BYBagish Yeritsyan

Bagish Yeritsyan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bagish Yeritsyan has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Assessment of Fuel Efficiency of Power Plants of Shunting Diesel Locomotives Under Operating Cycle Conditions

    by Ye. V. Lysenko, V. S. Nemashkalo, V. P. Shaida, Ye. S. Riabov, B. Kh. Yeritsyan

    Purpose. The purpose of the article is to study the fuel efficiency of power plants of a shunting locomotive under operating cycle conditions. Methodology. An analysis of the parameters of the operating modes of the power plants of shunting diesel locomotives was carried out. It was determined that for shunting operations, the power of the diesel engine, which does not exceed 500 kW, is sufficient. For the analysis, data on the conditional operating cycle when performing shunting operations for one hour were used, which reflect the time dependence of the driver's positions being turned on. The fuel consumption of the following types of diesel locomotive power units has been examined and determined: 1) the standard power unit of the ChME3 diesel locomotive; 2) a power unit with a single Caterpillar C32 diesel engine rated at 950 kW; 3) a twin-diesel power plant with two Cummins QSM15 diesel engines, each with a power output of 500 kW; 4) a hybrid power plant comprising a Cummins QSM15 diesel engine and an energy storage system. For train operation, an estimate of the specific fuel consumption for the above-mentioned power plant options was made. Findings. It was determined that during shunting operation in a conditional hourly cycle, the fuel consumption of the ChME3 serial diesel locomotive is 39.7 kg. When operating in the same cycle of the power plant with a Caterpillar C32 diesel engine, the fuel consumption is 28.4 kg. The fuel consumption of the power plant with a Cummins QSM15 diesel engine is 25.9 kg (only one diesel engine is operating). The fuel consumption for charging the accumulator is 28.8 kg. The results obtained indicate a significant reduction in fuel consumption when using modern diesel engines, and the use of a diesel engine of reduced power ensures minimal fuel consumption. When performing train work, the lowest specific fuel consumption is achieved in a two-diesel power plant with a capacity of 160…900 kW. Originality. The feasibility of using a two-diesel power plant on shunting locomotives has been substantiated. Practical value. The results obtained can be used in the creation of power plants for shunting locomotives and other autonomous rolling stock.

  • Open Access

    Determining the optimal power rating of a diesel generator and onboard energy storage system for a hybrid locomotive power plant used in haulage operations on quarry railways

    by Ie S Riabov, B Kh Yeritsyan, O V Demydov, A S Tykhonov, O Yu Usychenko

    The paper examines the application of a hybrid power plant to locomotives performing shunting and hauling operations on quarry railways. The implementation of hybrid traction systems contributes to a reduction in diesel fuel consumption, thereby lowering CO 2 emissions and decreasing overall fuel and energy costs. The study focuses on a quarry railway line used to transport iron ore from an open-pit mine to a processing plant. A mathematical model was developed to determine the operating parameters under various locomotive operating modes. The simulation studies were carried out for train movements with both empty and loaded dump cars. The results show that the use of a hybrid power plant reduces fuel consumption during the loaded half-trip by 20.6%–30.8%, depending on the power rating of the diesel generator and the onboard energy storage system. During the empty half-trip, fuel consumption can be reduced by more than 50%. It was determined that the optimal power rating of the diesel generator is 800 kW. The minimum required power rating of the onboard energy storage system is also 800 kW. Although increasing the power rating of the energy storage system provides additional reductions in diesel fuel consumption, it results in its increased weight, larger overall dimensions, and higher cost.

  • Open Access

    Improving the Traction Properties of the Shunting Diesel Locomotives ChME3 by Distributing the Traction Force Between the Axles of the Diesel Locomotive

    by Ye. S. Riabov, B. Kh. Yeritsyan, Ye. V. Lysenko, Ye. G. Chernyshenko, A. Yu. Zhukov

    Purpose. Research into the specific determination of the influence of redistribution of traction force between axles on increasing the traction properties of the ChME3 diesel locomotive. Methodology. A mathematical model has been developed to determine the coefficient of utilization of the coupling mass of the ChME3 diesel locomotive when redistributing the tractive effort between the axles of the diesel locomotive. It is shown that as a result of the action of forces in the gear meshing of traction reducers and the action of the traction force on the automatic coupling, the unloading of the first, second, and fourth axles and the loading of the third, fifth, and sixth axles occurs in the direction of movement of the locomotive. Finding. Calculations of the coefficient of utilization of the traction mass of a diesel locomotive were carried out at different values of the coefficient of coupling and different schemes of power supply of traction electric motors. It was determined that the highest values of the coefficient of utilization of the traction mass of a locomotive are achieved in the case of individual power supply and control of traction electric motors. This method of power supply allows for the most accurate consideration of the actual axle load when redistributing the tractive effort between the axles of the locomotive. With group power supply of traction motors, in the case of combining axles with close axle coupling mass utilization coefficients, almost full utilization of coupling mass is also achieved. At the same time, the value of the coefficient of utilization of the traction mass of the diesel locomotive is stable and practically does not depend on the traction force. With by-bogie power supply and group power supply of all electric motors, the coupling mass utilization coefficient varies in the range of 0.8…0.87, with lower values being achieved at higher traction force of the diesel locomotive. Originality. The possibility of increasing the traction properties of the ChME3 diesel locomotive by redistributing traction forces between the axles of the diesel locomotive, taking into account the redistribution of the actual axle load, is substantiated. Rational options for power supply schemes for traction electric motors have been identified, which ensure a high utilization factor of the traction mass of the diesel locomotive. Practical value. The results obtained can be used in the modernization of ChME3 diesel locomotives, which allows to increase their traction properties. The proposed approach to improving traction properties can be applied to other traction rolling stock.

  • Open Access

    Determination of the rational strategy of voltage regulation of the traction induction electric motor for a shunting diesel locomotive with a group-driven wheelsets

    by Ievgen Riabov, Bagish Yeritsyan, Serhii Roi, Andrii Kachan

    Methods to enhance the energy efficiency of traction electric drives with induction motors in shunting diesel locomotives with group-driven wheelsets are examined. It is determined that increasing energy efficiency can be achieved by using the rational strategy of voltage regulation of the traction induction electric motor. The value of the voltage of the DC-link and the rational strategy of voltage regulation of the electric motor for all positions of the driver’s controller are determined using the example of the traction electric drive of the modernized diesel locomotive TGM6D-0123. The study was carried out by means of mathematical modelling, which included the calculation of losses in a traction induction motor and a semiconductor converter. According to the calculation results, it was found that the efficiency of the traction electric drive increases from 1…3% at higher positions of the driver controller and more than 15% at lower positions. The results obtained indicate the possibility of improving the energy efficiency of the traction electric drive by applying rational strategies for regulating the voltage of traction induction motors. The use of traction induction motor control strategies that ensure high energy efficiency of the locomotive traction electric drive is an effective way to create energy-efficient traction systems and can be recommended for various vehicles.


  • Open Access

    Application of a Hybrid Powertrain for the Modernisation of a Passenger Diesel‐Electric Locomotive for the Ukrainian Railway

    by Ievgen Riabov, Bagish Yeritsyan, Oleksandr Plyutin, Sergey Goolak, Sergey Maliuk

    Reducing transportation costs is important for increasing the competitiveness of railway transport. This is achieved by using technologies that reduce the consumption of fuel and energy resources. Such technologies include the use of hybrid power plants on rolling stock. The aim of the article is to determine the impact of the energy storage device, which is part of the hybrid power plant of a passenger diesel locomotive, on the consumption of fuel and energy resources and to assess the reduction in their cost under different options for using the energy storage device. The study was carried out by mathematical modelling of the movement of a train with a passenger diesel locomotive TEP70 on the Kharkiv‐Pasazhyrskyi‐Vorozhba section of the Ukrainian railways. The developed mathematical model combines the model of train movement along the section and the model of energy exchange processes in the traction system of a locomotive with an energy storage device. The paper considers the operation of the energy storage device in the energy storage mode during electrodynamic braking and in the plug‐in mode. It is established that the use of an energy storage device in the energy storage mode reduces fuel consumption by 3.7…18.5%. When using a plug‐in energy storage device, fuel consumption is reduced by 8…17%. It has been established that the use of a plug‐in energy storage device reduces the cost of fuel and energy resources by 23…40% compared to a serial diesel locomotive, and this allows it to be identified as a priority. The effective use of plug‐in hybrid traction systems requires a comprehensive approach to solving various problems related to technical, economic, environmental, organisational aspects and limitations of rolling stock and charging infrastructure.


  • Reduction of Energy Consumption by Electric Rolling Stock of Quarry Railways

    by Liliia Kondratieva, Liliia Overianova, Ievgen Riabov, Bagish Yeritsyan, Sergey Goolak


  • Open Access

    Research on the application of on-board energy storage on an electric locomotive for quarry railway transport

    by L Yu Kondratieva, L V Overianova, Ie S Riabov, B Kh Yeritsyan, S O Goolak

    Methods of using on-board energy storage system on rolling stock are considered. Their use ensures a reduction in energy consumption and reduces the impact on the environment. Concepts of managing energy flows in the traction system of an electric rolling stock equipped with onboard energy storage systems are considered. It is proposed to apply the concept of control on an electric locomotive for quarry railway transport, which consists in reducing the current consumption from the traction network during the acceleration of the rolling stock and compensating the power during movement with the lowest voltage on the current receiver. For the selected control concept, a simulation of the train movement on the test section was carried out while varying the value of the limit current consumed by the electric locomotive from the traction network. The power of the energy storage device and its working energy capacity is determined. Based on the results of the study, it is justified to limit the current consumed by the electric locomotive of the traction network at the level of 600 A.


  • Simulation model of traction electric drive of AC electric locomotive equipped with collector electric motors

    by Sergey Goolak, Ievgen Riabov, Viktor Tkachenko, Bagish Yeritsyan

    An approach to simulation modeling of traction electric drives of electric locomotives with collector engines is proposed which based on taking into account the nonlinear nature of the magnetic characteristic in electric motors, the inductances of the armature and the excitation winding of the electric motor, the nonlinearity of the volt-amperage characteristics of the rectifier unit and the features of the operation of the stage control system of the electric drive.


  • Open Access

    Justification of the Structure of the Electric Traction Drive of the Electric Locomotive for Railway Quarry Transport

    by Y. S Riabov, L. V Overianova, B. K Yeritsyan, S. O Hulak

    Purpose. The study is aimed at substantiating the structure and determining the main parameters of the traction electric drive of an electric locomotive for railway quarry transport, taking into account its modes of operation. Methodology. The research was carried out by means of mathematical modeling, which included solving the traction problem and evaluating the parameters of the energy exchange processes between the components of the traction electric drive. The simulation was carried out for the movement of the train along the track section and during shunting, which differ significantly in their mathematical description. During simulation of movement along the track section, the traction problem was solved using recommendations for traction calculations for train operation. A simplified model was developed to simulate movements during shunting. Determination of the parameters of the traction electric drive components is carried out by analyzing the processes of energy exchange in the traction electric drive based on the power balance. During the studies, it was assumed that the on-board energy storage in the traction mode feeds the traction electric motors of the booster section. In the electrodynamic braking mode, the energy accumulator stores energy from all traction electric motors of the electric locomotive. Findings. The authors obtained time dependences of the parameters that characterize the train movement at all stages of the cycle «empty half passage – loading – loaded half passage – unloading» (on the example of an electric locomotive for PJSC «Ferrexpo Poltava Mining»). The analysis of the obtained dependencies made it possible to determine the parameters of the main components of the traction electric drive for the proposed storage operation scenario. It was established that the energy capacity of the energy storage should be 250 kWh for one movement cycle. The energy storage power is 6000 kW. Originality. The authors of this paper for the first time proposed the structure of the traction electric drive of an electric locomotive for quarry railway transport, in which the electric motors of the control electric locomotive are powered from the catenary network, and the electric motors of the booster section are powered from the energy accumulator and are included in the operation at a load that exceeds 50% of the nominal one. Practical value. The practical value lies in the developed mathematical models of movement and energy exchange processes, which can be applied to the study of traction electric drives of vehicles of various purposes.


  • Open Access

    optimizing geometric parameters for the rotor of a traction synchronous reluctance motor assisted by partitioned permanent magnets

    by Borys Liubarskyi, Dmytro Iakunin, Oleh Nikonov, Dmytro Liubarskyi, Bagish Yeritsyan

    This paper considers partitioning parameters and the mutual arrangement of magnets in the rotor of the traction synchronous-jet engine with permanent partitioned magnets. The synthesis of geometrical parameters for the rotor of a synchronous reluctance motor with partitioned permanent magnets was proposed on the basis of solving the problem of conditional optimization. To solve the synthesis problem, a mathematical model has been built to determine the electromagnetic momentum of a synchronous reluctance motor with partitioned permanent magnets. It is based on the calculation of the electromagnetic momentum of the engine employing the results of a finite-element analysis of the magnetic field in the flat-parallel statement of the problem. The model is implemented in the finite-element analysis FEMM environment and makes it possible to determine the electromagnetic momentum of the engine with a variety of partitioning of permanent magnets. As an analysis problem, it is proposed to use a mathematical model of the magnetic field of the engine. The problem of conditional optimization of the rotor of a synchronous reluctance motor was stated according to the geometric criteria of the rotor. Restrictions are set on geometric, strength indicators, as well as on the level of electromagnetic momentum. The chosen optimization method is the Nelder-Mead method. Based on the results of solving the problem of synthesizing parameters for the partitioned rotor of the traction motor of trolleybus wheels, it was established that the volume of permanent magnets was reduced by 2.27 times compared to the base structure; their optimal geometric dimensions were determined (5 mm, 5.2 mm, and 5 mm), as well as the distance between them, 17.8 mm and 15.3 mm, and the engine load angle, which is 121.12 electrical degrees. Based on the results of solving the problem of synthesizing parameters for the partitioned rotor of a trolleybus traction synchronous reluctance motor, its optimal geometric parameters have been determined