Zhenwei Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhenwei Dai has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
Qihui Xiong
Chongqing Bureau of Geology and Mineral Resources Exploration and Development Nanjiang Hydrogerlogy Engineering Geology Team, Chongqing, China
5 shared publicationsAnle Zhang
Wuhan Center, China Geological Survey (Geosciences Innovation Center of Central South China), Wuhan, Hubei, China
4 shared publicationsShi Cheng
College of Civil Engineering & Architecture, China Three Gorges University, Yichang, China
4 shared publicationsXingxing Zhao
College of Civil Engineering & Architecture, China Three Gorges University, Yichang, China
3 shared publications- Bolin Huang
Hubei Key Laboratory of Disaster Prevention and Mitigation, China Three Gorges University, Yichang, China
2 shared publications Chenyang Zhang
Faculty of Engineering, China University of Geosciences, Wuhan, China
2 shared publications
Latest Publications
- Open Access
- 21 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Dynamic rockfall risk assessment using multi-source data fusion and 3D simulation: a case study of Jiaohua rock
Rockfall represents a sudden and highly destructive geological hazard, posing significant risks to mountainous communities and infrastructure. This study presents an integrated dynamic risk assessment for the Jiaohua perilous rock zone in Kaizhou District, Chongqing, China, by fusing multi-source data including field investigation, UAV photogrammetry, and 3D numerical simulation. Kinematic analysis identified a critical slope angle of 57° for rockfall initiation, enabling the classification of two primary susceptibility zones. High-precision 3D simulations using RAMMS: ROCKFALL were conducted on six identified hazardous rock masses (#WY1–#WY6). The simulations delineated two distinct rockfall mechanisms: #WY1–#WY3 sources generate high-energy, short-duration impacts, achieving kinetic energies up to 1.88 × 10⁴ kJ within 10–15 s, posing a direct threat to the residential area below. Conversely, rockfalls from #WY4–#WY6 involve longer travel paths with considerable energy attenuation, yet residual kinetic energy remains capable of causing zonal damage. The simulated kinetic energies were translated into quantitative impact force estimates, forming the basis for differentiated mitigation strategies. These include active reinforcement and high-strength interception for short-range, high-energy events, and multi-level buffering with trajectory control for long-runout cases. This integrated methodology offers a scientifically grounded framework for precise hazard prevention and serves as a valuable reference for rockfall risk management in analogous geological settings, particularly within the Three Gorges Reservoir area.
- 21 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessDynamic rockfall risk assessment using multi-source data fusion and 3D simulation: a case study of Jiaohua rock
Rockfall represents a sudden and highly destructive geological hazard, posing significant risks to mountainous communities and infrastructure. This study presents an integrated dynamic risk assessment for the Jiaohua perilous rock zone in Kaizhou District, Chongqing, China, by fusing multi-source data including field investigation, UAV photogrammetry, and 3D numerical simulation. Kinematic analysis identified a critical slope angle of 57° for rockfall initiation, enabling the classification of two primary susceptibility zones. High-precision 3D simulations using RAMMS: ROCKFALL were conducted on six identified hazardous rock masses (#WY1–#WY6). The simulations delineated two distinct rockfall mechanisms: #WY1–#WY3 sources generate high-energy, short-duration impacts, achieving kinetic energies up to 1.88 × 10⁴ kJ within 10–15 s, posing a direct threat to the residential area below. Conversely, rockfalls from #WY4–#WY6 involve longer travel paths with considerable energy attenuation, yet residual kinetic energy remains capable of causing zonal damage. The simulated kinetic energies were translated into quantitative impact force estimates, forming the basis for differentiated mitigation strategies. These include active reinforcement and high-strength interception for short-range, high-energy events, and multi-level buffering with trajectory control for long-runout cases. This integrated methodology offers a scientifically grounded framework for precise hazard prevention and serves as a valuable reference for rockfall risk management in analogous geological settings, particularly within the Three Gorges Reservoir area.
- Open Access
- 30 October 2025
- Published by Springer Nature in Research Square
Dynamic Rockfall Risk Assessment Using Multi-Source Data Fusion and 3D Simulation: A Case Study of Jiaohua Rock
Rockfall represents a sudden and highly destructive geological hazard, posing significant risks to mountainous communities and infrastructure. This study presents an integrated dynamic risk assessment for the Jiaohua perilous rock zone in Kaizhou District, Chongqing, China, by fusing multi-source data including field investigation, UAV photogrammetry, and 3D numerical simulation. Kinematic analysis identified a critical slope angle of 57° for rockfall initiation, enabling the classification of two primary susceptibility zones. High-precision 3D simulations using RAMMS:ROCKFALL were conducted on six identified hazardous rock masses (#WY1–#WY6). The simulations delineated two distinct rockfall mechanisms: #WY1–#WY3 sources generate high-energy, short-duration impacts, achieving kinetic energies up to 1.88×10⁴ kJ within 10–15 seconds, posing a direct threat to the residential area below. Conversely, rockfalls from #WY4–#WY6 involve longer travel paths with considerable energy attenuation, yet residual kinetic energy remains capable of causing zonal damage. The simulated kinetic energies were translated into quantitative impact force estimates, forming the basis for differentiated mitigation strategies. These include active reinforcement and high-strength interception for short-range, high-energy events, and multi-level buffering with trajectory control for long-runout cases. This integrated methodology offers a scientifically grounded framework for precise hazard prevention and serves as a valuable reference for rockfall risk management in analogous geological settings, particularly within the Three Gorges Reservoir area.
- 30 October 2025
- Published by Springer Nature in Research Square
Open AccessDynamic Rockfall Risk Assessment Using Multi-Source Data Fusion and 3D Simulation: A Case Study of Jiaohua Rock
Rockfall represents a sudden and highly destructive geological hazard, posing significant risks to mountainous communities and infrastructure. This study presents an integrated dynamic risk assessment for the Jiaohua perilous rock zone in Kaizhou District, Chongqing, China, by fusing multi-source data including field investigation, UAV photogrammetry, and 3D numerical simulation. Kinematic analysis identified a critical slope angle of 57° for rockfall initiation, enabling the classification of two primary susceptibility zones. High-precision 3D simulations using RAMMS:ROCKFALL were conducted on six identified hazardous rock masses (#WY1–#WY6). The simulations delineated two distinct rockfall mechanisms: #WY1–#WY3 sources generate high-energy, short-duration impacts, achieving kinetic energies up to 1.88×10⁴ kJ within 10–15 seconds, posing a direct threat to the residential area below. Conversely, rockfalls from #WY4–#WY6 involve longer travel paths with considerable energy attenuation, yet residual kinetic energy remains capable of causing zonal damage. The simulated kinetic energies were translated into quantitative impact force estimates, forming the basis for differentiated mitigation strategies. These include active reinforcement and high-strength interception for short-range, high-energy events, and multi-level buffering with trajectory control for long-runout cases. This integrated methodology offers a scientifically grounded framework for precise hazard prevention and serves as a valuable reference for rockfall risk management in analogous geological settings, particularly within the Three Gorges Reservoir area.
- Open Access
- 6 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Deformation characteristics and motion process prediction analysis of the Lanbazi landslide in Wanzhou District, Chongqing
The Lanbazi landslide, a typical reservoir landslide in the Three Gorges Reservoir, has exhibited significant and increasing deformation over the past two years, posing a severe threat to the safety of nearby residents’ lives and property. This study employed a combination of field investigation, engineering geological survey, SBAS-InSAR interpretation, and RAMMS numerical simulation to predict and analyze the spatial and temporal evolution of landslide deformation and the instability movement of the Lanbazi landslide. The results suggest that the deformation rate of the landslide ranges from − 73.5 mm/a to 24.7 mm/a from January 2022 to December 2024, and the deformation of the middle and rear edge of the landslide is the largest and the movement rate is the most significant. The RAMMS software is used to calculate the movement process of the secondary potential landslide instability area. The total time from the start to the end of the landslide is 275 s, the maximum movement speed is 25.2 m/s, the maximum movement accumulation height is 31 m, the maximum impact force is 1265.2 kPa, and the landslide accumulation body will eventually flow into the Yangtze River, which will produce a surge of up to 11.7 m. This study innovatively combines SBAS-InSAR and RAMMS numerical simulation technology to realize the collaborative analysis of landslide deformation monitoring and instability motion prediction. This method breaks through the separation problem of deformation analysis and disaster prediction in traditional research.
- 6 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Open AccessDeformation characteristics and motion process prediction analysis of the Lanbazi landslide in Wanzhou District, Chongqing
The Lanbazi landslide, a typical reservoir landslide in the Three Gorges Reservoir, has exhibited significant and increasing deformation over the past two years, posing a severe threat to the safety of nearby residents’ lives and property. This study employed a combination of field investigation, engineering geological survey, SBAS-InSAR interpretation, and RAMMS numerical simulation to predict and analyze the spatial and temporal evolution of landslide deformation and the instability movement of the Lanbazi landslide. The results suggest that the deformation rate of the landslide ranges from − 73.5 mm/a to 24.7 mm/a from January 2022 to December 2024, and the deformation of the middle and rear edge of the landslide is the largest and the movement rate is the most significant. The RAMMS software is used to calculate the movement process of the secondary potential landslide instability area. The total time from the start to the end of the landslide is 275 s, the maximum movement speed is 25.2 m/s, the maximum movement accumulation height is 31 m, the maximum impact force is 1265.2 kPa, and the landslide accumulation body will eventually flow into the Yangtze River, which will produce a surge of up to 11.7 m. This study innovatively combines SBAS-InSAR and RAMMS numerical simulation technology to realize the collaborative analysis of landslide deformation monitoring and instability motion prediction. This method breaks through the separation problem of deformation analysis and disaster prediction in traditional research.
- Open Access
Analysis of the Characteristics and Influencing Factors of Carbon and Water Fluxes in the Restored Sites of Puding, Guizhou Province
This study investigates the microclimate characteristics and temporal variations in carbon and water fluxes in the naturally restored plots in Puding County, Anshun City, Guizhou Province. Continuous monitoring and collection of environmental factors through the eddy covariance system reveals the dynamic change patterns of the microclimate environment in the early stages of returning farmland to forest and the dynamic characteristics of carbon and water fluxes in the ecosystem. The results show that the study area exhibits a pronounced carbon sink capacity at the annual scale. The net ecosystem exchange (NEE) gradually increased with the extension of the recovery time, and the carbon sink intensity reached its peak during the growing season (June–August). The water use efficiency (WUE) was significantly higher in the growing season compared to the non-growing season, indicating that the WUE and carbon sequestration capacity increased simultaneously. Structural equation model (SEM) analysis revealed that latent heat flux has the most significant regulatory effect on carbon sink function. Furthermore, temperature, relative humidity, and latent heat flux have a significant positive regulatory effect on NEE (p < 0.001), while rain and soil heat flux affect carbon sink function through an indirect path. By constructing a complex meteorological carbon flux relationship network, the main regulatory mechanism of the ecosystem carbon sink in the Puding area was revealed. These findings confirm that the implementation of returning farmland to forest has effectively enhanced the carbon sequestration capacity of karst ecosystems.
Open AccessAnalysis of the Characteristics and Influencing Factors of Carbon and Water Fluxes in the Restored Sites of Puding, Guizhou Province
This study investigates the microclimate characteristics and temporal variations in carbon and water fluxes in the naturally restored plots in Puding County, Anshun City, Guizhou Province. Continuous monitoring and collection of environmental factors through the eddy covariance system reveals the dynamic change patterns of the microclimate environment in the early stages of returning farmland to forest and the dynamic characteristics of carbon and water fluxes in the ecosystem. The results show that the study area exhibits a pronounced carbon sink capacity at the annual scale. The net ecosystem exchange (NEE) gradually increased with the extension of the recovery time, and the carbon sink intensity reached its peak during the growing season (June–August). The water use efficiency (WUE) was significantly higher in the growing season compared to the non-growing season, indicating that the WUE and carbon sequestration capacity increased simultaneously. Structural equation model (SEM) analysis revealed that latent heat flux has the most significant regulatory effect on carbon sink function. Furthermore, temperature, relative humidity, and latent heat flux have a significant positive regulatory effect on NEE (p < 0.001), while rain and soil heat flux affect carbon sink function through an indirect path. By constructing a complex meteorological carbon flux relationship network, the main regulatory mechanism of the ecosystem carbon sink in the Puding area was revealed. These findings confirm that the implementation of returning farmland to forest has effectively enhanced the carbon sequestration capacity of karst ecosystems.
- Open Access
Deformation and Failure Mechanism of Bedding Rock Landslides Based on Stability Analysis and Kinematics Characteristics: A Case Study of the Xing’an Village Landslide, Chongqing
Bedding rock landslides, characterized by their distinct geological structure, are widely distributed and highly susceptible to sliding under external disturbances, resulting in catastrophic events. This study aims to unravel the geomechanical mechanisms governing rainfall-induced instability through an integrated investigation of a representative landslide in Xing’an Village, Chongqing. Employing multidisciplinary approaches, including field monitoring, geotechnical testing, and dynamic numerical modeling, we systematically revealed two critical failure zones: a front failure zone and a rear potential instability zone. Under rainstorm conditions, the safety factor for both zones was 1.02, indicating a marginally unstable state. The DAN-W simulations indicate that the potential instability zone at the rear of the landslide experienced complete failure within 12 s under heavy rainfall, with a maximum run-out distance of 20 m, a maximum velocity of 4.32 m/s, and a maximum deposition thickness of 8.3 m, which could potentially bury the buildings at the toe of the landslide. The low strength and permeability of the mudstone-dominated Badong Formation, characterized by interbedded mudstone, siltstone, and sandstone within the Middle Triassic geological system, provides a fundamental prerequisite for the landslide. Rainwater infiltration into the mudstone layers degraded its mechanical properties, and excavation at the slope base ultimately triggered the landslide initiation. These findings can provide theoretical support for preventing and managing similar bedding rock landslides with similar geological backgrounds.
Open AccessDeformation and Failure Mechanism of Bedding Rock Landslides Based on Stability Analysis and Kinematics Characteristics: A Case Study of the Xing’an Village Landslide, Chongqing
Bedding rock landslides, characterized by their distinct geological structure, are widely distributed and highly susceptible to sliding under external disturbances, resulting in catastrophic events. This study aims to unravel the geomechanical mechanisms governing rainfall-induced instability through an integrated investigation of a representative landslide in Xing’an Village, Chongqing. Employing multidisciplinary approaches, including field monitoring, geotechnical testing, and dynamic numerical modeling, we systematically revealed two critical failure zones: a front failure zone and a rear potential instability zone. Under rainstorm conditions, the safety factor for both zones was 1.02, indicating a marginally unstable state. The DAN-W simulations indicate that the potential instability zone at the rear of the landslide experienced complete failure within 12 s under heavy rainfall, with a maximum run-out distance of 20 m, a maximum velocity of 4.32 m/s, and a maximum deposition thickness of 8.3 m, which could potentially bury the buildings at the toe of the landslide. The low strength and permeability of the mudstone-dominated Badong Formation, characterized by interbedded mudstone, siltstone, and sandstone within the Middle Triassic geological system, provides a fundamental prerequisite for the landslide. Rainwater infiltration into the mudstone layers degraded its mechanical properties, and excavation at the slope base ultimately triggered the landslide initiation. These findings can provide theoretical support for preventing and managing similar bedding rock landslides with similar geological backgrounds.
- Open Access
- 6 December 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (23) , 10714
Failure Mechanism and Risk Assessment of Multi-Level Cliff in Jiaohua Perilous Rock Mass
Perilous rock mass disasters are typical forms of collapse disasters. Perilous rock masses are widely distributed in mountainous areas around the world and often pose a great threat to residents and line engineering. The correct evaluation of the stability and disaster-causing ability of perilous rock is important for the guarantee of sustainable development for human beings living in mountainous areas. The dynamic disaster effects of perilous rock collapse have always been a hot topic in the field of engineering geological disaster research. This study takes typical #WY8 and #WY47 perilous rock masses in a zone called the Jiaohua rock perilous rock zone in Chongqing, China, as a case study. The Jiaohua perilous rock mass is located in the Kaizhou District of the Three Gorges Reservoir area in China, which is mainly distributed in a ‘long strip’. The initial deformation and collapse of the perilous rock zone occurred in September 2004, and many local collapses have occurred since. In this study, the basic characteristics of the perilous rock belt of Jiaohua rock were first analyzed, and the failure mechanism of the perilous rock mass of Jiaohua rock was then summarized. Then, a numerical model of the perilous rock mass was established by DAN-W, and the disaster process of perilous rock collapse was analyzed. According to the characteristics of perilous rock and cliffs, considering the collapse partition, the collapse path of debris flow can be divided into three sections: the collapse section, slip section, and accumulation section. The calculation results show that the maximum velocity of the front edge of the #WY8 debris flow is 27.26 m/s, the maximum velocity of the trailing edge is 16.71 m/s, the maximum sliding distance is 437 m, and the impact force of the debris flow on the building is up to 52.29 kPa. The maximum velocity of the front edge of the #WY47 debris flow is 31.05 m/s, the maximum velocity of the trailing edge is 21.99 m/s, the maximum sliding distance is 194.31 m, and the impact force of the debris flow on the building is 241.15 kPa. Civil buildings within the scope of collapse are at risk of being completely destroyed. The research results of this study provide a certain theoretical basis for disaster prevention and mitigation work in the hidden danger area of rock avalanche disasters in the Three Gorges Reservoir area.
- 6 December 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (23) , 10714
Open AccessFailure Mechanism and Risk Assessment of Multi-Level Cliff in Jiaohua Perilous Rock Mass
Perilous rock mass disasters are typical forms of collapse disasters. Perilous rock masses are widely distributed in mountainous areas around the world and often pose a great threat to residents and line engineering. The correct evaluation of the stability and disaster-causing ability of perilous rock is important for the guarantee of sustainable development for human beings living in mountainous areas. The dynamic disaster effects of perilous rock collapse have always been a hot topic in the field of engineering geological disaster research. This study takes typical #WY8 and #WY47 perilous rock masses in a zone called the Jiaohua rock perilous rock zone in Chongqing, China, as a case study. The Jiaohua perilous rock mass is located in the Kaizhou District of the Three Gorges Reservoir area in China, which is mainly distributed in a ‘long strip’. The initial deformation and collapse of the perilous rock zone occurred in September 2004, and many local collapses have occurred since. In this study, the basic characteristics of the perilous rock belt of Jiaohua rock were first analyzed, and the failure mechanism of the perilous rock mass of Jiaohua rock was then summarized. Then, a numerical model of the perilous rock mass was established by DAN-W, and the disaster process of perilous rock collapse was analyzed. According to the characteristics of perilous rock and cliffs, considering the collapse partition, the collapse path of debris flow can be divided into three sections: the collapse section, slip section, and accumulation section. The calculation results show that the maximum velocity of the front edge of the #WY8 debris flow is 27.26 m/s, the maximum velocity of the trailing edge is 16.71 m/s, the maximum sliding distance is 437 m, and the impact force of the debris flow on the building is up to 52.29 kPa. The maximum velocity of the front edge of the #WY47 debris flow is 31.05 m/s, the maximum velocity of the trailing edge is 21.99 m/s, the maximum sliding distance is 194.31 m, and the impact force of the debris flow on the building is 241.15 kPa. Civil buildings within the scope of collapse are at risk of being completely destroyed. The research results of this study provide a certain theoretical basis for disaster prevention and mitigation work in the hidden danger area of rock avalanche disasters in the Three Gorges Reservoir area.
- Open Access
- 4 December 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1497757
Risk assessment of potential rock collapse in Fenghuang Mountain, three gorges reservoir area, China
On 8 October 2017, persistent heavy rainfall triggered a rock collapse on Fenghuang Mountain in Wuxi Town, located within the Three Gorges Reservoir region of China. Subsequent field investigations and monitoring identified several potentially unstable rock masses in the area, posing a significant threat to the safety of nearby residents and their property. In this study,the Rapid Mass Movement Simulation (RAMMS) numerical tool was used to perform a back analysis of the rock collapse event. The well calibrated numerical model was then used to assess the risk of the potential unstable rock masses in the study area. The rock collapse on Fenghuang Mountain descended rapidly along the slope, with the dislodged material accumulating at the base and obstructing the road at the foot of the slope. Some debris breached the embankment and entered the Daning River. The computed maximum velocity during the rock collapse event was approximately 9.14 m/s, with an average maximum deposit thickness of around 4.48 m. The back-analysis of the rock collapse event closely aligns with the observed failure process and deposit morphology documented through field investigation. Using the well calibrated numerical model, a dynamic analysis was conducted on the potential unstable rock mass. The risk assessment indicates that the potential unstable rock mass is prone to instability, with a high likelihood of a subsequent rockfall under extreme rainfall conditions. The computed average maximum velocity for the potential rockfall is 33.83 m/s, with an average maximum deposit thickness of 2.20 m. The computed maximum impact pressure is about 164 kPa, which would result in significant damage to the road below. Additionally, a maximum wave height of 1.38 m from the surge caused by potential rockfall entering the Daning River was calculated by a semi-empirical model. This research offers a novel approach and methodology for assessing the risk of such hazardous events in similar geological setting globally.
- 4 December 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1497757
Open AccessRisk assessment of potential rock collapse in Fenghuang Mountain, three gorges reservoir area, China
On 8 October 2017, persistent heavy rainfall triggered a rock collapse on Fenghuang Mountain in Wuxi Town, located within the Three Gorges Reservoir region of China. Subsequent field investigations and monitoring identified several potentially unstable rock masses in the area, posing a significant threat to the safety of nearby residents and their property. In this study,the Rapid Mass Movement Simulation (RAMMS) numerical tool was used to perform a back analysis of the rock collapse event. The well calibrated numerical model was then used to assess the risk of the potential unstable rock masses in the study area. The rock collapse on Fenghuang Mountain descended rapidly along the slope, with the dislodged material accumulating at the base and obstructing the road at the foot of the slope. Some debris breached the embankment and entered the Daning River. The computed maximum velocity during the rock collapse event was approximately 9.14 m/s, with an average maximum deposit thickness of around 4.48 m. The back-analysis of the rock collapse event closely aligns with the observed failure process and deposit morphology documented through field investigation. Using the well calibrated numerical model, a dynamic analysis was conducted on the potential unstable rock mass. The risk assessment indicates that the potential unstable rock mass is prone to instability, with a high likelihood of a subsequent rockfall under extreme rainfall conditions. The computed average maximum velocity for the potential rockfall is 33.83 m/s, with an average maximum deposit thickness of 2.20 m. The computed maximum impact pressure is about 164 kPa, which would result in significant damage to the road below. Additionally, a maximum wave height of 1.38 m from the surge caused by potential rockfall entering the Daning River was calculated by a semi-empirical model. This research offers a novel approach and methodology for assessing the risk of such hazardous events in similar geological setting globally.
- Open Access
- 14 November 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1478252
Failure mechanism and dynamic process of landslide triggered debris flows—an example from Chongqing, China
Shallow landslides and debris flows triggered by heavy rainfall are widespread catastrophic geological disasters in mountainous areas. Landslides with complex terrain are often the material source of debris flows as a disaster chain. However, the failure mechanism and dynamic process of landslide triggered debris flow are still not clear. In July 2023, an obvious rockslide occurred during heavy rainfall in Changtan Town, Chongqing City, Southwest China, resulting in one death and seven houses collapsed. In this paper, back analysis in the dynamic process of the Yanghuachi (YHC) landslide triggered debris flow is carried out by the coupled particle flow model and elastic viscoplastic model. The reults indicate that the sliding body moves downward along the sliding surface, pushing the loose deposits at the lower part of the landslide to slip and then extending along the gully to the right bank of the Modao River. The overall movement duration of the landslide in the study area is approximately 180 s, with a maximum sliding velocity of about 22.08 m/s and a final deposition thickness of approximately 10.91 m. This study provides a methodology for analyzing the dynamic process of landslide triggered debris flows.
- 14 November 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1478252
Open AccessFailure mechanism and dynamic process of landslide triggered debris flows—an example from Chongqing, China
Shallow landslides and debris flows triggered by heavy rainfall are widespread catastrophic geological disasters in mountainous areas. Landslides with complex terrain are often the material source of debris flows as a disaster chain. However, the failure mechanism and dynamic process of landslide triggered debris flow are still not clear. In July 2023, an obvious rockslide occurred during heavy rainfall in Changtan Town, Chongqing City, Southwest China, resulting in one death and seven houses collapsed. In this paper, back analysis in the dynamic process of the Yanghuachi (YHC) landslide triggered debris flow is carried out by the coupled particle flow model and elastic viscoplastic model. The reults indicate that the sliding body moves downward along the sliding surface, pushing the loose deposits at the lower part of the landslide to slip and then extending along the gully to the right bank of the Modao River. The overall movement duration of the landslide in the study area is approximately 180 s, with a maximum sliding velocity of about 22.08 m/s and a final deposition thickness of approximately 10.91 m. This study provides a methodology for analyzing the dynamic process of landslide triggered debris flows.
- Open Access
- 19 September 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1466751
Study on the chain-type failure mechanism of large-scale ancient landslides
Large-scale ancient landslides are widely distributed in Southwest China, yet their reactivation mechanisms remain complex and poorly understood. On 25 July 2020, one such landslide in Liujing Village, Wulong District, Chongqing, China, experienced reactivation. This event exhibited variable movement characteristics across different areas and times, ultimately manifesting as a chain-type failure. Combining field investigations and drilling works, this study describes the fundamental characteristics of the Zhongbao landslide and the variation rules of the seepage field and the stability by numerical simulations. The failure mechanism is preliminarily revealed, and the failure influencing factors are discussed. The results show that, the landslide’s progression was influenced by the stratigraphic lithology and the morphology of the sliding surface, resulting in two distinct turns during its movement. By analyzing the landslide’s spatial morphology, direction of sliding, material composition, extent of the accumulation area, and dynamic behavior, we have categorized the Zhongbao landslide into five principal zones. The failure process can be segmented into four stages: initiation, shear-out, acceleration, and accumulation blockage. Heavy rainfall served as the primary trigger for the landslide, while the microtopography of the sliding surface significantly influenced the failure dynamics. The insights gained from this study offer valuable guidance for understanding the reactivation mechanisms of similar chained ancient landslides in the geologically analogous regions of Southwest China.
- 19 September 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1466751
Open AccessStudy on the chain-type failure mechanism of large-scale ancient landslides
Large-scale ancient landslides are widely distributed in Southwest China, yet their reactivation mechanisms remain complex and poorly understood. On 25 July 2020, one such landslide in Liujing Village, Wulong District, Chongqing, China, experienced reactivation. This event exhibited variable movement characteristics across different areas and times, ultimately manifesting as a chain-type failure. Combining field investigations and drilling works, this study describes the fundamental characteristics of the Zhongbao landslide and the variation rules of the seepage field and the stability by numerical simulations. The failure mechanism is preliminarily revealed, and the failure influencing factors are discussed. The results show that, the landslide’s progression was influenced by the stratigraphic lithology and the morphology of the sliding surface, resulting in two distinct turns during its movement. By analyzing the landslide’s spatial morphology, direction of sliding, material composition, extent of the accumulation area, and dynamic behavior, we have categorized the Zhongbao landslide into five principal zones. The failure process can be segmented into four stages: initiation, shear-out, acceleration, and accumulation blockage. Heavy rainfall served as the primary trigger for the landslide, while the microtopography of the sliding surface significantly influenced the failure dynamics. The insights gained from this study offer valuable guidance for understanding the reactivation mechanisms of similar chained ancient landslides in the geologically analogous regions of Southwest China.
- Open Access
- 20 April 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Experimental test and mechanism analysis of soil crust erosion resistance of rammed earth Great Wall in rainy season
Rammed earth is a kind of cleaning material, widely used in all kinds of buildings in the world. The Great Wall of ancient China is a typical world cultural site built from rammed earth. The rammed earth Great Wall of Shanhaiguan is close to Bohai Bay, which has suffered from long-term erosion by rain, causing a series of problems such as soil loss, collapse and gully flushing. The protection materials of the rammed earth site have always puzzled scholars. However, during the rainy season, it was found that some of the walls at Xiaowan Gouge and Nantuzhuang Gouge in the Shanhaiguan Great Wall had unwashed traces, the soil surface of the walls was intact, and the anti-erosion ability of the walls was significantly higher than that of other places. In order to explore the reasons for its strong anti-erosion ability in the natural state of rammed earth wall, guide the protection of rammed earth Great Wall, and carry out different experimental tests to explore its anti-erosion reasons and internal mechanisms. Firstly, the characteristics of rammed soil were understood through the composition test of rammed soil, and the indoor and outdoor erosion test was carried out to determine that the anti-erosion reason was the protection of gray-green soil crust. The property and composition of soil crust were determined through the immersion test and genome sequencing. Finally, the protection mechanism of soil crust was analyzed by scanning electron microscopy.
- 20 April 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Open AccessExperimental test and mechanism analysis of soil crust erosion resistance of rammed earth Great Wall in rainy season
Rammed earth is a kind of cleaning material, widely used in all kinds of buildings in the world. The Great Wall of ancient China is a typical world cultural site built from rammed earth. The rammed earth Great Wall of Shanhaiguan is close to Bohai Bay, which has suffered from long-term erosion by rain, causing a series of problems such as soil loss, collapse and gully flushing. The protection materials of the rammed earth site have always puzzled scholars. However, during the rainy season, it was found that some of the walls at Xiaowan Gouge and Nantuzhuang Gouge in the Shanhaiguan Great Wall had unwashed traces, the soil surface of the walls was intact, and the anti-erosion ability of the walls was significantly higher than that of other places. In order to explore the reasons for its strong anti-erosion ability in the natural state of rammed earth wall, guide the protection of rammed earth Great Wall, and carry out different experimental tests to explore its anti-erosion reasons and internal mechanisms. Firstly, the characteristics of rammed soil were understood through the composition test of rammed soil, and the indoor and outdoor erosion test was carried out to determine that the anti-erosion reason was the protection of gray-green soil crust. The property and composition of soil crust were determined through the immersion test and genome sequencing. Finally, the protection mechanism of soil crust was analyzed by scanning electron microscopy.