Thalasseril Govindankuttykaimal Ajithkumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thalasseril Govindankuttykaimal Ajithkumar has a total of 159 co-authors. Here are the top co-authors by number of shared publications:
Chaithanya Hareendran
Central NMR Facility, and Physical/Materials Chemistry Division CSIR‐National Chemical Laboratory Pune India
6 shared publicationsAnkita Shelke
4 shared publications- Chathakudath Prabhakaran Vinod
Academy of Scientific and Innovative Research (AcSIR)
4 shared publications - Pattuparambil R. Rajamohanan
Central NMR Facility, National Chemical Laboratory, Dr Homi Bhabha Road, Pune, India
3 shared publications - Ankita Shelke2 shared publications
- Chinnakonda Subramanian Gopinath
Department of Chemistry, Indian Institute of Technology Palakkad, Kanjikode, Palakkad 678623, Kerala, India
2 shared publications
Latest Publications
- 31 August 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (42)
Thermosalient Effect in an Organic Salt Crystal Induced by Moiety Twisting
Molecular flexibility offers a powerful means to generate stimuli‐responsive dynamic crystals. This study reports temperature‐induced reversible dynamic properties of an organic salt crystal containing a conformationally flexible homopiperizine ( HPZ ) molecule. The salt crystals exhibit thermosalient properties, such as jumping, hopping, and fragmentation, followed by a phase transformation. Generally, the mechanism of thermosalient properties has been rationalized by anisotropic thermal expansion and phase transformation. In this study, the mechanism of the dynamic properties of the crystal has been elucidated by variable‐temperature single‐crystal x‐ray diffraction (VT‐SCXRD), which reveals twisting of HPZ resulting in generating strain in the crystal. Further, the dynamic behavior of HPZ has been observed by variable temperature solid state 13 C CP‐MAS NMR studies. The NMR spectrum revealed that in the absence of dynamicity of the crystals at room temperature and below to it, all peaks corresponding to carbon atoms were well resolved. However, merging of some of the peaks corresponding to HPZ moiety confirmed the dynamic effect manifested by salient behavior.
- 31 August 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (42)
Thermosalient Effect in an Organic Salt Crystal Induced by Moiety Twisting
Molecular flexibility offers a powerful means to generate stimuli‐responsive dynamic crystals. This study reports temperature‐induced reversible dynamic properties of an organic salt crystal containing a conformationally flexible homopiperizine ( HPZ ) molecule. The salt crystals exhibit thermosalient properties, such as jumping, hopping, and fragmentation, followed by a phase transformation. Generally, the mechanism of thermosalient properties has been rationalized by anisotropic thermal expansion and phase transformation. In this study, the mechanism of the dynamic properties of the crystal has been elucidated by variable‐temperature single‐crystal x‐ray diffraction (VT‐SCXRD), which reveals twisting of HPZ resulting in generating strain in the crystal. Further, the dynamic behavior of HPZ has been observed by variable temperature solid state 13 C CP‐MAS NMR studies. The NMR spectrum revealed that in the absence of dynamicity of the crystals at room temperature and below to it, all peaks corresponding to carbon atoms were well resolved. However, merging of some of the peaks corresponding to HPZ moiety confirmed the dynamic effect manifested by salient behavior.
- 6 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (20) , 7069-7078
Insights into the Structure and Electrochemical Properties of Ti 3 C 2 T x MXene from Solid-State NMR
- 6 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (20) , 7069-7078
Insights into the Structure and Electrochemical Properties of Ti 3 C 2 T x MXene from Solid-State NMR
- 21 April 2026
- Published by Wiley in Magnetic Resonance in Chemistry
Distinguishing Hydrogen Bonding in Structurally Similar Pharmaceutical Compounds With 1 H‐ 14 N HMQC MAS NMR at 100 kHz
Solid‐state NMR experiments provide valuable insights into the structure of pharmaceutical compounds, many of which contain nitrogen. Recent literature indicates that the indirect detection of 14 N offers significant advantages for structural analysis, particularly when using two‐dimensional 1 H‐ 14 N HMQC experiments. The advantage of these experiments is that they allow us to rapidly collect information about the hydrogen bonding interaction with a minimal amount of the compound. In our study, we have carried out 1 H‐ 14 N HMQC experiments on structurally similar pharmaceutical compounds sorafenib and regorafenib monohydrate to explore the hydrogen bonding interactions and differentiate different nitrogen signals which are difficult to obtain using 15 N solid‐state NMR experiments on unlabeled compounds. Our findings enable us to distinguish between intramolecular and intermolecular hydrogen bonding interactions and identify different nitrogen atoms in their structures. Thus, our results show that the 1 H‐ 14 N HQMC experiments provide a rapid and effective method for distinguishing different hydrogen bonding interactions.
- 21 April 2026
- Published by Wiley in Magnetic Resonance in Chemistry
Distinguishing Hydrogen Bonding in Structurally Similar Pharmaceutical Compounds With 1 H‐ 14 N HMQC MAS NMR at 100 kHz
Solid‐state NMR experiments provide valuable insights into the structure of pharmaceutical compounds, many of which contain nitrogen. Recent literature indicates that the indirect detection of 14 N offers significant advantages for structural analysis, particularly when using two‐dimensional 1 H‐ 14 N HMQC experiments. The advantage of these experiments is that they allow us to rapidly collect information about the hydrogen bonding interaction with a minimal amount of the compound. In our study, we have carried out 1 H‐ 14 N HMQC experiments on structurally similar pharmaceutical compounds sorafenib and regorafenib monohydrate to explore the hydrogen bonding interactions and differentiate different nitrogen signals which are difficult to obtain using 15 N solid‐state NMR experiments on unlabeled compounds. Our findings enable us to distinguish between intramolecular and intermolecular hydrogen bonding interactions and identify different nitrogen atoms in their structures. Thus, our results show that the 1 H‐ 14 N HQMC experiments provide a rapid and effective method for distinguishing different hydrogen bonding interactions.
- 24 March 2026
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 49 (2)
Fly-ash-based geopolymers: leachability and solid-state NMR investigations
- 24 March 2026
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 49 (2)
Fly-ash-based geopolymers: leachability and solid-state NMR investigations
- Open Access
- 18 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (8) , 13253-13267
Sustainable Nanocellulose Extraction from Salacca zalacca Peel Using Chlorine-Free and Low-Acid Treatments
Conversion of agro-waste to value-added products is one of the important principles of a green circular economy. A novel sustainable technique has been reported by using chlorine-free extraction of cellulose nanofibers (CNFs) from the peels of Salacca zalacca, a common fruit found in Asia. The fruit peels were exposed to alkali treatment using 2% NaOH (60 °C, 2 h), chlorine-free bleaching using 15% hydrogen peroxide (60 °C, 2 h), and sulfuric acid hydrolysis (15% v/v) for the extraction of CNFs. Various analytical methods were employed to characterize the prepared CNFs. The Fourier transform infrared spectroscopy (FTIR) and 13C solid state nuclear magnetic resonance (NMR) spectra showed the complete elimination of lignin and hemicellulose in the prepared CNFs. The elemental composition and high purity of CNFs were further verified by energy-dispersive X-ray analysis (EDX). The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images proved the fibrous morphology of the prepared CNFs, and the diameters of the cellulose nanofibers were found to be 15–30 nm. The X-ray diffraction (XRD) studies disclosed the type-I cellulosic structure in the prepared CNFs with a high crystallinity index (73%). The thermogravimetric analysis (TGA) demonstrated the superior thermal stability of the prepared CNFs (Tmax is 350 °C) compared to the raw fiber (Tmax is 320 °C). Based on the obtained results, it has been explored that the extracted highly pure CNFs can be used for fabricating bionanocomposites for high performance applications, including food packaging, sensors, water treatment, green tires, etc.
- 18 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (8) , 13253-13267
Open AccessSustainable Nanocellulose Extraction from Salacca zalacca Peel Using Chlorine-Free and Low-Acid Treatments
Conversion of agro-waste to value-added products is one of the important principles of a green circular economy. A novel sustainable technique has been reported by using chlorine-free extraction of cellulose nanofibers (CNFs) from the peels of Salacca zalacca, a common fruit found in Asia. The fruit peels were exposed to alkali treatment using 2% NaOH (60 °C, 2 h), chlorine-free bleaching using 15% hydrogen peroxide (60 °C, 2 h), and sulfuric acid hydrolysis (15% v/v) for the extraction of CNFs. Various analytical methods were employed to characterize the prepared CNFs. The Fourier transform infrared spectroscopy (FTIR) and 13C solid state nuclear magnetic resonance (NMR) spectra showed the complete elimination of lignin and hemicellulose in the prepared CNFs. The elemental composition and high purity of CNFs were further verified by energy-dispersive X-ray analysis (EDX). The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images proved the fibrous morphology of the prepared CNFs, and the diameters of the cellulose nanofibers were found to be 15–30 nm. The X-ray diffraction (XRD) studies disclosed the type-I cellulosic structure in the prepared CNFs with a high crystallinity index (73%). The thermogravimetric analysis (TGA) demonstrated the superior thermal stability of the prepared CNFs (Tmax is 350 °C) compared to the raw fiber (Tmax is 320 °C). Based on the obtained results, it has been explored that the extracted highly pure CNFs can be used for fabricating bionanocomposites for high performance applications, including food packaging, sensors, water treatment, green tires, etc.
- 11 February 2026
- Published by Elsevier in Molecular Catalysis
- Vol. 593
Effect of sulfonation density on acid strength in ion exchange resins: Insights from solid-state NMR and density functional theory
- 11 February 2026
- Published by Elsevier in Molecular Catalysis
- Vol. 593
Effect of sulfonation density on acid strength in ion exchange resins: Insights from solid-state NMR and density functional theory
- 2 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (28) , 7349-7360
Insights into the Chemical Durability and Structure of ZnO-Incorporated Sodium Borosilicate Glasses from Solid-State NMR
ZnO-incorporated NBS glasses have been studied for their application as a matrix for nuclear waste immobilization. However, structural factors affecting chemical durability have not been established. In this study, the structural changes in NBSZn glasses across various Na2O/(B2O3 + ZnO) ratios are explored using multinuclear MAS, MQMAS NMR, and EXAFS techniques. The Na MAS and MQMAS studies reveal remarkable changes in the Na environment after ZnO incorporation, which leads to an increase in chemical durability. Based on the results from NMR and EXAFS, we rationalized the structure of this glass in terms of the modified random network (MRN) model. The glass network comprises a highly polymerized region and alkali percolation channels bordered by nonbridging oxygens from the depolymerized regions. The constriction of these percolation channels increases the chemical durability of the glass. Our findings will help in the advancement of Zn-containing NBS glasses as a promising matrix for nuclear waste immobilization.
- 2 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (28) , 7349-7360
Insights into the Chemical Durability and Structure of ZnO-Incorporated Sodium Borosilicate Glasses from Solid-State NMR
ZnO-incorporated NBS glasses have been studied for their application as a matrix for nuclear waste immobilization. However, structural factors affecting chemical durability have not been established. In this study, the structural changes in NBSZn glasses across various Na2O/(B2O3 + ZnO) ratios are explored using multinuclear MAS, MQMAS NMR, and EXAFS techniques. The Na MAS and MQMAS studies reveal remarkable changes in the Na environment after ZnO incorporation, which leads to an increase in chemical durability. Based on the results from NMR and EXAFS, we rationalized the structure of this glass in terms of the modified random network (MRN) model. The glass network comprises a highly polymerized region and alkali percolation channels bordered by nonbridging oxygens from the depolymerized regions. The constriction of these percolation channels increases the chemical durability of the glass. Our findings will help in the advancement of Zn-containing NBS glasses as a promising matrix for nuclear waste immobilization.
- Open Access
- 8 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Insights into the Structure and Electrochemical Properties of Ti3C2Tx MXene from Solid-State NMR
Ever since their discovery in 2011, MXenes have gained popularity in energy storage devices. Their far-reaching properties arise mainly due to surface terminations and interlayer species like hydrated cations and water. The nature of these species remains a subject of study due to the complex surface functionalization during synthesis. X-ray diffraction studies have shown that certain intercalants such as hydrated cations increase the interlayer spacing leading to enhanced electrochemical performance. However, the structural and chemical modification of these intercalants during the charge-discharge cycles of asymmetric supercapacitors are yet to be investigated. Analysis of the complex chemistry of Ti3C2Tx requires a specialized tool that can provide insights into its nuanced structural changes and link them to its behavior. In this study, we demonstrate the versatility of solid-state NMR (SSNMR), for the characterization of surface terminations and intercalants in the Ti3C2Tx MXene prepared using sodium salts, and correlate its structure to its performance by ex situ SSNMR analysis. Our experiments demonstrate the progressive oxidation of surface Ti–OH and also the significance of the intercalated hydrated cation shells during electrochemical cycling. In addition to this, we have also employed 23Na MAS SSNMR to establish the conversion of sodium hexahydrate to sodium peroxides after 10 charge-discharge cycles.
- 8 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInsights into the Structure and Electrochemical Properties of Ti3C2Tx MXene from Solid-State NMR
Ever since their discovery in 2011, MXenes have gained popularity in energy storage devices. Their far-reaching properties arise mainly due to surface terminations and interlayer species like hydrated cations and water. The nature of these species remains a subject of study due to the complex surface functionalization during synthesis. X-ray diffraction studies have shown that certain intercalants such as hydrated cations increase the interlayer spacing leading to enhanced electrochemical performance. However, the structural and chemical modification of these intercalants during the charge-discharge cycles of asymmetric supercapacitors are yet to be investigated. Analysis of the complex chemistry of Ti3C2Tx requires a specialized tool that can provide insights into its nuanced structural changes and link them to its behavior. In this study, we demonstrate the versatility of solid-state NMR (SSNMR), for the characterization of surface terminations and intercalants in the Ti3C2Tx MXene prepared using sodium salts, and correlate its structure to its performance by ex situ SSNMR analysis. Our experiments demonstrate the progressive oxidation of surface Ti–OH and also the significance of the intercalated hydrated cation shells during electrochemical cycling. In addition to this, we have also employed 23Na MAS SSNMR to establish the conversion of sodium hexahydrate to sodium peroxides after 10 charge-discharge cycles.