effect of underwater environments on the mechanical, thermal, and electrical properties of liquid metal composites exposed to month‐long aging is quantified. Under most conditions, liquid metal composites maintain their initial properties over the course of aging. However, for composites with high volume loadings of liquid metal ( = 80%) exposed to saltwater conditions, a decrease up to 70% in tensile modulus and up to 44% in thermal conductivity can occur. The aging environments were not shown to have an effect on the electrical conductivity of the composites. Liquid metal composites are then shown to outperform traditional copper electrodes after saltwater aging, demonstrating these soft, multifunctional composites as strong candidates for wearable, water‐resistant devices and machines.


  • Open Access

    A unified understanding of magnetorheological elastomers for rapid and extreme stiffness tuning

    by Edward J. Barron Iii, Ella T. Williams, Ravi Tutika, Nathan Lazarus, Michael D. Bartlett

    A unified design approach and predictive model are presented to create magnetorheological elastomer (MRE) materials for extreme stiffness tuning, up to 70×, with rapid (∼20 ms) and reversible shape change.


  • Rubrene single crystal solar cells and the effect of crystallinity on interfacial recombination

    by Duygu Akin Kara, Edmund K. Burnett, Koray Kara, Ozlem Usluer, Benjamin P. Cherniawski, Edward J. Barron, Burak Gultekin, Mahmut Kus, Alejandro L. Briseno

    Single crystal studies provide a better understanding of the basic properties of organic photovoltaic devices. Therefore, in this work, rubrene single crystals with a thickness of 250 nm to 1000 nm were used to produce an inverted bilayer organic solar cell. Subsequently, polycrystalline rubrene (orthorhombic, triclinic) and amorphous bilayer solar cells of the same thickness as single crystals were studied to make comparisons across platforms. To investigate how single crystal, polycrystalline (triclinic-orthorhombic) and amorphous forms alter the charge carrier recombination mechanism at the rubrene/PCBM interface, light intensity measurements were carried out. The light intensity dependency of the JSC, VOC and FF parameters in organic solar cells with different forms of rubrene was determined. Monomolecular (Shockley Read Hall) recombination is observed in devices employing amorphous and polycrystalline rubrene in addition to bimolecular recombination, whereas the single crystal device is weakly affected by trap assisted SRH recombination due to reduced trap states at the donor acceptor interface. To date, the proposed work is the only systematic study examining transport and interface recombination mechanisms in organic solar cells produced by different structure forms of rubrene.


  • Top Cited Papers

    Shape morphing mechanical metamaterials through reversible plasticity

    by Dohgyu Hwang, Edward J. Barron, A. B. M. Tahidul Haque, Michael D. Bartlett

    Biological organisms such as the octopus can reconfigure their shape and properties to perform diverse tasks. However, soft machines struggle to achieve complex configurations, morph into shape to support loads, and go between multiple states reversibly. Here, we introduce a multifunctional shape-morphing material with reversible and rapid polymorphic reconfigurability. We couple elastomeric kirigami with an unconventional reversible plasticity mechanism in metal alloys to rapidly ( < 0.1 seconds) morph flat sheets into complex, load-bearing shapes, with reversibility and self-healing through phase change. This kirigami composite overcomes trade-offs in deformability and load-bearing capacity and eliminates power requirements to sustain reconfigured shapes. We demonstrate this material through integration with onboard control, motors, and power to create a soft robotic morphing drone, which autonomously transforms from a ground to air vehicle and an underwater morphing machine, which can be reversibly deployed to collect cargo.