Yan Zhang

Soil–bentonite (SB) vertical cut-off walls are widely utilized to mitigate the transport of soil contaminants in groundwater. Evaluating their long-term service performance is crucial for ensuring environmental safety and effective pollution control. The evaluation model for the long-term service performance of contaminant cut-off walls considers key processes such as convection, diffusion, dispersion, and adsorption. These processes are closely linked to the physicochemical properties of the cut-off walls, which are influenced by the surrounding complex environment, ultimately impacting their long-term performance. This study delves into the long-term service performance of SB vertical cut-off walls. It focuses on the key factors that influence this performance and the measures that can enhance it. Moreover, it offers a detailed analysis of how the performance of seepage cut-off walls in soil–bentonite materials evolves under various environmental influences. These influences include chemical exposure, freeze–thaw cycles, and dry–wet cycles. Additionally, it outlines existing service performance evaluation methods and identifies their shortcomings. By leveraging the advantages of in situ testing methods, this paper proposes the establishment of a comprehensive evaluation system for the service performance of vertical cut-off walls based on in situ test parameters. The proposed evaluation system aims to provide a scientific assessment of the long-term service performance of SB vertical cut-off walls.

Gassy clay, commonly encountered in coastal areas as overconsolidated deposits, demonstrates distinct mechanical properties posing risks for submarine geohazards and engineering stability. Consolidated undrained triaxial tests combined with cyclic simple shear tests were performed on specimens with varying overconsolidation ratios (OCRs) and initial pore pressures, supplemented by SEM microstructural analysis. Triaxial results indicate that OCR controls the transitions between shear contraction and dilatancy, which govern both stress–strain responses and excess pore pressure development. Higher OCR with lower initial pore pressure increases stress path slope, raises undrained shear strength (s_u), reduces pore pressure generation, and induces negative pore pressure at elevated OCR. These effects originate from compressed gas bubbles and limited bubble flooding under overconsolidation, intensifying dilatancy during shear. Cyclic tests reveal gassy clay’s superior cyclic strength, slower pore pressure accumulation, reduced stiffness softening, and enhanced deformation resistance relative to saturated soils. Cyclic pore pressure amplitude increases with OCR, while peak cyclic strength and anti-softening capacity occur at OCR = 2, implying gas bubble interactions.

The degree of the over-consolidation ratio (OCR) of silty clay affects the soil’s mechanical properties and in situ test results. The present study utilized numerical analysis to investigate the behavior of cone penetration and pore pressure dissipation in typical silty clay soils, while also taking into account the impact of the over-consolidation ratio (OCR). Effective stress finite-element analyses, which accounted for considerable deformation, were carried out at various OCRs. The model assumed the soil as a homogeneous material obeying the modified Cam Clay (MCC) model. The significant advance of this work is the evaluation of the effect of OCR on penetration resistance and pore pressure test data and the calculation formula of OCR and c_h in typical silty clay. An inversion method based on the results of piezocone penetration tests was proposed in terms of strength and the over-consolidation ratio of the silty clay, which is of great importance for the inversion of soil parameters in the Yellow River Delta region. This paper presents a consolidation coefficient inversion method of typical normally and over-consolidated silty clays and corrected the disadvantage that traditional conversion methods could not take OCR effects into account.

Bucket foundation normally used as the basis of the pipeline terminal in oilfield or wellhead manifold system, and the length-to-diameter ratio is usually between 1 and 2. In the stage of installation and operation of the pipeline, bucket foundation will sustain vertical and horizontal force, moment and torsional load from the upper structure. However, most existing equations of capacity envelopes for bucket foundations are in terms of length-to-diameter ratios less than 1, and the influence of torsional load on composite bearing capacity of bucket foundation is not considered. In this study, finite element simulations are conducted to study the interaction between soil and bucket foundation (with a length-to-diameter ratio between 1 and 2) subjected to combined loadings. The influence of torsion on uniaxial bearing capacity and VHM composite bearing capacity is discussed respectively. The results showed that the torsion can cause bucket foundation VHM of bearing capacity of composite envelope surface decrease. With regression analysis of the calculation results, calculation formula of composite bearing capacity considering the effects of torsion is summarized.