Gøril Jahrsengene
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gøril Jahrsengene has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Zhaohui Wang
SINTEF
3 shared publicationsAna Maria Martinez
SINTEF
2 shared publicationsCharly Lemoine
Université Grenoble ALPES, CEA, LITEN, DTS, INES
2 shared publicationsEli Ringdalen
SINTEF AS, Department of Metal Production and Processing
2 shared publicationsMarthe Nybrodahl
SINTEF
2 shared publications- Ana Maria Martinez
SINTEF
1 shared publication
Latest Publications
- Open Access
- 9 November 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 584
Bio-pitch and coal-tar pitch mixture as a binder in carbon anodes for aluminium electrolysis
- 9 November 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 584
Open AccessBio-pitch and coal-tar pitch mixture as a binder in carbon anodes for aluminium electrolysis
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (55) , 2672
Effect of Electrolyte Composition, Current Density, Capacity and Aluminium Quality on Aluminium Anode Behaviour in an Aluminium-Carbon Battery Using AlCl 3 :[Emim]Cl Electrolyte
Lithium-ion batteries are currently the dominating battery technology in the market, but the increased demand for batteries [1] combined with the safety requirements, materials availability and sustainability evaluations, makes it important to investigate new battery approaches. Aluminium-Carbon (Al-C) batteries are suggested as candidates using cheap, safe and more abundant electrode materials, but do introduce new challenges. In an Al-C battery, the aluminium has the role as the anode and carbon as the cathode; during charging anions intercalate into the carbon structure, while the aluminium deposit on the anode [2]. Research have focused on the electrolytes [3], and several types of carbon cathode materials have also been investigated [4]. The aluminium anode has been given less attention, despite issues like presence of an insulating oxide film, dendrite formation, volume expansion, and self-corrosion [5]. Both surface treatment and alloying could change positively the surface properties of the aluminium anode [6]. An established non-aqueous electrolyte that is shown to function well for Al-C batteries is based on a mixture of AlCl 3 dissolved in 1-ethyl-3-methylimidazolium chloride ([EMIm]Cl), typically in molar composition 1:1 to 2:1 AlCl 3 :[EMIm]Cl. In this work, two different compositions of this ionic liquid electrolyte have been investigated, with molar ratio 1.3:1 and 2:1, with a goal of understanding the differences with respect to the negative aluminium electrode in an Al-C battery. Two types of electrodeposition experiments have been conducted. In the first setup, the aluminium deposition occurred on constant current density on Al or Mo wires using a 3-electrode setup. In the second setup, a battery type PAT-Cell (EL-CELL®) with an Al reference ring was used in a symmetric setup to cycle aluminium electrodes of different alloy quality for a minimum of 50 times or 100 hours. The current density used was in the 0.1-0.5 mA/cm 2 range, with a given capacity in the range of 0.1-1 mAh/cm 2 . Aluminium wires and electrodes were cleaned using dimethyl carbonate before investing them using Scanning Electrode Microscopy. The 1.3:1 ratio appeared stable under all conditions, giving repeatable and almost non-changing potential measurements for both deposition and dissolution for 50 cycles, with only a small increase in potential values using 0.1 and 0.5 mA/cm 2 . The 2:1 electrolyte behaved somewhat differently when using high current density, the initial cycles typically varying a lot prior to the potential stabilization, and a large difference in potential when varying the current density was also observed. Additionally, under certain conditions using an aluminium purity of 99 %, additional signals on both deposition and dissolution were measured after the initial cycles using the 2:1 electrolyte, indicating additional electrochemical reactions (see associated figure). This could be caused by the presence of Fe, an impurity confirmed by SEM-EDS for this aluminium purity, which may dissolve and deposit after a certain amount of time. Although the 2:1 electrolyte appeared to be harsher on the proposed aluminium reaction with higher potentials and possible new reactions, independently of the parameters chosen the reactions occurring on the aluminium electrodes appeared to stabilize over time, indicating a good applicability in the proposed Al-C battery. Acknowledgements This project has received funding from The Research Council of Norway: Contract number 331964. Partners in the project are NTNU, SINTEF, Vianode, Beyonder and Equinor ASA. References [1] B. Jones et al.(2023) The World Economy 46 2-26 [2] M-C. Lin et al. (2015) Nature 520, 324-328 [3] K.V. Kravchyk & M.V. Kovalenko (2020), Communications Chemistry 3, 120 [4] Y.Ru et al. (2019), J. Mater. Chem. A 7, 14391-14418 [5] M. Jiang et al. (2022), Adv. Mater . 34, 2102026 [6] G.Razaz et al. (2024) ACS Appl. Mater. Interfaces , 16, 65725−65736 Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (55) , 2672
Effect of Electrolyte Composition, Current Density, Capacity and Aluminium Quality on Aluminium Anode Behaviour in an Aluminium-Carbon Battery Using AlCl 3 :[Emim]Cl Electrolyte
Lithium-ion batteries are currently the dominating battery technology in the market, but the increased demand for batteries [1] combined with the safety requirements, materials availability and sustainability evaluations, makes it important to investigate new battery approaches. Aluminium-Carbon (Al-C) batteries are suggested as candidates using cheap, safe and more abundant electrode materials, but do introduce new challenges. In an Al-C battery, the aluminium has the role as the anode and carbon as the cathode; during charging anions intercalate into the carbon structure, while the aluminium deposit on the anode [2]. Research have focused on the electrolytes [3], and several types of carbon cathode materials have also been investigated [4]. The aluminium anode has been given less attention, despite issues like presence of an insulating oxide film, dendrite formation, volume expansion, and self-corrosion [5]. Both surface treatment and alloying could change positively the surface properties of the aluminium anode [6]. An established non-aqueous electrolyte that is shown to function well for Al-C batteries is based on a mixture of AlCl 3 dissolved in 1-ethyl-3-methylimidazolium chloride ([EMIm]Cl), typically in molar composition 1:1 to 2:1 AlCl 3 :[EMIm]Cl. In this work, two different compositions of this ionic liquid electrolyte have been investigated, with molar ratio 1.3:1 and 2:1, with a goal of understanding the differences with respect to the negative aluminium electrode in an Al-C battery. Two types of electrodeposition experiments have been conducted. In the first setup, the aluminium deposition occurred on constant current density on Al or Mo wires using a 3-electrode setup. In the second setup, a battery type PAT-Cell (EL-CELL®) with an Al reference ring was used in a symmetric setup to cycle aluminium electrodes of different alloy quality for a minimum of 50 times or 100 hours. The current density used was in the 0.1-0.5 mA/cm 2 range, with a given capacity in the range of 0.1-1 mAh/cm 2 . Aluminium wires and electrodes were cleaned using dimethyl carbonate before investing them using Scanning Electrode Microscopy. The 1.3:1 ratio appeared stable under all conditions, giving repeatable and almost non-changing potential measurements for both deposition and dissolution for 50 cycles, with only a small increase in potential values using 0.1 and 0.5 mA/cm 2 . The 2:1 electrolyte behaved somewhat differently when using high current density, the initial cycles typically varying a lot prior to the potential stabilization, and a large difference in potential when varying the current density was also observed. Additionally, under certain conditions using an aluminium purity of 99 %, additional signals on both deposition and dissolution were measured after the initial cycles using the 2:1 electrolyte, indicating additional electrochemical reactions (see associated figure). This could be caused by the presence of Fe, an impurity confirmed by SEM-EDS for this aluminium purity, which may dissolve and deposit after a certain amount of time. Although the 2:1 electrolyte appeared to be harsher on the proposed aluminium reaction with higher potentials and possible new reactions, independently of the parameters chosen the reactions occurring on the aluminium electrodes appeared to stabilize over time, indicating a good applicability in the proposed Al-C battery. Acknowledgements This project has received funding from The Research Council of Norway: Contract number 331964. Partners in the project are NTNU, SINTEF, Vianode, Beyonder and Equinor ASA. References [1] B. Jones et al.(2023) The World Economy 46 2-26 [2] M-C. Lin et al. (2015) Nature 520, 324-328 [3] K.V. Kravchyk & M.V. Kovalenko (2020), Communications Chemistry 3, 120 [4] Y.Ru et al. (2019), J. Mater. Chem. A 7, 14391-14418 [5] M. Jiang et al. (2022), Adv. Mater . 34, 2102026 [6] G.Razaz et al. (2024) ACS Appl. Mater. Interfaces , 16, 65725−65736 Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (55) , 2690
Molten Oxide Electrolysis Process for Zero Emission Mn-Ferroalloy Production
Manganese ferroalloys are important alloying additives in steel and aluminium, produced efficiently by carbothermic reduction in Submerged Arc Furnaces (SAF). These processes emit 0.9-1.3 kg CO 2 /kg Mn ferroalloy [1]. Decarbonising the energy system is a first and very important step, but it will not be enough because carbon dioxide is also a product of the metal-producing reactions themselves. Some relatively mature technologies such as biocarbon reductants and carbon capture and storage or use (CCSU), may allow the industry to move away from fossil CO 2 emissions while continuing to use the carbothermic reduction route for ferroalloy production. However, there are many reasons to look beyond these carbon-based solutions and investigate the possibility to completely decarbonise the industry. Electrolytic production of Mn-alloys is the most direct way to electrify and decarbonize process, compared to e.g., hydrogen reduction and metallothermic reduction. Electrolytic manganese metal (EMM), a very pure manganese, is today produced electrochemically through an aqueous electrowinning process, but electrowinning processes producing alloys and with higher throughput is currently under evaluation for several Mn-alloy producers. In this work, a molten oxide electrolysis (MOE) process [2] at 1300-1400 °C with an inert anode for O 2 production is investigated as an alternative CO 2 -free production process of liquid Mn/FeMn/other Mn-alloys from MnO /Mn ores. The suggested process in the attached figure looks similar as aluminium primary production using traditional molten salts, and the MOE process for iron production have been demonstrated by Boston Metal [3]. Advantages of the process include the production of a liquid product (high throughput), no or low emission of halogenides, fines can be used as raw material, low carbon content alloys are produced directly, and less steps before metal production should give a lower capex. The electrowinning process is likely to require pre-reduction of the ore, but this could e.g. be accomplished with H 2 [4]. The main challenges are related to the typically high viscosity of the molten oxide melt compared to traditional molten salts, materials selection related to the melt composition and corrosion, the oxidizing atmosphere in the cell which may oxidize the Mn resulting in lower current efficiency, and the high energy consumption related to electrowinning of oxides without carbon. Electrolysis experiments with an electrolyte containing MnO, Al 2 O 3 , SiO 2 , MgO, and CaO with a metal alloy as the oxygen-evolving inert anode have been conducted, using a variation of cathode materials like Mo [5], Fe, and W, at 1250-1450 °C. The process of using MOE and oxygen evolving electrodes was confirmed to be able to produce Mn-alloys using the consumable Mo and Fe cathodes, which appeared easier than producing pure Mn with a more inert cathode material due to the evaporation of metal at the high temperatures. Acknowledgements This project has received funding from The Research Council of Norway: Contract number 344259 (ZeSiM). Partners in the project are SINTEF, NTNU, Elkem ASA, Eramet Norway AS, Finnfjord AS and Wacker Chemicals Norway. References [1] M. Sommerfeld and B. Friedrich (2021), Replacing Fossil Carbon in the Production of Ferroalloys with a Focus on Bio-Based Carbon: A Review. Minerals , 11 (11), pp.1286 [2] A. Allanore (2014), Features and Challenges of Molten Oxide Electrolytes for Metal Extraction. J. Electrochem. Soc. , 162 , pp. E13 [3] Boston Metal: https://www.bostonmetal.com/ [4] J. Davies et. al. (2023) Pre-reduction of United Manganese of Kalahari Ore in CO/CO 2 , H 2 /H 2 O, and H 2 Atmospheres, Metall Mater Trans B , 54 , pp. 515–535 [5] K.S. Osen et.al. (2023), CO 2 Free FeMn/Mn Production Through Molten Oxide Electrolysis, TMS 2023: Advances in Pyrometallurgy , pp. 267 Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (55) , 2690
Molten Oxide Electrolysis Process for Zero Emission Mn-Ferroalloy Production
Manganese ferroalloys are important alloying additives in steel and aluminium, produced efficiently by carbothermic reduction in Submerged Arc Furnaces (SAF). These processes emit 0.9-1.3 kg CO 2 /kg Mn ferroalloy [1]. Decarbonising the energy system is a first and very important step, but it will not be enough because carbon dioxide is also a product of the metal-producing reactions themselves. Some relatively mature technologies such as biocarbon reductants and carbon capture and storage or use (CCSU), may allow the industry to move away from fossil CO 2 emissions while continuing to use the carbothermic reduction route for ferroalloy production. However, there are many reasons to look beyond these carbon-based solutions and investigate the possibility to completely decarbonise the industry. Electrolytic production of Mn-alloys is the most direct way to electrify and decarbonize process, compared to e.g., hydrogen reduction and metallothermic reduction. Electrolytic manganese metal (EMM), a very pure manganese, is today produced electrochemically through an aqueous electrowinning process, but electrowinning processes producing alloys and with higher throughput is currently under evaluation for several Mn-alloy producers. In this work, a molten oxide electrolysis (MOE) process [2] at 1300-1400 °C with an inert anode for O 2 production is investigated as an alternative CO 2 -free production process of liquid Mn/FeMn/other Mn-alloys from MnO /Mn ores. The suggested process in the attached figure looks similar as aluminium primary production using traditional molten salts, and the MOE process for iron production have been demonstrated by Boston Metal [3]. Advantages of the process include the production of a liquid product (high throughput), no or low emission of halogenides, fines can be used as raw material, low carbon content alloys are produced directly, and less steps before metal production should give a lower capex. The electrowinning process is likely to require pre-reduction of the ore, but this could e.g. be accomplished with H 2 [4]. The main challenges are related to the typically high viscosity of the molten oxide melt compared to traditional molten salts, materials selection related to the melt composition and corrosion, the oxidizing atmosphere in the cell which may oxidize the Mn resulting in lower current efficiency, and the high energy consumption related to electrowinning of oxides without carbon. Electrolysis experiments with an electrolyte containing MnO, Al 2 O 3 , SiO 2 , MgO, and CaO with a metal alloy as the oxygen-evolving inert anode have been conducted, using a variation of cathode materials like Mo [5], Fe, and W, at 1250-1450 °C. The process of using MOE and oxygen evolving electrodes was confirmed to be able to produce Mn-alloys using the consumable Mo and Fe cathodes, which appeared easier than producing pure Mn with a more inert cathode material due to the evaporation of metal at the high temperatures. Acknowledgements This project has received funding from The Research Council of Norway: Contract number 344259 (ZeSiM). Partners in the project are SINTEF, NTNU, Elkem ASA, Eramet Norway AS, Finnfjord AS and Wacker Chemicals Norway. References [1] M. Sommerfeld and B. Friedrich (2021), Replacing Fossil Carbon in the Production of Ferroalloys with a Focus on Bio-Based Carbon: A Review. Minerals , 11 (11), pp.1286 [2] A. Allanore (2014), Features and Challenges of Molten Oxide Electrolytes for Metal Extraction. J. Electrochem. Soc. , 162 , pp. E13 [3] Boston Metal: https://www.bostonmetal.com/ [4] J. Davies et. al. (2023) Pre-reduction of United Manganese of Kalahari Ore in CO/CO 2 , H 2 /H 2 O, and H 2 Atmospheres, Metall Mater Trans B , 54 , pp. 515–535 [5] K.S. Osen et.al. (2023), CO 2 Free FeMn/Mn Production Through Molten Oxide Electrolysis, TMS 2023: Advances in Pyrometallurgy , pp. 267 Figure 1
- 3 March 2025
- Published by Springer Nature
- p. 911-918
Electrochemical Characterization of Bubble Behaviour on Pilot Anodes with Varying Porosity and Coke Quality
- 3 March 2025
- Published by Springer Nature
- p. 911-918
Electrochemical Characterization of Bubble Behaviour on Pilot Anodes with Varying Porosity and Coke Quality
- 22 February 2025
- Published by Springer Nature
- p. 113-125
Photovoltaic Waste Management: Technologies and Strategies to Recycle c-Si and CI(G)S PV Waste
- 22 February 2025
- Published by Springer Nature
- p. 113-125
Photovoltaic Waste Management: Technologies and Strategies to Recycle c-Si and CI(G)S PV Waste
- Open Access
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29174-29183
Circular recycling concept for silver recovery from photovoltaic cells in Ethaline deep eutectic solvent
Reducing the number of stages, energy costs and carbon footprint of recycling processes is essential to overcome environmental challenges. The interest in replacing the acids used in traditional hydrometallurgical methods with deep eutectic solvents (DES), which are less toxic and more environmentally friendly, has been growing. The aim of this study is to estimate the potential use of this class of solvents in an ionometallurgical process of leaching and electrodeposition to recover silver as part of the recycling of solar panels, a major challenge of the years to come. In the present work, a circular recycling concept based on an iron redox shuttle was studied to leach and recover silver via electrodeposition. Different DESs were evaluated in combination with a hexahydrated iron(III) chloride oxidizing agent. Ethaline DES has gained significant interest as it can attain a high silver leaching efficiency of 99.9% on crystallized silicon cell scraps at 75 °C. The promising results led to a comprehensive study of limits of this chemical system, focusing on the relation between the concentration of species (iron and water), the interfacial potential of silver (electrochemical measurements), and surface evolution (X-ray photoelectron spectroscopy analysis). Silver leaching was determined as a mixed control mechanism involving chemical and species diffusion dependence. The concentration of iron(III) chloride appeared crucial, determining the kinetic of formation of a poorly soluble AgCl layer. Electrodeposition from leachate highlighted the need to use an oxygen-free atmosphere to produce high-quality silver. Finally, leaching at 75 °C and electrodeposition at 50 °C of silver from crystallized silicon cell scraps were demonstrated using Ethaline (1 : 2) + FeCl3·6H2O (0.12 mol L−1) under an argon atmosphere.
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29174-29183
Open AccessCircular recycling concept for silver recovery from photovoltaic cells in Ethaline deep eutectic solvent
Reducing the number of stages, energy costs and carbon footprint of recycling processes is essential to overcome environmental challenges. The interest in replacing the acids used in traditional hydrometallurgical methods with deep eutectic solvents (DES), which are less toxic and more environmentally friendly, has been growing. The aim of this study is to estimate the potential use of this class of solvents in an ionometallurgical process of leaching and electrodeposition to recover silver as part of the recycling of solar panels, a major challenge of the years to come. In the present work, a circular recycling concept based on an iron redox shuttle was studied to leach and recover silver via electrodeposition. Different DESs were evaluated in combination with a hexahydrated iron(III) chloride oxidizing agent. Ethaline DES has gained significant interest as it can attain a high silver leaching efficiency of 99.9% on crystallized silicon cell scraps at 75 °C. The promising results led to a comprehensive study of limits of this chemical system, focusing on the relation between the concentration of species (iron and water), the interfacial potential of silver (electrochemical measurements), and surface evolution (X-ray photoelectron spectroscopy analysis). Silver leaching was determined as a mixed control mechanism involving chemical and species diffusion dependence. The concentration of iron(III) chloride appeared crucial, determining the kinetic of formation of a poorly soluble AgCl layer. Electrodeposition from leachate highlighted the need to use an oxygen-free atmosphere to produce high-quality silver. Finally, leaching at 75 °C and electrodeposition at 50 °C of silver from crystallized silicon cell scraps were demonstrated using Ethaline (1 : 2) + FeCl3·6H2O (0.12 mol L−1) under an argon atmosphere.
- 3 February 2024
- Published by Springer Nature
- p. 357-368
Electrochemical Recovery of Sb, Te, and In in Choline Chloride-Ethylene Glycol DES Electrolyte
- 3 February 2024
- Published by Springer Nature
- p. 357-368
Electrochemical Recovery of Sb, Te, and In in Choline Chloride-Ethylene Glycol DES Electrolyte
- 20 October 2023
- Published by Springer Nature
- p. 1001-1007
Sustainable Metal Production: Use of Biocarbon and the Concern of Dusting
- 20 October 2023
- Published by Springer Nature
- p. 1001-1007
Sustainable Metal Production: Use of Biocarbon and the Concern of Dusting
- 20 October 2023
- Published by Springer Nature
- p. 1009-1018
Investigations on CO2 Reactivity and Thermal Strength of Carbon Sources for Ferroalloy and Silicon Production
- 20 October 2023
- Published by Springer Nature
- p. 1009-1018
Investigations on CO2 Reactivity and Thermal Strength of Carbon Sources for Ferroalloy and Silicon Production
- 12 February 2023
- Published by Springer Nature
- p. 165-177
Biocarbon Materials in Metallurgical Processes—Investigation of Critical Properties
- 12 February 2023
- Published by Springer Nature
- p. 165-177
Biocarbon Materials in Metallurgical Processes—Investigation of Critical Properties